Music, Laundry, All the things in my life.
CEO of Excelsior Laundry Repair.
Speed Queen, Unimac, Huebsch, Dexter, Wascomat.
#laundry #linen #laundryequipment
#hypro #supersylon #washer #dryer
#excelsiorlaundryrepair
Videos are for informational purposes.
Why a pirate outfit? Well, why not!
Пікірлер
Door bay paas kese kare
One of the machines in my old apt building is stuck at the price and won't work with the card. Then randomly it gives a free wash 😮. Im still curious about it
Usually a card reader failure.
Slow down clown
Slow down clown
It's all a lie I try everything all videos
🤣🤣🤣. Not sure you should be. If these videos are that confusing for you and that impossible for you to do then you shouldn't be trying it.
Please make this again, a lot slower and explain each step.
If mine triple beeps and doesn’t show rapid is there another button combo
Is there a switch under the service door?
@@pistanderwhich key opens it?
That depends on the region. @@CaptainCharisma513
@@pistander I’m in Michigan
You would have to check with a local distributor@@CaptainCharisma513
How do you change the minutes on the washer for longer or less
Not all controllers are able to change time. On the controllers I have at my laundromat I can only change the number of minutes so I am locked in to a minimum of 29 minutes.
I get ed23s from time to time. It's usually an issue with the inverter board first then motor, maybe even the harness in between. My first guess honestly would be change the inverter board. The one underneath. By the way I wrote this right as you said ed23. I didn't even look at the whole video.
Código RL
Im going to change the price to 50 cents
Hello thank you for sharing, i have 2 units with faults Ed 23 and the other ,eds, 57 , fl, I transfered the board to the other machine which had the Ed23 code and one extra code come up .00, anyone with ideas?
Go to PWS and start typing in your model number slowly. If you put too many numbers in the system won't recognize. Then you will see a list of downloadable manuals. Look for programming. That will give you an error code list I believe.
@@pistander thank you very much, the model numbers have been removed but I might have some literature
Hello and thank you for your video, I have Ed23 on one machine, on another eds and 57 and fl any ideas anyone?
FL is a fill error usually. ED23 is the inverter i believe. I do not know the other two.
@@pistander thanks for your reply. Does anyone know the usual fault /part on the 803949p board, is it usually caps?
One of the worst Unimac ever made the final spin speed suck and does not extract enough water from clothes
There must be some other problem. Possible programming issue.
I use one at my job as a firefighter to wash out turn out gears and it seems to work fine
I already instal new gasket but still is leaking do you know if i need to adjusted the door ?
You should not need to adjust the door. In fact the door should be harder to close with a new seal. Take the seal off and try putting it back on. Put the slack on the side near the handle.
Can you please help me where can i get that motor control board... Plz waiting for you reply From India
PWS parts
have a front loading washer speed queen, error code E-D24
ED24 Is also an inverter board error. I would say change the inverter board.
@@thedarkphire33 this control board can be repairing, i can fix this problem
Man thank you so much for your video on programming the speed Queen. I just bought 3 new ones and didn’t know to set a straight price for all 3 cycles.. 🙏🏼💪🏼🤙🏼👍🏼🫡💯💯💯💯💯💯
Nice!
Really good information to know. I know we get our wax from Tingue Brown but I’m gonna try and see how this lube/cleaner works out. We used to have a hyrpo 1 (8 roll) and a super sylon (7 roll ) but recently replaced them with two Braun delta ironers of a similar vintage (1998 or somewhere about).If you have any more tips please make more videos on them. Thank you! 🙏
Hello nice to meet you. Do you have any mail I’d or contact number.
How do you get to the program menu??
Open the service door for 3 seconds press and hold top left button then push the button under it. Rapd, shows on screen push up arrow then you will see prog.
*Finally, a dryer that dries clothes quickly>>>**allmy.tips/speed-queen-dryer?38l** This is a well-built dryer with no-frills (like sensors and buzzers that inevitably would need repair as happened in my previous dryers). The lint catcher is the best I've ever used - so easy. Love this dryer.*
THANK YOU for posting this video!
You are welcome! I am glad it was useful!
Any idea where I can find a list of error codes for this machine? I am getting a ED21 code.
On your cd manual look in programming
pistander Thanks for the reply. I bought it used and don't have the cd but, I replaced the control board today and, that fixed the problem. Now I need to change the pricing. Any Ideas on how to find that info?
jchap04 Do you know how to get into manual mode?
No I could not even find it online. Is it a big secret?
@@jchap04 Yes, Unfortunately manufacturers do not make it easy. Go to PWS and start typing in your model number slowly. If you put too many numbers in the system won't recognize. Then you will see a list of downloadable manuals.
Does that adjustment also let it do a deep rinse instead of a spray rinse?
No this is just for temperature.
YES THERE IS! THERE IS A VIDEO ON KZread SHOWING HOW TO
The manufacturer has just extended the warranty on this inverter from 3 years to 5 years
SQ Repair 803949P Washer Motor Control Board www.ebay.com/usr/lonestarelectronics01 Lone Star Electronics. When you send us your defective control board we do more than just repair the failure. For preventative maintenance and to extend the life of your board, we replace the components that tend to fail. 1 Year Warranty!!!
He and others removed some and I removed the rest. In honor of my grandmother Alice and Great grand mother Isabelle their tributes will not be places of argument. All the myths and rumors have been dispelled and now the truth is revealed after 110 years of misinformation and people telling untruth purposely or not.
Its funny how stories get started in the lack of factual evidence but now thanks to technology.......Behold she is found and she was so close all these years. I used to work less that a mile from her grave. It really chokes me up when I think about it. 27 years old. I'm sure she was beautiful.
My dads mom was 4 when her mother died, He remarried 2 more times. So no wonder there was so much false mystery about her no one knew her and she died in Kentucky away from anyone here. How could they know anything about her when they couldnt even get her name right?
I do not know how much more evidence I can show that there are no illegitimate children in my bloodline from me previous. We all seem to know who are parents were including but not limited me, Lucille, Isabelle. I am sure that everyone meant well by telling the fancy stories but that is what they were is STORIES.
The first picture is Jonas and lucille Widrick, The second is Lucilles birth certificate showing her mother as Isabelle Hollington. Over time it appears as though people said her name wrong as haladay an alleged native illegitamate. She died at 27 in Kentucky and is buried in Syracuse NY in an unmarked grave.