Пікірлер

• 
  @TheRealRustyGrill20 сағат бұрын

  Is this printer worth it? I have not unboxed it yet. Any tips is it worth it? Any advice? Or just return it and buy something else? Thanks in advance !

• 
  @OuterRimArmorer19 сағат бұрын

  That’s a tough decision to make for someone else. I personally have had to fix a lot of stuff on mine but customer support taken care of me every time. Every printer beaks and every one of them needs maintenance. My Qidi Tech X-Max 3 printers have had less issues and worked amazingly well right out of the box but they are double the money. But I’d buy another one over two or even four bed slingers any day.

• 
  @TheRealRustyGrill18 сағат бұрын

  @@OuterRimArmorer thank you for your response!

• 
  @TheRealRustyGrill18 сағат бұрын

  @@OuterRimArmorer looking for a larger bed that does not require lots of tinkering

• 
  @NoMercyFtw20 сағат бұрын

  Noice, after seeing how awesome the SV08IS I had to try bigger so I bought a kobra 2 Max, I know it's not gonna be the same quality or standards as the SV08 but it is big as hell, for some reason I thought the cobra Max and the Neptune Max were 350mm build volumes...........

• 
  @OuterRimArmorer19 сағат бұрын

  I’m actually looking at the possibility of replacing my Anycubic Kobra 2 Max with the Sovol SV08. If I can make them more reliable than the AK2M then I’ll be swapping them out. I know they’re smaller build volume but my Anycubic won’t stop breaking down and it’s getting tiring to deal with constantly. The Elegoo’s aren’t much better. I really like the Qidi Tech X-Max 3’s I have. They’re the best so far. The K1 Max is going in the garage. It’s louder than all the rest in my office.

• 
  @NoMercyFtw19 сағат бұрын

  @@OuterRimArmorer yeah I know bed slingers aren't reliable especially at fast speeds and these ones require more maintenance and babysitting them if you want a print to succeed, with the SV08I can hit print and walk away most of the time

• 
  @fn.ll.gaming1667Күн бұрын

  thanks you helpt me to give me confidence

• 
  @OuterRimArmorer20 сағат бұрын

  Happy to help. Fixing a 3D printer is mostly a lot of tinkering or has been for me for the past couple years. Something new breaks and I have to learn how to fix it. Then try to remember to share that knowledge. Lol 😂

• 
  @3D_PrintingКүн бұрын

  Mines been great, fast quality 3D prints. I have not done any modding, yet. I have only 3D printed in PLA so far. You say one of the first ones, maybe this is why you say this.

• 
  @OuterRimArmorerКүн бұрын

  Sovol finally got back to me. Took me an hour or so but it was an issue with the printer’s configuration file. I had to change the current to the motors. They want me to do some other changes to make it print faster but said it would be louder so I’m not doing that. I’m happy printing at 250mms

• 
  @3D_Printing2 сағат бұрын

  @@OuterRimArmorer Thanking You. Added to my SV08 play list. and liked

• 
  @RodrigoSouza-zo4gi3 күн бұрын

  WHAT SPEED DO YOU USE IN YOUR PRINT?

• 
  @OuterRimArmorer3 күн бұрын

  For the Elegoo Neptune 4 printers I print between 200mms-300mms. Usually the outer perimeter I slow down and the rest I leave a little faster.

• 
  @RodrigoSouza-zo4gi3 күн бұрын

  Tank you bro. Make a video about organic support and density for large and small pieces, contact him at the piece.

• 
  @BlueHorseStudios3 күн бұрын

  I hear ya, I have the Kobra 2 and probably the worst printer Ive owned.

• 
  @hansipanzi4 күн бұрын

  some people are smart and others are dumb. for the last group is bambu lab the perfekt printer.

• 
  @OuterRimArmorer4 күн бұрын

  I don’t personally own a BambuLab printer so I can’t say for certain. My favorite printer in my collection is the Qidi Tech X-Max 3. The prints are amazing, it worked right out of the box. The build volume is big enough for armor and helmets.

• 
  @ArkySouls4 күн бұрын

  These companies get lazier and lazier

• 
  @whitebush4 күн бұрын

  At that point, why not just put it in the much more control able oven?

• 
  @tastyticklingtatertricksho77244 күн бұрын

  Is anycubic kobra max a better large printer?

• 
  @OuterRimArmorer4 күн бұрын

  Not mine. It’s always broken.

• 
  @user-yx2wn7ew9b5 күн бұрын

  I somehow put my magnetic sheet on the wrong way, should've turned it clockwise by 90% and now I've some screws inaccessible. I dread the day when I'll have to try and remove that thing, feels like concrete

• 
  @wolfphantom5 күн бұрын

  Short term temperature tolerance of up to 540 °F (280 °C) of the 3M adhesive

• 
  @dog2bert5 күн бұрын

  Heat gun

• 
  @OuterRimArmorer5 күн бұрын

  Don’t have one. Hair dryer probably won’t get it hot enough. I’m thinking I’ll leave it outside in the 90degree heat today and then try to peel it up.

• 
  @NoMercyFtw5 күн бұрын

  My Q1 pro worked right out-of-the-box still working flawless 0 problems and I preordered it, just got my SV08 the other day and then printing also flawless

• 
  @OuterRimArmorer5 күн бұрын

  My Q1’s worked right out of the box as well. Really only had one issue with one of mine and it was the cover popped off during a print and then then was ripped off. Parts coming, Easy fix. From what I’ve been reading you’re lucky with that SV08. I haven’t even opened my other box. Support hasn’t responded to any of my requests. So far I wouldn’t recommend them to my worst enemy. 👎

• 
  @NoMercyFtw5 күн бұрын

  @@OuterRimArmorer I printed two helmets so far my SV08 has been on for almost 48 hours printing non-stop

• 
  @ArkySouls5 күн бұрын

  checking this out later! just got the 4 max recently. B))

• 
  @blackfire3446 күн бұрын

  hey bud so i have the N4+ myself and cant for the life of me do the update my UI is just circling the boot up stage i cant do anything with it and update by usb isnt working either ive tried 3 diff sticks no luck and with and without the folder it hasnt made any change but i did manage to update the UI BY SD card any suggestions? elegoo just keep going in circles with each email

• 
  @OuterRimArmorer5 күн бұрын

  I’ve been having a similar issues with a Neptune 4 Plus. It never gets past the boot up screen and updating it doesn’t help. I was told that I would need to remote into the backend of klipper using a PC and connecting to the printer. I just found an old PC laptop so I might give that a try. Using a Mac has not worked for me. So long story short no I haven’t been able to fix mine with the same issue.

• 
  @blackfire3445 күн бұрын

  @@OuterRimArmorer I'm looking into the same thing too if you succeed let me know bud no one has been able to help yet

• 
  @tastyticklingtatertricksho77246 күн бұрын

  I was considering getting one til i seen this im glad i did

• 
  @Phattie7636 күн бұрын

  Warranty?

• 
  @OuterRimArmorer6 күн бұрын

  No response from the manufacture yet.

• 
  @Phattie7636 күн бұрын

  That is a shame, I found with creality they only answer if you use live chat through their app. Does sovol have something similar?

• 
  @6776calmato3 күн бұрын

  I also had a waranty problem In under 24h they send me every pieces i need! I LIKE my SV08

• 
  @mikeskerritt96183 күн бұрын

  Hi, I also have the sv08 and couldn't be happier with it. Noe, I I only had it since Tuesday of this week, and it printed fin e from the screen but when printing from Orcaslicer the the z offset was too high. I went on the Solvol forum and saw that their was an update availableI downloaded it and installed it, and the prints are fine since. Now, like every other 3d printer it needed filement tuning. I diled in some settings and as I said, I couldn't be happier.

• 
  @ArkySouls6 күн бұрын

  Unlucky bro!

• 
  @blazet98607 күн бұрын

  I'm glad I did not get one. Thanks for the heads up.

• 
  @daspicsman7 күн бұрын

  The only printer that I've had that worked right out of the box is Bambu. Absolutely everything else required a ton of tinkering to get to work and keep working. I'm never going back to anything else again.

• 
  @OuterRimArmorer7 күн бұрын

  Mine was the Qidi Tech XMax3 and the Q1 Pro. Those both worked right out of the box. No tinkering or messing around. I love the build volume of the XMax3’s as well.

• 
  @daspicsman7 күн бұрын

  @@OuterRimArmorer I’m done buying printers for a while. The amount of failures and the price of filament can be quite deflating.

• 
  @chuckshc3767 күн бұрын

  I feel you're pain my friend

• 
  @jaysteel62228 күн бұрын

  Thanks bud. Gave me the confidence to get through this myself. I appreciate it.

• 
  @MrKennykyle18 күн бұрын

  damn. was really looking for 400mm+ size printer that's not ass.

• 
  @OuterRimArmorer7 күн бұрын

  My Anycubic just broke again. I think it worked for maybe 6 prints. 🤦‍♂️👎 one of the Elegoo’s are working again. Part for my other one just arrived. I’m always repairing these printers. 🤦‍♂️ I bought the Sovol SV08 thinking maybe they could replace my bedslingers but they’re even worse. 😡 It blows me away that they ship out printers that don’t even work properly. Zero product quality control.

• 
  @MrKennykyle18 күн бұрын

  amazing review

• 
  @Struth868 күн бұрын

  Are these settings good for printing dice towers or those collapsable swords?

• 
  @OuterRimArmorer8 күн бұрын

  I haven’t tried printing those with these settings. I mainly print cosplay armor and helmets.

• 
  @fdsman9 күн бұрын

  if your bed wires are abraiding like that, you should find a cable/drag chain for it to protect the wires and prevent it from getting hooked on things or bound up. I don't know why they aren't standard on bed slinger printers, they really should be.

• 
  @OuterRimArmorer9 күн бұрын

  One of the two printers actually had a cable chain. I originally thought the cable chain caused the first one but then it happened on the second and that one didn’t have a cable chain. Weird right?

• 
  @copatjv9 күн бұрын

  Hello. Which printer would you choose, the Kobra 2 Max or the Elego Neptune 4 Max? I'm thinking of buying one of them and I have some doubts. I'm a beginner, not a professional. I have an Anicubic Kobra 2neo. Thank you very much for your advice and videos.

• 
  @OuterRimArmorer9 күн бұрын

  The answer to that question is a long one so I made a video comparing the two a while back. You should check it out. If you’ve already seen it and wanted an update on what I think, I think they all break and need to be fixed. They all need maintenance and they all require patience. Personally my favorite printer in my collection is the Qidi Tech XMax3. I’ve purchased three of them now and they are my best printers and still a big build volume.

• 
  @MontyEscoces10 күн бұрын

  Where did u buy the glass bed? I don't manage to find any beds that are the right size

• 
  @OuterRimArmorer9 күн бұрын

  I’ve never used glass so I have no idea. I’ve always switched to the flex plates.

• 
  @MontyEscoces9 күн бұрын

  @@OuterRimArmorer ooh right, I thought it was glass. But where do you buy the flex ones? I can't manage to find ANY type of bed for the n4 max

• 
  @OuterRimArmorer9 күн бұрын

  Try s.click.aliexpress.com/e/_mLsZhNQ

• 
  @MontyEscoces9 күн бұрын

  @@OuterRimArmorer alright, tysm

• 
  @ouifael10 күн бұрын

  Why not use "loctite threadlocker"...on the screws and bolts that losen....of course not on the adjustables

• 
  @gadimus11 күн бұрын

  Where is the setting called Combing... I've looked everywhere - klipper, orca slicer, settings I can't find it :D!

• 
  @OuterRimArmorer11 күн бұрын

  It’s called that in Cura Slicer. I believe Orca calls it something else. In Orca slicer look under the “Others” section I believe it’s called something like “Reduce Infill Retraction”. If I’m not mistaken it does the same exact concept as Combing in Cura. I turn that shit off too and no more support or print failures from being knocked off the bed.

• 
  @gadimus11 күн бұрын

  @@OuterRimArmorer ahhh I saw that on Reddit too but couldn't find it. I was on the "Object" tab instead of "Global" where this setting lives under Others > G-code ouput. Hopefully this helps someone else! I followed all of this in your guide, updated the firmware and some other suggestions but some models I just can't get proper adhesion even with warming everything up for 25minutes, using a gluestick, leveling beforehand, prayer, thoughts - everything so I'm hoping this works. I also kinda worry it's not looking at the right bed_mesh profile - I switched to advanced levelling mode which I think updates bed_mesh 11 it doesn't feel clear which mesh preset gets used when printing. I think the day I spent working on the eccentric nuts broke my brain a little. Edit: Some added context - this is my first FDM printer. Honestly for the price I don't mind it. This is a fun hobby. I've gone through almost 10kg of filament over just a few months so I've used it a LOT and despite some of the issues most everything has turned out OK. I learnt a hard lesson with a blob of death but had been warned to almost watch the first layer and didn't. The replacement print head was only $50 - I've spent far more than that when factoring in my time so it was fine - I'm really just lucky and happy that it didn't start a fire or something else.

• 
  @OuterRimArmorer10 күн бұрын

  ​​⁠for the adhesion issues I would suggest cleaning the flex plate really well with soap and water. Then while the first layer is printing adjust the z height. While you’re watching it you’ll see the difference in the way the first layer goes down. Do this step repeatedly until you think it looks good. I would pick a model that has a big base so you have lots of time adjusting the first layer. I do this step now on all my printers after every bed leveling I do.

• 
  @gadimus10 күн бұрын

  ​@@OuterRimArmorer thanks again! Watching the first layer and dialing in the z offset worked. I may try turning "reduce infill retraction" / combing back on to see what happens, it seems like it would really help reduce wear/tear. I have caught it clipping models in the past but I'm curious if it was related to poorly set z-offset as my retraction tests have all performed really well. I wish there was a better way than the "paper method" for z-offset. Also the magnetic auto leveling overall really is iffy - even with lower variance thresholds and more samples. Overall - this has been fun but it also makes me really appreciate resin printing.

• 
  @gadimus9 күн бұрын

  I finally got around to washing the plate with soap/water (then wipe down with a micro fiber cloth). It seems to make a huuuuge difference. It's like there were some dead zones from fingerprints or PLA crust or something that no amount of ISA/wipe downs was getting rid of. I also noticed dead center the print nozzle must have been pressed into the bed enough to flatten out the contours... It sure would be nice to actual touch sensors (but then again that'd be another thing that could break)

• 
  @LyteTec11 күн бұрын

  Love the video. What side spool holder did you print off printables? Do you have a link?

• 
  @OuterRimArmorer11 күн бұрын

  This is one of them. www.printables.com/model/672770-qidi-x-max-3-right-side-mount-spool-holder

• 
  @OuterRimArmorer11 күн бұрын

  This is the other one I made. Both worked good. I don’t use them anymore though. www.printables.com/model/597028-qidi-x-max3-side-mount-spool-holder

• 
  @Evans_Beans12 күн бұрын

  Sorry but what enclosure is that

• 
  @OuterRimArmorer12 күн бұрын

  I’m using a grow tent that holds 3 of these 420x420 build volume printers. Here’s the link to the one I’m using. I turned it onto its side rather than upright like they have it advertised. amzn.to/3WjMyJE

• 
  @tinmanbj6012 күн бұрын

  just found your Video's cause I just got a anycubic Max so having issues but I am sorting them out

• 
  @franklynfrias12613 күн бұрын

  As a dentist I must say that blue/purple light is not safe for your eyes. 8 seconds a day (approximately) can cause irreversible damaged to an extent. Please be careful and don’t over exposed yourself.

• 
  @franklynfrias12613 күн бұрын

  Great content though, thank you for sharing.

• 
  @OuterRimArmorer13 күн бұрын

  Good to know. Thank you. I’m actually building a box enclosure for curing UV resin. Should help with exposure

• 
  @Creatividad3D47613 күн бұрын

  Hola. Me parece un trabajo increíble todo lo que haces. Me podrías decir donde compras los stl para poder imprimirlos? Un saludo.

• 
  @OuterRimArmorer13 күн бұрын

  Most of my files come from Patreon memberships like Galactic Armory, Mystery Makers, Dungeons and Starships, and more. This helmet was modeled specifically by Mystery Makers. You can also find him on Etsy and other file selling platforms.

• 
  @Powie196513 күн бұрын

  Just got my 4 Max the other day, I don't know if better or worse but Elegoo completely changed the lower bed frame, it's all hollow now and more of a mesh, maybe lighter? But I worry about it flexing more. *shrug* thanks for the vid, will have to think about this, I more simply don't like the bed itself, still LOVE the Ultrabase bed on my Chiron.

• 
  @OuterRimArmorer13 күн бұрын

  Really? That’s interesting

• 
  @Mark-cj9ju14 күн бұрын

  i put the silicone bushing on and the bed is way off level by almost .25" in the back. why would it be off that much

• 
  @OuterRimArmorer14 күн бұрын

  Probably just needs to be adjusted. It takes me a couple times of manually leveling by adjusting the knobs under the bed before I get it dialed. I do it every time I’ve taken the bed off. But keep in mind I’m not a perfectionist when it comes to the bed being perfectly level. That’s what klipper is for. It’s supposed to register and compensate for unleveled beds. Also don’t forget to heat soak your bed before leveling it. Basically heat it up to 60 a few minutes before you start leveling it.

• 
  @Artbyartcreates15 күн бұрын

  I rather buy a new machine when take it apart 😩😂

• 
  @peterloader97415 күн бұрын

  I use a Heat Gun to melt the PLA off the Nozzle.

• 
  @kevinsaunders510416 күн бұрын

  Hi, quick question, my kobra 2 max makes a clicking noise when its printing but only on the left side of the bed, Have you ever had this issue? thanks in advance kev

• 
  @OuterRimArmorer16 күн бұрын

  I get a clicking sound from the x axis belt rubbing something on the right side. I haven’t been able to figure out what and it wears my belt out faster because of it. Maybe you’re hearing something similar on the left side?

• 
  @kevinsaunders510416 күн бұрын

  @@OuterRimArmorer thanks buddy, i think my clicking is coming from the bed, it only happens on certain points of the bed

• 
  @OuterRimArmorer16 күн бұрын

  @@kevinsaunders5104maybe check the wheels and see if they are dirty or need lube. They have bearings in them that can get grim inside. I’ve also found junk like the stringing crap gumming up the works on my printer.

• 
  @kevinsaunders510415 күн бұрын

  @@OuterRimArmorer Magic problem solved, it was the rear lower wheel on the extruder, it has a nut to adjust it and my wheel was very tight, quarter turn clicking all gone thanks for coming back to me

• 
  @OuterRimArmorer15 күн бұрын

  That is an eccentric nut. If you use your printer often I would make it a habit to check those often. There is probably six of them on your printer. Mine move and loosen from all of the vibration and movement of the machine.

• 
  @craigdvance16 күн бұрын

  is the linear rail update worth it? and if so would you recommend everything?

• 
  @OuterRimArmorer16 күн бұрын

  I do like my Elegoo’s more now that I’ve done the linear rails. I wouldn’t bother with the z axis rails. I might order the x axis rails next but those Pom wheels are easier to replace and don’t seem to wear out as fast as the ones on the y axis.

• 
  @blazet986016 күн бұрын

  Maybe that's why.... I got to it too late.

• 
  @OuterRimArmorer16 күн бұрын

  I didn’t have the funds to take advantage of any of the sales which sucks because now I need filament and it’s $10 more. 🤦‍♂️ That’s the store of my life though. Lol

• 
  @craigdvance16 күн бұрын

  One thing I just noticed on my 4max is that the bed is getting wobble, I need to figure out how to tighten that down

• 
  @OuterRimArmorer16 күн бұрын

  Your POM wheels may just need some adjusting. If you find that no matter which way you turn the eccentric nuts/spacers the wobble doesn’t go away, then you may have worn down POM wheels. Mine were grooved pretty bad when I replaced mine. Also it doesn’t matter which what you turn the eccentric nut. It’s really just a lopsided spacer that’s thicker on one side. It will either tighten or loosen. If it never tightens then it could be time for new wheels or linear rails.

• 
  @craigdvance17 күн бұрын

  I am pretty much done with my Neptune 4 Max, it is so hit or miss. I just need something that is going to work. It's a means to an end for me, not a lifestyle, lol. Got the big glob of death on my hot end this weekend after 6 months of luck. But even after using a lot of the advice online I still don't get a clean first layer across the entire build plate. Looking at a replacement that I can do bigger stuff. I have a prusa MK3 which is BULLETPROOF, never had any issues over 5 years with it, but the neptune...... damn. I haven't done any of the rail replacement or hardware replacement just tweaks.

• 
  @HolyBanana-14117 күн бұрын

  I don’t know what’s going on but whenever I print a big print it always just keeps scraping the inside in its poking up so you can hear it scraping against those and I don’t know how to fix it does anyone know how?

• 
  @OuterRimArmorer16 күн бұрын

  It’s probably the most infill pattern you’re using but it could be another setting like combing mode depending on the slicer you’re using it might be called something different.

• 
  @blazet986017 күн бұрын

  I can't copy that, so I typed it and got the uh-oh something went wrong on our end messge. Even after I redid it.

• 
  @OuterRimArmorer16 күн бұрын

  I think the link might be broken now that the prime day deals are over but I’ll see if I can switch the link to one of my other Amazon lists.

• 
  @REANZTV17 күн бұрын

  Is the noise from your neptune 4?

• 
  @petroskoronidis349018 күн бұрын

  I would like to thank you for the review! Just Perfect! I am R&D expert and I am designing industrial products with big assemblies. My scope is to make a fast prototyping for my exterior design (few parts). Several times the size of the parts could be more than 250x250x250 that many 3D printers are offering. Do you think that an affordable 3D printer like Anycubic Kobra2Max is good for me? Do you think that I should choose an Bambulab P1S and if it is necessary to stick parts? Anycubic Kobra2Max can print with other material (ABS, TPU, PETG) or in practice PLA is the only choice? (I cannot find the bed temp for Kobra2Max) I will appreciate if you could provide a reply? Thank you

• 
  @OuterRimArmorer16 күн бұрын

  So far my favorite printer, my go-to first every time are my Qidi X-Max 3’s. Second would be my Qidi Q1 Pro’s. Don’t get me wrong, they have their failed prints too but the quality and speed is amazing. I believe the print volume of the xmax3 is 325x325 which is big enough for a lot of stuff. I think my modded Elegoo’s are my first choice between my Big Bed slingers but if I can fit the item on a Xmax3 or Q1 Pro then I’ll do that first.

• 
  @petroskoronidis34907 күн бұрын

  ​@@OuterRimArmorer Thank you a lot for your reply. I agree that Qidi X-Max3 is an excelent choice. I am also checking the combination of elegoo and Flashforge Adventurer 5M Pro together. The cost of 2 is almost equal with the cost of Qidi X-Max3. Of course, I am thinking that I am loosing the advantage to print in some more industrial materials with the choice of 2 printers. I am under consideration for the appropriate choice. Congrats for your reviews

• 
  @Azmodon20 күн бұрын

  7:35 literally the issue I've been having my first week, that was just solved tonight by using anycubics slicer. Their own test prints came out as nothing but strings, and their Cura profile caused a perfect purge line, but as soon as the actual print began... I printed 2 walls as a circle, it made a crescent shape that was 1 mm x 3mm ... so 3mm^3 per mm instead of 0.08 . The extruder would then stutter making progressively higher pitched whining while pumping out spotty globs, then seize and every 3rd time give me the "NTC abnormal" error... 5 days of back and forth tearing the machine apart with their tech support and I just tried their own slicer to check... prints perfectly... they shouldn't even claim to support Cura. Now I have to explain this to their tech person