To everyone. Had one in the wall and let flash always for weeks. Had a quick power outage and it worked again flawlessly. Something defiantly to do with the cap.
@grzegorzsurman44345 күн бұрын
Great Video! Very helpful. I have three of these cameras with the exact issue. Would you mind sharing the brand of your tool set? Especially the flat tweezers you used to pull on the ribbon cables? Thanks in advance.
@sixpackyoung96988 күн бұрын
There is a big trick, after you installed it, it charges very very slow only 100 miles in 12 hours of charge, After spending hours with GM EV concierge, found out these GM Ultimum chargers are preset for the 220 outlet charging speed unless you increase the flow and AMP on the Ultium app which is On Star call registration required. It's finally back to normal. I finally understand that they can not set the charging flow to the fastest level because in case you are using the 220 outlet it can cause damage.
@AR-tz3bc13 күн бұрын
That doesn’t look sport 🙈🙈
@SteveMurphy-m4v16 күн бұрын
Mine was installed but unit getting no power. Any ideas?
@mickster178018 күн бұрын
humpty dumpty
@sixpackyoung969818 күн бұрын
Mine got installed but it slow charging as hell.I already have 200 miles juice left, but the car said expecting the charging complete at 11am not the next day but the day after.
@auronedgevicks773920 күн бұрын
Can you make a video on how to DIY change tires? I don't think there's any information anywhere on how to jack up the car using a floor jack
@kissimmeedisney21 күн бұрын
Great video, I have a question. Is there a seal on the headlights that I can put extra sealer on? The reason I ask is my tail light assembly has about an inch of water in it. All warranty claims are denied because "Water intrusion is an act of nature and not a covered item" according to the dealership. I am in Florida and we have torrential rains almost daily from June to November, and I don't want the tail light replacement to be a monthly expense. Thank you in advance 😊
@clintc853322 күн бұрын
Nice job, I was not going to try to resale my old emblems. I used a box cutter with a new razor blade and slid an old credit card between the emblem and the grill and squeezed the razor blade in between them and cut the clips off. The credit card was an extra step to help from not damaging the grill with the blade. Hope this helps
@Ray_Ray3 күн бұрын
I was thinking of doing something like that?? How effective was it?? Don’t care if clips break Would poke them out with a flat head or something of the sort This was is hella time consuming for something so simple You literally wouldn’t even need tools Just push in with fingers
@vathnamean715526 күн бұрын
Thanks for your video. Quite clear instructions. Should you need app to control start/stop charging? I am outside of US. Seems there is no app available for download.
@brianpolley957828 күн бұрын
No crush washers on the drain plug? What about the plug torque spec and the filter torque? Most cars I own have this info and require a crush washers.
@TomBrunner-jt2mdАй бұрын
Video is very much appreciated. IMO. As said in the video….the product is good EXCEPT FOR THE switch. It’s too small, too hard to see, too hard to reach and made of very fragile plastic barely held in place. Upon making final wire connections ( hard wired) the switch broke off. Poor design and placement.
@YoungFree213Ай бұрын
so question if you can help me with this. my 2019 XT5 lower grille got wrecked due to highway debre. Do you have to take off the entire front grille to access the bottom grille? i tried looking around and had no luck on finding someone replacing one
@DavidWaltermyerАй бұрын
@@YoungFree213 yes, that's gonna to be the easiest way. I have a video on removing the front bumper cover. It's really not too bad
@Soulartist13Ай бұрын
Thanks for this review. I also emailed them a few times and am still waiting for a response.
@djs6780Ай бұрын
Appreciate the Cadillac CTS videos you’re very thorough. Good job.
@ray85158Ай бұрын
I wish all manufactures would put a usb port in the side of the housing in the center of the windshield by the rearview mirror. I know some do, but it as perfect to run connect a dash cam without running wires.
@practicerepoАй бұрын
I was wondering, if you or anyone has heard of a problem with water getting in behind the door handles, if so any suggestions to prevent this? I take it you could tighten them from the inside? Any other ideas? Silicone seal or spray?
@practicerepoАй бұрын
The GM service bulletin it says (at the bottom of the page) that no parts are required for this repair. How can they say that? Not as far as the steering is concerned, yeah I get that but it won't fix the problem without replacing the thermostat and the sensor (best to replace both while the top end is ripped off it) David, did they replace both in your case?
@DavidWaltermyerАй бұрын
my thermostat was replaced. The service bulletin is a starting point: "Diagnose the P0128 - Engine Coolant Temperature (ECT) Below Thermostat Regulating Temperature using procedures in SI. Once the P0128 is resolved, the Steering Gear U0401 can be cleared."
@davidwoods914Ай бұрын
How do you change the license plate light on a xt5
@practicerepoАй бұрын
I bought a used 2017 just 10 days ago and "BAM" what the heck are you kidding me !!! I just got the message on the dash. I knew it was possible but really - I hope this car doesn't turn into a huge lemon. I had to pull teeth from the wife in order to get this car as she wanted to buy a newer but cheaper car other than the Cadillac. Now she is freaking out on me. For someone who has gone through cancer - I really don't need this stress in my life. I only got 10 days to enjoy this car - did the dealership know about this and cleared the codes just before I bought it? That's what I wanna know. Very disappointing to say the least. I did pay for an extended warranty but have not confirmed this is covered. The warranty cost me $3500 CA so it better be. . . Things like this - is why people go postal - I can't blame them. To know they screwed me is the worst, the car is in great shape with only 74,000 Kms I feel like I was shafted.
@practicerepoАй бұрын
Update: I did what a few people had said to try - disconnected the NEG battery terminal for a min or so. It does work, it will buy me some time, at least my electric fan isn't going to burn out from racing and my temp gauge is now working once again. It will take two weeks for the parts to come in. I'm sure I'll have to do this a few more times. We shall see.
@practicerepoАй бұрын
I have put on over 200 clicks and all is good, message has not returned. The bottom line : All is working normally, so Is it good or bad ??? I'm still waiting for the garage to call me when they get the parts but it will still cost me $200 as per extended warranty deductible. Everything these days is a money grab.
@ksssilverАй бұрын
Thank you. Perfect.
@rgmichelАй бұрын
The hitch install involves the total replacement of the Lyriq's original bumper that is under the plastic. I ask for the original bumper to be retained for me, and was impressed with its lightness. The new bumper is steel and very heavy. I speculate about two things: First, how the rest of the Lyriq must be built with light materials, which is a comment on how heavy the battery must be as the car is so heavy, and the likely performance of the new and old bumpers when rear ended.
@rgmichelАй бұрын
I had mine installed. I will probably post pictures eventually on the Cadillac Forums web site. I have not dismounted the removable part yet, but I have one observation. When I first looked at it, I could not find the chain rings. I called the manufacturer, and they sent an outline drawing that showed the rings, and then it was clear that they were so deep up underneath the bumper that they are impossible to find unless you know they are there. I have yet to hook up my boat. Might have to make a bigger hole to reach the chains in there. No question, this hitch does not despoil the Lyriq rear end.
@gregmartin1757Ай бұрын
Having full confidence in what you were doing was your mistake. Your installation wasn't to nec codes and obviously the work of a non professional overconfident homeowner type .why do people like you who obviously aren't professionals post videos showing other people how ? So they can get it wrong as well ? You people need to stop already.
@fishyduckyАй бұрын
Dude. Thank you so much for this video. You’re the real MVP.
@dedee2230Ай бұрын
Your video was very informative and helpful
@sensfan204Ай бұрын
watching you do this while leaving it in the box was infuriating
@pro-modtoddlyle5673Ай бұрын
David - Need to know how to do the passenger side accuator. Do you have any videos on that
@markrandazzo9370Ай бұрын
I do not recommend back feeding this without a proper fitting. You could easily damage the feeder wires. It should have been bottom fed. Contact a qualified licensed electrician.
@andyaustin92602 ай бұрын
I’m so glad u posted this, you’re dead nuts on and saved me multiple times visits. Monitored my voltage a bit and decided to change the annoying battery! Fixed!!! I really appreciate your education on this
@nvyemdrain2 ай бұрын
I bit the bullet and did this install on my 23DE RWD. Took me about 3 hours, going slow and being careful so as to break or scratch anything. Your video made it easy to do. One thing that would be nice to add is how to install the wiring connections for the tow lights if you don't have harness that comes ready to plug in to. Probably means splicing in.
@robertlovik61732 ай бұрын
Great video Sir where did the 3rd actuator connect?? located on top??
@practicerepo2 ай бұрын
To everyone. . . I'm not sure what the laws are in your state or province, but it may vary as to whether the "carrier box" must have working brake and signal lights. It would be best to contact your local law enforcement office and inquire before you take the road trip. I live in Ontario Canada and they are sticky here on regulations. Therefore, depending on where you travel this might or might not be okay. If you could change the angle of the hitch, you should have better visibility as a driver (plus the camera) and the person behind you - to see all of your lights. I know this requires a modification to the hitch itself, but from the side view (7:37 mark ) on your video, it looks possible to change the angle and re-weld it. You would still have lots of ground clearance. Plus if it was also on a 90 degree, it would be easier to modify the rack for bicycles too. (just a thought)
@practicerepo2 ай бұрын
I see why you returned it. That's the grief of ordering online.
@practicerepo2 ай бұрын
I thought you had a 2017 - Did you trade in your XT ? Well, congrats... I enjoy your channel. Glad to see your accepting comments. Finally, I get my XT next week.
@DavidWaltermyer2 ай бұрын
Kind of...it's still 'in the family' - my in-laws bought it from me when I purchased the LYRIQ. So currently it lives about 5 houses from me. Will likely end up doing some more videos as things come up on it. Thanks for watching,
@practicerepo2 ай бұрын
Oh sweet, that worked out well then. I was wondering if you ever looked into a0n upgrade on the 2017 that adds the volume control to the center console? When I took mine for a test drive, I discovered I don't like the touch slider. Does anybody even make one of these kits? I thank you in advance Sir.
@DavidWaltermyer2 ай бұрын
@@practicerepo I use the volume buttons on the steering wheel
@jeromepatten87632 ай бұрын
I have a 2017 XT 5 base modal and a 2017 XT 5 platinum my auto stop won’t shut off when I stop anymore the dealer said when it’s hot outside it won’t shut off when I stop. Question: is that true or is it the battery?
@rgmichel2 ай бұрын
So, does the hitch software on the Lyriq, the camera views and so on, work just as well with the torklift as with the GM authorized part? I understand the cams look at the hitch so you can see what you are doing while backing up and so on. Was that satisfactory after you did the installation and did some towing??
@DavidWaltermyer2 ай бұрын
Great question! It does! Supercruise gives a warning about a trailer being installed when I have my hitch mounted box back there, and won't do auto-lane changes, but works great otherwise. Check out my cargo box video for more info on the subject. I cover software, camera views, visibility, etc.
@rgmichel2 ай бұрын
@@DavidWaltermyer I read, in some GM literature I believe, that the software does not do auto-lane changes when there is a trailer attached, so it sounds like the hitch does not affect the designed full functionality of the software. That is good news, so I can proceed with the install. The box containing the hitch arrived at my house today, and I have an installer to do the work. Thanks for your help with this!
@DavidWaltermyer2 ай бұрын
@@rgmichel you are correct, that is the intended operation of the software. Enjoy, I think the ecohitch is really neat!
@richards7332 ай бұрын
Great video. I may even get up enough nerve to try it ! Keep your videos coming!
@jwashington412 ай бұрын
Thanks for your vids ! You’ve saved me from agony w/ my 18 xt5 Xt6 coming for all my haters s/o to all caddy drivers 🫡🍾
@readymillo92 ай бұрын
Thanks
@user-zb7mi4xg8q2 ай бұрын
We just had our 2019 steering assist light come on......Took the info from this video to the dealer......Bottom line they covered it under the Power Train Warranty! Well done David !!! Thanks!!!!!!!!!
@Failure_Is_An_Option17 күн бұрын
Took my mum's 2019 to the dealer today. No work performed... because it never set a code.
@MarkJensen-kq1kh2 ай бұрын
Your vids on how to do stuff on your XT5 are the absolute best. You've inspired me to try this on my own XT5 as well--I've always enjoyed and wanted to this kind of thing--and now that i'm kind of housebound i have some time to do it. My problem is that now i am trying to replace the rear bumper fascia appliques(the 2 chrome strips set into the thing) and there are no videos by anyone on removing the rear bumper cover, nor access to instruction manuals or decent instructions about it. I'm kind of slowly groping my way along but it's hard to see what lies ahead. Can you give me any suggestions? Or better yet, do a video of your own of that on your own XT5! Thanks............................
@DavidWaltermyer2 ай бұрын
Thank you! I haven't had a need to remove it so far. That being said I can provide some clues. Generally on GM vehicles the rear cover will be similar to the front. Pull off the wheel arches, there should be a single bolt behind the wheel liner, and most of the rest will be clips. If you look at my XT5 tail light video that should help get you started.. Also if you look at my LYRIQ hitch video that might provide some general guidelines as GM tends to follow the same design for attaching these covers. Good luck!
@annisanni2 ай бұрын
How did you install the ground and Black wire ? the screws are not straight/reachable with straight screw driver and I can't get them tightened.
@edf15842 ай бұрын
This is a common problem with the GM 3.6 V6 at 50-60k. The dealer will replace if still under powertrain warranty; if not expect $1,200 -$1,500 bill. Dealers have a high overhead and charge a lot of money for repairs. Most professional garages (I'm not talking about the corner gas station) can fix for little more than half the cost. But it is a pain in the rear to replace, about 3-5 hours work depending on how familiar the mechanic is with the repair. I'd talk to your independent shop and politely ask them if they have experience with GM 3.6 V6 with the P0128 code. My mechanic just rolled his eyes and said "You've got to be kidding me. At least one a month."
@bige20122 ай бұрын
You can’t just skip taking the plastic under shield off. 😂
@caddyzig3 ай бұрын
Another informative video! Great job. Thank you for putting it together.
@thenetworkarchitectchannel3 ай бұрын
Cool channel. I subscribed. We have a a 23 DE in stellar black.
@DavidWaltermyer3 ай бұрын
Hey! Thanks so much! I've been watching your LYRIQ videos, especially before I took delivery of mine. :)
@nycplayboy783 ай бұрын
Awesome video Dave thank you so much for sharing :)
Пікірлер
Thank You!
To everyone. Had one in the wall and let flash always for weeks. Had a quick power outage and it worked again flawlessly. Something defiantly to do with the cap.
Great Video! Very helpful. I have three of these cameras with the exact issue. Would you mind sharing the brand of your tool set? Especially the flat tweezers you used to pull on the ribbon cables? Thanks in advance.
There is a big trick, after you installed it, it charges very very slow only 100 miles in 12 hours of charge, After spending hours with GM EV concierge, found out these GM Ultimum chargers are preset for the 220 outlet charging speed unless you increase the flow and AMP on the Ultium app which is On Star call registration required. It's finally back to normal. I finally understand that they can not set the charging flow to the fastest level because in case you are using the 220 outlet it can cause damage.
That doesn’t look sport 🙈🙈
Mine was installed but unit getting no power. Any ideas?
humpty dumpty
Mine got installed but it slow charging as hell.I already have 200 miles juice left, but the car said expecting the charging complete at 11am not the next day but the day after.
Can you make a video on how to DIY change tires? I don't think there's any information anywhere on how to jack up the car using a floor jack
Great video, I have a question. Is there a seal on the headlights that I can put extra sealer on? The reason I ask is my tail light assembly has about an inch of water in it. All warranty claims are denied because "Water intrusion is an act of nature and not a covered item" according to the dealership. I am in Florida and we have torrential rains almost daily from June to November, and I don't want the tail light replacement to be a monthly expense. Thank you in advance 😊
Nice job, I was not going to try to resale my old emblems. I used a box cutter with a new razor blade and slid an old credit card between the emblem and the grill and squeezed the razor blade in between them and cut the clips off. The credit card was an extra step to help from not damaging the grill with the blade. Hope this helps
I was thinking of doing something like that?? How effective was it?? Don’t care if clips break Would poke them out with a flat head or something of the sort This was is hella time consuming for something so simple You literally wouldn’t even need tools Just push in with fingers
Thanks for your video. Quite clear instructions. Should you need app to control start/stop charging? I am outside of US. Seems there is no app available for download.
No crush washers on the drain plug? What about the plug torque spec and the filter torque? Most cars I own have this info and require a crush washers.
Video is very much appreciated. IMO. As said in the video….the product is good EXCEPT FOR THE switch. It’s too small, too hard to see, too hard to reach and made of very fragile plastic barely held in place. Upon making final wire connections ( hard wired) the switch broke off. Poor design and placement.
so question if you can help me with this. my 2019 XT5 lower grille got wrecked due to highway debre. Do you have to take off the entire front grille to access the bottom grille? i tried looking around and had no luck on finding someone replacing one
@@YoungFree213 yes, that's gonna to be the easiest way. I have a video on removing the front bumper cover. It's really not too bad
Thanks for this review. I also emailed them a few times and am still waiting for a response.
Appreciate the Cadillac CTS videos you’re very thorough. Good job.
I wish all manufactures would put a usb port in the side of the housing in the center of the windshield by the rearview mirror. I know some do, but it as perfect to run connect a dash cam without running wires.
I was wondering, if you or anyone has heard of a problem with water getting in behind the door handles, if so any suggestions to prevent this? I take it you could tighten them from the inside? Any other ideas? Silicone seal or spray?
The GM service bulletin it says (at the bottom of the page) that no parts are required for this repair. How can they say that? Not as far as the steering is concerned, yeah I get that but it won't fix the problem without replacing the thermostat and the sensor (best to replace both while the top end is ripped off it) David, did they replace both in your case?
my thermostat was replaced. The service bulletin is a starting point: "Diagnose the P0128 - Engine Coolant Temperature (ECT) Below Thermostat Regulating Temperature using procedures in SI. Once the P0128 is resolved, the Steering Gear U0401 can be cleared."
How do you change the license plate light on a xt5
I bought a used 2017 just 10 days ago and "BAM" what the heck are you kidding me !!! I just got the message on the dash. I knew it was possible but really - I hope this car doesn't turn into a huge lemon. I had to pull teeth from the wife in order to get this car as she wanted to buy a newer but cheaper car other than the Cadillac. Now she is freaking out on me. For someone who has gone through cancer - I really don't need this stress in my life. I only got 10 days to enjoy this car - did the dealership know about this and cleared the codes just before I bought it? That's what I wanna know. Very disappointing to say the least. I did pay for an extended warranty but have not confirmed this is covered. The warranty cost me $3500 CA so it better be. . . Things like this - is why people go postal - I can't blame them. To know they screwed me is the worst, the car is in great shape with only 74,000 Kms I feel like I was shafted.
Update: I did what a few people had said to try - disconnected the NEG battery terminal for a min or so. It does work, it will buy me some time, at least my electric fan isn't going to burn out from racing and my temp gauge is now working once again. It will take two weeks for the parts to come in. I'm sure I'll have to do this a few more times. We shall see.
I have put on over 200 clicks and all is good, message has not returned. The bottom line : All is working normally, so Is it good or bad ??? I'm still waiting for the garage to call me when they get the parts but it will still cost me $200 as per extended warranty deductible. Everything these days is a money grab.
Thank you. Perfect.
The hitch install involves the total replacement of the Lyriq's original bumper that is under the plastic. I ask for the original bumper to be retained for me, and was impressed with its lightness. The new bumper is steel and very heavy. I speculate about two things: First, how the rest of the Lyriq must be built with light materials, which is a comment on how heavy the battery must be as the car is so heavy, and the likely performance of the new and old bumpers when rear ended.
I had mine installed. I will probably post pictures eventually on the Cadillac Forums web site. I have not dismounted the removable part yet, but I have one observation. When I first looked at it, I could not find the chain rings. I called the manufacturer, and they sent an outline drawing that showed the rings, and then it was clear that they were so deep up underneath the bumper that they are impossible to find unless you know they are there. I have yet to hook up my boat. Might have to make a bigger hole to reach the chains in there. No question, this hitch does not despoil the Lyriq rear end.
Having full confidence in what you were doing was your mistake. Your installation wasn't to nec codes and obviously the work of a non professional overconfident homeowner type .why do people like you who obviously aren't professionals post videos showing other people how ? So they can get it wrong as well ? You people need to stop already.
Dude. Thank you so much for this video. You’re the real MVP.
Your video was very informative and helpful
watching you do this while leaving it in the box was infuriating
David - Need to know how to do the passenger side accuator. Do you have any videos on that
I do not recommend back feeding this without a proper fitting. You could easily damage the feeder wires. It should have been bottom fed. Contact a qualified licensed electrician.
I’m so glad u posted this, you’re dead nuts on and saved me multiple times visits. Monitored my voltage a bit and decided to change the annoying battery! Fixed!!! I really appreciate your education on this
I bit the bullet and did this install on my 23DE RWD. Took me about 3 hours, going slow and being careful so as to break or scratch anything. Your video made it easy to do. One thing that would be nice to add is how to install the wiring connections for the tow lights if you don't have harness that comes ready to plug in to. Probably means splicing in.
Great video Sir where did the 3rd actuator connect?? located on top??
To everyone. . . I'm not sure what the laws are in your state or province, but it may vary as to whether the "carrier box" must have working brake and signal lights. It would be best to contact your local law enforcement office and inquire before you take the road trip. I live in Ontario Canada and they are sticky here on regulations. Therefore, depending on where you travel this might or might not be okay. If you could change the angle of the hitch, you should have better visibility as a driver (plus the camera) and the person behind you - to see all of your lights. I know this requires a modification to the hitch itself, but from the side view (7:37 mark ) on your video, it looks possible to change the angle and re-weld it. You would still have lots of ground clearance. Plus if it was also on a 90 degree, it would be easier to modify the rack for bicycles too. (just a thought)
I see why you returned it. That's the grief of ordering online.
I thought you had a 2017 - Did you trade in your XT ? Well, congrats... I enjoy your channel. Glad to see your accepting comments. Finally, I get my XT next week.
Kind of...it's still 'in the family' - my in-laws bought it from me when I purchased the LYRIQ. So currently it lives about 5 houses from me. Will likely end up doing some more videos as things come up on it. Thanks for watching,
Oh sweet, that worked out well then. I was wondering if you ever looked into a0n upgrade on the 2017 that adds the volume control to the center console? When I took mine for a test drive, I discovered I don't like the touch slider. Does anybody even make one of these kits? I thank you in advance Sir.
@@practicerepo I use the volume buttons on the steering wheel
I have a 2017 XT 5 base modal and a 2017 XT 5 platinum my auto stop won’t shut off when I stop anymore the dealer said when it’s hot outside it won’t shut off when I stop. Question: is that true or is it the battery?
So, does the hitch software on the Lyriq, the camera views and so on, work just as well with the torklift as with the GM authorized part? I understand the cams look at the hitch so you can see what you are doing while backing up and so on. Was that satisfactory after you did the installation and did some towing??
Great question! It does! Supercruise gives a warning about a trailer being installed when I have my hitch mounted box back there, and won't do auto-lane changes, but works great otherwise. Check out my cargo box video for more info on the subject. I cover software, camera views, visibility, etc.
@@DavidWaltermyer I read, in some GM literature I believe, that the software does not do auto-lane changes when there is a trailer attached, so it sounds like the hitch does not affect the designed full functionality of the software. That is good news, so I can proceed with the install. The box containing the hitch arrived at my house today, and I have an installer to do the work. Thanks for your help with this!
@@rgmichel you are correct, that is the intended operation of the software. Enjoy, I think the ecohitch is really neat!
Great video. I may even get up enough nerve to try it ! Keep your videos coming!
Thanks for your vids ! You’ve saved me from agony w/ my 18 xt5 Xt6 coming for all my haters s/o to all caddy drivers 🫡🍾
Thanks
We just had our 2019 steering assist light come on......Took the info from this video to the dealer......Bottom line they covered it under the Power Train Warranty! Well done David !!! Thanks!!!!!!!!!
Took my mum's 2019 to the dealer today. No work performed... because it never set a code.
Your vids on how to do stuff on your XT5 are the absolute best. You've inspired me to try this on my own XT5 as well--I've always enjoyed and wanted to this kind of thing--and now that i'm kind of housebound i have some time to do it. My problem is that now i am trying to replace the rear bumper fascia appliques(the 2 chrome strips set into the thing) and there are no videos by anyone on removing the rear bumper cover, nor access to instruction manuals or decent instructions about it. I'm kind of slowly groping my way along but it's hard to see what lies ahead. Can you give me any suggestions? Or better yet, do a video of your own of that on your own XT5! Thanks............................
Thank you! I haven't had a need to remove it so far. That being said I can provide some clues. Generally on GM vehicles the rear cover will be similar to the front. Pull off the wheel arches, there should be a single bolt behind the wheel liner, and most of the rest will be clips. If you look at my XT5 tail light video that should help get you started.. Also if you look at my LYRIQ hitch video that might provide some general guidelines as GM tends to follow the same design for attaching these covers. Good luck!
How did you install the ground and Black wire ? the screws are not straight/reachable with straight screw driver and I can't get them tightened.
This is a common problem with the GM 3.6 V6 at 50-60k. The dealer will replace if still under powertrain warranty; if not expect $1,200 -$1,500 bill. Dealers have a high overhead and charge a lot of money for repairs. Most professional garages (I'm not talking about the corner gas station) can fix for little more than half the cost. But it is a pain in the rear to replace, about 3-5 hours work depending on how familiar the mechanic is with the repair. I'd talk to your independent shop and politely ask them if they have experience with GM 3.6 V6 with the P0128 code. My mechanic just rolled his eyes and said "You've got to be kidding me. At least one a month."
You can’t just skip taking the plastic under shield off. 😂
Another informative video! Great job. Thank you for putting it together.
Cool channel. I subscribed. We have a a 23 DE in stellar black.
Hey! Thanks so much! I've been watching your LYRIQ videos, especially before I took delivery of mine. :)
Awesome video Dave thank you so much for sharing :)