Great. I’m looking at doing this, thanks. Do you have a link for the exhaust
@davidfish56932 ай бұрын
What about dpf filter and the computer ecu and how did you deal with that
@Adrian-zt8fo3 ай бұрын
Thanks for the great video, I’m about to do exactly what you did, got the bits, ready to go, very informative and clear on what I need to do, thanks again, cheers
@wg57354 ай бұрын
Fundamental question: how do you know that the tub of vehicle is strong enough to carry canopy plus roof top tent e.g. possibly 300 kg (and additionally people sleeping in the tent in the stationary position) ?
@bazman6664 ай бұрын
Hey mate , where did you get the internal support system for the canopy ? I'm trying to do the same but can't find tge internal support system
@humbertron10004 ай бұрын
Purchased through an arb dealer mate, they should be able to sort you out
@ddroz235 ай бұрын
looks like a fun time. I still got to what for a reasonably priced downpipe for my 2.3l turbo gas Ranger here in the US. We don't get the cool diesel models in North America. We still have our gun so I can't get to upset.
@craigsmith78935 ай бұрын
Hi mate, Loved the video. One question though, is the brace kit from ARB or from elsewhere . Cheers
@humbertron10005 ай бұрын
Thankyou mate. Yes, the brace kit is from arb
@muntee336 ай бұрын
Handy tip, in my opinion. Use a step down drill bit. (Cone shaped drill bit.) That way you cutting from the inside diameter face of the hole outwards, instead of down through the paint. If you must use a hole saw bit or spade bit, definitely tape them over first. And for good measure, finish off with a light touch with a chamfer bit, just to take the edge off a touch so it doesn't catch on threads and whatnot.
@rosscosteamtrain905 Жыл бұрын
Hey mate I'm wanting to make my 2021 Ford Everest Trend sound louder and I like what you've done,is it possible to do with mine
@dirkydeeds Жыл бұрын
Excellent video, thanks so much. Wasn't sure what was involved with the ARB strengthening kit and this vid was perfect.
@user-zw9ve5wy5m Жыл бұрын
Hey mate does tgis car have dpf with the exhaust or did u get a dpf delete
@mjpt57 Жыл бұрын
Just got the Ascent canopy fitted to the Ranger (2020 model). Wish you showed the brackets being fitted to the window frames inside. Looks good, though. I just want one rack for the rear and one over the roof of the cabin. Mainly to strap down long lengths of poly pipe and the like.
@nicholaspallett9070 Жыл бұрын
Great video mate 👍
@woody7187 Жыл бұрын
Hi mate. Great video. Did you install the canopy yourself also? I’m sure it can’t be to hard but just need a bit of confidence to have a go
@wyrdplae8586 Жыл бұрын
thanks king!
@Dude6311 Жыл бұрын
Exactly what I was looking for!
@ericwarwick4223 Жыл бұрын
Where did you buy it from and price
@brodiebruce7133 Жыл бұрын
Great video. How much weight can the bars and canopy hold? Enough for a roof top tent?
@humbertron1000 Жыл бұрын
Sorry for the late reply, from Memory, the bars are only good for around 20kg each (off the top of my head) however, we have had our rooftop tent and awning hanging off ours for a few year and always slept 2 adults and a child. No issues so far but I'll leave that big dicision upto you :)
@rhiannonevans475 Жыл бұрын
how much weight can it hold?
@humbertron1000 Жыл бұрын
Sorry for the late reply, from Memory, the bars are only good for around 20kg each (off the top of my head) however, we have had our rooftop tent and awning hanging off ours for a few year and always slept 2 adults and a child. No issues so far but I'll leave that big dicision upto you :)
@paulclissold1525 Жыл бұрын
Your disrespect for black friday is noted many people lost there lives its the reason we have a cfa.
@humbertron1000 Жыл бұрын
Of course Australia's Black Friday was a terrible incident and my heart goes out to everyone involved. However, Black Friday sales have nothing whatsoever to do with them. Sorry to offend you good sir
@paulclissold1525 Жыл бұрын
@@humbertron1000 if you dont honour your heritage what do you honour. This isnt a yankee problem this is our community not recognising and not remembering a tragedy which shaped the world l grew up in. My father was in a mountain ash forest when it swept through only a wind change saved him. Nothing like two hundred foot giants going off like penny bangers.
@FJaypewpew2 жыл бұрын
So 2 years down the track is it still holding up? Literally the only reason I’ve not gotten one is I read somewhere their steel is Chinese, can’t deny the price tho
@humbertron10002 жыл бұрын
Still in perfect condition mate. only thing I've changed is the rear section from side to down facing due to fitting longer shackles. I may do a short video soon looking over it as a few seem interested to know. Thanks for watching :)
@SketchyAussie2 жыл бұрын
Do you remember where you got this brace kit? I've been trying to find it online but unable. Also have the Ascent and want to retrofit some racks to it.
@humbertron10002 жыл бұрын
Hey mate. It's an Arb product. I'll try and find the invoice and give you the part numbers 👍🏻
@SketchyAussie2 жыл бұрын
@@humbertron1000 that would be great. I trawled ARB site as well and couldn't find anything. From what I gather they only sell them with the canopies now not separately (which doesn't make sense to me) - I'll give my local mob a call tomorrow to get an answer for sure.
@SketchyAussie2 жыл бұрын
@@humbertron1000 went in to ARB and they had me sorted, knew exactly what I was after. Part number in my case was 17938010. Glad you uploaded this anyway as they quoted 5+ weeks for install, so I'll be DIY and following what you have done. Thanks mate :)
@seanpearson81732 жыл бұрын
Didn’t sound good to be honest! Stock is better
@donakio2 жыл бұрын
Wow!! Great work!!
@stephend26622 жыл бұрын
Thanks for the Video! I am keen to mount a 45kg roof top tent on top of the canopy. Can anyone advise if these reinforcement bars would be deemed Ok for that? 2014 Isuzu DMAX spacecab. Would really appreciate replies!
@johnbuckley2062 жыл бұрын
Great video mate, helped so much with my install, referred to it heaps. Delivered in a clear and concise manner. Cheers.
@lx77442 жыл бұрын
hope that slab is not a waffle pod :P
@Scott-YouTubeAddict2 жыл бұрын
I happen to like the factory “suction sound” when backing off the accelerator. Did the new exhaust affect this - hard to tell from the video but it sounds diminished.
@humbertron10002 жыл бұрын
Yes mate, unfortunately the howl between gear changes have gone.
@Scott-YouTubeAddict2 жыл бұрын
I have actually installed the same exhaust now on my none dpf 2014 BT50 and unfortunately is also gone. I was hoping the Mazda ECU and any other slight differences may have saved it even just a little bit. If I wasn’t getting an intercooler and ECU remap I wouldn’t do it again.
@lukereynolds99072 жыл бұрын
Sounds like shit get a v8 cruiser ya looser
@humbertron10002 жыл бұрын
Will do mate, will kiss dad on the lips and get him to grab me one. Cheers for the advice
@benallan25552 жыл бұрын
Looks good! Just bought a 2014 px with the same canopy. Definitely doing this mod. Thanks for the video
@SinclairFamilyAdventures2 жыл бұрын
After 12 months on the ute how is the exhaust going? Looking at this or the Torqit.
@Swanstar6652 жыл бұрын
Not bad for a first effort Dan :-D
@judthesizzler19752 жыл бұрын
Hey man great video, just subbed. I’ve got the same bracing. Just wondering how much does that increase your canopy roof weight rating? Let me know cheers.
@BM27793 жыл бұрын
Cheers for the video! How did you go about siliconing the holes? I haven’t used the same roof rack feet as you, but can’t find a way to make them more watertight without covering the whole bolt and nut in silicone.
@marcusbarnes59293 жыл бұрын
How much for the exhaust?
@lukethomas46462 жыл бұрын
$699 or something like that not including postage
@wicczeez80813 жыл бұрын
Is that still the stock engine?
@chrisfinglas96853 жыл бұрын
whats the noise from 2nd to 3rd.
@crab445Hornet3 жыл бұрын
Hi mate thanks for the video was thinking about getting one of these canopies and ARB Rhino rack for it do you think it would handle a little 10 foot aluminium boat on top with a another bar on roof of vehicle thanks mate cheers
@petersolomon8263 жыл бұрын
Mate a great insightful video. Gave me the confidence to have a go
@jadefraser85173 жыл бұрын
Thanks for the video mate. Installing one the same myself. Just with the gaskets mate did u use the original gasket on the turbo. And gaskets that come with the kit did u just use gasket cement between each join . Does it dry fast before tightening everything down after install
@kylra063 жыл бұрын
Mate, outstanding video. Well presented, clear and concise instructions.
@dilix953 жыл бұрын
When i put mine in, it sounds like shit on idle, they sound terrible
@humbertron10003 жыл бұрын
Dunno mate, mine sounds slightly deeper at idle unless it’s cold, then it sounds like a vacuum cleaner
@rosesolon92433 жыл бұрын
Is yours manual ? Is that a DPF or is that the Cat converter on your dump pipe from turbo?
@ericcremers24803 жыл бұрын
Hi mate, exactly what I’m after for my ascent canopy...where did you get the bracing kit from.i can’t find it anywhere. Like you I prefer to do my own installs . That’ll be much appreciated
@ra72383 жыл бұрын
Sounds weak
@humbertron10003 жыл бұрын
Cheers mate 👌🏻
@ra72383 жыл бұрын
@@humbertron1000 a straight all the way through no moderators no cat no dpf would sound much better man
@Saphire04373 жыл бұрын
@@ra7238 also makes it super duper illegal
@PlayaTmusic3 жыл бұрын
Good video mate thanks for the assistance
@sensnowtional3 жыл бұрын
Just wondering if you think it needs a tune to run well or if it’s going good with just the exhaust? Sounds great btw
@TheNyanCatReborn3 жыл бұрын
It'll run fine with the exhaust, but run a lot better with a tune as well
@riamriam67582 жыл бұрын
Looking for an excuse to get a tune I see.
@goersorg3 жыл бұрын
Just bought one for my 2012 Ranger px 2.2lit. Should be great after I fit it.
@erazon07172 жыл бұрын
How did you go? I have the same 2.2l 2015. Cheers bud!
@zach_xr6t5772 жыл бұрын
Hey mate, I too have a 2.2L, any updates?
@joe_allen77422 жыл бұрын
Just bought my 2013 px ranger 3.2l inline 5
@DampyYo3 жыл бұрын
Drill the cat out bro, waaaayy better sound 👌🏾
@idiotonbike2 жыл бұрын
At enormous environmental costs - no thankyou
@dickbeerking11192 жыл бұрын
How much did you drill the cat out by? Like several 10mm holes or drilled out completely?
@brocksinclair662 жыл бұрын
@@idiotonbike diesels good for the environment. plants love it
@kobyharrop2341 Жыл бұрын
you you mean drill straight thru the dpf?
@cjackett57913 жыл бұрын
Awesome tips mate. If you stuck a solar panel on those bars would you go through the roof with wiring to a second battery or the front of the arb canopy? Keen to know your thoughts as you look like you know what you’re doing and I have an almost identical set-up on my ranger👍 Thanks and keep up the great work.
@humbertron10003 жыл бұрын
Hi mate, so sorry for the slow reply. I really should get back on top of things and post more regularly. It's such a hard decisions isn't it. If it were to be a permanent fixture I would probably get a high quality bulkhead fitting which will Be waterproof and go through the top but that's only because I like things to be as clean as possible. Other option would be your suggestion of running down between the front of the canopy and up into the tub through one of the many access holes in the tub, but obviously not as clean.
@cjackett57913 жыл бұрын
Not Even 4x4 Thanks mate, all good and appreciate your advice 👍
Пікірлер
Great. I’m looking at doing this, thanks. Do you have a link for the exhaust
What about dpf filter and the computer ecu and how did you deal with that
Thanks for the great video, I’m about to do exactly what you did, got the bits, ready to go, very informative and clear on what I need to do, thanks again, cheers
Fundamental question: how do you know that the tub of vehicle is strong enough to carry canopy plus roof top tent e.g. possibly 300 kg (and additionally people sleeping in the tent in the stationary position) ?
Hey mate , where did you get the internal support system for the canopy ? I'm trying to do the same but can't find tge internal support system
Purchased through an arb dealer mate, they should be able to sort you out
looks like a fun time. I still got to what for a reasonably priced downpipe for my 2.3l turbo gas Ranger here in the US. We don't get the cool diesel models in North America. We still have our gun so I can't get to upset.
Hi mate, Loved the video. One question though, is the brace kit from ARB or from elsewhere . Cheers
Thankyou mate. Yes, the brace kit is from arb
Handy tip, in my opinion. Use a step down drill bit. (Cone shaped drill bit.) That way you cutting from the inside diameter face of the hole outwards, instead of down through the paint. If you must use a hole saw bit or spade bit, definitely tape them over first. And for good measure, finish off with a light touch with a chamfer bit, just to take the edge off a touch so it doesn't catch on threads and whatnot.
Hey mate I'm wanting to make my 2021 Ford Everest Trend sound louder and I like what you've done,is it possible to do with mine
Excellent video, thanks so much. Wasn't sure what was involved with the ARB strengthening kit and this vid was perfect.
Hey mate does tgis car have dpf with the exhaust or did u get a dpf delete
Just got the Ascent canopy fitted to the Ranger (2020 model). Wish you showed the brackets being fitted to the window frames inside. Looks good, though. I just want one rack for the rear and one over the roof of the cabin. Mainly to strap down long lengths of poly pipe and the like.
Great video mate 👍
Hi mate. Great video. Did you install the canopy yourself also? I’m sure it can’t be to hard but just need a bit of confidence to have a go
thanks king!
Exactly what I was looking for!
Where did you buy it from and price
Great video. How much weight can the bars and canopy hold? Enough for a roof top tent?
Sorry for the late reply, from Memory, the bars are only good for around 20kg each (off the top of my head) however, we have had our rooftop tent and awning hanging off ours for a few year and always slept 2 adults and a child. No issues so far but I'll leave that big dicision upto you :)
how much weight can it hold?
Sorry for the late reply, from Memory, the bars are only good for around 20kg each (off the top of my head) however, we have had our rooftop tent and awning hanging off ours for a few year and always slept 2 adults and a child. No issues so far but I'll leave that big dicision upto you :)
Your disrespect for black friday is noted many people lost there lives its the reason we have a cfa.
Of course Australia's Black Friday was a terrible incident and my heart goes out to everyone involved. However, Black Friday sales have nothing whatsoever to do with them. Sorry to offend you good sir
@@humbertron1000 if you dont honour your heritage what do you honour. This isnt a yankee problem this is our community not recognising and not remembering a tragedy which shaped the world l grew up in. My father was in a mountain ash forest when it swept through only a wind change saved him. Nothing like two hundred foot giants going off like penny bangers.
So 2 years down the track is it still holding up? Literally the only reason I’ve not gotten one is I read somewhere their steel is Chinese, can’t deny the price tho
Still in perfect condition mate. only thing I've changed is the rear section from side to down facing due to fitting longer shackles. I may do a short video soon looking over it as a few seem interested to know. Thanks for watching :)
Do you remember where you got this brace kit? I've been trying to find it online but unable. Also have the Ascent and want to retrofit some racks to it.
Hey mate. It's an Arb product. I'll try and find the invoice and give you the part numbers 👍🏻
@@humbertron1000 that would be great. I trawled ARB site as well and couldn't find anything. From what I gather they only sell them with the canopies now not separately (which doesn't make sense to me) - I'll give my local mob a call tomorrow to get an answer for sure.
@@humbertron1000 went in to ARB and they had me sorted, knew exactly what I was after. Part number in my case was 17938010. Glad you uploaded this anyway as they quoted 5+ weeks for install, so I'll be DIY and following what you have done. Thanks mate :)
Didn’t sound good to be honest! Stock is better
Wow!! Great work!!
Thanks for the Video! I am keen to mount a 45kg roof top tent on top of the canopy. Can anyone advise if these reinforcement bars would be deemed Ok for that? 2014 Isuzu DMAX spacecab. Would really appreciate replies!
Great video mate, helped so much with my install, referred to it heaps. Delivered in a clear and concise manner. Cheers.
hope that slab is not a waffle pod :P
I happen to like the factory “suction sound” when backing off the accelerator. Did the new exhaust affect this - hard to tell from the video but it sounds diminished.
Yes mate, unfortunately the howl between gear changes have gone.
I have actually installed the same exhaust now on my none dpf 2014 BT50 and unfortunately is also gone. I was hoping the Mazda ECU and any other slight differences may have saved it even just a little bit. If I wasn’t getting an intercooler and ECU remap I wouldn’t do it again.
Sounds like shit get a v8 cruiser ya looser
Will do mate, will kiss dad on the lips and get him to grab me one. Cheers for the advice
Looks good! Just bought a 2014 px with the same canopy. Definitely doing this mod. Thanks for the video
After 12 months on the ute how is the exhaust going? Looking at this or the Torqit.
Not bad for a first effort Dan :-D
Hey man great video, just subbed. I’ve got the same bracing. Just wondering how much does that increase your canopy roof weight rating? Let me know cheers.
Cheers for the video! How did you go about siliconing the holes? I haven’t used the same roof rack feet as you, but can’t find a way to make them more watertight without covering the whole bolt and nut in silicone.
How much for the exhaust?
$699 or something like that not including postage
Is that still the stock engine?
whats the noise from 2nd to 3rd.
Hi mate thanks for the video was thinking about getting one of these canopies and ARB Rhino rack for it do you think it would handle a little 10 foot aluminium boat on top with a another bar on roof of vehicle thanks mate cheers
Mate a great insightful video. Gave me the confidence to have a go
Thanks for the video mate. Installing one the same myself. Just with the gaskets mate did u use the original gasket on the turbo. And gaskets that come with the kit did u just use gasket cement between each join . Does it dry fast before tightening everything down after install
Mate, outstanding video. Well presented, clear and concise instructions.
When i put mine in, it sounds like shit on idle, they sound terrible
Dunno mate, mine sounds slightly deeper at idle unless it’s cold, then it sounds like a vacuum cleaner
Is yours manual ? Is that a DPF or is that the Cat converter on your dump pipe from turbo?
Hi mate, exactly what I’m after for my ascent canopy...where did you get the bracing kit from.i can’t find it anywhere. Like you I prefer to do my own installs . That’ll be much appreciated
Sounds weak
Cheers mate 👌🏻
@@humbertron1000 a straight all the way through no moderators no cat no dpf would sound much better man
@@ra7238 also makes it super duper illegal
Good video mate thanks for the assistance
Just wondering if you think it needs a tune to run well or if it’s going good with just the exhaust? Sounds great btw
It'll run fine with the exhaust, but run a lot better with a tune as well
Looking for an excuse to get a tune I see.
Just bought one for my 2012 Ranger px 2.2lit. Should be great after I fit it.
How did you go? I have the same 2.2l 2015. Cheers bud!
Hey mate, I too have a 2.2L, any updates?
Just bought my 2013 px ranger 3.2l inline 5
Drill the cat out bro, waaaayy better sound 👌🏾
At enormous environmental costs - no thankyou
How much did you drill the cat out by? Like several 10mm holes or drilled out completely?
@@idiotonbike diesels good for the environment. plants love it
you you mean drill straight thru the dpf?
Awesome tips mate. If you stuck a solar panel on those bars would you go through the roof with wiring to a second battery or the front of the arb canopy? Keen to know your thoughts as you look like you know what you’re doing and I have an almost identical set-up on my ranger👍 Thanks and keep up the great work.
Hi mate, so sorry for the slow reply. I really should get back on top of things and post more regularly. It's such a hard decisions isn't it. If it were to be a permanent fixture I would probably get a high quality bulkhead fitting which will Be waterproof and go through the top but that's only because I like things to be as clean as possible. Other option would be your suggestion of running down between the front of the canopy and up into the tub through one of the many access holes in the tub, but obviously not as clean.
Not Even 4x4 Thanks mate, all good and appreciate your advice 👍