Пікірлер

• 
  @carolynray5318 күн бұрын

  What is a t-nut for? I need to put legs on a buffet, first time I've done it!!😮

• 
  @s.l.wilson1921Ай бұрын

  Another way to get a grip on the bolt is to use the jam nut method (2 nuts screwed onto the bolt so that one can be gripped and turned to get leverage and turn the part that’s in the wood. A friend told me about this%

• 
  @John_D2Ай бұрын

  awesome thank you !

• 
  @PhilMace3 ай бұрын

  Can I suggest a hack? I have an Ikea bed where the treads went on. I used the threadbare top of the bolt to bring the bolt out 6mm and then put it back in the bed. It worked like a dream until I could find the proper hanger bolt for Ikea use. I would never have thought of doing that without this video. Thank you.

• 
  @montrealmark19944 ай бұрын

  Very helpful, thanks!

• 
  @atte3045 ай бұрын

  ridiculously long complicated way to do this

• 
  @Richard-kz2om7 ай бұрын

  Thanks! I looked everywhere for someone to show how to do this!!

• 
  @benreece13658 ай бұрын

  I like you’re style! 👊🏻

• 
  @lopsided8904 Жыл бұрын

  Hello, I want to use single piping and ply grip along the inside back carved frame of a fluted antique tub chair. Will that work, or can you only use it on outside backs and sides?

• 
  @bigviper64 Жыл бұрын

  I just learned that its best to use 2 Hex Nuts, screw them on to just past the top of the bolt. Tighten them, and then use the inside nut to remove the Hanger Bold by turning counter clockwise. To put the bolt into the wood, use the outer most nut and screw it in normally.

• 
  @hecticserrano Жыл бұрын

  Great video, excellent instructions!

• 
  @For_What Жыл бұрын

  Damn i wanted to see you strip it

• 
  @Manicmood89 Жыл бұрын

  Why burlap? Can anything else be substituted? (i.e muslim?)

• 
  @joannabrotherson1024 Жыл бұрын

  Thank so much for these videos!!! Love how you show step by step how to do this. This was perfect!

• 
  @thines3560 Жыл бұрын

  Thank you for this step by step tutorial series. It has helped me complete my first DIY upholstery chair project. 💫💫💫💫💫

• 
  @helenwood3199 Жыл бұрын

  Replace the button in level line with the other buttons.

• 
  @gathakapse9568 Жыл бұрын

  Can i get such jooks

• 
  @gathakapse9568 Жыл бұрын

  Hooks

• 
  @andrewarthurmatthews6685 Жыл бұрын

  Camera too far to actually see what you are doing so not good watching!

• 
  @blumenaue7590 Жыл бұрын

  OMG Thanks a million.

• 
  @dipikadoshi8086 Жыл бұрын

  what is legs doesn't go fully in at the bottom of wood cabinet? Is it ok?

• 
  @tinabenavidez1903 Жыл бұрын

  Thank you for your help.

• 
  @VitalityMassage Жыл бұрын

  That was epic.

• 
  @marcomedrano3768 Жыл бұрын

  THANK YOU!

• 
  @alanjohnson8077 Жыл бұрын

  We call that Clamp a G Clamp in the UK

• 
  @b516uck Жыл бұрын

  Super helpful!

• 
  @sparkyheberling6115 Жыл бұрын

  How can remove the safety switch? Can the process be reversed if I decide to resell the stapler?

• 
  @charliehilliard3071 Жыл бұрын

  I never knew they were called that. Mine is bent and we didn’t have a clue how to fix it. We had no idea that we only needed a vice grips and wind it out. THANK YOU

• 
  @charliehilliard3071 Жыл бұрын

  AWESOME VIDEO. NEEDED THAT INFO BADLY. thank you

• 
  @latashasingleton47892 жыл бұрын

  Thanks a lott!! Doing an at home wing back and ordered a 3plus model from Amazon. What is the model of this gun?

• 
  @matrix26uk2 жыл бұрын

  I just spent 2 hours pulling one manually to fit. Only sliced my hand once

• 
  @helenamchugh93082 жыл бұрын

  Thanks for all the videos, just would've liked them filmed closer .

• 
  @sirrichardrichard56552 жыл бұрын

  You know the value of a short video...watch your fingers though..

• 
  @marywallace41242 жыл бұрын

  Stupid

• 
  @mollynakamori2 жыл бұрын

  Thank you so very much - 8 years later and this video continues to help!

• 
  @tyronewoodard58002 жыл бұрын

  Do you know if you have a project and you just need to put a few staples in to something that came loose don’t go by no pneumatic staple gun then you gotta have a compressor just get a electric staple gun put a few staples in it and be done with it

• 
  @tyronewoodard58002 жыл бұрын

  Don’t you believe him the battery powered will work just as good try the Ryobi

• 
  @rosecocchiarella20092 жыл бұрын

  Thank you so much!

• 
  @kayefoster69772 жыл бұрын

  J iv

• 
  @gordon54352 жыл бұрын

  Love the way you talk us through in everyday language. It's like you're talking to me personally. Like I'm right there. Thnx...

• 
  @johnwagner8462 жыл бұрын

  Is there any gun you know of to put in decorative caps?

• 
  @purenation68312 жыл бұрын

  *...As a long time designer and public space specifier, the affordability **MyseIf.Furniture** and look is exceptional... spray them with fabric protector immediately for a somewhat longer use, you will not regret. smile*

• 
  @christinaowens7962 жыл бұрын

  *...As a long time designer and public space specifier, the affordability **MyseIf.Furniture** and look is exceptional... spray them with fabric protector immediately for a somewhat longer use, you will not regret. smile*

• 
  @steveplenzler37722 жыл бұрын

  Love this but question: 7/8 staples for the whole project or for only temporary tacking?

• 
  @marionsgray2 жыл бұрын

  Thanks for sharing

• 
  @georgetech3802 жыл бұрын

  Can you tell me what size Staples to use with a air staple gun on a new motorbike seat cover Thanks

• 
  @discgolflife2 жыл бұрын

  Can you add xtra cross wire for more support?

• 
  @RicardoGarcia-kv8it2 жыл бұрын

  Thanks awesome I am 59 furniture refinisher can I learn this also?

• 
  @jfrench7072 жыл бұрын

  I was so stuck on my chair. Thank you! My first time really upholstering a chair the correct way.

• 
  @pamholmes11742 жыл бұрын

  A really good video, short and to the point,Thanks!

• 
  @robinkline92532 жыл бұрын

  Thank you SO MUCH! I just purchased 8 legs which appeared to have short hanger bolts. All that was necessary was your unscrewing procedure and they now reach the metal hardware on the other side of the wood plank :)