Пікірлер

• 
  @Aaron-hype3 күн бұрын

  Ok there's your expanders. Where's the rings?

• 
  @carolinahydraulichose62533 күн бұрын

  Those particular piston seals were U-seals facing opposite each other, so that's all there wa to it :)

• 
  @stevecovington98179 күн бұрын

  I can guarantee you they don't always come out by turn the gland nut for go back by turning the gland nut , I just did my sixth one today and they have all been a pain. Pull them out carefully Lee with visegrips and use visegrips and a good hammer to put them back in with lub and patience

• 
  @carolinahydraulichose62533 күн бұрын

  you're not wrong, but who wants to watch a two hour video of us struggling? lol

• 
  @rickpaine38622 күн бұрын

  Just rebuilt 2 of these cylinders and the wire wouldn't move but I had enough to clamp on some vise grips and tap them out with a small hammer

• 
  @freespirit2455Ай бұрын

  Do you have the part number for the seal kit? I have the same machine/cylinder as in this video (and have learned that they aren't all the same for LB75Bs). Also, in other videos they talked about changing the seals on the piston head, but you say in this video that they aren't replaceable? If I can't find a kit I'll have to look for random seals that fit, and I want to be sure if I should try to take the piston head seals off or not....Thanks!

• 
  @carolinahydraulichose6253Ай бұрын

  Hey! If you can measure the rod and piston, I can give you better info on the seals. I believe this one was 40 x 80- is that what yours is? As far as the piston seals- I’m not sure what I said in the video, but it’s the black pieces you can’t replace. You can remove and replace the yellow piston seal in the middle- it’s a two piece piston seal….. let me know if your rod is 40 MM and your piston 80 MM and I should be able to help you out

• 
  @timtrial39712 ай бұрын

  Good video. I love using my thread gauge. It's a way to impress your friends

• 
  @kursahdfa75282 ай бұрын

  God is coming back soon pls all repent of your sins

• 
  @bsrob12 ай бұрын

  Do you make custom lines and mail them? I’d love to have one made to skip the adapters

• 
  @carolinahydraulichose62532 ай бұрын

  Kinda- there are a lot of it of questions I need to ask to make sure you’re getting the correct threads and everything…..

• 
  @bsrob12 ай бұрын

  @@carolinahydraulichose6253 that’s awesome. Can I search y’all on the web or do u have a phone number?

• 
  @942doc13 ай бұрын

  phenomenal video. very informative. good to know that kubotas use bsp

• 
  @carolinahydraulichose62533 ай бұрын

  Thank you for watching!!

• 
  @RPMMania823 ай бұрын

  What do you do if the lockwire breaks inside while spinning it out.

• 
  @carolinahydraulichose62533 ай бұрын

  Get something skinny to try and jam under the piece left in it. Then turn it so the wire (hopefully) turns up and out of the groove

• 
  @RPMMania823 ай бұрын

  @@carolinahydraulichose6253 I'll try. Thanks. It broke before it ever started to move.

• 
  @kuleshwartandan40674 ай бұрын

  Piston seal me u rod seal bhi chadha sakte hai kya

• 
  @carolinahydraulichose62534 ай бұрын

  This piston took U Seals, but you’re right that type of seal usually goes in a gland

• 
  @robbie79nz84 ай бұрын

  Is it only with swivel type fittings that you can seal through the cone faces? Is there such a thing as a port connection that seals with the cone faces?

• 
  @carolinahydraulichose62534 ай бұрын

  If the port has the swivel on it with the cone, yes, but otherwise it seals with the bonded seal.

• 
  @guiltspeedsupra20365 ай бұрын

  Hi few days ago I replaced my hydraulic pump. upon turning on hydraulic tank I notice oil flowing out the quick connector while it was unattached to dump trailer. Is this normal ? I’m also having some Cavitation as my pump is winding both on idle and throttle up.

• 
  @carolinahydraulichose62535 ай бұрын

  Oil coming out of the quick coupling when it is not connected is not normal- how much came out? Make sure your tank still has enough oil in it to feed your pump.

• 
  @guiltspeedsupra20365 ай бұрын

  @@carolinahydraulichose6253 not a lot but I added 15 gallon since no leaks anywhere and still got this problem

• 
  @dakotak84375 ай бұрын

  Looks still good to me

• 
  @carolinahydraulichose62535 ай бұрын

  lol right?! Couple more years at least 😂😂

• 
  @dakotak84375 ай бұрын

  @@carolinahydraulichose6253 or at least the new owner lol

• 
  @jeremyjohnson97786 ай бұрын

  hey hi at 00:05-07 that is NOT an FJ (Female JIC). The threads are far too close and the cone is steeper than a 37º angle. It's more likely an FK (Komatsu)

• 
  @carolinahydraulichose62536 ай бұрын

  Lol I promise it’s a JIC- it was a #32 though, so maybe that’s why it looked so steep in the video ☺️ There is an “FK” in there at 45 ish seconds- the 30 degree flare. Thank you for watching!!!

• 
  @philliphall51987 ай бұрын

  Thank You 🙏 😊😊😊 Easy job

• 
  @philliphall51987 ай бұрын

  I’ve even heated them to free up the wire and let them soak in diesel several days before I could finally get it out Hate these types the most

• 
  @carolinahydraulichose62537 ай бұрын

  It is a pretty terrible design! Letting them soak is always a good idea!!

• 
  @emmanicole76957 ай бұрын

  How does the groove become damaged?

• 
  @carolinahydraulichose62537 ай бұрын

  Great question! This was off of a brand new machine, so I think the person who installed the hose over tightened it and squished the groove

• 
  @jacubcalhoun71927 ай бұрын

  Y'all made it look easy I used a chain and connected it to the 2 bolts and washers and used the power of the ram to remove it..mine was being a puto!!

• 
  @carolinahydraulichose62537 ай бұрын

  Lmao where there’s a will there’s a way!!

• 
  @jacubcalhoun71927 ай бұрын

  @@carolinahydraulichose6253 yep tht and my old ass uncle HAD TOO help!🤦

• 
  @robertromberger47087 ай бұрын

  Problems getting good engagement with a "phillips" head screw on your Nissan? Go buy a proper JIS screwdriver.

• 
  @carolinahydraulichose62537 ай бұрын

  Yes! Just had some guy telling me about those the other day!! He said a Phillips will strip it out the JIS Ones. So annoying!

• 
  @emmanicole76957 ай бұрын

  THEY HAVE TWO THREADS 🤯

• 
  @carolinahydraulichose62537 ай бұрын

  It’s SO crazy 🫠

• 
  @user-zx8vc5ro5m8 ай бұрын

  No video

• 
  @partsisparts95688 ай бұрын

  Thanks for Posting. I have to rebuild the cylinders on my Weaver AFH-70-A and had no idea how the wire was removed. It's a silly design.....

• 
  @carolinahydraulichose62538 ай бұрын

  It’s a terrible design! When you put the wire back in, pack the groove with some silicone to stop water from going in and rust from building up 😀

• 
  @partsisparts95688 ай бұрын

  Good idea

• 
  @emmanicole76958 ай бұрын

  what’s a quad ring?

• 
  @carolinahydraulichose62538 ай бұрын

  So glad you asked!! It’s a rubber ring that is square instead of round, like an o ring is

• 
  @user-lh8rj5bw2s8 ай бұрын

  No

• 
  @carolinahydraulichose62538 ай бұрын

  Yes

• 
  @pablofierro49818 ай бұрын

  Donde se pueden comprar

• 
  @carolinahydraulichose62538 ай бұрын

  Hopefully you have a local hydraulic shop that can sell them to you- and if not maybe Amazon?

• 
  @pablofierro49818 ай бұрын

  @@carolinahydraulichose6253 gracias

• 
  @jorgenri478 ай бұрын

  Hola buen dia

• 
  @litoRX78 ай бұрын

  They’ll fit, if you use the right tool! 🔨 😂

• 
  @carolinahydraulichose62538 ай бұрын

  😂😂😂

• 
  @abduljabar48468 ай бұрын

  Can bspp fitting with bspt??

• 
  @carolinahydraulichose62538 ай бұрын

  No, unfortunately

• 
  @abduljabar48468 ай бұрын

  @@carolinahydraulichose6253 tq fr yr answer

• 
  @herbertjuliette7628 ай бұрын

  🙂 Promo-SM

• 
  @chrisandmonicazantingh9909 ай бұрын

  I’ve got a Massey cylinder with the same ring set up. Got it off but can’t get back on matter what I try. Might leave it off

• 
  @carolinahydraulichose62539 ай бұрын

  Let me know if it works! I’ve always wondered…..

• 
  @chrisandmonicazantingh9908 ай бұрын

  It’s working with the in cab controls. If you use the the fender controls it lifts too high and leaks. Be better if it was on.

• 
  @carolinahydraulichose62538 ай бұрын

  @@chrisandmonicazantingh990 thanks for letting me know!!

• 
  @Schmoker9 ай бұрын

  Crazzy

• 
  @thenomad71209 ай бұрын

  You can remove the damaged areas carefully with a file don’t hit that nose cone angle at all and there will be enough good threads left for it to function

• 
  @carolinahydraulichose62539 ай бұрын

  I had a new one in stock so I sold it to him 🙃😉

• 
  @kennethheern48969 ай бұрын

  Thanks for the video. It was a great help.

• 
  @carolinahydraulichose62539 ай бұрын

  Glad to hear it!

• 
  @user-mn4lr8ix6g9 ай бұрын

  Love this song 💓🎸🎸🎸

• 
  @myadhdSquirel9 ай бұрын

  WTF lmao, fukin fittings are $20 at your local Napa.

• 
  @carolinahydraulichose62539 ай бұрын

  Right?! Those fittings were SUPER old, though, so it lasted 🤷🏻‍♀️

• 
  @Schmoker9 ай бұрын

  Wow

• 
  @user-lh8rj5bw2s10 ай бұрын

  Wow

• 
  @Schmoker10 ай бұрын

  Crazzy ngl

• 
  @1waukesha10 ай бұрын

  No the saying Cross threaded is better than loctite! Lmao.

• 
  @carolinahydraulichose625310 ай бұрын

  Lmao that’s one I’ve never heard, but will be using often 🤣🤣🤣

• 
  @GarcBomber11 ай бұрын

  What's the difference between "RP" and "RS" metric parallel threads?

• 
  @carolinahydraulichose625311 ай бұрын

  I’ve heard of DIN L and DIN S is that what you’re talking about?

• 
  @GarcBomber11 ай бұрын

  @@carolinahydraulichose6253 had a supplier ask me and was trying to understand. RP is metal to metal seal, RS utilizes a washer to seal.

• 
  @derekstockman662711 ай бұрын

  Which way does the bevel go on the seal?

• 
  @carolinahydraulichose625311 ай бұрын

  Down- you want the oil to hit the lip first

• 
  @OkieRob11 ай бұрын

  You don't need to pull with pliers. Just turn the gland and the ring will come out without breaking.

• 
  @carolinahydraulichose625311 ай бұрын

  Not this one 😆 It was Frozen in there and needed some extra help 🤷🏻‍♀️

• 
  @philliphall51987 ай бұрын

  Rusty wire is hell to get out some time

• 
  @paultheisen529011 ай бұрын

  Great video, appreciate the help, that was perfect

• 
  @carolinahydraulichose625311 ай бұрын

  Glad to hear it!!

• 
  @mrfloor1845 Жыл бұрын

  I’ve actually never found one that’s clogged

• 
  @carolinahydraulichose6253 Жыл бұрын

  You’re lucky!!

• 
  @mclovinton Жыл бұрын

  That bloody thumb nail😂😂😂

• 
  @carolinahydraulichose6253 Жыл бұрын

  Don’t hate!! 🤪

• 
  @buddygreendale318 Жыл бұрын

  And that's for when you can't assume anything. ask what part is

• 
  @carolinahydraulichose6253 Жыл бұрын

  It’s a grease fitting for - in this case- the pin on a hydraulic cylinder 😆

• 
  @buddygreendale318 Жыл бұрын

  @@carolinahydraulichose6253 yes I know talking about other people.work on cars for years

• 
  @robertmcneely9889 Жыл бұрын

  Hey, complete instructional video by New Age Industry INC. The rest of the story

• 
  @carolinahydraulichose6253 Жыл бұрын

  Thanks- I get it now 🤦🏻‍♀️ I didn’t understand the question 😊 Good luck!

• 
  @robertmcneely9889 Жыл бұрын

  Hey, great job on female attachment instructions. I didn't know to heat hose to ease installation. So thank you. My kit has a nipple or male attachment that goes on the water pump or another hose to be able to use the quick connect kit. Now i have to screw intake and discharge hoses on each time i set up my portable water pump. With seventy year old hands it's now difficult and time consuming. So a complete video would be great. Thanks for responding.

• 
  @robertmcneely9889 Жыл бұрын

  What about the other halt?

• 
  @robertmcneely9889 Жыл бұрын

  The other half?

• 
  @carolinahydraulichose6253 Жыл бұрын

  Do you mean the other end of the hose?

• 
  @rtownsend744brad Жыл бұрын

  I don't know why he started chiseling the snap ring while it was still cherry red. It's going to lay back down...