Пікірлер

• 
  @roadstar4992 күн бұрын

  So do these stock servos perform well..or maybe a better upgrade servo makes sense.

• 
  @LyhneRC2 күн бұрын

  The stock servo are actually good, you might be able to find a better one but the radio are the weakest link and should be upgrades before servo. I use the stock servo in all my micro WLToys

• 
  @roadstar4992 күн бұрын

  I have had that flysky radio for 14 years and its great...range on mine is very far..ran boats,cars very far away...i also converted mine to use lipo 3s packs...Great demo i actually never compared radios and did not realize this dead zone issue..i always blamed the linkage and servos..thanks for sharing😊

• 
  @LyhneRC2 күн бұрын

  I’m glad to help 😊, thanks for the kind words 👍. Strange that your radio has a good range, the range is the only drawback for me on this radio. I also use the radio on 1:10 off roads cars and here I often run out of range, here the range is like 30-50 meters. I have another radio labeled “HRC” which should be the same (and looks identical) but that one has 300m range - strange

• 
  @eddierivera89103 күн бұрын

  The FG Marder is Awesome 😎 keep the videos coming 🏎️ 💨

• 
  @LyhneRC3 күн бұрын

  Thanks buddy, it sure is. Love the sound of the Marder 👍

• 
  @roadstar4994 күн бұрын

  Pretty amazing lap times...are you using stock radio? Also did you loosen diffs and grease them? Did that also improve track times? Thanks for sharing i have the green truck version on the way..😊

• 
  @LyhneRC4 күн бұрын

  Hi, I am using stock radio in this video, only modification is making the car turn sharper and loosen up diffs but not grease as described here: Upgrade drive train WLToys K989, K969 or 284131 | fix stiff, sticky differentials kzread.info/dash/bejne/qKtkwdOAnLO1hNY.html

• 
  @LyhneRC4 күн бұрын

  I this video I replace the radio, for K989 it’s a huge improvement: WLToys K989/K969/284131 radio upgrade FlySky FS-GT3B with EXP, Exponential. Improve steering. kzread.info/dash/bejne/kYB1x5mqk6ipm7w.html

• 
  @roadstar4994 күн бұрын

  Sounds Great! I will check out once i get car..thax😊

• 
  @LyhneRC4 күн бұрын

  @roadstar499 no problem 😊

• 
  @KrisLyhne-Xray12 күн бұрын

  ***********=** fin video❤

• 
  @LyhneRC12 күн бұрын

  Tak, men hvad sker der for de stjerner 😂

• 
  @Schmidteren20 күн бұрын

  mega fedt. :D ligger der andre kluber som denne her rundt omkring i danmark? :)

• 
  @LyhneRC18 күн бұрын

  Ja det gør der, og der er flere der er ved at blive etableret. Der sker rigtig meget med RC biler for tiden. Hvor bor du?

• 
  @jakekoninsky568124 күн бұрын

  Awesome, been thinking about doing something like this, did not think of using rope though, genius!

• 
  @LyhneRC24 күн бұрын

  It was just a quick idea that turned out working perfectly 👍

• 
  @SC4DR124 күн бұрын

  Interesting about the front locked diff in the k989. I'm going to give it a go on my basement track! Thanks for uploading!

• 
  @LyhneRC24 күн бұрын

  It works great with locked front diff, all the 1:10 scale cars has that, made this video about it: WLToys K989, 284131 will it be faster with a locked front differential? kzread.info/dash/bejne/e5V_m9SCntC6j9Y.html

• 
  @LyhneRC24 күн бұрын

  I made this video about locked front diff: WLToys K989, 284131 will it be faster with a locked front differential? kzread.info/dash/bejne/e5V_m9SCntC6j9Y.html

• 
  @SC4DR124 күн бұрын

  @@LyhneRC Thank you again! These 1/24-1/28 cars are so much fun. I’d like to see them become more popular in my area, even batting around the idea of building a multi track facility w/ hobby shop here in Hunt Valley MD. Years ago we had a carpet track and hobby shop, but sadly nothing in a long time😞

• 
  @LyhneRC23 күн бұрын

  @SC4DR1 There is nothing where we live either. So we simply made it ourselves , first we founded a club, then got an area that was just a weed field and now one year later we have this: Aarhus RC Bashers Åbnings Event - 2. Juni 2024 kzread.info/dash/bejne/oZ6jpZizpbvVZM4.html

• 
  @SC4DR123 күн бұрын

  @@LyhneRC That's awesome! I've made a few tracks over the years with friends in old dirt bike riding spots, but I'm in the position to do it legit now. The thing that scares me, is it's a disposable hobby.

• 
  @REPLAYRC28 күн бұрын

  Oh! That's a really awesome event. It's definitely more fun with a group than alone!🤩🤩

• 
  @LyhneRC28 күн бұрын

  Yes it is, we have lots of fun and many interesting cars 👍

• 
  @parsamirmohamadpour9865Ай бұрын

  The Porsche is very good i have it is so good and fun

• 
  @LyhneRCАй бұрын

  It’s a great little car 👍

• 
  @snorrevonflakeАй бұрын

  I would rather like to know how it can be made much slower and better controllable to run indoors. Not interested in speed in RC cars.

• 
  @LyhneRCАй бұрын

  Hi, in that case I would recommend upgrading the radio - it make a huge difference for K989. The radio for K989 is pretty bad (it's better for 284131 and 284010). I am using this radio on my K989 and it has several benefits: It has no dead spots, you can reduce speed and it has EXP, see more about that in this video: kzread.info/dash/bejne/kYB1x5mqk6ipm7w.html

• 
  @joneskimracing2932Ай бұрын

  The q4 yellow car is the Esteban Ocon of this track wreaking havoc on all others with complete disregard of the cars in front of him, just driving right through them….

• 
  @LyhneRCАй бұрын

  We know this guy, and didn’t do it on purpose he just had a bad day and was sorry about that. He’s actually a nice guy 😊

• 
  @joneskimracing2932Ай бұрын

  @@LyhneRC You are very naive or blind. In 1st main, he drives through the blue car and doesn’t wait. In the 2nd main, he drives through the red car twice and both times he doesn’t wait.

• 
  @LyhneRCАй бұрын

  @@joneskimracing2932I didn’t argue against what he did, he did make some bad moves and hit my son. I just told that he didn’t do it because he wanted to ram other cars. He is not a very experienced driver and made some bad moves that resulted in collisions. If I remember correctly then this was one of the first races he participated in - if it was an experienced driver it would be another case. But for a rookie, this can happen. The judge/marchall should have given him a penalty, but failed to do so - I find that a bigger problem

• 
  @Jeg-elsker-lyhne-rcАй бұрын

  Det er mig der kørte den store hvide bil idag. Tak for en hyggelig dag

• 
  @LyhneRCАй бұрын

  Selv tak, det var en rigtig gode dag 👍

• 
  @j.c.proctorАй бұрын

  Cool 🔥 👍🏽 💯 💪🏽

• 
  @LyhneRCАй бұрын

  Thanks 😊

• 
  @DRIVE-N-FLYАй бұрын

  Sygt fedt event👍

• 
  @LyhneRCАй бұрын

  Ja det var en fed dag 👍

• 
  @KrisLyhne-XrayАй бұрын

  Mega hyggelig dag❤

• 
  @LyhneRCАй бұрын

  Det var super hyggeligt 😀

• 
  @j.c.proctorАй бұрын

  Nice video great comparison i got plans on building a track like the first 1 you showed so im going to get my son and i a pair of the wltoys but in the future i want to build the 2nd track then we will get a pair of mini z

• 
  @LyhneRCАй бұрын

  Sounds like a good plan. The wltoys 284010 is the best one to get 👍 unless you want to drift

• 
  @ReclintedАй бұрын

  this is great ;)

• 
  @LyhneRCАй бұрын

  Thanks, have you seen I have made a more detailed video on how to make the carpet?

• 
  @dans2423Ай бұрын

  Very cool! Would be great if you could share how you fixed the camera to the chassis! I also like the body shell. Do you have a link for it?

• 
  @LyhneRCАй бұрын

  Hi, I will add image of the mounting in an upcoming video, so hang on for that 😊. I use two cameras: A forward looking GoPro on a standard GoPro mount which I have attached to the battery with tape. And a 360 camera mounted on a homemade bracket attached to the rear bulkhead. Which of the body shells do you want a link to, then I will try to see if I can find that?

• 
  @RCBASHINGFYNАй бұрын

  Super fedt! - lækkert at se at AARCB har fået så meget op og stå

• 
  @LyhneRCАй бұрын

  Tak, og der er meget mere. Der er to baner mere som blev klar kort efter denne video. Hæng på, de kommer snart.

• 
  @braelighty6212Ай бұрын

  How dare you ruin that Ferrari, it is easily worth $200🤕

• 
  @LyhneRCАй бұрын

  I am really sorry about that 😢, and it's my sons Ferrari. We raced the Mini-Z vs a 1:10 touring car on a 1:10 track - video about that soon...

• 
  @braelighty6212Ай бұрын

  @@LyhneRC it fine, that’s part of the hobby. Slightly painful to see though 😂

• 
  @LyhneRCАй бұрын

  @@braelighty6212 haha, yeah but a Ferrari…

• 
  @REPLAYRCАй бұрын

  It's been a long time, hasn't it? I thought you were no longer running your channel! Nice to see you again, buddy!

• 
  @LyhneRCАй бұрын

  Thanks, have been busy starting up a new RC club - takes a lot of time 😊

• 
  @monosnightmare1727Ай бұрын

  ı have a k989 and its amazing

• 
  @LyhneRCАй бұрын

  For the price it doesn’t get much better. The newer 284010 is slightly improved though

• 
  @LyhneRCАй бұрын

  For the price it doesn’t get much better. The newer 284010 is slightly improved though

• 
  @azkanand5832Ай бұрын

  Hello. I just bought 284131. The drivetrain feels so sticky when playing. It stops when i release throttle. I have watched your fix video. I checked my rear diff. It's not too tight actually. It can move. The pinion and spur gears can also move quite freely when i spin them with hand. Im not sure what caused it so sticky when playing. Anyway, you mentioned somewhere not to over tighten the screws of diff. Which screws you mean? i found 3 tiny screws, and 1 tiny screw in center (which i failed to unscrew).

• 
  @LyhneRCАй бұрын

  Hi, there is a lot of internal resistance in the motor so this car will always stop abruptly when releasing the throttle. If you are in doubt try disengaging the motor, then the car should run freely with almost no resistance. Regarding the screws in the diff, then I noticed that if I tightened too much then a freely moving diff would become tight again. Guess the plastic is so thin that you can bend it, so just keep an eye on that 👍

• 
  @craigm7240Ай бұрын

  The cheapo aluminum difs from ebay are a great upgrade to fix the issues you are describing. With a little time spent, the WL cars can become quite enjoyable to drive.

• 
  @NBC_NCOАй бұрын

  Very very good.

• 
  @LyhneRCАй бұрын

  Thanks 😊

• 
  @NBC_NCOАй бұрын

  Excellent.

• 
  @LyhneRCАй бұрын

  Makes them drive a lot more freely 👍

• 
  @Paul__FC2 ай бұрын

  Subbed! I have been considering getting one of these. This was just what I needed to see.

• 
  @LyhneRC2 ай бұрын

  Thanks, glad to help 👍

• 
  @NBC_NCO2 ай бұрын

  I own both types as well. I think there is some gear mesh issues in the Wltoys. The rolling resistance is terrible. The tires are not very good for actual racing either due to the hard compound. Its easy to work on and the price is good. Depending on where and when you get one..3 can be obtained for the price of a mini Z. The mini Z is really good out of the box. The 4 AAA batteries give it a mechanical traction advantage once its moving. The rear differential is excellent and its overall top speed is much better as well.

• 
  @LyhneRC2 ай бұрын

  Thanks for all the info, I can support that 👍. Regarding the rolling resistance the 284010 is better than K989 and 284131. Have you tried this trick: Upgrade drive train WLToys K989, K969 or 284131 | fix stiff, sticky differentials kzread.info/dash/bejne/qKtkwdOAnLO1hNY.html

• 
  @LyhneRCАй бұрын

  Regarding more traction you can get so much that the car starts to traction roll on carpet by using tire sauce. See more here: WLToys K989, 284131, Mini-Q will tire additive make them faster? kzread.info/dash/bejne/hGiIqbWuZ7HTcrQ.html

• 
  @NBC_NCOАй бұрын

  @LyhneRC excellent. I have not. I've been out of the hobby for a few months it seems. Adding insulation and extra storage in my garage and currently working on protecting my workshop against my dogs and also adding a layer of insulation. Greetings from Texas. That's some good information you have.

• 
  @harlyquin2 ай бұрын

  i dont know a lot about these cars but i do know the kyosho mini z is stupid expensive for what it is, also id much prefer the 4 wheel independent suspension and the lipos battery of the wl toys car, also you could probably get the wil toys handling a lot better with better tyres, yes the mini z looks a lot better with the scale bodys but if i had to get chose id get a wl toys with some mini z tyres and body

• 
  @genboxofficial74172 ай бұрын

  For racing I agree, but the AWD mini Z is worth every penny for drifting. I’ve owned a k969 and the experience of driving the mini z vs the k969 is incomparable

• 
  @LyhneRCАй бұрын

  I agree. The mini-z is a better car for sure, but the price is ridiculous for what you get. You can get a 1:10 car for that price. I own a Mini-Q which is a Mini-Z clone, but that is no way as good. I have bought two Mini-Z used, then the price is not that bad.

• 
  @genboxofficial7417Ай бұрын

  @@LyhneRC yeah honestly even the AWD is overpriced in my opinion but honestly there’s just nothing better you can get at this scale. I think $150 RTR with gyro and lights would be a fair price

• 
  @LyhneRCАй бұрын

  @genboxofficial7417 Correct, they are THE best 1:24 and they know it, that’s why they are some expensive. Could be great if some other company made one as good but more affordable. Then they would probably lower the price

• 
  @KrisLyhne-Xray2 ай бұрын

  Fed video godt sammenligning ❤

• 
  @LyhneRC2 ай бұрын

  Tak 😊

• 
  @MysticRiverRC2 ай бұрын

  Very nice comparison. I have the WLToys truck. Really like it a lot!

• 
  @LyhneRC2 ай бұрын

  Thanks, yes there are awesome little cars, a lot of car for the money 👍

• 
  @JN-qr4yt2 ай бұрын

  First

• 
  @LyhneRC2 ай бұрын

  Haha 🏆🏆

• 
  @myvideochannel72 ай бұрын

  Great comparison video! Is there a way to make the 284010 fiesta rally body fit onto the 284161 chassis? I think it would be great and just maybe need to cut the wheel wells on the body a bit bigger to clear the bigger wheels, but make a more capable rally car;)

• 
  @LyhneRC2 ай бұрын

  As far as I can see the only things you need is front and rear bodyposts part number K989-50 and K989-51, the 284010 body shell and some small screws. You could consider also using the cheaper K989/K969 body shell which has same measurements or the 284131 body. You got me inspired, maybe I will also make this conversion - it would look great 👍

• 
  @j.c.proctor2 ай бұрын

  Nice 🔥 👍🏽 💯 💪🏽

• 
  @LyhneRC2 ай бұрын

  Thanks, it was a great day on the tracks 👍

• 
  @KrisLyhne-Xray2 ай бұрын

  Fed video virkelig en fed dag derude. Håber det bliver lige så fedt næste gang👍😊

• 
  @LyhneRC2 ай бұрын

  Ja det var en rigtig god dag og fantastisk vejr 🏎🏎🏎

• 
  @mauishingles42572 ай бұрын

  yeah baby

• 
  @LyhneRC2 ай бұрын

  Thanks 👍

• 
  @tezy01932 ай бұрын

  my spring broke at the gas / brake lever -.-" ... how can something like this even break, god damn china trash .......

• 
  @BBBB-re6ug2 ай бұрын

  Great race, congratulations to the winners

• 
  @LyhneRC2 ай бұрын

  Thanks, they were also happy 🥇🏆😊

• 
  @polowong85582 ай бұрын

  Anyone knows if the 5525 can also fit in the arrma 4s line ? I’m having a lot of slop

• 
  @LyhneRC2 ай бұрын

  I looked at the exploded views of both a 3S and 4S Arrma and all the ball ends seems to have different numbers. But the screw going through the eye of the pivot ball is 3mm for both 3S and 4S, so my guess it that you should be able to use TRX5525 also for Arrma 4S, but you might need more or less shims.

• 
  @sserva31172 ай бұрын

  i wanna make my steering knob more stiffer, how can i do that ?

• 
  @LyhneRC2 ай бұрын

  Hi, is it the turning motion your want to be stiffer or the surface of the wheel?

• 
  @Mugen-MTC2R3 ай бұрын

  Har den hvide bil ingen vinge på?😅

• 
  @LyhneRC3 ай бұрын

  Nej, den kan ikke være der for kameraet. Men der er vægt nok på bagenden alligevel med det tunge kamera 😁

• 
  @skumcat3 ай бұрын

  Husk lige credit for onboard ;)

• 
  @LyhneRC3 ай бұрын

  Det havde jeg faktisk tænkt at jeg ville putte i videoen, men glemte det 😱. Jeg skriver det i beskrivelsen og laver et card til din side hvis jeg kan 😀

• 
  @skumcat3 ай бұрын

  @@LyhneRC Mange tak :) fin video!

• 
  @LyhneRC3 ай бұрын

  @@skumcat Så er der kommet et kort med link på. Hvis vi laver det igen, så kommer der et stort ikon. Det havde jeg helt glemt.

• 
  @clauslyhnejensen41853 ай бұрын

  Haha, Tommy er helt færdig 4:48 😂😂

• 
  @LyhneRC3 ай бұрын

  jeps

• 
  @KrisLyhne-Xray3 ай бұрын

  Lige før man bliver helt nostalgisk😂

• 
  @LyhneRC3 ай бұрын

  Ja det er længe siden, vi er blevet noget bedre 🏎️🏎️

• 
  @KrisLyhne-Xray3 ай бұрын

  Fed video

• 
  @LyhneRC3 ай бұрын

  Tak 👍

• 
  @eduardomalcom22283 ай бұрын

  Hello, to maintain the track, do you do it with a lawn mower or with a edger ? How do you keep it short?' thanks. earring

• 
  @LyhneRC3 ай бұрын

  Hi, it was originally cut with a lawn-tractor and then with "walk behind" lawn mower on lowest possible setting. When the grass is so short and you start driving on it with 1:10+ scale cars the grass will quickly we worn and partly disappear. The biggest problem is that when the grass starts to disappear, then there tends to be small patches with "tough grass" as small bumpy islands - that hadn't happen yet when the video was recorded.

• 
  @eduardomalcom22283 ай бұрын

  @@LyhneRC Ok. Thanks friend

• 
  @LyhneRC3 ай бұрын

  @eduardomalcom2228 you are welcome 😃

• 
  @johnmachter403 ай бұрын

  Great video. Thanks. Do you know a Vetter servo which withstands more bumps? Our broke inside. The gears lost some teeth's because the kids drove into a wall with the front tire. Are there servos with metal gears?

• 
  @LyhneRC3 ай бұрын

  Hi, so far I haven't broken a servo yet, but I have heard good talk about this metal gear servo: www.banggood.com/custlink/KmKPuF02av. So that one I will buy when I break a servo. To further protect the servo you could also use a servo saver like this one: www.aliexpress.com/item/1005006750134547.html

• 
  @jspeedrc3 ай бұрын

  👋🏽✌🏽

• 
  @LyhneRC3 ай бұрын

  👌👍

• 
  @kq70823 ай бұрын

  If you order 284161, be prepared to have to upgrade/change the steering servo. I bought two of them and servos seized and became. non-functional after using it for about an hour. The replacent servo has metal internal gears and seems to have lasted more than an hour.

• 
  @LyhneRC3 ай бұрын

  Ok, good advice. So far I have used mine about 10 hours and the stock servo still runs fine. I haven't had any servo issues on any of my WLToys 1/28. Maybe you just had an unlucky batch - but still pretty annoying

• 
  @kq70823 ай бұрын

  I know right? Bad luck from two different vendors! Ive seen people running them pretty hard on KZread. At least people can know replacement servos can work if needed.

• 
  @jameshedden15704 ай бұрын

  Can anyone tell me if there are oil-filled shocks that will fit the 284161 model.

• 
  @LyhneRC4 ай бұрын

  Hi, I haven’t searched for that, so I’m not sure - sorry