Пікірлер

• 
  @surfside759 күн бұрын

  Really needing advice. I have a fully dressed all metal Arrma Mojave already, but wanting a big wheel monster truck basher. -Kraton 4s $450 or Kraton v5 6s $550.

• 
  @HEAT_RC8 күн бұрын

  I like the bigger more powerful cars so I'm biased but I'd say go team corally the kagama is a beast! 🫶

• 
  @Diaszurana9 күн бұрын

  I'm not trying to be that guy, but there is no reason to pay $770 for a Sledge in a world where the 5th scale Redcat Vigilante exist, and only cost $90 more.

• 
  @HEAT_RC8 күн бұрын

  Completely agree, the sledge is so overpriced and the motor mounting system needs changing on it...and the tires are junk 🙄

• 
  @olivierplayer163311 күн бұрын

  can you tell me the lenght of the lexan body without the bumpers please ?

• 
  @johntuff21 күн бұрын

  I have mines paired with a supersonic motor. I haven't had issues with them but it was so much power, that i blew a driveshaft, front and rear diffs on my 1/7 team energy buggy

• 
  @HEAT_RC15 күн бұрын

  Yeah I had the same setup with a supersonic motor it was powerful, this however didn't end well! Thanks for tuning in!

• 
  @philthyco125 күн бұрын

  FSR builds Arrma in their factory..Always has,

• 
  @HEAT_RC15 күн бұрын

  Interesting! Thanks for the comment 🫶

• 
  @jagergerg9771Ай бұрын

  That was a sick jump with the Sledge.

• 
  @HEAT_RC28 күн бұрын

  Thanks for tuning in and for the comment! 🫶

• 
  @dustburnerdustymudders5094Ай бұрын

  Didn’t get the point of the video. This wasn’t a full review or comparison. You were just running back and forth.

• 
  @SteveSoper1979Ай бұрын

  This is super random but you wouldn't be able to measure the width of the plastic driver piece & ball park guess the height of the drivers inside would you? I'm contemplating using that as an interior for another project and I can find the part but the pages never say what size they driver figures are. Much appreciated if you can.

• 
  @HEAT_RCАй бұрын

  I will do just give me a few days im away on holiday 😊

• 
  @amay8282Ай бұрын

  Really appreciate your video and sharing from your experience. Been trying to decide for weeks which one to buy. So glad to hear the donkey looks better in person. It’s been growing on me.

• 
  @HEAT_RCАй бұрын

  Lols! Go for the donkey! Most powerful esc - most durable in general and best for stunting as an RTR! 😊 thanks for watching and for the comment! 😃

• 
  @amay8282Ай бұрын

  @@HEAT_RC Thanks!

• 
  @GaichouАй бұрын

  Hey! Where in the UAE is this? Trying to find a rc park/basher area and no luck so far

• 
  @HEAT_RCАй бұрын

  Hey man this is the golf course car park near to DFC Mall, last time i was there tho security tried to kick me off! 😂

• 
  @NatesRCclipsАй бұрын

  🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

• 
  @HEAT_RCАй бұрын

  🫶🫶

• 
  @cypherzz-_-5804Ай бұрын

  That is so much fun in the sand wow love it! Enjoy brother!

• 
  @HEAT_RCАй бұрын

  Thanks man 🫶

• 
  @MrGonzoifyАй бұрын

  I love my Kagama. I think the cheap tools that come with some cars can cause more problems then help. I would recommend spending 20-40 bux and get some good tools, stripped screws are a super pain. If you spend hundreds on a car, spend a few more on tools.

• 
  @MrGonzoifyАй бұрын

  I meant to say, Arrma does have some cool looking tools that come with some models, not sure about quality.

• 
  @HEAT_RCАй бұрын

  Hey Man, Totally Agree! Stripping screws is super annoying definitely investing a bit for some good hex drivers makes a massive difference!

• 
  @Nlangkirby135Ай бұрын

  I’ve hit myself with my Kaiju from redcat. It indeed smarts.

• 
  @HEAT_RCАй бұрын

  Dangerous Hobby 😂

• 
  @conrow1157Ай бұрын

  Best of the best video! Thanks mate

• 
  @HEAT_RCАй бұрын

  Thanks for the kind comment and thanks for tuning in Mate! 🙏

• 
  @rcplaytime2 ай бұрын

  thats the best kind of walk 😎😎👍👍

• 
  @HEAT_RC2 ай бұрын

  Thanks man

• 
  @aijan2082 ай бұрын

  😍😍😍

• 
  @user-lp2hb2qw5g2 ай бұрын

  ❤

• 
  @HEAT_RC2 ай бұрын

  🫶

• 
  @rufusyoungblood92742 ай бұрын

  💭🤔 😆🤣😂 🫡💯🔥

• 
  @HEAT_RC2 ай бұрын

  😂

• 
  @Marketplace.rc.me.12 ай бұрын

  That's a nice collection

• 
  @HEAT_RC2 ай бұрын

  Thankyou 🫶

• 
  @thepatternforms8592 ай бұрын

  Did you ever try a larger pinion??

• 
  @HEAT_RC2 ай бұрын

  Hey i think i already had an 18 or 19t on there as i remember - i think the issue i was having was the pinion slipping and fouling the motor mount. I could not get a piniom to stay on this motor - it was alsmost like the shaft was vibrating under high rpm...and i noticed doRC also breaking the shaft on his...im not sure if there is an issue there!

• 
  @thepatternforms8592 ай бұрын

  @@HEAT_RC oh wow that’s good to know!

• 
  @JohnRobinson3172 ай бұрын

  Nice bro!!!

• 
  @HEAT_RC2 ай бұрын

  Thanks 🔥

• 
  @johnsorensen57582 ай бұрын

  I have had 3 hobbywing esc fail in last two months 2 brand new quikruns and 1 older sct max10 nor fires just no longer work and its not the switch they come on but dont work and a the 200 amp pro failed 3 months ago not too happy with hobbywing 🤔

• 
  @HEAT_RC2 ай бұрын

  I had a quick run fail too mine is flashing green and red light alternatly and wont recognise programming card 😂 all escs are pissing me off right now but at least it didnt catch fire

• 
  @johnsorensen57582 ай бұрын

  @@HEAT_RC that's the same thing mine are doing 🤔

• 
  @HEAT_RC2 ай бұрын

  @johnsorensen5758 god damn i sense another video coming 😂i upped the brakes and the punch, tested it, it worked fine - came to use it the next day and flashing red and green led and unprogrammable

• 
  @zhy9582 ай бұрын

  🎉еафлйтщк

• 
  @bigaltough2 ай бұрын

  I had the same issue with a surpass esc 160 amp 4s fine 6s 2 mins bang done they r fakes and a pile of 💩💩💩🤣🤣🤣

• 
  @HEAT_RC2 ай бұрын

  Tell me about it man they give you false hope for 2 minutes and let you down - nearly burnt up an expensive lipo too melted all the plastic casing on my nice lipo within a few seconds of the whole car going up

• 
  @bigaltough2 ай бұрын

  @@HEAT_RC I hate to say it but buy cheap, buy twice lol

• 
  @HEAT_RC2 ай бұрын

  @@bigaltough true story 👌

• 
  @Rcdude20072 ай бұрын

  I push my cars way harder there was no reason for that crap esc to catch fire

• 
  @HEAT_RC2 ай бұрын

  Agreed thanks Man 👍

• 
  @VictoriaJones-gy8es2 ай бұрын

  I have 3 of these, in asuga and kagama rollers and my mt8 Over 50 packs through the 3 of them, not skipped a beat, fantastic ESC imo Mt8 run on 4s Kagama and asuga, only ran on 6s, and I've got all 3 drenched in the shower when I'm washing them down Ebay uk i got mine from

• 
  @HEAT_RC2 ай бұрын

  The V2? Interesting! Are you pairing them with supersonic motors??

• 
  @VictoriaJones-gy8es2 ай бұрын

  @@HEAT_RC Yes the 160a v2 and yes both corallys have the 4074 supersonic 2050 kv I've actually took my asuga out today, put 2 6s packs through it

• 
  @HEAT_RC2 ай бұрын

  @VictoriaJones-gy8es I had no issues with my other esc when i ran it with the 1780kv supersonic 4992 it was actually really nice combo

• 
  @VictoriaJones-gy8es2 ай бұрын

  @@HEAT_RC Do Rc did a review on one, in a asuga like mine

• 
  @reho67602 ай бұрын

  Thanks for sharing your experience. The first version of the controller was also not recommended. Apparently, they could only be used safely up to 4s. Unfortunately, nothing has changed. Somewhat surprisingly, the Rocket motors should be very good.

• 
  @HEAT_RC2 ай бұрын

  Yeah agreed rocket motors are really good! Its a shame about this esc!

• 
  @wasa72 ай бұрын

  I was looking at them the other day 😮, I’ve just tried a motor and was impressed with it.

• 
  @HEAT_RC2 ай бұрын

  Yeah the motors are great! But this ESC has design flaws unfortunately 😢

• 
  @HEAT_RC2 ай бұрын

  *Update I have been in touch with the Surpass Hobby Online store on Ali Express and they say they have removed the product from the shelves..So it is defective - beware tho do not buy it from resellers as they are still selling on Ali Express!*

• 
  @johntuff21 күн бұрын

  Shoot i wish i knew this

• 
  @NatesRCclips2 ай бұрын

  I have the 60a seems ok so far

• 
  @HEAT_RC2 ай бұрын

  Yeah i think this is an issue specific to thw 160a

• 
  @TheDudeRc2 ай бұрын

  Wow. This is the 3rd one of those I have seen catch on fire. I wonder if they are just using the old Castle Cremations design? lol So sorry you had to deal with this. Well.... at least it failed before you could break a control arm.

• 
  @HEAT_RC2 ай бұрын

  Haha well it certainly butns like a castle cremations esc 😂 and yes very true! 😂😂

• 
  @kraftcraft29342 ай бұрын

  That's why I run gas 5th scale 😅

• 
  @HEAT_RC2 ай бұрын

  Haha, I think I need to join you 😂

• 
  @rcplaytime2 ай бұрын

  flipping heck 😮that's not good 😢

• 
  @HEAT_RC2 ай бұрын

  I know so annoying 😭not had the kraton out in ages

• 
  @Havingoneofthosedays-2 ай бұрын

  Thanks for info

• 
  @HEAT_RC2 ай бұрын

  Im retracting my previous opinion! 😂

• 
  @Havingoneofthosedays-2 ай бұрын

  @@HEAT_RC good info to know, because those esc’s were on my radar and I never heard anything terrible about them. Glad I’m a subscriber Thanks again

• 
  @scaleworksRC2 ай бұрын

  I know there's a lot of amp draw when you blip the throttle and it's getting going from a dead stop, but there should be some overheat protection or thermal cutoff for sure 👍

• 
  @HEAT_RC2 ай бұрын

  I hear you on the amp draw, i was hardly going into the throttle tho and three minutes in 😢

• 
  @HEAT_RC2 ай бұрын

  Thanks For Tuning in! Did i do something wrong? Drop a comment below! 🤟

• 
  @Marketplace.rc.me.112 күн бұрын

  Can I just ask sum questions plz. Mate. What size pinion was you using, what motor did you have connected. What batteries were you using. Only ask as have a couple of the combos. And this video as scared me.

• 
  @AbdulazizAlmarzooqi-fh8gc2 ай бұрын

  Did it overheat? Do I need a cooling fan?

• 
  @HEAT_RC2 ай бұрын

  Hey no it didnt overheat and it was 30 degrees C and constant running 2 6s packs

• 
  @HEAT_RC2 ай бұрын

  Fan is never a bad idea tho 💡

• 
  @The_soviet_uni.n2 ай бұрын

  How does it stop upright in mid air is it some sort of inbuilt gyroscope (if you can't tell I'm not really an RC guy😅)

• 
  @HEAT_RC2 ай бұрын

  Hey no worries! Great Question! When you hit the brakes the mass of the wheels slowing down stops the car from rotating. I think thats the easiest way to explain it 😂 so to make it backflip accelerate on take off and to make it stop rotating brake 😊

• 
  @The_soviet_uni.n2 ай бұрын

  @@HEAT_RC that's clever, thanks!

• 
  @rcplaytime2 ай бұрын

  excellent control in the air 👌🤙🤙😎😎

• 
  @HEAT_RC2 ай бұрын

  Its the Best 6s truggy RTR by far 🤟👍 so controllable

• 
  @AaronBittenbender2 ай бұрын

  Wanted to see the durability test. False

• 
  @HEAT_RC2 ай бұрын

  Aw its coming....but not from the 29th floor 😂

• 
  @AaronBittenbender2 ай бұрын

  Come on. That’s y I stuck around. Do it. No balls

• 
  @HEAT_RC2 ай бұрын

  @AaronBittenbender its not in the title just a bit of fun 😉 if the video gets 1mil views ill do it 😂😉

• 
  @AaronBittenbender2 ай бұрын

  Wishful thinking I guess. 😉

• 
  @RCBodgery2 ай бұрын

  What a beast! 😊

• 
  @HEAT_RC2 ай бұрын

  Love this Car 🤟👍

• 
  @samoanpride7532 ай бұрын

  Brother! Holy crap! ouchie! 😂👍🔥

• 
  @HEAT_RC2 ай бұрын

  Haha 2 Weeks Later and my Leg is still a mess 😂 having to elevate it all the time 😂

• 
  @rcplaytime2 ай бұрын

  onnn boarrrd telemetryyy 😀👌 nice upgrades mate 👍😎😎 oh man looking down there made me dizzy 😵 😳 😂

• 
  @HEAT_RC2 ай бұрын

  😂😂 im cursed for speed runs maybe this will help 😂 thanks man bit of bling lol. Its a looooong way down! Takes some getting used too! 😂

• 
  @HEAT_RC2 ай бұрын

  Thanks so much for Tuning in! Dont forget to drop a comment down below and smash the thumbs up! 😁👍 i should mention - there is 1 more hop up you can get - rear chassis brace stiffner but it was out of stock when i purchased from the website.

• 
  @KalsRcAdventures2 ай бұрын

  Nice

• 
  @HEAT_RC2 ай бұрын

  Thanks Man and thanks for tuning in 🫶

• 
  @aijan2082 ай бұрын

  👍🏻👍🏻👍🏻👍🏻

• 
  @HEAT_RC2 ай бұрын

  🫶