Lol @ all the comments from people that watch Daves channel. The engine is staying in the truck so they cant cut a keyway, and even the almighty Dave has said that the pins breaking is actually a very rare problem. Internet warriors.
@merchantautomotive10 сағат бұрын
Exactly
@davidmitchell7183Күн бұрын
I don't think that the pins are a problem if the balancer is torqued to 250ftlbs. Some places are saying that cutting the keyway is a "must do" and a weak spot on the Dirtymax. I think that people either don't replace the one time use bolts or don't get a tool to prevent the engine turning. It's a shame that the balancer has to come off to replace the water pump.
@buildingracingvideos47142 күн бұрын
At least it has a pin and ford's suck
@user-hz6wt6dr6p2 күн бұрын
My information on that bolt was 280ft-lbs
@MartinMartinez-s7x5 күн бұрын
Do you know where can I find the upper half of the valve body of the 10l1000?
@paulm58715 күн бұрын
The water pump must have been replaced recently. And someone probably didn’t torque the harmonic balancer with a new lubricated bolt to 74 ft lbs plus 105 degrees. Which ends up to 325 to 390 ft lbs. Just relaying the info.
@Hitman-ds1ei5 күн бұрын
My guess is its been off at some stage but not replaced bolt or torqued properly as i bet its done couple hundred thousand miles, if the pin was no good it wouldn't last this long
@merchantautomotive5 күн бұрын
It had been apart at some point previously for a water pump, you are correct.
@lennardouellette82546 күн бұрын
Dudes..cut keyway or at least tac weld..or gonna be repeat prob
@merchantautomotive6 күн бұрын
We solved the root problem and performed a proper repair given the situation. I wouldn't put a warranty on it if I didn't trust it.
@michaelfranklinwhibley29356 күн бұрын
Head Crush Washer in fuel heater bleeder dealer
@michaelfranklinwhibley29356 күн бұрын
And thanks I'll have to check on that Taylor dreams transfer case oil made a club noise every time it took off before was my truck I questioned was yolk
@wjm1547 күн бұрын
Is this a transmission valve module?
@merchantautomotive7 күн бұрын
It is a valve body from the 10 speed transmission found in the 2020 and newer Duramax diesel trucks
@theryepicker7 күн бұрын
Can I use this with no engine mods
@merchantautomotive6 күн бұрын
Yep, you sure can. The Work Series may be a better option for you with near stock power levels.
@theryepicker6 күн бұрын
@@merchantautomotiveok I plan on doing bigger injectors soon but would have the power for it before
@merchantautomotive5 күн бұрын
@@theryepicker OK. The Pro Series will allow you to grow as your modifications continue
@charlessessions72937 күн бұрын
Good info thanks 😊
@merchantautomotive6 күн бұрын
Thank you for watching!
@kurtsmith46578 күн бұрын
So you put the same failure prone garbage back on instead of cutting a keyway and doing it properly....nice guys.
@merchantautomotive6 күн бұрын
Since the crankshaft is still in the engine, there is no good way to cut a keyway accurately. We have to balance the best way to repair with the budget of the customer.
@JasperWhite-xj7tr8 күн бұрын
Why didn't you put a key way on it 🎉
@merchantautomotive6 күн бұрын
Since the crankshaft is still in the engine, there is no good way to cut a keyway accurately. We have to balance the best way to repair with the budget of the customer.
@markhuyette85098 күн бұрын
They do anything to save a penny at our expense 😂
@user-id8ng9eq9h12 күн бұрын
How are they and what size do you have?
@merchantautomotive6 күн бұрын
So far, they have been a great tire!
@widowmaker41914 күн бұрын
Bat fix is to machine a keyway in the gear and crankshaft and do away with the pins or you could always get it together and tack it with a rig welder but Dave’s automotive builds a lot of duramax motors and they machine the keyway on every one they build
@merchantautomotive13 күн бұрын
We do the same thing when it comes to any repair where the crank is out of the block.
@Mark-vd8oi14 күн бұрын
ITS A FORD. NOT THE GOOD DAYS OF FORD .NOW THERE JUNK
@merchantautomotive13 күн бұрын
All mechanical things have their problems!
@TheLadderAssist7 күн бұрын
The opening line says duramax?? When did ford start producing super duty’s with duramax engines?
@michaelfranklinwhibley293514 күн бұрын
Dealership in Helicoil where bleeder screw goes copper washer instead of cherry on top
@Seanmilne2215 күн бұрын
i need to replace the mirror glass for this model and cannot for the life of me find it available online. any advice?
@kolerfeft577318 күн бұрын
Do you guys key the crank?
@merchantautomotive18 күн бұрын
Anytime the engine is disassembled for overhaul absolutely. This is a in Chassis repair so we are not able to key it the same way.
@codymurphy740315 күн бұрын
Did you separate the reluctor wheel from the gear before removing. And then feather the bolts back in one at a time in order to clear the oil pan?
@merchantautomotive13 күн бұрын
@@codymurphy7403 no, we just grind a notch in the oil pan for clearance. J/K! Yes, how we described is exactly how we do the repair
@tonydicaprio61418 күн бұрын
I designed those cases 😆
@juggalojay598120 күн бұрын
tcm ohh boy did I have fun trying to fix my trans irradic shifting found this to be the problem 😂 I probed everything cause I had put brannew ign switch but it was bad
@juggalojay598120 күн бұрын
Good thing my buddy said ign switch cause I had replaced it so I took it back and got a good one from nappa just cause it's new don't mean it's not broke 😅
@dirtking1920 күн бұрын
Thank you!
@Yourmothersfavewhiteboy20 күн бұрын
You uploaded this for no reason cause not one person cares
@ObeyDeFi21 күн бұрын
What the 😅
@jameskaspar981824 күн бұрын
Nice Job. Thanks for the Tutorial on how to perform this task.
@cody6.6max24 күн бұрын
What’s the torque spec on the lb7 cp3 high pressure fitting to rail ???
@ericmerchant364622 күн бұрын
50-60 ft lbs is adequate
@cesarmolina262519 күн бұрын
Honestly bro. I just hand tight them. Swapped all my fuel relating things. All hand tight and no leaks at all. Been running good. But man dont over do it
@AMG43ramirez27 күн бұрын
Transmission in neutral but with the shift lever or down on the bottom?
@allstarsk33129 күн бұрын
Does the plunger stay hard after priming?
@ScannerDannerАй бұрын
Eric! 😊 I'm subscribed
@cruzmascorro9277Ай бұрын
Discount Tire has them
@TedPardickАй бұрын
Can't thank you enough for such an informative video!!
@michaelclowserАй бұрын
If you happen to remove the rubber plunger that you state not to remove but on the top (it was before I watched this video) is there a way to put it back or can you buy a new one? If so what is it called and do you know the part number?
@merchantautomotiveАй бұрын
That is not a servicable item unfortunately.
@michaelclowserАй бұрын
@@merchantautomotive so does that mean I need to buy a new filter head?
@mariocorleone106Ай бұрын
If that's factory, what is the point of that opening?
@johnmerlo5005Ай бұрын
Simple first
@wstevenson2004Ай бұрын
Labor cost a lot more to install a shiny new harness and Mass airflow sensor. And that's one to grow on 😊
@merchantautomotiveАй бұрын
Unfortunately it may not have been needed
@treasurethetime2463Ай бұрын
I just wanted to quietest most comfortable tire i could find to put on my 4runner. Searching for that tire made me hate tire reviews because they just make for more confusion. I'm not crawling down mount Rushmore. I just want quiet and not slide around in the rain. It's that impossible to find?
@danieljones8173Ай бұрын
Rays Auto clinton st Binghamton ny, throw the PARTS cannon at it " "ill fix it no matter how much it costs you "
@geoffmooregmАй бұрын
I don't have a diesel myself, so I rarely see under the hood of one. But I notice now they all have filter pressure drop indicators on them! My uncle made the same mistake. He was coming up camping, and my dad was following him. My uncle has an 05 Duramax, and my dad commented on the black smoke he saw every time my uncle would get into the throttle. When they stopped my dad opened the filter box and pulled the filter. The gasket kept it's seal but the pleets were all collapsed. They banged the dirt out as best they could and got to the next town with a parts store. Once they changed the filter, my uncle was like "Damn it's like a new truck." Yea, no kidding. So now he changes it every year mileage be dammed 😂.
@christopherthomas5972Ай бұрын
Laziness i see it daily from other techs use to get upset. Then i realized its guarenteed work for me in the future.
@merchantautomotiveАй бұрын
A reminder for us all, new techs or experienced techs, don’t skip the basics
@Tonyk24Ай бұрын
😂😂😂 man wtf
@stanferris1974Ай бұрын
I can't believe they don't have enough sense to check the intake side of the filter it looks like the lint screen when someone does a couple loades of towles without cleaning it
@merchantautomotiveАй бұрын
Always gotta start with the basics
@cody6.6maxАй бұрын
Ppl are saying they need to replace the whole seal and harness ? Or can I just replace this part?
@merchantautomotiveАй бұрын
You can just replace this seal if the connector body is not damaged. It does not require removal of the pan.
@mattmerchant25522 ай бұрын
What a great idea! I bet you could sell those!
@AxleRods2 ай бұрын
I saved this to my cry it out list. Maybe it'll make me laugh maybe it'll make me cry idk but it hits my feels in a wierd way. I sent it to my wife, we recently seperated. She didn't respond.
@merchantautomotive2 ай бұрын
I would recommend some red wine and possibly some popcorn to help keep those tears at bay. Most will laugh, but indeed, some will cry. I did hear about you and your wife, I was really hoping things would have worked out. You guys were great together. Maybe send her some of our other video's
@tomaskey68442 ай бұрын
Huh! Got to check this out
@tomaskey68442 ай бұрын
Nice! I want the work series. Can you rebuild mine?
Пікірлер
Lol @ all the comments from people that watch Daves channel. The engine is staying in the truck so they cant cut a keyway, and even the almighty Dave has said that the pins breaking is actually a very rare problem. Internet warriors.
Exactly
I don't think that the pins are a problem if the balancer is torqued to 250ftlbs. Some places are saying that cutting the keyway is a "must do" and a weak spot on the Dirtymax. I think that people either don't replace the one time use bolts or don't get a tool to prevent the engine turning. It's a shame that the balancer has to come off to replace the water pump.
At least it has a pin and ford's suck
My information on that bolt was 280ft-lbs
Do you know where can I find the upper half of the valve body of the 10l1000?
The water pump must have been replaced recently. And someone probably didn’t torque the harmonic balancer with a new lubricated bolt to 74 ft lbs plus 105 degrees. Which ends up to 325 to 390 ft lbs. Just relaying the info.
My guess is its been off at some stage but not replaced bolt or torqued properly as i bet its done couple hundred thousand miles, if the pin was no good it wouldn't last this long
It had been apart at some point previously for a water pump, you are correct.
Dudes..cut keyway or at least tac weld..or gonna be repeat prob
We solved the root problem and performed a proper repair given the situation. I wouldn't put a warranty on it if I didn't trust it.
Head Crush Washer in fuel heater bleeder dealer
And thanks I'll have to check on that Taylor dreams transfer case oil made a club noise every time it took off before was my truck I questioned was yolk
Is this a transmission valve module?
It is a valve body from the 10 speed transmission found in the 2020 and newer Duramax diesel trucks
Can I use this with no engine mods
Yep, you sure can. The Work Series may be a better option for you with near stock power levels.
@@merchantautomotiveok I plan on doing bigger injectors soon but would have the power for it before
@@theryepicker OK. The Pro Series will allow you to grow as your modifications continue
Good info thanks 😊
Thank you for watching!
So you put the same failure prone garbage back on instead of cutting a keyway and doing it properly....nice guys.
Since the crankshaft is still in the engine, there is no good way to cut a keyway accurately. We have to balance the best way to repair with the budget of the customer.
Why didn't you put a key way on it 🎉
Since the crankshaft is still in the engine, there is no good way to cut a keyway accurately. We have to balance the best way to repair with the budget of the customer.
They do anything to save a penny at our expense 😂
How are they and what size do you have?
So far, they have been a great tire!
Bat fix is to machine a keyway in the gear and crankshaft and do away with the pins or you could always get it together and tack it with a rig welder but Dave’s automotive builds a lot of duramax motors and they machine the keyway on every one they build
We do the same thing when it comes to any repair where the crank is out of the block.
ITS A FORD. NOT THE GOOD DAYS OF FORD .NOW THERE JUNK
All mechanical things have their problems!
The opening line says duramax?? When did ford start producing super duty’s with duramax engines?
Dealership in Helicoil where bleeder screw goes copper washer instead of cherry on top
i need to replace the mirror glass for this model and cannot for the life of me find it available online. any advice?
Do you guys key the crank?
Anytime the engine is disassembled for overhaul absolutely. This is a in Chassis repair so we are not able to key it the same way.
Did you separate the reluctor wheel from the gear before removing. And then feather the bolts back in one at a time in order to clear the oil pan?
@@codymurphy7403 no, we just grind a notch in the oil pan for clearance. J/K! Yes, how we described is exactly how we do the repair
I designed those cases 😆
tcm ohh boy did I have fun trying to fix my trans irradic shifting found this to be the problem 😂 I probed everything cause I had put brannew ign switch but it was bad
Good thing my buddy said ign switch cause I had replaced it so I took it back and got a good one from nappa just cause it's new don't mean it's not broke 😅
Thank you!
You uploaded this for no reason cause not one person cares
What the 😅
Nice Job. Thanks for the Tutorial on how to perform this task.
What’s the torque spec on the lb7 cp3 high pressure fitting to rail ???
50-60 ft lbs is adequate
Honestly bro. I just hand tight them. Swapped all my fuel relating things. All hand tight and no leaks at all. Been running good. But man dont over do it
Transmission in neutral but with the shift lever or down on the bottom?
Does the plunger stay hard after priming?
Eric! 😊 I'm subscribed
Discount Tire has them
Can't thank you enough for such an informative video!!
If you happen to remove the rubber plunger that you state not to remove but on the top (it was before I watched this video) is there a way to put it back or can you buy a new one? If so what is it called and do you know the part number?
That is not a servicable item unfortunately.
@@merchantautomotive so does that mean I need to buy a new filter head?
If that's factory, what is the point of that opening?
Simple first
Labor cost a lot more to install a shiny new harness and Mass airflow sensor. And that's one to grow on 😊
Unfortunately it may not have been needed
I just wanted to quietest most comfortable tire i could find to put on my 4runner. Searching for that tire made me hate tire reviews because they just make for more confusion. I'm not crawling down mount Rushmore. I just want quiet and not slide around in the rain. It's that impossible to find?
Rays Auto clinton st Binghamton ny, throw the PARTS cannon at it " "ill fix it no matter how much it costs you "
I don't have a diesel myself, so I rarely see under the hood of one. But I notice now they all have filter pressure drop indicators on them! My uncle made the same mistake. He was coming up camping, and my dad was following him. My uncle has an 05 Duramax, and my dad commented on the black smoke he saw every time my uncle would get into the throttle. When they stopped my dad opened the filter box and pulled the filter. The gasket kept it's seal but the pleets were all collapsed. They banged the dirt out as best they could and got to the next town with a parts store. Once they changed the filter, my uncle was like "Damn it's like a new truck." Yea, no kidding. So now he changes it every year mileage be dammed 😂.
Laziness i see it daily from other techs use to get upset. Then i realized its guarenteed work for me in the future.
A reminder for us all, new techs or experienced techs, don’t skip the basics
😂😂😂 man wtf
I can't believe they don't have enough sense to check the intake side of the filter it looks like the lint screen when someone does a couple loades of towles without cleaning it
Always gotta start with the basics
Ppl are saying they need to replace the whole seal and harness ? Or can I just replace this part?
You can just replace this seal if the connector body is not damaged. It does not require removal of the pan.
What a great idea! I bet you could sell those!
I saved this to my cry it out list. Maybe it'll make me laugh maybe it'll make me cry idk but it hits my feels in a wierd way. I sent it to my wife, we recently seperated. She didn't respond.
I would recommend some red wine and possibly some popcorn to help keep those tears at bay. Most will laugh, but indeed, some will cry. I did hear about you and your wife, I was really hoping things would have worked out. You guys were great together. Maybe send her some of our other video's
Huh! Got to check this out
Nice! I want the work series. Can you rebuild mine?
You just want to sell parts! LOL 😂
Hey, at a certain point, its unavoidable! LOL