Stock everything for the engine besides the plenum spacer!
@Vgk3616 күн бұрын
@@clutchgarage might wanna consider thermostatic oil cooler setup. These don't run that much oil so an extra quart plus cooling is your friend. Example BMW e90 chassis are almost 7 quarts.
@clutchgarage16 күн бұрын
@@Vgk36 might have to consider it! Been drifting the Z on this current setup for almost 3 years straight and haven’t had an issue with cooling yet haha!
@offdorisАй бұрын
little bit late, but it's stock cooling too?
@BuildingWithSeanАй бұрын
Love the build man, and I'm totally on board with you on keeping it simple. Don't need a million horsepower right off the rip. Saw the clip of you driving at Lanier, but are you still driving out there? I just picked up a G35 as a budget drift car, so I'll be out there soon.
@clutchgarageАй бұрын
That’s awesome!! We still occasionally drift at Lanier it’s just kind of a drive from where we’re at😂 I hope your G35 build goes well!!
@BuildingWithSeanАй бұрын
@@clutchgarage Hope to see you out there some time!
@erikcardona1423 ай бұрын
What are the spacers that come with the arms for? Do I need the spacers if I’m putting it on an 06 g35 coupe?
@camfraa94594 ай бұрын
looks great man
@ddplus44444 ай бұрын
Cool your doing this with your brother and super cool he has e46 done simple also i have a 330i i am starting on soon and my son wants the 350z which one in you guys minds is better and how much have you each spent on them at the time of these build breakdown videos Thanks i subbed and would like to see an update on your cars
@clutchgarage4 ай бұрын
Thanks!! The e46 and the Z are actually both really good! The e46 had a power steering pump go bad but other than that they’ve both held up really well!! Hopefully soon we’ll be posting more videos!
@jaxrose95 ай бұрын
No subframe reinforcement?
@TylerZeigler6 ай бұрын
Good video and nice clip at Lanier, I drive there some in a 325ci e46
@ahmadhasan57366 ай бұрын
Nice car❤
@optimu5grime5316 ай бұрын
i love how there isnt like over the top alot exterior mods but still looks sick !
@Kinghippo24.78 ай бұрын
Beautiful
@jeinks32498 ай бұрын
I think you did it in right order....
@rocco35458 ай бұрын
what is the body kit? i love it
@clutchgarage8 ай бұрын
Car has Big Duck Club over fenders, 2f performance aero kit!
@davislambert16058 ай бұрын
Wheres the polecat video? im a recent ITRACK event goer!
@Ferr_ALV10 ай бұрын
You from GA? I see u drift at lanier lol
@swastikgrover341410 ай бұрын
Sick build man, how much did it cost to buy and how much for the mods
@7lo556 Жыл бұрын
what's the name of that bodykit??
@ruffraff4697 Жыл бұрын
Bro pls give some insight on the abs bypass too much understeer pls
@clutchgarage Жыл бұрын
On the front driver side wheel there’s a little black box with a blue and green plug, unplug the blue plug! Also try running wider tires on the front and the understeer issue may be from the oem sway bar if you have it still!
@cursanic8997 Жыл бұрын
What spring rate are the coilovers?
@atn2666 Жыл бұрын
You need a mic
@sc2youtube744 Жыл бұрын
Hi there! If you had to use the car as a daily but wanted to drift too, what differntial would you use? Don't mind spending a little too get a diff that can be used for both street and drifting.
@clutchgarage Жыл бұрын
The e46 330s with an automatic transmission have a 3.38 ratio I believe which would work fairly well!
@sc2youtube744 Жыл бұрын
@ClutchGarage thanks for the advice! The 3.38 from the 330i seems like an awesome option for some extra power but can you drift on that diff? I thought it was an open diff?
@WhamThankBam Жыл бұрын
What wheels are those?👀
@clutchgarage Жыл бұрын
Work Emotion T5r!!
@druvski Жыл бұрын
Great Video! Greetings from a fresh Z owner from Germany😂✌🏼
@bencrosbie Жыл бұрын
I love the suspension setup. the Z looks sexy
@bencrosbie Жыл бұрын
I love your car! nice build
@kelruos Жыл бұрын
I have the same car! I'm trying to build a casual drift/street car. Would love to see more videos of your car
@jurajmiskovic9920 Жыл бұрын
this tuning looks so GOOOOD
@kanuzii3013 Жыл бұрын
fucking beautiful
@bogdanbucalet4052 Жыл бұрын
hi! what tires do you run on the back?? some specs plz
@clutchgarage Жыл бұрын
Usually 235/40r18 or 225/40 r18!
@theglassarrow_ Жыл бұрын
Finally, not some over blown drift build.
@bennydafnas9846 Жыл бұрын
Yoooo Was that Lanier raceway? I’m currently building my Z I’m up in the north ga area
@clutchgarage Жыл бұрын
It was! We’re down near Savannah:)
@bennydafnas9846 Жыл бұрын
@@clutchgaragegreat video man! Audio was a little quite but like you said it was the first video. 🤙🏽
@chumpmark3884 Жыл бұрын
This video is so helpful for me. I just want to build a plain simple drift car and this was amazing to watch. So straightforward and real
@clutchgarage Жыл бұрын
Simple is better!!! Thanks for watching!!
@TehKairo Жыл бұрын
4:13 is that insane understeering or?
@Vgedzo Жыл бұрын
Buddy, while putting bodykit you widen your trackwidth by a lot with kit, is the power enough ? As im thinking or widen or not as im afraid hp wont be enough
@clutchgarage Жыл бұрын
The car only runs 235/40 tires so the horsepower is still enough!!
@enchie_702 Жыл бұрын
Great video Bro! I just followed your ig too, we need to see More 🙏🏻🙏🏻🙏🏻
@enchie_702 Жыл бұрын
Ohh btw what wheels/ tires combo specs are those? In the Market to buy some cosmis as well
@z34alan89 Жыл бұрын
How are you liking the isr toe arms? Haven't seen anyone running these and would like to know if I should go for it.
@kevbo.t Жыл бұрын
love the wheels bro, im ab to change my steering reservoir (think that’s what it’s called, sorry i’m new to this car stuff) and i saw you had a different one in the video, does it benefits lot? my stock one just leaks like crazy, it’s all greasy haha
@clutchgarage Жыл бұрын
It does benefit! The oem power steering reservoir will allow the fluid to get air bubbles but the ChaseBays reservoir is baffled to prevent that!
@Dingo.100 Жыл бұрын
Wheel specs?
@clutchgarage Жыл бұрын
They are all 18x10.5 +22
@Dingo.100 Жыл бұрын
@@clutchgarage my man
@Dingo.100 Жыл бұрын
Wow that guys seems extremely chill jeez
@NorthernChev Жыл бұрын
So, the aero adds absolutely no benefit for drifting. But it does make the car heavier. OK, got it.
@michaelmendez9423 Жыл бұрын
Yes not everything has to be beneficial😎
@clutchgarage Жыл бұрын
The whole kit is fiberglass so it’s actually fairly light!! But yes looks are half the sport! Haha
@IshoGT Жыл бұрын
Why would you want to add aero for drifting?🤣🤣
@NorthernChev Жыл бұрын
@@IshoGT IKR?
@envisk821 Жыл бұрын
Did you convert to 5x114?
@clutchgarage Жыл бұрын
The wheels were re-drilled to 5x120!
@bh5697 Жыл бұрын
Legit! Like how low key and straightforward your build is!
@NateAnde Жыл бұрын
Great video! Audio a bit quiet
@clutchgarage Жыл бұрын
Thanks! The audio is definitely quiet at heck on this video haha, we’ll just blame that on it being a first try😂
@faizanmohiuddin8788 Жыл бұрын
I just installed my rear toe arms too less than a week ago, however everything I’m reading is pointing me to an eccentric lockout kit, do the factory eccentric bolts slip or loosen over time or from the stress of drifting? Are lockouts necessary?
@clutchgarage Жыл бұрын
They can definitely shift a bit and mess with your alignment so the lockout kit is actually super helpful!
@faizanmohiuddin8788 Жыл бұрын
Thanks for the insight and quick response.
@Vgk36 Жыл бұрын
No subframe reinforcement s ?
@clutchgarage Жыл бұрын
The subframe is reinforced! Forgot to mention that in the video !!
@cursanic8997 Жыл бұрын
@@clutchgarage what kit did you go with?
@dabest2ggsweg522 Жыл бұрын
So stock clutch, brakes, and no hydro? Interested to see what you do man. I recently got a 325i and tryna see what a good build might look like.
@clutchgarage Жыл бұрын
We totally forgot the clutch! The oem clutch was good! However the rear main seal went bad and ruined it so the car now has a tilton clutch! But yeah stock brakes and no hydro!!
@faizanmohiuddin8788 Жыл бұрын
what's the shifter/shift knob set up?
@clutchgarage Жыл бұрын
It’s a GKtech shift knob but the shifter itself is the stock Nissan shifter!
@ZHPBrent Жыл бұрын
Clean
@xFTPxJesusx Жыл бұрын
Dope video man! I wanna get into drifting looking for a Z as we speak 😂
Пікірлер
pod filter on an NA 😂😂😂
So zero cooling mods for oil and power steering?
Stock everything for the engine besides the plenum spacer!
@@clutchgarage might wanna consider thermostatic oil cooler setup. These don't run that much oil so an extra quart plus cooling is your friend. Example BMW e90 chassis are almost 7 quarts.
@@Vgk36 might have to consider it! Been drifting the Z on this current setup for almost 3 years straight and haven’t had an issue with cooling yet haha!
little bit late, but it's stock cooling too?
Love the build man, and I'm totally on board with you on keeping it simple. Don't need a million horsepower right off the rip. Saw the clip of you driving at Lanier, but are you still driving out there? I just picked up a G35 as a budget drift car, so I'll be out there soon.
That’s awesome!! We still occasionally drift at Lanier it’s just kind of a drive from where we’re at😂 I hope your G35 build goes well!!
@@clutchgarage Hope to see you out there some time!
What are the spacers that come with the arms for? Do I need the spacers if I’m putting it on an 06 g35 coupe?
looks great man
Cool your doing this with your brother and super cool he has e46 done simple also i have a 330i i am starting on soon and my son wants the 350z which one in you guys minds is better and how much have you each spent on them at the time of these build breakdown videos Thanks i subbed and would like to see an update on your cars
Thanks!! The e46 and the Z are actually both really good! The e46 had a power steering pump go bad but other than that they’ve both held up really well!! Hopefully soon we’ll be posting more videos!
No subframe reinforcement?
Good video and nice clip at Lanier, I drive there some in a 325ci e46
Nice car❤
i love how there isnt like over the top alot exterior mods but still looks sick !
Beautiful
I think you did it in right order....
what is the body kit? i love it
Car has Big Duck Club over fenders, 2f performance aero kit!
Wheres the polecat video? im a recent ITRACK event goer!
You from GA? I see u drift at lanier lol
Sick build man, how much did it cost to buy and how much for the mods
what's the name of that bodykit??
Bro pls give some insight on the abs bypass too much understeer pls
On the front driver side wheel there’s a little black box with a blue and green plug, unplug the blue plug! Also try running wider tires on the front and the understeer issue may be from the oem sway bar if you have it still!
What spring rate are the coilovers?
You need a mic
Hi there! If you had to use the car as a daily but wanted to drift too, what differntial would you use? Don't mind spending a little too get a diff that can be used for both street and drifting.
The e46 330s with an automatic transmission have a 3.38 ratio I believe which would work fairly well!
@ClutchGarage thanks for the advice! The 3.38 from the 330i seems like an awesome option for some extra power but can you drift on that diff? I thought it was an open diff?
What wheels are those?👀
Work Emotion T5r!!
Great Video! Greetings from a fresh Z owner from Germany😂✌🏼
I love the suspension setup. the Z looks sexy
I love your car! nice build
I have the same car! I'm trying to build a casual drift/street car. Would love to see more videos of your car
this tuning looks so GOOOOD
fucking beautiful
hi! what tires do you run on the back?? some specs plz
Usually 235/40r18 or 225/40 r18!
Finally, not some over blown drift build.
Yoooo Was that Lanier raceway? I’m currently building my Z I’m up in the north ga area
It was! We’re down near Savannah:)
@@clutchgaragegreat video man! Audio was a little quite but like you said it was the first video. 🤙🏽
This video is so helpful for me. I just want to build a plain simple drift car and this was amazing to watch. So straightforward and real
Simple is better!!! Thanks for watching!!
4:13 is that insane understeering or?
Buddy, while putting bodykit you widen your trackwidth by a lot with kit, is the power enough ? As im thinking or widen or not as im afraid hp wont be enough
The car only runs 235/40 tires so the horsepower is still enough!!
Great video Bro! I just followed your ig too, we need to see More 🙏🏻🙏🏻🙏🏻
Ohh btw what wheels/ tires combo specs are those? In the Market to buy some cosmis as well
How are you liking the isr toe arms? Haven't seen anyone running these and would like to know if I should go for it.
love the wheels bro, im ab to change my steering reservoir (think that’s what it’s called, sorry i’m new to this car stuff) and i saw you had a different one in the video, does it benefits lot? my stock one just leaks like crazy, it’s all greasy haha
It does benefit! The oem power steering reservoir will allow the fluid to get air bubbles but the ChaseBays reservoir is baffled to prevent that!
Wheel specs?
They are all 18x10.5 +22
@@clutchgarage my man
Wow that guys seems extremely chill jeez
So, the aero adds absolutely no benefit for drifting. But it does make the car heavier. OK, got it.
Yes not everything has to be beneficial😎
The whole kit is fiberglass so it’s actually fairly light!! But yes looks are half the sport! Haha
Why would you want to add aero for drifting?🤣🤣
@@IshoGT IKR?
Did you convert to 5x114?
The wheels were re-drilled to 5x120!
Legit! Like how low key and straightforward your build is!
Great video! Audio a bit quiet
Thanks! The audio is definitely quiet at heck on this video haha, we’ll just blame that on it being a first try😂
I just installed my rear toe arms too less than a week ago, however everything I’m reading is pointing me to an eccentric lockout kit, do the factory eccentric bolts slip or loosen over time or from the stress of drifting? Are lockouts necessary?
They can definitely shift a bit and mess with your alignment so the lockout kit is actually super helpful!
Thanks for the insight and quick response.
No subframe reinforcement s ?
The subframe is reinforced! Forgot to mention that in the video !!
@@clutchgarage what kit did you go with?
So stock clutch, brakes, and no hydro? Interested to see what you do man. I recently got a 325i and tryna see what a good build might look like.
We totally forgot the clutch! The oem clutch was good! However the rear main seal went bad and ruined it so the car now has a tilton clutch! But yeah stock brakes and no hydro!!
what's the shifter/shift knob set up?
It’s a GKtech shift knob but the shifter itself is the stock Nissan shifter!
Clean
Dope video man! I wanna get into drifting looking for a Z as we speak 😂
same here. All I can find is convertibles haha!