Do you have a wiring guide? I've made mine months ago but it always shows low voltage. I have similar battery pd20w 30ah. Do I need to do something with the battery connection wise?
@Manbuildthing5 күн бұрын
you need a much higher ah battery. 30,000ah-50,000
@cameronrich25366 күн бұрын
Not supposed to plug stuff into.gpio.pins when the device is.on
@AnoekVanDis7 күн бұрын
Is there more about cracking devices connected to the network?
@nickwaah270217 күн бұрын
You have two antennas but only one place attach to the board. How did you attach both antennas?
@buster_brownie392116 күн бұрын
Maybe used jumpers to solder two terminals? That's a great question.
@Manbuildthing11 күн бұрын
i attached them in tandem.
@InvisibleAngel8817 күн бұрын
Hey Bro, what Modell is this? Looks nice
@Manbuildthing17 күн бұрын
Thank you. 😊 its running off of a raspberry pi 5 but the full device is a custom build i did.
@InvisibleAngel8816 күн бұрын
@@Manbuildthing okay very nice
@InvisibleAngel8816 күн бұрын
@@Manbuildthing so you have used a Battery Pack with an portable Screen?
@Manbuildthing16 күн бұрын
@@InvisibleAngel88 I appreciate it! Yes battery pack with portable monitor. alot of monitors dont support Kali linux though. this one does. heres a video that has all the links in the description! its a really cool setup!
@InvisibleAngel8816 күн бұрын
@@Manbuildthing okay thx bro :) good to know, keep up your Work
@buster_brownie392117 күн бұрын
I wish I could like your videos twice. You're awesome.
@Manbuildthing17 күн бұрын
im really happy my videos could reach someone who would value them. im glad to help and appreciate all the support.
@NandDigital17 күн бұрын
Greetings, this is not really using Flipper zero to hack a Wi-Fi signal, just to capture the handshake, you still have to use John the ripper and hash cat, and breaking the WPA2 algorithm is quite complex, and investing $2000.00 dollars on an RTX4090 and months of continuous electricity expenditure.
@todososesportes19 күн бұрын
where I can download the script sniffpmkid ?
@Manbuildthing17 күн бұрын
here you go! I hope this helps... kzread.info/dash/bejne/qYpmw6qqlJTTis4.htmlsi=dZ3Nnif_bbPg8e9X
@RedEvoPro21 күн бұрын
This was by far my hardest solder, even being IPC cert, this connector had me at the brink.
@Manbuildthing21 күн бұрын
it definately does take some doing! sheeeeesh! 😅
@VenFlyte23 күн бұрын
Nice! Must get my hands on the right wifi extension, they were sold out when I ordered my mamal fish friend.
@Manbuildthing23 күн бұрын
amzn.to/3Xa7fd2 i believe these are in stock now!
@Dan-bd1qe24 күн бұрын
Nice, did you make a payload using cash app?
@Manbuildthing24 күн бұрын
thank you! I am working on one. 😊 update videos coming soon!
@Dan-bd1qe19 күн бұрын
@@Manbuildthing how can I get a copy brother?
@Manbuildthing19 күн бұрын
@@Dan-bd1qe im a little snagged on the payload and so its not finished. Are you familiar with creating payloads for the flipper zero? id be glad to find a way for you to get it as is if you want to try and continue where i left off with it.
@Dan-bd1qe17 күн бұрын
@@Manbuildthing Yes, whats the best way to get in contact with you?
@Dan-bd1qe17 күн бұрын
@@Manbuildthing Yes, whats the best way to reach you?
@isidrosebastian82024 күн бұрын
When I try to go add a stage and try to back out or trying to modify the timeout, flipper crashes out on me. Any thoughts on potential issue?
@isidrosebastian82024 күн бұрын
I should add this is the version: Firmware: mntm-004 29-05-2024
@Manbuildthing24 күн бұрын
@@isidrosebastian820 Some people are having this same problem and fixing it by resetting the flipper to factory settings and then reinstalling the momentum firmware. This is probably a momentum problem that they need to address. Roguemaster isnt having issues for me.
@isidrosebastian82024 күн бұрын
@@Manbuildthing this cfw is all new to me, went back to Unleashed and found it also there. Will test with this but its letting me set a timeout this time. Thanks again!
@Manbuildthing24 күн бұрын
@@isidrosebastian820 no problem! keep us updated! others are having this issue as well.
@isidrosebastian82024 күн бұрын
you linked a different github for Marauder do you recommend link or the one you showed in video?
@Manbuildthing17 күн бұрын
the link has step by step and is much easier. so id go with the link.
@scooby512024 күн бұрын
Does this only work on 2.4 or also 5 ghz wifi?
@Manbuildthing24 күн бұрын
This works for both 2.4 and 5ghz!
@skellingtonmusic17024 күн бұрын
Are the antennas needed?
@Manbuildthing24 күн бұрын
They aren't necessarily needed unless your wanting a further distance. but the wifi dev board works great with out them as well!
@skellingtonmusic17024 күн бұрын
@@Manbuildthing thanks! I've added them into my cart along with the soldering tool. Just wanted to know if I could already start without them.
@Manbuildthing24 күн бұрын
@@skellingtonmusic170 absolutely! i hope you have a lot of fun with it!
@randomMan2.033625 күн бұрын
I dont even have a flipper but im planning to get one when I've saved enough Nice video man, keep it up.
Ok. Please for a smartphone please. From belgium, no pc 4:16 , no internet (wifi). Just simpel smartphone and 4g.
@Manbuildthing29 күн бұрын
do you have android or ios?
@williamdalton341529 күн бұрын
@@Manbuildthing android
@Manbuildthing29 күн бұрын
@@williamdalton3415 i got you all the way in Belgium! kzread.info/dash/bejne/rKdo2M5_hKasfps.htmlsi=NRXdzAlFNzEYJcHG
@TriThien-or7ykАй бұрын
what the file cracked.txt?
@ManbuildthingАй бұрын
Its in the description. here is one. github.com/danielmiessler/SecLists/blob/master/Passwords/Common-Credentials/10-million-password-list-top-1000000.txt you can also use any youd like. just type in "password list" on google.
@gamingwithchipdipАй бұрын
Nice video bruh keep up the content
@ManbuildthingАй бұрын
much appreciated bro!
@ManbuildthingАй бұрын
For anyone who is confused on the script i ran in this video when initiating the attack my apologies i should have been more clear! Ive gone ahead and created a quick video showing how i did this, i hope this helps. kzread.info/dash/bejne/qYpmw6qqlJTTis4.htmlsi=94BpvkHyQm9k7bcE
@user-oz7nb2bd4w16 күн бұрын
I need some help with something, where else can I follow you? I'm not always on KZread
@johnnyg8782Ай бұрын
FYI Momentum 003 (you have 002 installed) does NOT have the Script you show (in this video, and your video from May 20th too) - it's completely empty there! I like your video, but it can't be followed on the newest Momentum (and for the life of me I can't find where any scripts like that are available for download... checked like 20 different Github's I have bookmarked for the Flipper Zero... unless I'm missing somewhere somewhere!).
@ManbuildthingАй бұрын
Hey @johnny8782 my apologies for that! At the time of making this video 003 was not released yet. ill definately give it a try though. And as far as the script i should have been more clear but please bare with me i am super new to youtube. lol ill get better. But ive created a quick video for you that will break it down and hopefully help you out! here you go: kzread.info/dash/bejne/qYpmw6qqlJTTis4.htmlsi=94BpvkHyQm9k7bcE
@johnnyg8782Ай бұрын
@@Manbuildthing Awesome man! I appreciate that SO much! (and think it'll help a lot of people watching your videos). Last question (hopefully lol), what is the difference between that and just running Sniff > PMKID? Is it that there's a little extra customization on the script like changing how long it runs for? Thank again.
@ManbuildthingАй бұрын
@@johnnyg8782 so on mines yes the difference is exactly how long it runs. each script you can change things about. i mainly only use that one though. i set it to max 20 seconds. but it depends on the target ap. so some might capture faster and some might take longer. I really appreciate your comments and your support bro! i hope i can help so many people!
@Index-o1234Ай бұрын
Momentum firmware #3 fowards 👎🏼-No Regional Transmisson garbage for your Sub-G app files. Momentum makes it easy.....you get NO firmware from them to unzip from your computer.😝-So you get what their webpage uploads to your flipper Z. 👤-Rage against the Machine.
@ManbuildthingАй бұрын
@@Index-o1234 sounds like ill be staying on roguemaster for now! lol whats your go to firmware?🤔
@gamingwithchipdipАй бұрын
Nice video gang
@ManbuildthingАй бұрын
Thanks alot bro. Appreciate the support.💯
@ManbuildthingАй бұрын
If you want to use dual antennas bypass the ipex socket, just cut the end off of the ipex connector, you will be left with two wires the center one you would solder to both right and left solder points on the wifi device board the center wire you would solder to the bottom solder point of the wifi device board. That way the wifi device board would use both antennas. If this video was helpful please leave a like.
@buster_brownie3921Ай бұрын
Can you make a tutorial on which terminals you solder your antennas to?
@buster_brownie3921Ай бұрын
Are they coaxial ports? I'd love to learn everything you know.
@ManbuildthingАй бұрын
Sorry i thought i replied! sheesh I made this quick video for you... if you need anymore help just comment. kzread.info/dash/bejne/lIidlrtumKmZgbQ.htmlsi=0SUuvhEqsXbzA96S
@buster_brownie392126 күн бұрын
@@Manbuildthing thank you!!!
@HumbertoHacked20 күн бұрын
could ruin the board without an antenna
@randyserano7490Ай бұрын
Nothing new. Same as 11 years ago tutorial. I think the purpose of this video is to introduce the Flipper Zero device which is an ALPHA Wifi device can perform the same function.
@centralpanicАй бұрын
Is this technique adaptable to wpa2 or wpa3?
@ManbuildthingАй бұрын
Wpa and wpa2 can be done using the same method. When we get into wpa3 thats where it gets tricky. There is however a way for wpa3 Some WPA3 networks operate in a "transition mode," which supports both WPA2 and WPA3 to accommodate older devices. In such cases, it might be possible to force a WPA2 connection and then use traditional WPA2 attacks. Basically downgrading wpa3 to wpa2. 😊
@centralpanicАй бұрын
@@Manbuildthing i never knew wpa3 is hackable. thanks for giving us very helpful information.
@ManbuildthingАй бұрын
@@centralpanic absolutely! happy hacking!
@buster_brownie3921Ай бұрын
Wonderful tutorial. Share more please.
@ManbuildthingАй бұрын
Thank you for your support! I definitely will share more.
@buster_brownie3921Ай бұрын
Have you tried roguemaster? I've had a great experience with it.
@ManbuildthingАй бұрын
Yes i like roguemaster the most. i was testing momentum in this video, but ive switched back to RM since.
@christian4158Ай бұрын
How do I build or get the script ?
@ManbuildthingАй бұрын
This is using custom firmware for both the flipper zero and wifi dev board. Here is how you get them both installed...kzread.info/dash/bejne/p22CqcqAaNSYopc.htmlsi=1zShVf31SpYQwSG6
@j.santana7552Ай бұрын
This is cool and can also be done using airmon-ng with aireplay-ng in combination with wireshark
@ManbuildthingАй бұрын
Do you agree its safe to say airmon and ap are the OGs of this stuff? i absolutely looove airmon! I started with it.
@j.santana7552Ай бұрын
@Manbuildthing I believe they are fundamental because at the most basic you just need a laptop and an adapter that offers packet injection. Gadgets are a plus. I love the video btw, I don't have a flipper atm but I hope to get one too because it sure looks fun
@ManbuildthingАй бұрын
i totally agree! I love my flipper as well, I learn more about its capabilities everyday. soo versatile. thank you so much for your support. ❤
@elden4267Ай бұрын
penetration test 💀
@iyeetsecurity922Ай бұрын
I made my own ~2-3 years ago and it's working great and was less than half the price to build. It's comparable to the older WFP though, not the M7. You can still make one, but the donor devices aren't as easy to find now. If you're interested and want an afternoon project, here's the tut: linuxoperator.com/guides/ar150/
@ManbuildthingАй бұрын
this looks like a super cool and fun project! thank you we appreciate the tutorial :)
@albertomatos5843Ай бұрын
what u think off wifi pineapple from hak5? is it worth buying ??? nice video btw keep t good work
@ManbuildthingАй бұрын
i appreciate you! as far as The WiFi Pineapple Mark VII its amazing! it is a powerful tool for WiFi security auditing and penetration testing. It features automated vulnerability assessments, an interactive recon dashboard, and a suite for man-in-the-middle attacks. Equipped with advanced processors, multiple radios, and the PineAP suite, it delivers high performance in tough environments. It’s easy to use via a web interface, supports various apps, and offers remote access through Cloud C2.
@ManbuildthingАй бұрын
@albertomatos5843 for you bro.💯 kzread.info/dash/bejne/i6KulJRwfNa2c9Y.htmlsi=xKgSKH4XPpM4lW7d
@albertomatos5843Ай бұрын
@@Manbuildthing but hv u used it ? recently? cuz ive seen a lot of bad reviews lately
@ManbuildthingАй бұрын
I have, i feel like if it does what its intended to do then one can only base the review on their skillset. You get me? Because its going to do whats its made to do, but do you know how to make it do what its supposed to do? you get me?
@SirhwpАй бұрын
Hey mate, can you perhaps share the script?
@ManbuildthingАй бұрын
He im not sure the script your after. For everything in this video its all built into the firmwares ive shown how to install. But if there is a specific script your after id be glad to go into my flipper and get it for you :)
@aaroncashattАй бұрын
Can u plz make a video showing hashcat deciphering the passwords
@ManbuildthingАй бұрын
@@aaroncashatt Im editing it as we speak! i got you bro!
@ManbuildthingАй бұрын
@@aaroncashatt kzread.info/dash/bejne/X56qwa1qgNasqco.htmlsi=q3P772anGJzNQ97T Here you go bro.
@ManbuildthingАй бұрын
Hey @sirhwp my apologies here is that script you asked for. kzread.info/dash/bejne/qYpmw6qqlJTTis4.htmlsi=94BpvkHyQm9k7bcE
@user-ng4eo4gb6nАй бұрын
What are the specs on the power bank?
@ManbuildthingАй бұрын
Im using a 50,000mAh power bank for mines. ive added links to the exact components i used for my build in the description! goodluck with your build!
@famose_doseАй бұрын
which harware specs does this thing have?
@ManbuildthingАй бұрын
I have a video explaining. here kzread.info/dash/bejne/n6CCz8OehtTZqLQ.htmlsi=Ic43nTZkuVCBIdOF
@albertomatos5843Ай бұрын
which display is dat is it for raspberry pi ? or a regural touch monitor ? plz do a video on how u did it
@ManbuildthingАй бұрын
It isnt specifically for the raspberry pi. I have a full build video coming, and i will drop all the parts i used!
Пікірлер
Great video bro very descriptive and helpful
Thank you for the support!
Do you have a wiring guide? I've made mine months ago but it always shows low voltage. I have similar battery pd20w 30ah. Do I need to do something with the battery connection wise?
you need a much higher ah battery. 30,000ah-50,000
Not supposed to plug stuff into.gpio.pins when the device is.on
Is there more about cracking devices connected to the network?
You have two antennas but only one place attach to the board. How did you attach both antennas?
Maybe used jumpers to solder two terminals? That's a great question.
i attached them in tandem.
Hey Bro, what Modell is this? Looks nice
Thank you. 😊 its running off of a raspberry pi 5 but the full device is a custom build i did.
@@Manbuildthing okay very nice
@@Manbuildthing so you have used a Battery Pack with an portable Screen?
@@InvisibleAngel88 I appreciate it! Yes battery pack with portable monitor. alot of monitors dont support Kali linux though. this one does. heres a video that has all the links in the description! its a really cool setup!
@@Manbuildthing okay thx bro :) good to know, keep up your Work
I wish I could like your videos twice. You're awesome.
im really happy my videos could reach someone who would value them. im glad to help and appreciate all the support.
Greetings, this is not really using Flipper zero to hack a Wi-Fi signal, just to capture the handshake, you still have to use John the ripper and hash cat, and breaking the WPA2 algorithm is quite complex, and investing $2000.00 dollars on an RTX4090 and months of continuous electricity expenditure.
where I can download the script sniffpmkid ?
here you go! I hope this helps... kzread.info/dash/bejne/qYpmw6qqlJTTis4.htmlsi=dZ3Nnif_bbPg8e9X
This was by far my hardest solder, even being IPC cert, this connector had me at the brink.
it definately does take some doing! sheeeeesh! 😅
Nice! Must get my hands on the right wifi extension, they were sold out when I ordered my mamal fish friend.
amzn.to/3Xa7fd2 i believe these are in stock now!
Nice, did you make a payload using cash app?
thank you! I am working on one. 😊 update videos coming soon!
@@Manbuildthing how can I get a copy brother?
@@Dan-bd1qe im a little snagged on the payload and so its not finished. Are you familiar with creating payloads for the flipper zero? id be glad to find a way for you to get it as is if you want to try and continue where i left off with it.
@@Manbuildthing Yes, whats the best way to get in contact with you?
@@Manbuildthing Yes, whats the best way to reach you?
When I try to go add a stage and try to back out or trying to modify the timeout, flipper crashes out on me. Any thoughts on potential issue?
I should add this is the version: Firmware: mntm-004 29-05-2024
@@isidrosebastian820 Some people are having this same problem and fixing it by resetting the flipper to factory settings and then reinstalling the momentum firmware. This is probably a momentum problem that they need to address. Roguemaster isnt having issues for me.
@@Manbuildthing this cfw is all new to me, went back to Unleashed and found it also there. Will test with this but its letting me set a timeout this time. Thanks again!
@@isidrosebastian820 no problem! keep us updated! others are having this issue as well.
you linked a different github for Marauder do you recommend link or the one you showed in video?
the link has step by step and is much easier. so id go with the link.
Does this only work on 2.4 or also 5 ghz wifi?
This works for both 2.4 and 5ghz!
Are the antennas needed?
They aren't necessarily needed unless your wanting a further distance. but the wifi dev board works great with out them as well!
@@Manbuildthing thanks! I've added them into my cart along with the soldering tool. Just wanted to know if I could already start without them.
@@skellingtonmusic170 absolutely! i hope you have a lot of fun with it!
I dont even have a flipper but im planning to get one when I've saved enough Nice video man, keep it up.
Man! come back and let us know when you get it!
Yes I would like to see you do it
kzread.info/dash/bejne/X56qwa1qgNasqco.htmlsi=IBkKUvUimHRZ44hC
Wonderful video! Thank you!
no problem💯
Ok. Please for a smartphone please. From belgium, no pc 4:16 , no internet (wifi). Just simpel smartphone and 4g.
do you have android or ios?
@@Manbuildthing android
@@williamdalton3415 i got you all the way in Belgium! kzread.info/dash/bejne/rKdo2M5_hKasfps.htmlsi=NRXdzAlFNzEYJcHG
what the file cracked.txt?
Its in the description. here is one. github.com/danielmiessler/SecLists/blob/master/Passwords/Common-Credentials/10-million-password-list-top-1000000.txt you can also use any youd like. just type in "password list" on google.
Nice video bruh keep up the content
much appreciated bro!
For anyone who is confused on the script i ran in this video when initiating the attack my apologies i should have been more clear! Ive gone ahead and created a quick video showing how i did this, i hope this helps. kzread.info/dash/bejne/qYpmw6qqlJTTis4.htmlsi=94BpvkHyQm9k7bcE
I need some help with something, where else can I follow you? I'm not always on KZread
FYI Momentum 003 (you have 002 installed) does NOT have the Script you show (in this video, and your video from May 20th too) - it's completely empty there! I like your video, but it can't be followed on the newest Momentum (and for the life of me I can't find where any scripts like that are available for download... checked like 20 different Github's I have bookmarked for the Flipper Zero... unless I'm missing somewhere somewhere!).
Hey @johnny8782 my apologies for that! At the time of making this video 003 was not released yet. ill definately give it a try though. And as far as the script i should have been more clear but please bare with me i am super new to youtube. lol ill get better. But ive created a quick video for you that will break it down and hopefully help you out! here you go: kzread.info/dash/bejne/qYpmw6qqlJTTis4.htmlsi=94BpvkHyQm9k7bcE
@@Manbuildthing Awesome man! I appreciate that SO much! (and think it'll help a lot of people watching your videos). Last question (hopefully lol), what is the difference between that and just running Sniff > PMKID? Is it that there's a little extra customization on the script like changing how long it runs for? Thank again.
@@johnnyg8782 so on mines yes the difference is exactly how long it runs. each script you can change things about. i mainly only use that one though. i set it to max 20 seconds. but it depends on the target ap. so some might capture faster and some might take longer. I really appreciate your comments and your support bro! i hope i can help so many people!
Momentum firmware #3 fowards 👎🏼-No Regional Transmisson garbage for your Sub-G app files. Momentum makes it easy.....you get NO firmware from them to unzip from your computer.😝-So you get what their webpage uploads to your flipper Z. 👤-Rage against the Machine.
@@Index-o1234 sounds like ill be staying on roguemaster for now! lol whats your go to firmware?🤔
Nice video gang
Thanks alot bro. Appreciate the support.💯
If you want to use dual antennas bypass the ipex socket, just cut the end off of the ipex connector, you will be left with two wires the center one you would solder to both right and left solder points on the wifi device board the center wire you would solder to the bottom solder point of the wifi device board. That way the wifi device board would use both antennas. If this video was helpful please leave a like.
Can you make a tutorial on which terminals you solder your antennas to?
Are they coaxial ports? I'd love to learn everything you know.
Sorry i thought i replied! sheesh I made this quick video for you... if you need anymore help just comment. kzread.info/dash/bejne/lIidlrtumKmZgbQ.htmlsi=0SUuvhEqsXbzA96S
@@Manbuildthing thank you!!!
could ruin the board without an antenna
Nothing new. Same as 11 years ago tutorial. I think the purpose of this video is to introduce the Flipper Zero device which is an ALPHA Wifi device can perform the same function.
Is this technique adaptable to wpa2 or wpa3?
Wpa and wpa2 can be done using the same method. When we get into wpa3 thats where it gets tricky. There is however a way for wpa3 Some WPA3 networks operate in a "transition mode," which supports both WPA2 and WPA3 to accommodate older devices. In such cases, it might be possible to force a WPA2 connection and then use traditional WPA2 attacks. Basically downgrading wpa3 to wpa2. 😊
@@Manbuildthing i never knew wpa3 is hackable. thanks for giving us very helpful information.
@@centralpanic absolutely! happy hacking!
Wonderful tutorial. Share more please.
Thank you for your support! I definitely will share more.
Have you tried roguemaster? I've had a great experience with it.
Yes i like roguemaster the most. i was testing momentum in this video, but ive switched back to RM since.
How do I build or get the script ?
This is using custom firmware for both the flipper zero and wifi dev board. Here is how you get them both installed...kzread.info/dash/bejne/p22CqcqAaNSYopc.htmlsi=1zShVf31SpYQwSG6
This is cool and can also be done using airmon-ng with aireplay-ng in combination with wireshark
Do you agree its safe to say airmon and ap are the OGs of this stuff? i absolutely looove airmon! I started with it.
@Manbuildthing I believe they are fundamental because at the most basic you just need a laptop and an adapter that offers packet injection. Gadgets are a plus. I love the video btw, I don't have a flipper atm but I hope to get one too because it sure looks fun
i totally agree! I love my flipper as well, I learn more about its capabilities everyday. soo versatile. thank you so much for your support. ❤
penetration test 💀
I made my own ~2-3 years ago and it's working great and was less than half the price to build. It's comparable to the older WFP though, not the M7. You can still make one, but the donor devices aren't as easy to find now. If you're interested and want an afternoon project, here's the tut: linuxoperator.com/guides/ar150/
this looks like a super cool and fun project! thank you we appreciate the tutorial :)
what u think off wifi pineapple from hak5? is it worth buying ??? nice video btw keep t good work
i appreciate you! as far as The WiFi Pineapple Mark VII its amazing! it is a powerful tool for WiFi security auditing and penetration testing. It features automated vulnerability assessments, an interactive recon dashboard, and a suite for man-in-the-middle attacks. Equipped with advanced processors, multiple radios, and the PineAP suite, it delivers high performance in tough environments. It’s easy to use via a web interface, supports various apps, and offers remote access through Cloud C2.
@albertomatos5843 for you bro.💯 kzread.info/dash/bejne/i6KulJRwfNa2c9Y.htmlsi=xKgSKH4XPpM4lW7d
@@Manbuildthing but hv u used it ? recently? cuz ive seen a lot of bad reviews lately
I have, i feel like if it does what its intended to do then one can only base the review on their skillset. You get me? Because its going to do whats its made to do, but do you know how to make it do what its supposed to do? you get me?
Hey mate, can you perhaps share the script?
He im not sure the script your after. For everything in this video its all built into the firmwares ive shown how to install. But if there is a specific script your after id be glad to go into my flipper and get it for you :)
Can u plz make a video showing hashcat deciphering the passwords
@@aaroncashatt Im editing it as we speak! i got you bro!
@@aaroncashatt kzread.info/dash/bejne/X56qwa1qgNasqco.htmlsi=q3P772anGJzNQ97T Here you go bro.
Hey @sirhwp my apologies here is that script you asked for. kzread.info/dash/bejne/qYpmw6qqlJTTis4.htmlsi=94BpvkHyQm9k7bcE
What are the specs on the power bank?
Im using a 50,000mAh power bank for mines. ive added links to the exact components i used for my build in the description! goodluck with your build!
which harware specs does this thing have?
I have a video explaining. here kzread.info/dash/bejne/n6CCz8OehtTZqLQ.htmlsi=Ic43nTZkuVCBIdOF
which display is dat is it for raspberry pi ? or a regural touch monitor ? plz do a video on how u did it
It isnt specifically for the raspberry pi. I have a full build video coming, and i will drop all the parts i used!
🎉