Пікірлер

• 
  @basterbogt14 күн бұрын

  I dont have powersteering on my e46 racecar. Its a nightmare. Not worth it

• 
  @Born1148316 күн бұрын

  Do You make plug & play harnesses for Mercedes ??

• 
  @RaceGerman16 күн бұрын

  We do not. BMW parts company

• 
  @JAKEWJONES17 күн бұрын

  I am just swapping a non-power Z4 rack into my 1999 BMW Z3 Coupe.

• 
  @JAKEWJONES17 күн бұрын

  What made you put that loud music over your voice? I am having trouble discerning what you are saying.

• 
  @RaceGerman17 күн бұрын

  Not sure. This video was made years ago before we really knew how to edit. Is what it is.

• 
  @1ofhis51824 күн бұрын

  Excellent video

• 
  @imnotaАй бұрын

  Have the same one as the amazon one, paid 30$ for it. Needed it once on a car with VERY thick quarter panels, with one that was baconed and dented, so it didn't just need to roll the fender I needed to pull it and straighten the damaged parts. It did fine, even when reefing on that handle, only issue I ever had was that lock nut that goes on the end of the jack screw, it got loose twice on me before I tack welded it on. It's a design fault that the eastwood also has, whole jack screw is spinning so obviously it wants to loosen the nut. Should have a cotter pin or something, nylon lock nut doesn't suffice. I would get the nicer one if I had a business or something but for personal use, it's one of those tools that only gets used once every few years on which you can cheap out IMO

• 
  @xayantriv627Ай бұрын

  Fire vid, I knew it was Florida 3 seconds in, that heat is exhausting to work in so the space will be much better

• 
  @GFXRadiantАй бұрын

  Smol garage tings 🫶🏽

• 
  @RaceGermanАй бұрын

  Yes. We have a bigger warehouse too. Check our other videos. This is just a small shop for light work and video content. Stay tuned!

• 
  @PhanOT11Ай бұрын

  Out of stock?

• 
  @RaceGermanАй бұрын

  We only have the Bluetooth version available. Continental stopped making the cd/bluetooth

• 
  @abassplayer4lifeАй бұрын

  Nice. And very cool sound track.

• 
  @TomGlMusicАй бұрын

  are they also suitable for drifting?

• 
  @RaceGermanАй бұрын

  Yes, they are used for drifting quite a bit. I would suggest the stance version as it uses stiffer springs.

• 
  @TomGlMusicАй бұрын

  @@RaceGerman thank you

• 
  @gummy9431Ай бұрын

  I liked this video a lot, as it showed you could get the toolbox into position by yourself! Were you able to get the hutch on there by yourself, or did you need to use a call a friend lifeline?

• 
  @RaceGermanАй бұрын

  I actually was able to get the hutch on myself, but did not show it, because of the comments.. haha. It's very very heavy. You can't lift it. What I did was drug the hutch over to box and lifted one end on top of the main box. Then lifted the other end and swung it over. About only way you can do it by yourself.

• 
  @gummy9431Ай бұрын

  @@RaceGerman Thanks for responding! This info was super helpful. I’ll try your method to do it myself, but if I end up literally over my head with it, sounds like maybe two heads will be better than one, hahaha! I appreciate your detailed explanation and the effort in this video. Thanks again, this really helped me!

• 
  @gmans7859Ай бұрын

  Very nice Justin. Keep up the momentum. Looking forward to the content. Yes , time wake up our E30 and Drive it!

• 
  @RaceGermanАй бұрын

  Thanks! Will be much more once lift is installed! Thanks for following

• 
  @TWRX_ChuckАй бұрын

  Really cool it comes with that ramp to get it off the pallet. Harbor freight with the hookup.

• 
  @RaceGermanАй бұрын

  Yeah, def was great thinking by them. HF really stepping up their game

• 
  @Goldenboy-kd8zkАй бұрын

  Can’t wait to see the banner

• 
  @TWRX_ChuckАй бұрын

  Hell yeah, this is the kind of content we need. Setup looks solid. Always like to hear the updates 💪

• 
  @handro123Ай бұрын

  Very interesting "warehouse" space. It looks more like a storage unit / RV storage place. Awesome that they let you install a lift in there and I wish I could find something similar by me. It looks like just 1 power outlet at the front by the light?

• 
  @RaceGermanАй бұрын

  Yeah its a little bigger than a storage unit, but also spray foam insulated. The landloard is letting us run 220v for the lip and other outlets for the shop, so should work out nicely. It was harder finding a smaller warehouse. Most around here are 1200-2500 sq feet, but when this popped up it was a perfect space for what we needed it for, since we already have the larger warehouse.

• 
  @handro123Ай бұрын

  @@RaceGerman Very cool! Looking forward to how it turns out.

• 
  @danieldomingues4544Ай бұрын

  It is possible to order the confort ones whith camber plate at the front?

• 
  @RaceGermanАй бұрын

  It is not. The Comfort ones use the stock top hats

• 
  @danieldomingues4544Ай бұрын

  And the best option for daily use its the confor ones ore the street? For e36 what are the spring rates in both, in kg please

• 
  @RaceGermanАй бұрын

  Street version is very comfortable. All the information is on our website. Thanks!

• 
  @AFatherToTheFatherless2 ай бұрын

  Now do a tutorial on how to bleed out

• 
  @ThomasNappo2 ай бұрын

  Best Solid looking jack out there..😊

• 
  @ranakirti2 ай бұрын

  how much different are the Street bs Comfort version ?

• 
  @RaceGerman2 ай бұрын

  Just the spring rates. The comforter is softer more like stock

• 
  @obs66302 ай бұрын

  WORD OF ADVICE: DONT BUY THE DAYTONA BRAND. Got all of two uses out of mine and now it doesn't work.

• 
  @RaceGerman2 ай бұрын

  We have had ours for years. No issues. Maybe you just got one with bad seals.

• 
  @obs66302 ай бұрын

  @@RaceGerman Maybe but I would expect better from a ~$250 tool. Bled the thing multiple times and nothing. Wasted money on this piece of junk. I would suggest getting the warranty for anybody looking to buy one of these, as you'll probably end up needing it.

• 
  @Vass0462 ай бұрын

  You say "torque to spec" several times throughout. What is the spec?

• 
  @RaceGerman2 ай бұрын

  You can find torque specs in the Bentley manual

• 
  @Vass0462 ай бұрын

  @@RaceGerman Why not just inclure what those are? Bit weird making a tutorial video just to "refer to manual" for the most crucial aspects

• 
  @RaceGerman2 ай бұрын

  Because I don't want to be responsible for that. I'm just showing the process. You should always look up the torques yourself and never go off of memory.

• 
  @asetkoshbanov58063 ай бұрын

  На какой система работает этот двигатель bosch или Siemens?!

• 
  @aldenforbes57413 ай бұрын

  Does the CD version of the VDO work in conjunction with the 6 CD changer in the trunk? The car is a ‘98 Z3 M. Thanks

• 
  @RaceGerman3 ай бұрын

  It does not

• 
  @aldenforbes57413 ай бұрын

  @@RaceGerman Thanks! Too bad:(

• 
  @Techprep233 ай бұрын

  Awesome Now I can do that to my 1 and 1/2 ton I call it a Dana because enough of the letters on one side that says Daytona came off and it says Dayna.

• 
  @7beast2983 ай бұрын

  Awesome video! If u don't mind me asking: what transmission fluid should I use for my transmission? It's a 1998 z3 328i and it has the same MTF-LT1 sticker as your transmission in the video. What oil do u feel is best? Thanks

• 
  @RaceGerman3 ай бұрын

  We use redline. We sell a service kit racegerman.com/products/redline-transmission-service-kit?_pos=5&_sid=db2cba9b6&_ss=r

• 
  @trevondot42443 ай бұрын

  Bro people can roll fenders perfect with a base ball bat , your Amazon one will do fine , n not just saying that because I have an Amazon one.

• 
  @SC_XOLOs3 ай бұрын

  I’m bending a fender, not a steel rod. I could care less about the thickness. As long as it does the same task

• 
  @Mertzy634 ай бұрын

  Dumb question, but would this be the exact same process, kit, etc. for a ZF310?

• 
  @RaceGerman3 ай бұрын

  Yes. It's the same

• 
  @IMFLGUY764 ай бұрын

  Does the thickness of the metal really matter? I haven't tried this yet so im not sure the amount of force applied. The jack screw and welds are the most important

• 
  @Mynameisdiy4 ай бұрын

  No antenna?

• 
  @RaceGerman4 ай бұрын

  You can attach the antenna of course

• 
  @Mynameisdiy4 ай бұрын

  @@RaceGerman didn't know if i needed to purchase some sort of an adaptor or something

• 
  @draker5415 ай бұрын

  How thick of concrete did you go with?

• 
  @RaceGerman4 ай бұрын

  We shot for about 4" but where the lift posts went we dug footers to make it around 12-14" deep.

• 
  @Katiemtz0995 ай бұрын

  did you get these through the website?

• 
  @RaceGerman5 ай бұрын

  We sell them on Racegerman.com

• 
  @alexortega7146 ай бұрын

  Just bought one , very nice and straight to the point , thank you!

• 
  @MicrowavedBunny6 ай бұрын

  thanks!

• 
  @samcarmel69756 ай бұрын

  Have you ever, or heard if it’s possible to rebuild the syncros?

• 
  @theboomster93047 ай бұрын

  Ordered this got it in the mail with a broken display and the Bluetooth wouldn’t work

• 
  @gcordo8 ай бұрын

  I read that the Kyostar spline could fit quite tight on the shaft, is this so? great video!

• 
  @RaceGerman8 ай бұрын

  Not for us. But I can't say that quality control is not a thing.

• 
  @imagezero8 ай бұрын

  Is one cast and one forged or billet? That could ultimately make a big difference in strength.

• 
  @RaceGerman8 ай бұрын

  No, both cast. But I don't think a billet one would make a ton of difference. There is tension or compression placed on the adapter.

• 
  @Bogyver788 ай бұрын

  She's nice looking! Go have fun with her!

• 
  @supersabrosinho8 ай бұрын

  Excellent no nonsense tutorial. Right to the point! brilliant

• 
  @bryanvance66299 ай бұрын

  Yea you're video didn't help. Still falls as I'm pumping. I followed your advice

• 
  @RaceGerman9 ай бұрын

  Sounds like your seals are bad and it's allowing fluid to pass by.

• 
  @alex_rodriguez7779 ай бұрын

  Would this work with a factory M20 fan and fan clutch?

• 
  @RaceGerman9 ай бұрын

  I do not believe so. But you can use the measurements from the video and easily see if it would.

• 
  @spaceexplorer66369 ай бұрын

  Interested in buying the kit. How would I do that. Thanks.

• 
  @RaceGerman9 ай бұрын

  You can purchase on our website. Racegerman.com

• 
  @0megalul3099 ай бұрын

  ali express is better

• 
  @Perceni9 ай бұрын

  I have an oil leak coming from the exhaust studs, how is that possible? not coming from the valve cover since it new

• 
  @RaceGerman9 ай бұрын

  It's not possible. Most likely coming from valve cover. Just because it's new, doesn't mean it's seated correctly.

• 
  @Theoriginalmichaelmiachel8 ай бұрын

  can confirm new ones often leak when not installed properly@@RaceGerman

• 
  @RaceGerman8 ай бұрын

  Well ya. If not installed properly.

• 
  @ARNYKATZ9 ай бұрын

  A well-equipped garage cannot be considered well-equipped if it doesn't have wood blocks. 😊

• 
  @macgroober13969 ай бұрын

  Lisle 58430 is the tool to use for those input/output shaft seals. Not sure what I'd use for the shift shaft.

• 
  @f3cktrackingmydata7709 ай бұрын

  nice i have to drive 20 miles just to go buy jack oil if i wana use this stupid thing today. you would think daytona would add some of this jack oil for the 200$ i paid for it

• 
  @RaceGerman9 ай бұрын

  There is oil in it when you buy. I am just showing how to bleed it if you need to. Walmart or Amazon sells the oil too