5 years late on this and IKEA increased these cabinets a lot in price. However this is handsdown the most genius hack for a shell! What were the finishing touches around the camera hole? It looks like a piece of plastic that covers up the exposed cut wood.
@elymiranda69445 ай бұрын
It's a plastic grommet used on desks for the passthrough hole for cables.
@PriyankoMahanta11 ай бұрын
Wow
@MummyandHarry11 ай бұрын
Google Nest
@richf5165 Жыл бұрын
These Units are now back in IKEA as of now. Just ordered mine. Thanks for this video.
@karolinag5887 Жыл бұрын
How you connect your tablet/ipad to your camera?
@MynameisEpinephrine Жыл бұрын
Just wondering how long or how much do you pull from a shot?
@elymiranda6944 Жыл бұрын
Usually I do 17in/34out in around 30 seconds.
@hardik__baria2 жыл бұрын
how to connect camera to pc ??
@DJVINNIE2 жыл бұрын
Absolutely beautiful, great idea great job
@michellealejandre94682 жыл бұрын
This is awesome 👏 What software and printer was used for this? Thank you
@PurpleGraves2 жыл бұрын
looks heavy
@elymiranda69442 жыл бұрын
Not at all. The two halves are transported separately and they are just shells. My 21 y/o daughter is able to move them around easily.
@jacobdejesus46902 жыл бұрын
looking for the cabinnet but no result
@elymiranda69442 жыл бұрын
I don't think IKEA carries it anymore (at least not in the USA). Sorry.
@Keisha9562 жыл бұрын
is the screen an iPad?
@elymiranda69442 жыл бұрын
No. It's an early generation Microsoft Surface.
@EatTravelHappy2 жыл бұрын
Very good! I've been trying to figure this out for a year. The secret is the twist tie. Awesome it just worked for mine. 💥👍🏻👌🏻
@candacealsenay62243 жыл бұрын
How did you fix the camera mount to the shelf?
@candacealsenay62243 жыл бұрын
How did you mount your camera mount? I see the camera is on a stand, but how did you fix that to the shelf below?
@elymiranda69443 жыл бұрын
Drilled a hole through the shelf and used a bolt that fit the threaded hole of the mount. The mount fits a standard tripod. So it has a standard tripod mount threaded hole.
@MrTipsoTV3 жыл бұрын
Thank you for this video, I've made mine www.pixelsbooth.my
@mathewsmail134 жыл бұрын
Shame on you GoPro
@nk01264 жыл бұрын
❤❤😘
@ScarlettKitsune4 жыл бұрын
What did you use to construct your booth? PVC pipe?
@elymiranda69444 жыл бұрын
Kitsuné Shadow - it was purchased. It’s a 5x5 pop-up tent.
@nestorfraga6814 жыл бұрын
Hola , tengo una impresora Hiti 525 pero no se como configurarla para que corte tiras de 2x6
@miguelvidargas986 Жыл бұрын
tengo el mismo problema
@anastasiamoser28264 жыл бұрын
Great Idee how did you fix the screen?
@benjcap4 жыл бұрын
whats the measurements of the cabinets? they dont sell this at ikea anymore
The finishing touches around the holes are astounding! I am very impressed with this! Good job!
@tradertriggs81484 жыл бұрын
NICE!!!!
@MrTipsoTV4 жыл бұрын
Thanks man..I've made one. instagram.com/pixelsbooth/
@lifelist1m3705 жыл бұрын
Can i do it on my go pro 4 ?
@91PBKID5 жыл бұрын
Can you please email me I'm very interested in working with you and paying your for your services [email protected]
@jakebcampbell5 жыл бұрын
What did you use for the software?
@elymiranda69445 жыл бұрын
This video explains it all. kzread.info/dash/bejne/Ynicz8iioK2baZM.html Software is DSLRbooth
@mrojc10245 жыл бұрын
Do you make n sell ? Just shell
@elymiranda69445 жыл бұрын
No sir.
@gforcex645 жыл бұрын
Great idea! I’m going to make with the 2 cabinets and use an iPad Pro and mount a metal security iPad holder, mount a light to it, and use that! Thank you for making this video!
@AndreTKemp4 жыл бұрын
Thats a good idea. I was going to do that with mine as it makes it really portable ad lightweight. I didnt like how small the ipad was though so wound up using a 22" touch screen.
@DraXgonProductions5 жыл бұрын
Is that a third party shock mount?
@elymiranda69445 жыл бұрын
DraXgonProductions if you mean the mic, no it came with that. But if you’re referring to the black mount that couples the mic mount to the gimbel, I made it and explain how in the video.
@DraXgonProductions5 жыл бұрын
Ely Miranda thanks for the reply. I’m referring to the mic. I looked up the same mic but the shock mount that I’m seeing that comes with the kit is a more traditional shock mount. The one in this video is something I’ve never seen before.
@djjiik79225 жыл бұрын
How did you mount the surface pro? I am curious to know since I am actually working with an 11" I Pad Pro.
@elymiranda69445 жыл бұрын
Search for aluminum C-channel at your big box home store of choice ( www.homedepot.com/s/aluminum%2520c-channel?NCNI-5 ) . I think I used 1/2". I just cut it to the width of the tablet and epoxied it to the inside of the cabinet. The tablet sits in this channel. Then on the shelf behind it, I drilled a hole and inserted a set screw. This screw is tightened until it touches the back of the tablet with enough pressure to keep it in place.
@djjiik79225 жыл бұрын
Do you have any recommendations for any substitutions for the cabinets you purchased? I've been trying to locate for 2 hours now and can't seem to locate... Do you also have the information about the cabinets you purchased such as model # etc?
@elymiranda69445 жыл бұрын
Sorry. I have no other info. I think Ikea may have discontinued the JOSEF.
@djjiik79225 жыл бұрын
Do you have the final demensions like height, width, depth? @@elymiranda6944
@elymiranda69445 жыл бұрын
@@djjiik7922 Looks like it's still available in the UK... dimensions are in this listing... www.ikea.com/gb/en/products/storage-furniture/outdoor-organising/josef-cabinet-in-outdoor-white-art-50213141/
@washingtonreign5 жыл бұрын
I found these IKEA Hallan cabinets which are comparable, and I'm planning to do my own version of this DIY using these ones. www.ikea.com/us/en/catalog/products/S89249403/ There are a few different sizes and configurations available for the Hallan cabinets so you can check out those different sizes and see what works best for you. I opted for the two longer ones that will be stacked like shown in the link.
@kennerg.59984 жыл бұрын
@@washingtonreign Thank you!
@danielLACEUP5 жыл бұрын
Super nice!
@asimations5 жыл бұрын
Google want s to control each and every thing one can think off and we are happy to surrender.
@valeriealexis30235 жыл бұрын
Can you use any camera ?
@elymiranda69445 жыл бұрын
This is totally custom, so you're free to use whatever you like. However, you'll need to make sure the camera is supported by whatever photobooth software you choose.
@graffix215 жыл бұрын
How did you mount the screen?
@graffix215 жыл бұрын
This is the best DIY photo booth on KZread. Great job dude!
@tylerwhitehead9445 жыл бұрын
This is the sleekest solution I've seen so far to having the mic + gimbal rig. Good job sir!
@scover8165 жыл бұрын
nice set up what cabinet is that from Ikea
@elymiranda69445 жыл бұрын
Here's all the info on the build: kzread.info/dash/bejne/Ynicz8iioK2baZM.html
@flipnamedrj5 жыл бұрын
Great Set up! i was wondering if you could show more of how you mounted the monitor to the cabinet. I am just trying to visualized what you put in the description about the c-angle and set screw through the shelf behind it that keeps the monitor in place. Thanks! Good work :)
@elymiranda69445 жыл бұрын
I'm not able to show anything further any time soon. The aluminum c-angle is like in the following link. It's cut to the width of the tablet and the tablet just sits in the channel. In the video at the 1:04 time marker, you see that the shelf holding the camera sits around the top of the tablet. On the front edge of the shelf I drilled a hole that a screw threads through (in the video the camera mount blocks the view of the screw). That screw is tightened just enough for it to touch the back of the tablet and securely hold the tablet in place. Hope this helps. store.buymetal.com/pub/media/catalog/product/cache/7bc4f2e1f0cd846db60d972d8f301a16/a/l/aluminum-channel_62.jpg
@MrTipsoTV5 жыл бұрын
hi, what a great diy. i've buy the josef but how you cut out the monitor, lens & strobe. tq
@elymiranda69445 жыл бұрын
Thanks. Please check out the answer to the same question in the pinned post above by Sunny636
@RAYT7215 жыл бұрын
Ely: thanks so much for this presentation! I have Alexa now but she's hard of hearing and displaying signs of narcolepsy and then amnesia when she wakes up.
@smileywarrior18705 жыл бұрын
This looks great but I would get rid of the bottom cabinet and get a speaker tri-pod to hold it up. Also put the printer in the same cabinet making it super lightweight and compact. Otherwise this setup isn’t bad at all. It all comes down to personal preference. Good work.
@ChrischoBoardgaming5 жыл бұрын
People tend to trip over tripod legs, which aren't very stylish, either. You'd have to cover them up with custom-made cloth or something. Then, there is statics to consider -- something heavy up high on something light might lead to people running into the setup and toppling it. With all the expensive tech inside that's probably a scenario we want to avoid. I've seen setups using tripods and I wasn't amazed; very wobbly.
@PrideOfThePacificTX5 жыл бұрын
Awesome! Thanks mate! Do you know where I can find a cabinet like this? Here in the USA, I don't see this cabinet on the IKEA website. Looking to make one for my wedding next month! Woot woot!
@elymiranda69445 жыл бұрын
It looks like they are no longer stocking it. Will have to find another cabinet to modify.
@nelsonmendieta72365 жыл бұрын
m.ikea.com/us/en/catalog/products/art/30332116/
@washingtonreign5 жыл бұрын
Found this one which is similar www.ikea.com/us/en/catalog/products/S89249403/
@Jennsgottagunful5 жыл бұрын
What did you use to put around the edges of the holes to give them a nice look?
@elymiranda69445 жыл бұрын
@jenna p links to the trim are in the description
@hoimanyip94085 жыл бұрын
How can you find this cabinet, It is show in Ikea !
@buddylee2124446 жыл бұрын
What height is the touch screen, camera, and light
Пікірлер
5 years late on this and IKEA increased these cabinets a lot in price. However this is handsdown the most genius hack for a shell! What were the finishing touches around the camera hole? It looks like a piece of plastic that covers up the exposed cut wood.
It's a plastic grommet used on desks for the passthrough hole for cables.
Wow
Google Nest
These Units are now back in IKEA as of now. Just ordered mine. Thanks for this video.
How you connect your tablet/ipad to your camera?
Just wondering how long or how much do you pull from a shot?
Usually I do 17in/34out in around 30 seconds.
how to connect camera to pc ??
Absolutely beautiful, great idea great job
This is awesome 👏 What software and printer was used for this? Thank you
looks heavy
Not at all. The two halves are transported separately and they are just shells. My 21 y/o daughter is able to move them around easily.
looking for the cabinnet but no result
I don't think IKEA carries it anymore (at least not in the USA). Sorry.
is the screen an iPad?
No. It's an early generation Microsoft Surface.
Very good! I've been trying to figure this out for a year. The secret is the twist tie. Awesome it just worked for mine. 💥👍🏻👌🏻
How did you fix the camera mount to the shelf?
How did you mount your camera mount? I see the camera is on a stand, but how did you fix that to the shelf below?
Drilled a hole through the shelf and used a bolt that fit the threaded hole of the mount. The mount fits a standard tripod. So it has a standard tripod mount threaded hole.
Thank you for this video, I've made mine www.pixelsbooth.my
Shame on you GoPro
❤❤😘
What did you use to construct your booth? PVC pipe?
Kitsuné Shadow - it was purchased. It’s a 5x5 pop-up tent.
Hola , tengo una impresora Hiti 525 pero no se como configurarla para que corte tiras de 2x6
tengo el mismo problema
Great Idee how did you fix the screen?
whats the measurements of the cabinets? they dont sell this at ikea anymore
what are you using for flash ?
www.paulcbuff.com/Flash-Units/alienbees-tm-flash-unit.html
The finishing touches around the holes are astounding! I am very impressed with this! Good job!
NICE!!!!
Thanks man..I've made one. instagram.com/pixelsbooth/
Can i do it on my go pro 4 ?
Can you please email me I'm very interested in working with you and paying your for your services [email protected]
What did you use for the software?
This video explains it all. kzread.info/dash/bejne/Ynicz8iioK2baZM.html Software is DSLRbooth
Do you make n sell ? Just shell
No sir.
Great idea! I’m going to make with the 2 cabinets and use an iPad Pro and mount a metal security iPad holder, mount a light to it, and use that! Thank you for making this video!
Thats a good idea. I was going to do that with mine as it makes it really portable ad lightweight. I didnt like how small the ipad was though so wound up using a 22" touch screen.
Is that a third party shock mount?
DraXgonProductions if you mean the mic, no it came with that. But if you’re referring to the black mount that couples the mic mount to the gimbel, I made it and explain how in the video.
Ely Miranda thanks for the reply. I’m referring to the mic. I looked up the same mic but the shock mount that I’m seeing that comes with the kit is a more traditional shock mount. The one in this video is something I’ve never seen before.
How did you mount the surface pro? I am curious to know since I am actually working with an 11" I Pad Pro.
Search for aluminum C-channel at your big box home store of choice ( www.homedepot.com/s/aluminum%2520c-channel?NCNI-5 ) . I think I used 1/2". I just cut it to the width of the tablet and epoxied it to the inside of the cabinet. The tablet sits in this channel. Then on the shelf behind it, I drilled a hole and inserted a set screw. This screw is tightened until it touches the back of the tablet with enough pressure to keep it in place.
Do you have any recommendations for any substitutions for the cabinets you purchased? I've been trying to locate for 2 hours now and can't seem to locate... Do you also have the information about the cabinets you purchased such as model # etc?
Sorry. I have no other info. I think Ikea may have discontinued the JOSEF.
Do you have the final demensions like height, width, depth? @@elymiranda6944
@@djjiik7922 Looks like it's still available in the UK... dimensions are in this listing... www.ikea.com/gb/en/products/storage-furniture/outdoor-organising/josef-cabinet-in-outdoor-white-art-50213141/
I found these IKEA Hallan cabinets which are comparable, and I'm planning to do my own version of this DIY using these ones. www.ikea.com/us/en/catalog/products/S89249403/ There are a few different sizes and configurations available for the Hallan cabinets so you can check out those different sizes and see what works best for you. I opted for the two longer ones that will be stacked like shown in the link.
@@washingtonreign Thank you!
Super nice!
Google want s to control each and every thing one can think off and we are happy to surrender.
Can you use any camera ?
This is totally custom, so you're free to use whatever you like. However, you'll need to make sure the camera is supported by whatever photobooth software you choose.
How did you mount the screen?
This is the best DIY photo booth on KZread. Great job dude!
This is the sleekest solution I've seen so far to having the mic + gimbal rig. Good job sir!
nice set up what cabinet is that from Ikea
Here's all the info on the build: kzread.info/dash/bejne/Ynicz8iioK2baZM.html
Great Set up! i was wondering if you could show more of how you mounted the monitor to the cabinet. I am just trying to visualized what you put in the description about the c-angle and set screw through the shelf behind it that keeps the monitor in place. Thanks! Good work :)
I'm not able to show anything further any time soon. The aluminum c-angle is like in the following link. It's cut to the width of the tablet and the tablet just sits in the channel. In the video at the 1:04 time marker, you see that the shelf holding the camera sits around the top of the tablet. On the front edge of the shelf I drilled a hole that a screw threads through (in the video the camera mount blocks the view of the screw). That screw is tightened just enough for it to touch the back of the tablet and securely hold the tablet in place. Hope this helps. store.buymetal.com/pub/media/catalog/product/cache/7bc4f2e1f0cd846db60d972d8f301a16/a/l/aluminum-channel_62.jpg
hi, what a great diy. i've buy the josef but how you cut out the monitor, lens & strobe. tq
Thanks. Please check out the answer to the same question in the pinned post above by Sunny636
Ely: thanks so much for this presentation! I have Alexa now but she's hard of hearing and displaying signs of narcolepsy and then amnesia when she wakes up.
This looks great but I would get rid of the bottom cabinet and get a speaker tri-pod to hold it up. Also put the printer in the same cabinet making it super lightweight and compact. Otherwise this setup isn’t bad at all. It all comes down to personal preference. Good work.
People tend to trip over tripod legs, which aren't very stylish, either. You'd have to cover them up with custom-made cloth or something. Then, there is statics to consider -- something heavy up high on something light might lead to people running into the setup and toppling it. With all the expensive tech inside that's probably a scenario we want to avoid. I've seen setups using tripods and I wasn't amazed; very wobbly.
Awesome! Thanks mate! Do you know where I can find a cabinet like this? Here in the USA, I don't see this cabinet on the IKEA website. Looking to make one for my wedding next month! Woot woot!
It looks like they are no longer stocking it. Will have to find another cabinet to modify.
m.ikea.com/us/en/catalog/products/art/30332116/
Found this one which is similar www.ikea.com/us/en/catalog/products/S89249403/
What did you use to put around the edges of the holes to give them a nice look?
@jenna p links to the trim are in the description
How can you find this cabinet, It is show in Ikea !
What height is the touch screen, camera, and light