I am thinking of getting me one used from 2008-2010 are they any good?
@bensanders73922 ай бұрын
Does it come with the sliding trolley on which the hoist attaches to? I'm just getting mine home, and I'm not seeing that part....as displayed in the store. Gonna suck if I have to go back and get one.
@EdwardTills2 ай бұрын
Doesn't look like the original engine, is this a rebuild of a rebuild?
@lelandhoag3983 ай бұрын
Well done bro, I work solo 90% of the time myself. I would have gone the same process, nice work 💪🏻
@jrisinlove3 ай бұрын
You the man!! Great job 🎉
@paulguy87794 ай бұрын
How did you support the engine when you pulled the subframe? I may need to do this job on a 2011 outback I recently purchased
@onyxwesson3207 күн бұрын
Engine support bar
@enitialdesignslimited64254 ай бұрын
Hoe wad that. Didnt see it come out. Doesnt effect anything in the engine?
@LarryFairfaxMudTrk4 ай бұрын
www.youtube.com/@LarryFairfaxMudTrk
@prnd21turbo5 ай бұрын
Ok I want one to help me take off the cab or bed on my shit box project truck. Plus it would be easier to swap the engine (according to my 13 grade education). But I keep thinking how the heck to you pick up the crane without a crane ? Boom - you solved it dude. Good thinking .
@MonsterJam-GraveDigger6 ай бұрын
I was there at the tunnel on top of it at show 1
@williambeatty51897 ай бұрын
This seems to be a problem in the northern climates where they use salt on the road. The good news is you can order a new Frame or pick one up at the salvage yard. Recommend you watch Southside Auto Repair for a quality instruction video.
@user-ym8pd9kj4k8 ай бұрын
You must be a young-un. That is not a First Gen 318, have you ever heard of a Poly 318, mid to late '50's to 1966. 😂
@d21motorsports228 ай бұрын
I have heard of the poly 318. I was referring to the ram as a first gen.
@hoozerob9 ай бұрын
This really worries me. They told me the same thing about 2011 legacy as well. I just spent a lot of money with the work along with the regular service and new tires they installed. Will ALL these legacy's end up like this? Also, what is an average cost of replacing all of this?
@handymanservices73002 ай бұрын
I have a 2010 legacy and the engine cradle is rusted out just like in this video......I live in the north east
@germanvazquez511510 ай бұрын
Una gran pregunta a que precio sale a eso parte para ponerlo
@joecrone986210 ай бұрын
Right on!
@nickwilliamson764910 ай бұрын
About to do mine for my 2010 legacy
@bikelifewithalex12011 ай бұрын
Man, Im on the same wavelength. I've been thinking of getting some land and living off the grid low-key with some toys to play with. Ever since 2019, a lot has changed. I bet more to come, well enjoy your 250. I was looking at the same-year color scheme on the market. Great looking bike and size. They don't make anything in this class cc anymore.
@d21motorsports2211 ай бұрын
Havent posted an update in a while but may be soon. Sold the house and hopefully building on the land soon.this 250 really surprised me, lots of fun in this small machine. I had a 350r in the past and wanted a 700r. Maybe one day but for now i love this thing.
@EdJanuskis Жыл бұрын
@D21 Motorsports i have similar problem with my 2011 Legacy. My question is how did you support the engine from top or bottom?
@mjo326 Жыл бұрын
Nice video - thank you! If I owned a Dodge, I'd probably be using it all the time.
@bltefft Жыл бұрын
Wow, when you set out to do something, you get it done.
@dobermanrage Жыл бұрын
Awesome job so far.. I’m starting a Carter Brothers grave digger myself this summer.. it’s ridiculously hard to find parts for this build. It seems like everything needs to be fabricated. The pick up truck in the grave digger is the exact same chassis, correct? Any tips and info would be greatly appreciate it. Thanks
@d21motorsports22 Жыл бұрын
Best bet is to join the facebook group pages, mini monster truck elite, mini monster “maniac” the group
@runngunrc1991 Жыл бұрын
You have a Raminator!!!
@d21motorsports22 Жыл бұрын
Yes i do. A lot done to it as well. Just bought the newest parts to fix the leaky v3 shocks.
@JT-bk1gp Жыл бұрын
Just curious where did you get the rim and tire package from ..Also great looking Raptor 👌 👍
@d21motorsports22 Жыл бұрын
Mayhem motorsports in CT. Found them on marketplace and they werent to far from me.
@BeheldSplash Жыл бұрын
What gun is that
@d21motorsports22 Жыл бұрын
Tacoma company
@dtr2058 Жыл бұрын
who was driving King Sling?
@frivolousracing3839 Жыл бұрын
Cliff Thomas aka stick
@mikerieck306 Жыл бұрын
My 2010 Legacy had holes in the front subframe you could put your hand through. Those subframes are garbage. The rear subframes aren't much better.
@d21motorsports22 Жыл бұрын
Luckily they are cheap and i was able to do the job.
@_ChuckRoast Жыл бұрын
That was pure genius! I need to get one of these and you just solved my build problem. I too wish I was there to help. Thank for the great video.
@d21motorsports22 Жыл бұрын
Buy the inside track membership and get it for less money.
@gmanplayz8031 Жыл бұрын
Same I was there too
@Lamborghini_6556 Жыл бұрын
I was there
@Yourfavyoutuber55675 Жыл бұрын
I was there
@sammitchell3657 Жыл бұрын
Don't even have ONE car stack. Wow. Smh. BKT tires really ruined everything.
@d21motorsports22 Жыл бұрын
For real. I stopped going to this show for a while but my girl has a little boy so i started going again so he can see a show live. Have to admit, this show was better than its been at this location in a long time.
@DjsOutdoorServices Жыл бұрын
How did you get the body ? Looking to do a truck body for my trophy kart
@d21motorsports22 Жыл бұрын
Guy on facebook was selling it.
@juanpablogs8699 Жыл бұрын
Saludos desde colombia esta genial tu raptor 250
@d21motorsports22 Жыл бұрын
Thanks
@Lamborghini_6556 Жыл бұрын
I was there I was one the side he did the backflip on and I was on the lowest part of that side.
@juanpablogs8699 Жыл бұрын
yamaha raptor 250 excellent machine to start with shares many things from its older sister yfz 450 great purchase brother
@d21motorsports22 Жыл бұрын
I had a 350r years ago, lots of fun. This 250 is just as much fun on a smaller wheel base which makes it easier to throw around.
@juanpablogs8699 Жыл бұрын
@@d21motorsports22 which is faster 250 or 350?
@kurtgross9160 Жыл бұрын
I was there
@bluu292 Жыл бұрын
Me to
@garybarry-gs7mw Жыл бұрын
That's bad@ss!
@d21motorsports22 Жыл бұрын
Weston has a lot of talent!
@Chewypicante Жыл бұрын
Backflip?more like El Toro Loco attempts a backflip
@d21motorsports22 Жыл бұрын
🤣
@ivariverson3256 Жыл бұрын
Half back flip,Damn! Hope the Driver is alright..
@d21motorsports22 Жыл бұрын
Hes good but the front clip was wrecked!
@matllebpmac3405 Жыл бұрын
Backflip fail!
@d21motorsports22 Жыл бұрын
Epic fail.
@buckpotter3184 Жыл бұрын
It's coming together
@d21motorsports22 Жыл бұрын
Working on the next video now. Welding on the belly pan and upgrading the sand blast cabinet
@buckpotter3184 Жыл бұрын
Not too bad
@d21motorsports22 Жыл бұрын
Slow build but its getting there.
@buckpotter3184 Жыл бұрын
Yeah bro I love this video thumbs up homie
@d21motorsports22 Жыл бұрын
Thanks bro, i should have another monster truck video later in the year. Going to world finals in Nashville.
@TheJmbrewer Жыл бұрын
I have the fine design set up with 12s I pulled the clutch springs off and I have instant forward and reverse and braking without the servos, I just had to pull the clutch springs off
@d21motorsports22 Жыл бұрын
Seems to be what everyone is doing now. I didnt know about that before buying the jcr kit. Atleast im selling the fine designs kit for the same price as jcr so im braking even. I do like the jcr kit better tho.
@barneywarwick9804 Жыл бұрын
is the 318 a tuff motor mine is a 92
@d21motorsports22 Жыл бұрын
It is as long as you dont bore it out too much and make the cylinder walls too thin.
@1080sucks Жыл бұрын
I rekon. They are known for doing big miles in stock form. Basically just a small bore 340. Its all I mess with as here in NZ they are cheapish & plentiful. Dont go to crazy & they last.
@DestructionDan Жыл бұрын
That looked pretty easy considering how much rot was on it.
@d21motorsports22 Жыл бұрын
Ya wasnt bad at all
@elite718 Жыл бұрын
Can you tell me the tire sizes. I see you are using GBC XC Masters
@d21motorsports22 Жыл бұрын
21x7-10 for front and 20x11-9 rear.
@Slick_Z95 Жыл бұрын
what size rims are you using?
@nothingbutnetoutdoors Жыл бұрын
this is great! I had one of these as a kid and remember crashing it bad and taking it apart that winter in my moms basement not knowing what the hell I was doing lol but I did fix it!
@d21motorsports22 Жыл бұрын
Nice. I have to get back into this. The garage is packed with projects. Plenty to do over the winter.
@Gregorius4 Жыл бұрын
I live in CT too. I wish I found those karts first lol. One day if I'm lucky. I'd like to make a Wrangler for my nephew.
@d21motorsports22 Жыл бұрын
All but 1 of the bodies came from out of state. Lots of traveling and shipping to get stuff. Join the mini monster truck elite page on fb, plenty of karts for sale.
@coolmind781 Жыл бұрын
men you got it put together nice bro wish i would have been there to help i would have. Nice
Пікірлер
I am thinking of getting me one used from 2008-2010 are they any good?
Does it come with the sliding trolley on which the hoist attaches to? I'm just getting mine home, and I'm not seeing that part....as displayed in the store. Gonna suck if I have to go back and get one.
Doesn't look like the original engine, is this a rebuild of a rebuild?
Well done bro, I work solo 90% of the time myself. I would have gone the same process, nice work 💪🏻
You the man!! Great job 🎉
How did you support the engine when you pulled the subframe? I may need to do this job on a 2011 outback I recently purchased
Engine support bar
Hoe wad that. Didnt see it come out. Doesnt effect anything in the engine?
www.youtube.com/@LarryFairfaxMudTrk
Ok I want one to help me take off the cab or bed on my shit box project truck. Plus it would be easier to swap the engine (according to my 13 grade education). But I keep thinking how the heck to you pick up the crane without a crane ? Boom - you solved it dude. Good thinking .
I was there at the tunnel on top of it at show 1
This seems to be a problem in the northern climates where they use salt on the road. The good news is you can order a new Frame or pick one up at the salvage yard. Recommend you watch Southside Auto Repair for a quality instruction video.
You must be a young-un. That is not a First Gen 318, have you ever heard of a Poly 318, mid to late '50's to 1966. 😂
I have heard of the poly 318. I was referring to the ram as a first gen.
This really worries me. They told me the same thing about 2011 legacy as well. I just spent a lot of money with the work along with the regular service and new tires they installed. Will ALL these legacy's end up like this? Also, what is an average cost of replacing all of this?
I have a 2010 legacy and the engine cradle is rusted out just like in this video......I live in the north east
Una gran pregunta a que precio sale a eso parte para ponerlo
Right on!
About to do mine for my 2010 legacy
Man, Im on the same wavelength. I've been thinking of getting some land and living off the grid low-key with some toys to play with. Ever since 2019, a lot has changed. I bet more to come, well enjoy your 250. I was looking at the same-year color scheme on the market. Great looking bike and size. They don't make anything in this class cc anymore.
Havent posted an update in a while but may be soon. Sold the house and hopefully building on the land soon.this 250 really surprised me, lots of fun in this small machine. I had a 350r in the past and wanted a 700r. Maybe one day but for now i love this thing.
@D21 Motorsports i have similar problem with my 2011 Legacy. My question is how did you support the engine from top or bottom?
Nice video - thank you! If I owned a Dodge, I'd probably be using it all the time.
Wow, when you set out to do something, you get it done.
Awesome job so far.. I’m starting a Carter Brothers grave digger myself this summer.. it’s ridiculously hard to find parts for this build. It seems like everything needs to be fabricated. The pick up truck in the grave digger is the exact same chassis, correct? Any tips and info would be greatly appreciate it. Thanks
Best bet is to join the facebook group pages, mini monster truck elite, mini monster “maniac” the group
You have a Raminator!!!
Yes i do. A lot done to it as well. Just bought the newest parts to fix the leaky v3 shocks.
Just curious where did you get the rim and tire package from ..Also great looking Raptor 👌 👍
Mayhem motorsports in CT. Found them on marketplace and they werent to far from me.
What gun is that
Tacoma company
who was driving King Sling?
Cliff Thomas aka stick
My 2010 Legacy had holes in the front subframe you could put your hand through. Those subframes are garbage. The rear subframes aren't much better.
Luckily they are cheap and i was able to do the job.
That was pure genius! I need to get one of these and you just solved my build problem. I too wish I was there to help. Thank for the great video.
Buy the inside track membership and get it for less money.
Same I was there too
I was there
I was there
Don't even have ONE car stack. Wow. Smh. BKT tires really ruined everything.
For real. I stopped going to this show for a while but my girl has a little boy so i started going again so he can see a show live. Have to admit, this show was better than its been at this location in a long time.
How did you get the body ? Looking to do a truck body for my trophy kart
Guy on facebook was selling it.
Saludos desde colombia esta genial tu raptor 250
Thanks
I was there I was one the side he did the backflip on and I was on the lowest part of that side.
yamaha raptor 250 excellent machine to start with shares many things from its older sister yfz 450 great purchase brother
I had a 350r years ago, lots of fun. This 250 is just as much fun on a smaller wheel base which makes it easier to throw around.
@@d21motorsports22 which is faster 250 or 350?
I was there
Me to
That's bad@ss!
Weston has a lot of talent!
Backflip?more like El Toro Loco attempts a backflip
🤣
Half back flip,Damn! Hope the Driver is alright..
Hes good but the front clip was wrecked!
Backflip fail!
Epic fail.
It's coming together
Working on the next video now. Welding on the belly pan and upgrading the sand blast cabinet
Not too bad
Slow build but its getting there.
Yeah bro I love this video thumbs up homie
Thanks bro, i should have another monster truck video later in the year. Going to world finals in Nashville.
I have the fine design set up with 12s I pulled the clutch springs off and I have instant forward and reverse and braking without the servos, I just had to pull the clutch springs off
Seems to be what everyone is doing now. I didnt know about that before buying the jcr kit. Atleast im selling the fine designs kit for the same price as jcr so im braking even. I do like the jcr kit better tho.
is the 318 a tuff motor mine is a 92
It is as long as you dont bore it out too much and make the cylinder walls too thin.
I rekon. They are known for doing big miles in stock form. Basically just a small bore 340. Its all I mess with as here in NZ they are cheapish & plentiful. Dont go to crazy & they last.
That looked pretty easy considering how much rot was on it.
Ya wasnt bad at all
Can you tell me the tire sizes. I see you are using GBC XC Masters
21x7-10 for front and 20x11-9 rear.
what size rims are you using?
this is great! I had one of these as a kid and remember crashing it bad and taking it apart that winter in my moms basement not knowing what the hell I was doing lol but I did fix it!
Nice. I have to get back into this. The garage is packed with projects. Plenty to do over the winter.
I live in CT too. I wish I found those karts first lol. One day if I'm lucky. I'd like to make a Wrangler for my nephew.
All but 1 of the bodies came from out of state. Lots of traveling and shipping to get stuff. Join the mini monster truck elite page on fb, plenty of karts for sale.
men you got it put together nice bro wish i would have been there to help i would have. Nice
Thanks 👍