Пікірлер

• 
  @Laura_Parenti8 күн бұрын

  Great video! Just a head's up, I think it should be "Incentive Spirometer," not "Insecntive Spriometer" in the title :)

• 
  @estherthebelove22 күн бұрын

  Very detailed explanation

• 
  @janw1404Ай бұрын

  Shouldn’t you use a valved mask?

• 
  @alwinharefa57212 ай бұрын

  good afternoon sir.. please allow the instructions. I have a problem with the Bennet 840, the compressor load test failed

• 
  @alwinharefa57212 ай бұрын

  Selamat siang pak izin saya bertanya kalau kompressor load test failed

• 
  @amalowd96814 ай бұрын

  Hey, Dr king I heard so much about you and you taught some of my friends. They told me how much you are knowledgeable and they are a great RTS because of you! I am reaching out and asking for help, would you please tutor me? Please Let me know if you have time I tried to find your email but I couldn't. Thank you in advanced and I hope you see my comments.

• 
  @nickmurphy39355 ай бұрын

  How do I get into diagnostics mode to calibrate the touchscreen?

• 
  @WesAntilles6 ай бұрын

  We are getting an error message stating a patient file is locked and we need to return the system to the main menu to unlock it. Have you ever seen this?

• 
  @anthony.m.lamotta23376 ай бұрын

  What is the wave water icon above the check mark and to the right with a line through it? What does it mean when it blinks ?

• 
  @yesdavidyes37778 ай бұрын

  This helped a lot we just received these vents !

• 
  @crystalfiore92058 ай бұрын

  Thank you!!!!

• 
  @lindabackham79378 ай бұрын

  Is your LIP not supposed to be higher than your EPAP?

• 
  @user-li2gw1zm9g8 ай бұрын

  I am a Respiratory therapy student I would like to thank you so much for the informative video, please make more for all the other RT devices thank you

• 
  @arfh30059 ай бұрын

  how to clear the low rate alarm?

• 
  @wakelesswander9 ай бұрын

  Is there a difference if the maximum Inhalation to maximum exhale comes before the panting ??

• 
  @estherthebelove9 ай бұрын

  Please do more videos you are an excellent educator

• 
  @estherthebelove9 ай бұрын

  Very informative. Thanks

• 
  @thanhtang354510 ай бұрын

  Thank you very much, more confident after watching 👍

• 
  @CharlesLing11 ай бұрын

  5:01 🎉 good video on DLCO 1:47 don’t suck in too fast or blow out too hard, it can give false readings

• 
  @turkeytrotproductions458211 ай бұрын

  Whats the magic box?

• 
  @aliibrahem369111 ай бұрын

  Thank you for the good work sir 👍

• 
  @jcyril697211 ай бұрын

  You sound like Dr. Todd from Hopkins Bayview

• 
  @kshamtaagrawal6352 Жыл бұрын

  This was a really wonderful explanation 😊 can't thank you enough!! May God bless you 😊

• 
  @normansteel7080 Жыл бұрын

  The profile information is incorrect, backwards actually. The correct statement is the smaller the patient the lower the profile. Example:Infants profile 1 vs adult profile 9. See manual

• 
  @KhorasanHx Жыл бұрын

  Good

• 
  @jedparian3566 Жыл бұрын

  Good day sir, what will i do if pb 840 ventilator error system have been locked out, system error.?

• 
  @trauma_nurse574 Жыл бұрын

  Not so much information and tutorial .. ur just teaching how to press and touch and bom the buttons .. bad teaching

• 
  @askes-hz8rp Жыл бұрын

  Can we serve nebulizer via this machine? Any setting there

• 
  @ventilator98 Жыл бұрын

  As a patient who knows about the Spontaneous Breathing Trial option, I'm a long term ventilator dependent, and I use the SBT function to set the ventilator to CPAP/PS for a few minutes. It has a timer obviously, so It'll go back to assist control after the time has Elapsed. It gives me a chance to breathe on my own with high Pressure Support for a few minutes. I know the Respiratory Field very well. VERY VERY well, and so I know how to use this option. It is a WONDERFUL option that most home care patients have no idea, but I know what an SBT is, so I use it to do short trials off the ventilator.

• 
  @vanessavicieremartinez8799 Жыл бұрын

  Can you do the RA calibration only on the HFNC, Or you have to do both before putting a patient on it?

• 
  @santaclause3487 Жыл бұрын

  Worst part about this vent is when u go from PSV to another mode and back to psv, no matter how quick it resets PS to 0, even tho it’s same pt

• 
  @santaclause3487 Жыл бұрын

  That alarm makes me want to barf

• 
  @Omni-Owl Жыл бұрын

  I was really hoping that you were going to turn some oxygen on... My father just got one of these and it is deafeningly loud! I wanted to see one working to compare if that's normal or this thing is just busted.

• 
  @rachelalayon20383 ай бұрын

  I have one. It is loud.

• 
  @pauletxfish4976 Жыл бұрын

  basic but acceptable, your correct about he Mrk 8 but failed to explain the "why" for the "negative pressure control" thats why the pressure manometer had a -40 ! Only the Mrk 8.

• 
  @rhonrocktv7895 Жыл бұрын

  How long does 340ml last? 2lpm is set?

• 
  @sinclair657 Жыл бұрын

  Thank you

• 
  @sinclair657 Жыл бұрын

  Thank you so much well demonstrated

• 
  @sinclair657 Жыл бұрын

  Excellent thank you

• 
  @VISHALVERMA-ez7vf Жыл бұрын

  Thanks

• 
  @VISHALVERMA-ez7vf Жыл бұрын

  Thanks boss

• 
  @nigel5009 Жыл бұрын

  What do you do if you don't see a mist coming through prior to putting the mask on the patient? This has happened to me. The connections are good, and I've increase the flow but I don't see a mist.

• 
  @louwich8277 Жыл бұрын

  Hello, One of our Dräger C500 vents will not pass Pressure sensor calibration valve and Expiratory valve tests. We believe this problem developed from using some sticky nebulizer treatments on a sick patient. We've tried replacing the expiratory valve and flow sensor three different times with no luck. Do you have any advice on how to get it to pass? Thanks.

• 
  @ChargerInc Жыл бұрын

  I appreciate this video thank you for clearing up I-time in noninvasive ventilation. However, I observe that your volume curve fell off a lot quicker when you reduced the I-time. I was wondering, wouldn’t it be good to leave the I-time at .8 sec. or higher since the little delay in time, which you called breath holding, allows for better alveolar/capillary gas exchange?

• 
  @anapatriciag8510 Жыл бұрын

  Great review!! Love the IPPB -I also would love to see a review on the PB-PR 2 Bennett Model- old school - for NEW students 😂

• 
  @anapatriciag8510 Жыл бұрын

  Great video and explanation-Just a quick observation - I’m very picky with body posture- leg 🦵 position both feet on the floor slightly separated- body straight, and an even level of the chin in relation to the mouthpiece. It helps with chest movement and chest hold- 🥰

• 
  @giftyraju1672 Жыл бұрын

  If there are patients on Venturi masks (eg: 35 percent at 8 l/m),which connector should I use for nebulisation ?

• 
  @sinclair657 Жыл бұрын

  Thank you

• 
  @greensahuaro2834 Жыл бұрын

  Rise time was invented for further manipulation of the I Time due to abnormal lung anatomy like severe COPD, or RLD. or someone with Keto acidosis/airhunger. To meet the inspiration deman and to ventilate to have good IE ratios.

• 
  @lindseeziegler90 Жыл бұрын

  Thanks!

• 
  @ldbuet Жыл бұрын

  Where do we find total blower hours?

• 
  @amdistant5547 Жыл бұрын

  Don't think the LTV has blower hours.