Пікірлер

• 
  @Lonewolf-gr2nh4 күн бұрын

  Thank from Florida USA

• 
  @MJJCvideo4 күн бұрын

  Thanks so much dear

• 
  @masihpemuladiduniadetailin790513 күн бұрын

  hello. sorry to ask, but what are the reason we have to replace the air valve? is it because the foam lance not foaming properly even it have been cleaned properly & filter have been replaced?

• 
  @MJJCvideo13 күн бұрын

  Dear,thanks for your question,will reply to you asap today☺

• 
  @masihpemuladiduniadetailin790512 күн бұрын

  @@MJJCvideo still waiting....

• 
  @MJJCvideo12 күн бұрын

  @@masihpemuladiduniadetailin7905 Dear,sorry,really too busy,per my boss,usually it is because the valve is accidentally broken so that it needs to be replaced.If it's not broken,there is no need to replace it.Thanks so much in advance!

• 
  @vtec7016 күн бұрын

  Hi, my MJJC foam cannon have this issue, where can i have it change in Singapore?

• 
  @MJJCvideo15 күн бұрын

  Dear,you can check our website about the detailer in Singapore,thanks so much in advance!

• 
  @PJvaleting24 күн бұрын

  Think I may need to update my cannons been looking at yours for while now and will be starting product reviews on my channel shortly, when I purchase one hope you don’t mind me reviewing it 😊

• 
  @MJJCvideo24 күн бұрын

  Ok dear

• 
  @bansheeboy12Ай бұрын

  I just got a pressure washer today. I’d love to do a review of your foam cannon!

• 
  @MJJCvideoАй бұрын

  Dear,highly appreciated that you choose our products,but we currently only provide products to content creator who frequently update car washing videos,thanks in advance!

• 
  @nicolasdube96802 ай бұрын

  Where do you find this adapter???

• 
  @MJJCvideo2 ай бұрын

  Dear,you want to buy the adapter,right?

• 
  @aliamini5262 ай бұрын

  Does it work well with a 1.25 nozzle with a 180 bar pressure device?

• 
  @MJJCvideo2 ай бұрын

  Dear,will reply to you tmr

• 
  @aliamini5262 ай бұрын

  Hello, is this model suitable for a 180 bar pressure device with the nozzles it has, or should I get the 1.35 nozzle separately?

• 
  @MJJCvideo2 ай бұрын

  Dear,will reply to you tmr,thanks in advance!

• 
  @sensationlive35282 ай бұрын

  An ad was really necessary for this? Buying the product wasn’t enough?

• 
  @returnyt98482 ай бұрын

  Very nice thick foam. I would love to review this on my Tiktock channel🥳

• 
  @MJJCvideo2 ай бұрын

  Welcome to contact with us dear

• 
  @drunkenspacebar3 ай бұрын

  I purchased a ProV2.0 over in the UK, but when it arrived its green and has different branding on it... They say you manufacture it for them? Is this true? (Auto Rae Chem Ltd)

• 
  @MJJCvideo3 ай бұрын

  We will reply to you,thanks so much!

• 
  @guccitv81453 ай бұрын

  think I have my adapter stuck on and can't remove. any easy fixes? only had it a week

• 
  @nitrokyosho4 ай бұрын

  kzread.info/dash/bejne/oaeq0KealtrKh8Y.html

• 
  @thepiecesfit50495 ай бұрын

  What GPM is recommended for best foam?

• 
  @MJJCvideo5 ай бұрын

  MJJC foam cannon can make good foam with most electric pressure washers,only if it's not battery pressure washers.

• 
  @a2zcarservice5 ай бұрын

  its nice and easy to use

• 
  @car-glossdetailing96186 ай бұрын

  Great

• 
  @MJJCvideo6 ай бұрын

  😊

• 
  @mehmetaliyilmaz48866 ай бұрын

  Hello MJJC. I am a student and I enjoy trying different apparatus for car washing. I wanted to buy this apparatus as well, but you will appreciate that I am a student, so I cannot order it at that price. Could you please send me a free Foam Lance to try? I have no doubt that you will understand me. I have already seen its quality by watching your videos. Thanks a lot...

• 
  @MJJCvideo6 ай бұрын

  Dear,highly appreciated that you love our products,but we currently only provide products to content creator who frequently update car washing videos,thanks in advance!

• 
  @mehmetaliyilmaz48866 ай бұрын

  @@MJJCvideo If you want to send it, I'm here

• 
  @mehmetaliyilmaz48863 ай бұрын

  @@MJJCvideo Hello MJJC. I bought a foam lance called Stone Banks, but I could not get the results I wanted. I shared it on KZread, if you send me a video of it, I would like to try it, compare it and share it.kzread.infowrcsm2_X70M?feature=share

• 
  @Redawesomeoby6 ай бұрын

  the only good thing to come out of china in the past 3 years

• 
  @ShaksWD7 ай бұрын

  Looks great! I enjoyed using your v3.0 s foam cannon 😊

• 
  @MJJCvideo7 ай бұрын

  Thanks so much dear😆

• 
  @basslinefreshdetailing7 ай бұрын

  You subscribed to me years ago but now I don't see you in my Sub list :( it was such a big inspiration for my small channel

• 
  @MJJCvideo7 ай бұрын

  Dear,have subscribed,pls kindly note with many thanks!

• 
  @Antonio-yc2kx8 ай бұрын

  'promo sm'

• 
  @Nojail1018 ай бұрын

  What did she do at the end of video ? I know she switched the orfice but what did she do right after that ? I have 2 of these already but both mine the foam comes out thick BUT I can only set the steam to one way cause if I try to adjust it any other way it shoots out randomly and not perfect like you see in videos. Both mine do it and they are brand new. I put the smaller orfice in both I haven’t tried the bigger orfice because didn’t think I needed it because I have the craftsman 40 volt brushless pw ! It’s a battery powered but it’s 1500 psi & 1.2 gpm. What do you think is wrong ? And what did she do to foam cannon at end of video ?

• 
  @MJJCvideo8 ай бұрын

  Sorry for late reply, we will reply to you today

• 
  @MJJCvideo8 ай бұрын

  Dear,would you pls take a video to our email to check it for you correctly? Thanks in advance!🤝

• 
  @Nojail1018 ай бұрын

  @@MJJCvideo what’s your email ?

• 
  @MJJCvideo8 ай бұрын

  I am not able to leave it here, it's at my page dear, would you pls look for it?Thanks in advance!@@Nojail101

• 
  @MJJCvideo8 ай бұрын

  It's in the "about"at my page,have you got it?Thanks in advance!@@Nojail101

• 
  @ahmeddetail2O208 ай бұрын

  CAN’T WAIT TO TRY THIS FOAM CANNON

• 
  @MJJCvideo8 ай бұрын

  Have done it, would you pls check yours?😄

• 
  @ahmeddetail2O208 ай бұрын

  @@MJJCvideo I haven't ordered it yet, I'm thinking of doing so soon

• 
  @MJJCvideo8 ай бұрын

  Welcome to us🤗@@ahmeddetail2O20

• 
  @TheCrazyGarage8 ай бұрын

  Looks good guy’s 👍

• 
  @MJJCvideo8 ай бұрын

  Will contact tmr,thanks in advance and keep in touch!

• 
  @TheCrazyGarage8 ай бұрын

  Will do guys got a link ?

• 
  @colinmeredith71148 ай бұрын

  Yeah right and what woman woudn't be dressed like that to foam a car..?? Come-On, get real!! v2 pro is better!!!

• 
  @MJJCvideo8 ай бұрын

  It is an advertisement video. 😄

• 
  @Chris_mk78 ай бұрын

  Really nice product! I have tag you on my review video!

• 
  @MJJCvideo8 ай бұрын

  Thank you. 😄

• 
  @WesternDriven4069 ай бұрын

  My MJJC cap has this issue and keeps coming off while trying to use.

• 
  @MJJCvideo9 ай бұрын

  Dear,we will reply to you next Monday

• 
  @MJJCvideo9 ай бұрын

  Dear,would you pls contact us if need, thanks in advance!

• 
  @atacancoban919310 ай бұрын

  Is this product suitable for Bosch aqutak 135 bar ?

• 
  @MJJCvideo10 ай бұрын

  Yes,SKU: NBDFLSV3 is suitable for you

• 
  @mehmetaliyilmaz488611 ай бұрын

  Hello.Have a nice day.There are no distributors selling their products here.I would like to introduce your MJJCFoam Cannon Pro product on my new KZread channel, because it looks very high quality.Could you help me, please?

• 
  @MJJCvideo9 ай бұрын

  Dear,you can purchase it at our website with our coupon code.

• 
  @36trisix4811 ай бұрын

  Hi MJJC’s team, I’m one’s of million fans of your Pro V2.0 foam cannon. Just started using it over a year ago and still love it till today. But, as the V3.0 has been released (never try it till today), it seem got an improvement over Pro V2.0. That is TRANSPARENT bottle. It makes sense that user can see clearly their solution, if somehow got forgotten what chemical is inside the bottle with an clear view of the solvent based on actuall color. Pro V2.0 for me however got an best standing position beside the V3.0 but lack of clear view inside the bottle. My request is could you optioned an transparent bottle exclusively for Pro V2.0? This will be greatly appreciated if you do so. Thanks, Humble Regards

• 
  @MJJCvideo11 ай бұрын

  Hi,really appreciated for your good feedback, I will report this to my boss,would you pls tell me the email? Thanks in advance!

• 
  @rayoscroft3775 Жыл бұрын

  That was a waste of time 😂

• 
  @MJJCvideo Жыл бұрын

  If you are using the correct adapter, it is only the rubber o ring needs to be replaced.

• 
  @ShadleyPetersen Жыл бұрын

  Will removing the water bottle and running the cannon without form like you did help with cleaning any product out of it when finish using it?

• 
  @MJJCvideo Жыл бұрын

  Thanks for your question, will reply to you asap, thanks in advance!

• 
  @MJJCvideo Жыл бұрын

  Yes

• 
  @MrGymCrazy Жыл бұрын

  In normal use (with the cannon in the vertical position), should the red bungs be in or out of the top? Does it affect the mix/foam with or without the plugs? 🤔

• 
  @MJJCvideo Жыл бұрын

  The red plugs are supposed to stay in. However, it does not affect the mix/foam with or without the plugs.

• 
  @topvideoslist Жыл бұрын

  When change the Orifice has to change the filter too?

• 
  @MJJCvideo Жыл бұрын

  Hello,thanks for your quesioon,will reply to you asap

• 
  @topvideoslist Жыл бұрын

  @@MJJCvideo ok

• 
  @MJJCvideo Жыл бұрын

  No, that's not essential.

• 
  @topvideoslist Жыл бұрын

  @@MJJCvideo Ok because i saw people replacing the filter

• 
  @MJJCvideo Жыл бұрын

  @@topvideoslist Yes, when the mesh filter is clogged, you will need to replace it.

• 
  @girldad_outnumbered Жыл бұрын

  Is there a rubber gasket ring between the top of the bottle and the black cap, creating a seal? Mine started not making thick foam and I replaced the mesh filter, cleaned the ball and tube and still runny foam. I don't see a gasket between the top of the bottle and cap but can't remember if there ever was one. When I screw the bottle on it's just plastic against plastic when it's tightened up. Is that right? I feel like it's not an air tight seal without a rubber gasket. I swear I've seen one in videos. It's thin and white-ish, almost clear. Can anybody look at theirs and verify?

• 
  @MJJCvideo Жыл бұрын

  Hello,thanks for your question, will reply to you today asap🤝

• 
  @MJJCvideo Жыл бұрын

  Hi, if the weighted ball is cleaned and not clogged, and you have replaced the mesh filter, still no good foam. Please take out the mesh filters and put them back one by one and use a pen to press the mesh filters to make sure they are placed properly and evenly. Please do not over press the mesh filters.

• 
  @DaKuy Жыл бұрын

  Can you use it with a garden hose

• 
  @MJJCvideo Жыл бұрын

  No, foam cannon works with a pressure washer only.

• 
  @brokenSnake Жыл бұрын

  My foam cannon has stopped producing thick foam. When i used the adjuster knob and turn it all the way clockwise, it pushes out runny soapy water. When i twist it anti-clockwise a bit, then it starts producing foam again but not very thick. I have performed all steps to clean the steel ball, the mesh was replaced. Did everything but it still doesnt work.

• 
  @MJJCvideo Жыл бұрын

  I think you need to replace the mesh filter with a new one. The mesh filter is mostly clogged with chemical residuals, it cannot be cleaned out.

• 
  @girldad_outnumbered Жыл бұрын

  I'm having the same issue. Does yours have a rubber gasket between the bottle and cap when twisted together? Mine doesn't and I swear there was one when I bought it. I think it may have fallen out at some point. Now it's just plastic on plastic when screwed together and now air can get in diminishing the foaming action. I've done all the steps like you with no real improvement. Maybe it's something else but until someone can verify if there is a rubber gasket between cap and bottle that's all I can think it could be.

• 
  @MJJCvideo Жыл бұрын

  @@girldad_outnumbered Thanks for your question, will reply to you asap, thanks in advance!

• 
  @MJJCvideo Жыл бұрын

  @@girldad_outnumbered Yes, there is supposed to be a rubber gasket between the bottle and cap. However, the foam cannon would still work fine without the gasket if you don't turn it upside down.

• 
  @lmSteveo Жыл бұрын

  Does the mesh go bad? I seen some mesh’s with different weight. What’s the difference?

• 
  @MJJCvideo Жыл бұрын

  there is difference. but as long as the foam cannon works well, no need to replace it.

• 
  @DJJCBahena Жыл бұрын

  What size the ring/seas has to be? Mine is doing that!

• 
  @MJJCvideo Жыл бұрын

  It is 15x2.4mm outer diameter: 15mm thickness: 2.4mm

• 
  @Moolaz Жыл бұрын

  If only it was that easy to loosen the bolt. Good video though.

• 
  @MJJCvideo Жыл бұрын

  yes, sometimes, it might be harder to loosen that bolt. 😅

• 
  @shamieghbehardien2710 Жыл бұрын

  Had the v1 and the nozzle leaked, then I got the v2 also leaked after a week of use. What is the issue and what did you put in there

• 
  @MJJCvideo Жыл бұрын

  do you mean the trigger gun V1 and V2?

• 
  @shamieghbehardien2710 Жыл бұрын

  @@MJJCvideo both quick connectors have issues. I have changed the v2 now by the surplier . Hope this one don’t give in. Will let use know if I have issues again.

• 
  @MJJCvideo Жыл бұрын

  @@shamieghbehardien2710 sure, please keep me updated.

• 
  @FarhanAli-dq8eh Жыл бұрын

  Looks like they put in an o-ring

• 
  @shamieghbehardien2710 Жыл бұрын

  Yes it’s a oring issue with these devises. Same like Rlf he foam cannon has issues.

• 
  @MarcoPereiraFerramenta-Online Жыл бұрын

  I leave here a video with a comparison : kzread.info/dash/bejne/pYeftLuQoJexhdI.html

• 
  @MJJCvideo Жыл бұрын

  Thanks Marco so much for the support.@Marco Pereira

• 
  @ShaksWD Жыл бұрын

  This looks really good! I’d love to get one for my channel 😊

• 
  @MJJCvideo Жыл бұрын

  Thank you for the comment. I will contact you via Instagram.@Sharks

• 
  @the_jnlt_channel Жыл бұрын

  Very nice foam cannon and great video 👍

• 
  @MJJCvideo Жыл бұрын

  Thank you@JNLT Detailing Channel

• 
  @the_jnlt_channel Жыл бұрын

  @@MJJCvideo no worries 😊 need to get one of them on my channel at some point to try out and review. Definitely looks like a great piece of kit 👍

• 
  @MJJCvideo Жыл бұрын

  @@the_jnlt_channel Thank you so much for the information. We would love to send it to you to test out and review.

• 
  @jeraldferrer1876 Жыл бұрын

  PWEDE BA YAN SA KAWASAKI MOTOR NA 1.5 HP?

• 
  @MJJCvideo Жыл бұрын

  Yes, if you have the correct connection to fit your trigger gun.

• 
  @KygoClassifieds Жыл бұрын

  Nice video! Liked and subscribed to your channel🙂

• 
  @MJJCvideo Жыл бұрын

  @Boss Thank you.

• 
  @agroserviciosdelsur9178 Жыл бұрын

  Estoy empezando con el detailing y vengó viendo está foam en todos lados ...y estoy enamorado...ojalá puediera conseguirla acá en Argentina y empezaría a hacer videos... jajaja los felicito...

• 
  @JORGE-xw4og Жыл бұрын

  Pena que vem só com 1 reservatório

• 
  @user-wh1nj5hi5l Жыл бұрын

  I saw many videos on MJJC foam gun and I would like to try it 🥺

• 
  @mlabvn Жыл бұрын

  Hello. How to replace an oring without scratching the black plastic cap ? .