Пікірлер

• 
  @temesgentaresa41 минут бұрын

  ❤kit😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😢😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊iisa

• 
  @nastynate42059 сағат бұрын

  Thank you so much for the video this will help me a lot with my 2001 model 🙏

• 
  @abbasghareghani445914 сағат бұрын

  Price???????

• 
  @gdrew417115 сағат бұрын

  Thank you. I feel confident about tackling changing the plugs in my 2015 MKS. I have had it for 4 years now only changed oil every 4 months or so. Ive heard horror stories about Fords/Lincolns spark plug change.

• 
  @bradleyscruggs457622 сағат бұрын

  Great video

• 
  @mike.v5252Күн бұрын

  give you gun 🔫

• 
  @mike.v5252Күн бұрын

  give me your gun 🔫

• 
  @juan1518Күн бұрын

  Hello, do you know why the truck kicks when the gear is in park then you go into reverse?

• 
  @g76312459777865m2 күн бұрын

  thank you!

• 
  @HammerWrench2 күн бұрын

  Bro! That brake line cut hack was golden! Don’t even have to bleed the brakes now! Love the hat and the shout out! You taught me something today! 🛠️

• 
  @luckysdiygarage2 күн бұрын

  Haha an old tech taught me that 8 years ago ..

• 
  @venomhades82532 күн бұрын

  i knew it was a twist lock but dam it wasn’t turning

• 
  @grndhg86d3 күн бұрын

  No castor? No camber?

• 
  @jayephbee3 күн бұрын

  I wish, I got a bracket, a speaker & some other BS. Thanks away

• 
  @sikebro47263 күн бұрын

  Can this be used as a guide for replacing the actuator on a 2019 pathfinder? I can’t seem to find any videos online for that model 2019 pathfinder SV

• 
  @forerunner12463 күн бұрын

  Thanks 🙏

• 
  @davidstewart714 күн бұрын

  Very good video! Thank you!

• 
  @blairkivey5 күн бұрын

  Everything you need; nothing you don't. A model for others to follow.

• 
  @deborahmercado84555 күн бұрын

  I just wanted to say thank you so much on how to do this. Very good video and straight to the point☺️😁I replaced my blower motor because I was going through that same scenario.

• 
  @luckysdiygarage5 күн бұрын

  @deborahmercado8455 Thank you so much for the support 😀 I'm glad it helped 😊

• 
  @HammerWrench5 күн бұрын

  Seeing the trust you had in that flip flop to slow you down, bruh!! I’d be doing the knee ride like the kids for sure! 🛠️

• 
  @luckysdiygarage5 күн бұрын

  Haha I was worried the sandles wear gonna fly off haha 😄..

• 
  @lvl5charmander6 күн бұрын

  wish i had a fam like this 😅

• 
  @luckysdiygarage6 күн бұрын

  What's up, guys!! My kids are getting into skateboarding, so I decided to custom build a skateboard and get back into skating so I can ride with my boys!! This was the craziest thing I've done since the motorcycle accident

• 
  @xiangliu70896 күн бұрын

  Exactly what I’m looking for! This help me out a lot thanks!

• 
  @zucan1006 күн бұрын

  Great video, I am looking to do this on my 2019 xdrive25i. Did you need an OBDB2 tool to reset anything with the ECU? Also is their a sensor cable on each wheel?

• 
  @luckysdiygarage5 күн бұрын

  @zucan100 What's up boss no I did the reset on the car. Here's the link kzread.info/dash/bejne/Z5mDqqRxpKrQmLw.htmlsi=eDziGmMnmTTwPto4. And I believe there's one sensor for the front and two in the rear ..it's Ben awhile, haha 😄

• 
  @whatsitmatter6728 күн бұрын

  Raise the van, there's the starter? One question---where's the starter? Been a long time since I worked on a van.

• 
  @luckysdiygarage5 күн бұрын

  @whatsitmatter672 the starter is on the passenger side, boss

• 
  @whatsitmatter6725 күн бұрын

  @@luckysdiygarage Thanks

• 
  @SRsizz8 күн бұрын

  Wrong

• 
  @kolkam109r8 күн бұрын

  I love your video it's quick and to the point none of that extra stuff that makes me fast forward the video thank you

• 
  @luckysdiygarage8 күн бұрын

  Thank you so much!🙏

• 
  @TheSet614510 күн бұрын

  What's the labor cost for something like this

• 
  @luckysdiygarage10 күн бұрын

  @TheSet6145 it will be around $350 to $650 it depends on the labor rate of the shop. I hope this helps

• 
  @TheSet614510 күн бұрын

  @@luckysdiygarage that's per hour LMFAOO

• 
  @luckysdiygarage10 күн бұрын

  @TheSet6145 hahaha no not 350 an hour!! That's crazy!! 🤣🤣 like some shops charge $80 an hour or 120 an hour... for an example let's say a shop charges 120 an hour and it calls for 4 hours so it will be $480 ..... that's why I make these videos cuz shops and dealerships charge Crazy Prices so that's why I teach people to do it

• 
  @TheSet61459 күн бұрын

  @@luckysdiygarage bro I'm in NYC my sons car had this issue I wanna purchase the front and rear. He got it off a lady with 70K original miles car just sat and he didn't bother to look underneath

• 
  @TheSet61459 күн бұрын

  Has THIS ISSUE

• 
  @curtisbench318311 күн бұрын

  Thank you for this dog it's super simple I might not have jumped into it myself if it wasn't for you

• 
  @luckysdiygarage10 күн бұрын

  I appreciate the support, boss!! 🙏

• 
  @ovilla566811 күн бұрын

  Great vid bro. Kep up the good work! New Sub here !

• 
  @luckysdiygarage11 күн бұрын

  Thank you so much!! I appreciate it!! 🙏

• 
  @Ocean187Gang11 күн бұрын

  Why they both look dirty af lol

• 
  @04swiftstang12 күн бұрын

  Was all that grease in the wheel well from the bad cv axle boot?

• 
  @luckysdiygarage10 күн бұрын

  Yes sir!!

• 
  @MidnightCustoms-C2012 күн бұрын

  HammerWrench Renovations sent me. Great no BS VIDEO 👌

• 
  @luckysdiygarage12 күн бұрын

  @MidnightCustoms-C20 what's up boss!! Thank you so much!!

• 
  @bobgeddes621813 күн бұрын

  Would it be possible, please, to show how to replace the actuator for the dash vents? I get air over the windshield and down to the floor but not through the front vents. It would be greatly appreciated!

• 
  @luckysdiygarage9 күн бұрын

  Hey, what's up, Bob!! Sure, I can do that. My blend door actuators are ok, but I'll replace them for you!!😀 I gotta order some

• 
  @danwilliams760014 күн бұрын

  Don’t forget the put on the spacer, torque all bolts, top off transmission fluid, then get an alignment.

• 
  @HammerWrench14 күн бұрын

  The manufacturer made sure that thing had to go to the dealer to get swapped! Or to LUCKY’S DIY GARAGE

• 
  @luckysdiygarage14 күн бұрын

  Haha that white clip was a bitch to clip back on haha

• 
  @erictalameasina133614 күн бұрын

  Ys the new one like dirtier then the old one

• 
  @luckysdiygarage14 күн бұрын

  I know right!.. but that's just how the material looks like some are gray. Some are yellow, some filters are red and white, haha 😄

• 
  @angels-wk1dn15 күн бұрын

  Ripping people off that's sad is just a very small part to replace 😢

• 
  @luckysdiygarage15 күн бұрын

  @angels-wk1dn I don't like ripping customers off boss..I treat every customers car like if it was my own..I'm an honest technician.i recommended the plastic bushing, but the customer wanted to replace the whole cable ..so he didn't have to deal with it later...😁

• 
  @corygodfrey788115 күн бұрын

  Awesome and concise video bro. Worked the first time following your steps. That's a first! Thanks for uploading

• 
  @luckysdiygarage15 күн бұрын

  @corygodfrey7881 thank you so much!

• 
  @Hov-115 күн бұрын

  Danke

• 
  @uncommonsense475315 күн бұрын

  Great instructions!

• 
  @kenrusso975915 күн бұрын

  Great video, must not be from the north, zero rust seen on anything, isn't there any power steering lines to disconnect???

• 
  @luckysdiygarage15 күн бұрын

  @kenrusso9759 haha no I'm from California..there's no power steering lines on this rack boss..

• 
  @magavsschwaga783416 күн бұрын

  damn he makes this look easy

• 
  @nickdremow402916 күн бұрын

  Dude....it's not that f'in easy...lmao

• 
  @luckysdiygarage16 күн бұрын

  😂😂