Пікірлер

• 
  @raymondchan98028 күн бұрын

  Very beautiful Europa and such a lovely red color.❤

• 
  @BuoyEngine7 күн бұрын

  Thank you !! ありがとう( ˆᴗˆ )

• 
  @FastFreddyRC21 күн бұрын

  Awesome! Great looking car!

• 
  @BuoyEngine20 күн бұрын

  Thank you !! ( ˆᴗˆ )ありがとう

• 
  @kennethleungsАй бұрын

  thanks for telling me that cr-01 can crawl that well. i thought tamiya has no chassis that can do realistic and charming rock crawling.

• 
  @BuoyEngineАй бұрын

  Thanks for watching and commenting!! Yes CR01 is good RC for crawling! (^u^)

• 
  @ariefnugroho49052 ай бұрын

  Always impressed with CR01. Although this tamiya has an old model for chassis and weight compare with other brand. Nice vid. 👍👍

• 
  @BuoyEngine2 ай бұрын

  Thank you so much!! ありがとう。

• 
  @JAM71312 ай бұрын

  こんにちは 何度もすみません💦 今、販売しているタイヤで、CR01ノーマルホイールに合う最大の大きさで近いサイズありますか？ また、干渉しないですか？

• 
  @BuoyEngine2 ай бұрын

  すみません、自分はCR01用ノーマルホイール用は「HB セドナ2.2」以外買ったことがないのでよくわかりません。 干渉については、自分の場合はこの動画の概要欄に書いたセッティングでフロントが時々フェンダーに接触します。リアはリンクを短縮し、リアホイールアーチにタイヤの位置を合わせているのでボディーに干渉しにくいです。

• 
  @JAM71312 ай бұрын

  わざわざすみません ありがとうございますm(_ _)m

• 
  @JAM71313 ай бұрын

  度々すみません どこで、販売してますか？

• 
  @BuoyEngine3 ай бұрын

  自分は「YSS crawlers」というネットショップで買いました。 以前は在庫があってすぐ買えましたが、今はよくわかりません。。

• 
  @JAM71313 ай бұрын

  ありがとうございますm(_ _)m

• 
  @JAM71313 ай бұрын

  はじめまして どこのメーカーのなんていうタイヤですか？

• 
  @BuoyEngine3 ай бұрын

  「HB Racing」(旧名はHot Bodiesかな??)というメーカーの、「HBセドナ2.2」というタイヤです。

• 
  @JAM71313 ай бұрын

  ありがとうございますm(_ _)m

• 
  @alantaylor3533 ай бұрын

  AWESOME.!! 👍 👍 👍

• 
  @BuoyEngine3 ай бұрын

  Thanks!!💖💖💖ありがとう

• 
  @peterparker4374 ай бұрын

  30年前に童友社が発売してたのは知ってるけど、確かこち亀で江崎教授が運転するT型フォードが暴走してぶつかるとこを両さんが見て昔クラシックカーがぶつかるとバラバラに分解するビックリ自動車ってプラモがあったと話して知った。

• 
  @BuoyEngine4 ай бұрын

  コメントありがとうございます！ へー、そんな場面があったんですね、知りませんでした。読んでみたいです。

• 
  @simonabbott7255 ай бұрын

  Beautifully crafted 👌

• 
  @BuoyEngine4 ай бұрын

  ありがとうThank you!! (^v^)

• 
  @cyril19376 ай бұрын

  Tres beau véhicule

• 
  @BuoyEngine5 ай бұрын

  merci　(╹◡╹)　ありがとう

• 
  @bradleylomas75256 ай бұрын

  really nice. I like that the body wasn't a total copy.

• 
  @BuoyEngine6 ай бұрын

  Thank you !! ありがとう

• 
  @user-sm8xm6pm6x6 ай бұрын

  このタイヤどこで売ってますか？

• 
  @BuoyEngine6 ай бұрын

  自分は「YSS crawlers」というネットショップで買いました。タイヤの名前は「RC4WD ダートグラバー 1.55 」

• 
  @user-sm8xm6pm6x6 ай бұрын

  @@BuoyEngine ありがとうございます😊

• 
  @alantaylor3537 ай бұрын

  👌 👌 👍 👍 👍

• 
  @BuoyEngine7 ай бұрын

  （*'◡'*) Thanks!!

• 
  @user-bd5md5cm2j7 ай бұрын

  Wich of your two tamiyas performs better? Bruiser or hylux?

• 
  @BuoyEngine7 ай бұрын

  Bruiser is better. Hilux has a problem structurally that the leaf spring bends when get shock in running.

• 
  @user-bd5md5cm2j7 ай бұрын

  @@BuoyEngine ya, the tranny hangs down too low ,tires are too little and the leafs need to be swapped with the rc4 wd ones. Bruiser out of box does extremely well. I've changed everything on the tundra and f350 except the wheels and tires. There on the way. I'll see how it does with 2.2

• 
  @Matteomeier7 ай бұрын

  Excellent work! And no body clips, that’s great! Bravo! 👍

• 
  @BuoyEngine7 ай бұрын

  Thank you !! ( ˆᴗˆ ) that is hand made body mount with magnet!

• 
  @RcNickster7097 ай бұрын

  Excellent car, Love the look of that body. Thanks for sharing

• 
  @BuoyEngine7 ай бұрын

  Thank you so much for nice comment!! ( ˆᴗˆ )

• 
  @Mouc-RC7 ай бұрын

  Brilliant! Scenery + Filming + Editing + Car 👌

• 
  @BuoyEngine7 ай бұрын

  Thank you! + ありがとう + ( ˆᴗˆ )

• 
  @gpz900rsakura77 ай бұрын

  なにもかも完璧です‼️

• 
  @BuoyEngine7 ай бұрын

  嬉しいコメント有難うございます　(˶ᵔᵕᵔ˶)

• 
  @harimax8027 ай бұрын

  ロータスヨーロッパかっこいい♡

• 
  @BuoyEngine7 ай бұрын

  このボディー低さと形、、どんな感じなのかいつか実車に運転してみたいです。

• 
  @ToyotaGuy19717 ай бұрын

  Great video and car! 👏👏👏

• 
  @BuoyEngine7 ай бұрын

  Thank you !! ありがとう　😃

• 
  @zoridor167 ай бұрын

  incredible car 😍 (is it possible to raise the chassis a little from the ground? to avoid scratches?

• 
  @BuoyEngine7 ай бұрын

  Thanks!! ありがとう。Yes, It is possible.　by damper setting or body mount and or both things.

• 
  @rudolphpotter41677 ай бұрын

  Promo-SM 😝

• 
  @alfredomalinis65788 ай бұрын

  Is this the same truck from your video from 6 years ago? I loved that one two. New body of course.

• 
  @BuoyEngine7 ай бұрын

  Yes, that's correct!! new body on the same chassis same tires and same driver at the time. Thank you very much for watching again! ありがとう!!

• 
  @RCNAMJA8 ай бұрын

  The shock absorber system is amazing!😁😁😁

• 
  @BuoyEngine8 ай бұрын

  Thanks for watching!! (╹◡╹)

• 
  @muddfoot698 ай бұрын

  What rims and tires are these?

• 
  @BuoyEngine8 ай бұрын

  that tires is "HB SEDONA" wheel is kit stock. wheel rims is from TAMIYA options parts.

• 
  @zzangjjae8 ай бұрын

  Love it!!! what is color code?

• 
  @BuoyEngine8 ай бұрын

  Thanks!! that is Tamiya spray dark yellow TS-3.

• 
  @MrJacksonBollock8 ай бұрын

  03:15 the cornering is simply beautiful. The way the front suspension dips is so realistic. Really really good job on the car and the filming. Top Banana!

• 
  @BuoyEngine8 ай бұрын

  Thank you so much!! ありがとう😊 It was hard to make that scene. I made a lot of miss shooting and fail control films.😂

• 
  @jbo4664ngb9 ай бұрын

  次はcc02の40ランクルでお願いします！40ランクル好きでして笑

• 
  @BuoyEngine9 ай бұрын

  コメントありがとうございます!! はい、是非。でも今cc02は持ってません😂

• 
  @jbo4664ngb9 ай бұрын

  @@BuoyEngine 是非、いつの日か🙋　渋いカラーリングで

• 
  @shinodat2o9 ай бұрын

  CR01カッコいいですね 自分は手放してしまって後悔してます

• 
  @BuoyEngine9 ай бұрын

  ド平日、仕事さぼって撮影決行!! 　・・・腰に来ました、、 また手に入れたら並走ですね!

• 
  @DustyFingersRC9 ай бұрын

  Excellent 👍🏻

• 
  @BuoyEngine9 ай бұрын

  Thanks very much !! 😄💖

• 
  @Ayoshi-wl4yn9 ай бұрын

  お久しぶりです😁 ボディが替わってる❗️(笑) いやぁー、いつみてもカッコ良い！！ セドナタイヤ、マジで憧れます😂 もうほぼ手に入らないので、余計に欲しくなります(笑)

• 
  @BuoyEngine9 ай бұрын

  ありがとうございます!!　以前のシャーシのまま、ボディを新調しました! でもこの日けっこうコケましたけど。。 気が付けば一年も動画アップしてませんでした　(゜o゜;) セドナ入手難しいんですねぇ、、大事にしなくては・・・

• 
  @Ayoshi-wl4yn9 ай бұрын

  ​@@BuoyEngine 動画投稿待ってましたよ！(笑) それにしても。。。いいロケーションだぁ😳 まさにクローリングしてくださいって場所ですもんね😆

• 
  @BuoyEngine9 ай бұрын

  そうですね。普通に平日でしたが、三人クローラーさんと遭遇しました。

• 
  @Ayoshi-wl4yn9 ай бұрын

  @@BuoyEngine 本当ですか！！ ３人！😳 僕は1人も出会った事はありません😭(笑) 涼しくなってきたから、僕も久しぶりにやろうかな？？😁

• 
  @Rex_Stuph9 ай бұрын

  A really impressive drive, particularly with open differentials!

• 
  @BuoyEngine9 ай бұрын

  Thanks very much !! (╹v╹)

• 
  @noraneko-to-nezumi57359 ай бұрын

  フロントタイヤ、少しだけボディーの前寄りになってるのも、リアタイヤがフェンダーアーチにピッタリ収まってるのも流石BuoyEngineさんだなーと思いました😊 下腹にプレートも入ってて、見えにくいところも抜りがないですね～✨ てな訳で、 もう一回見返してきます😊

• 
  @BuoyEngine9 ай бұрын

  実車のようにフロントタイヤが前に寄った感じにしたくて、リンクの長さ調整は気合い入れました(｀皿´;)。 それにはいろいろ問題がありましたが、気が付いて頂けて、ほんと頑張った甲斐がありました!!(*ˊᵕˋ*)

• 
  @noraneko-to-nezumi57359 ай бұрын

  @@BuoyEngine めっちゃ前の動画でもホイールベース延長して、ボディーも後退させてらしたのを覚えてたので、今回もそういう拘りがあるんだろうなって思って拝見してました(*^^*)✨(MSTのCMXやったかな？)

• 
  @BuoyEngine9 ай бұрын

  はい、MST CMXですね、動画の冒頭に説明を入れ、強制的に気付いてもらうというものでした。(,,・_・,,)

• 
  @CLAUDIOSRC952910 ай бұрын

• 
  @BuoyEngine9 ай бұрын

  Thanks!! ありがとう（*'◡'*)

• 
  @_blood_moon_proto_150010 ай бұрын

  so, what upgrades had you done at the time? well beyond the tyres

• 
  @fredtedstedman10 ай бұрын

  climbing the dunes 0:29 .....just gorgeous ! Willy natural habitat .

• 
  @BuoyEngine10 ай бұрын

  Thanks!! ありがとう　(╹◡╹)

• 
  @user-bd5md5cm2j10 ай бұрын

  Wow bra....dis almost as good as Matteo.....

• 
  @BuoyEngine10 ай бұрын

  Thanks !!　ありがとう Matteo is the opportunity when I began RC video making.

• 
  @user-bd5md5cm2j10 ай бұрын

  @@BuoyEngine your doing 👍 great

• 
  @TheHudsonValleyWanderer10 ай бұрын

  Beautiful video. I felt like i a took a journey with the dump truck. Which motor and ESC did you use?

• 
  @BuoyEngine10 ай бұрын

  Thank you so much!! ありがとう motor is brushless system 8.5T. the bland is Yokomo ZERO.

• 
  @fredtedstedman11 ай бұрын

  got to be the ultimate Tamiya monster ?? Played at 50% speed you can really see what is happening . Stunning vid , love from Wales .😍😍🙏🙏

• 
  @BuoyEngine11 ай бұрын

  Thank you for nice your comments!! (╹◡╹)

• 
  @fredtedstedman11 ай бұрын

  beautiful , looks totally different without garish stickers !! Like 😍😍😍😍 A little bit mad Max , a little bit Camaro .

• 
  @BuoyEngine11 ай бұрын

  Thank you ありがとう!! Yes, me too. I don't like Original stickers.

• 
  @fredtedstedman11 ай бұрын

  love the paint and decals ! looks like something from Area 51 .

• 
  @BuoyEngine11 ай бұрын

  Thank you for watching my video!! （*'◡'*)

• 
  @phuthovan9621 Жыл бұрын

  đẹp

• 
  @BuoyEngine Жыл бұрын

  Thanks !! ありがとう（*'◡'*)

• 
  @57ouch Жыл бұрын

  this is a master piece, this bronco looks real, the film is perfect, awesome job! can i ask you if you remember where did you found those rubber wiper blade please? thank you very much

• 
  @BuoyEngine Жыл бұрын

  Thank you very much!! ありがとう。 I made that wiper by oneself from plastic materials such as plastic stick　of the thickness of 1mm.

• 
  @57ouch Жыл бұрын

  @@BuoyEngine wow impressive job, i really want to make the same build as yours, do you think it is possible to share some pictures of your build, focus on bumper front, rear to see how you made them? and the interior too ? hope so🤩

• 
  @BuoyEngine Жыл бұрын

  @@57ouch Yes, sure. however, That body is kept at the my hobby garage of another house now... I am going to bring back it when go to there next time and upload the photos to you. please wait some days.(╹◡╹)

• 
  @57ouch Жыл бұрын

  @@BuoyEngine very kind of you🙏👍

• 
  @BuoyEngine11 ай бұрын

  I published the shared link of photos in the description field of this video. please have a look at it.

• 
  @franco992 Жыл бұрын

  I’ve got the Taisan Starcard Porsche on the same chassis. It’s from about 1996. I like mine, but yours is better!

• 
  @BuoyEngine Жыл бұрын

  Ohhh! you have precious body!! that's great... Thank you for watching and comment!!(╹◡╹)

• 
  @RCRoads Жыл бұрын

  Nice paint job. I was wondering how wild willy might look in black. You certainly did an awesome job filming. You did a jump then a 360 around the jeep before it even landed. Super magic. You even managed to utilize and older Hero 2 and it looked great. Thanks for including info on the motor upgrade. I was fairly certain it wasn't stock. I should be receiving mine from Japan in a week or so and I just cant wait. Again AWESOME presentation. ٩(̾●̮̮̃̾•̃̾)۶

• 
  @BuoyEngine Жыл бұрын

  Thank you so much for your nice comment, it's encouraging words to me.　ありがとう！ the film making of this was so fun, that is a good memory now....（*'◡'*)

• 
  @R-EVLMNKY Жыл бұрын

  I’m sure this is the real thing that was shrunk by a laser 😂😂😂

• 
  @BuoyEngine Жыл бұрын

  haha, That's right!! Thank you for watching and nice comment ありがとう(╹◡╹)

• 
  @tongsenglai3359 Жыл бұрын

  Boss.. You are a genius

• 
  @BuoyEngine Жыл бұрын

  Thank you so much!! ありがとう（*'◡'*)

• 
  @klausochs7006 Жыл бұрын

  Echt gute kammerafűhrung 😊👍❣️ Respekt.

• 
  @BuoyEngine Жыл бұрын

  Thank you very much ありがとう!! （*'◡'*)

• 
  @raymondchan9802 Жыл бұрын

  Very beautiful Porsche. I like it so much.

• 
  @BuoyEngine Жыл бұрын

  Thank you very much!! ありがとう（*'◡'*)