Great video. Which connector does the knob have? Maybe if you put an caraudio-systems module and the can box tv 500 in between you can use the ntg button instead the knob.
@ntinos208Ай бұрын
Thank you very much😁 The knob connects to the carplay interface directly. My first attempt was with the module from caraudio-systems, but I had no video. Maybe the adapter was faulty because it was new old stock. I contacted caraudio-systems and sadly they don’t sell this adapter anymore. That’s why I made my own. Also I believe that the knob is faster when you control carplay, instead of having the factory buttons to navigate inside carplay.
@jan6553112257665Ай бұрын
@@ntinos208 oh I didn’t noticed, that they don’t sell it anymore. I was interested to try it in my w211. However I will give a try with this knob. Thanks a lot.
@ntinos208Ай бұрын
@@jan6553112257665 if you don’t want the knob you can try converting to touchscreen. Some carplay interfaces support a touchscreen film. The navinc appplay that I used, supports it 100%. So you could get the screen of the COMAND out, stick on top of it the film and connect it to the carplay interface.
@anhkhoi158Ай бұрын
omg tysm, it’s a little bit complicated but I would try to get it :>
@ntinos208Ай бұрын
The difficult part is getting someone to do the coding with vediamo, if you don’t have a sdconnect. If you do this first, everything else is very doable. For me it was easier because I had sdconnect
@ntinos208Ай бұрын
Retrofit guide available on: kzread.info/dash/bejne/h5qtxM-ncpDSgbA.html
@ntinos208Ай бұрын
The links in the description will be available in 24 hours, because YT does a verification thing 😃
@emret5730Ай бұрын
You are a genius, but this is expert level. Where are you located?
@ntinos208Ай бұрын
@@emret5730 It was difficult to find the way to do this retrofit but the steps are pretty simple i think 😁I am located at Greece.
@thalesmaia66072 ай бұрын
you seems to use the AV Input. But is hard to identify whcih chinese hardware you adopted.
@ntinos208Ай бұрын
I don't use any chinese adapter. I made the adapter on my own. The interface is bought. I have uploaded a retrofit guide on my channel😃
@yiwenZhang-xd3qi3 ай бұрын
Hello, will you still have a video about how to implement this function?
@ntinos208Ай бұрын
I uploaded it today😁
@yiwenZhang-xd3qiАй бұрын
@@ntinos208 Roger that. Thank you for your reply.
@emi50863 ай бұрын
Hello. I've been trying to find something like this for my Mercedes W251 with NTG 2.5 for years. Please, would you be so kind as to tell me how you did it??? Could you post a video of how you did it and what you did? I would be interested in buying one from you, if you sell it!!!! contact me please!! Thank you
@ntinos208Ай бұрын
I uploaded a video on my channel with instructions. If you don't want to do it yourself and you want a ready kit, contact me at [email protected]
@Freddienux3 ай бұрын
where can we buy?
@ntinos208Ай бұрын
If you want a kit sent me an email at [email protected]. But you can do it yourself if you want, I uploaded a video.
@FreddienuxАй бұрын
@@ntinos208 can you share link for instructions? thx in advance
Hello, will there be a video on how you did it? Thanks
@ntinos208Ай бұрын
Here it is: kzread.info/dash/bejne/h5qtxM-ncpDSgbA.html
@anhkhoi1584 ай бұрын
this is really cool, does it available on w169?
@ntinos208Ай бұрын
Yes if you have a comand ntg2.5 on your w169, it is possible
@anhkhoi158Ай бұрын
can u make a video of the tutorial for this one pls 😅
@ntinos208Ай бұрын
@@anhkhoi158 in my channel, I uploaded today a video about this retrofit 😀
@gregnowakowski66934 ай бұрын
Well done. How did you do that?
@manfredmobrugger60934 ай бұрын
Hi what Adapter we need thank you for help
@ntinos208Ай бұрын
There is a instruction video on my channel 😃
@emret57305 ай бұрын
Hello :) we are still waiting forninstructionnon how to get this. This is great...!
@ntinos208Ай бұрын
Hello! The instructions are available here: kzread.info/dash/bejne/h5qtxM-ncpDSgbA.html
@jacquesdopson20805 ай бұрын
Hi, this is great to see! Would you be happy to advise when you might have documentation or details on how to achieve these results? I have a W211 with NTG2.5 and would love this integration. Thank you!
@jacquesdopson2080Ай бұрын
Ntinos208 - Do you have a guide you can share yet?
@ntinos208Ай бұрын
@@jacquesdopson2080I uploaded a video on my channel 😃
@laikopaidi75 ай бұрын
Χωρις να δουλευει το cd-dvd γινεται να φτασουμε στο σημειο να δουλέψει ετσι?
@ntinos2085 ай бұрын
Γιατί να μην δουλεύει το cd/dvd; Εμένα δουλεύει κανονικά
@laikopaidi75 ай бұрын
@@ntinos208 εμένα έχει βλάβη το cd.γινεται αυτή η δουλειά με φισωμα μόνο η με κάποιον άλλον τρόπο να περάσεις δεδομένα στο comand παρακάμπτοντας το cd-dvd player.... ευχαριστώ εκ των προτέρων για τον χρόνο σου
@ntinos2085 ай бұрын
@@laikopaidi7 δεν έχει σχέση το αν δουλεύει το cd με αυτή τη δουλειά. Ουσιαστικά έχω φτιάξει έναν ανταπτορα που κουμπώνει σε μια φισα, πίσω από το ραδιόφωνο και του προσθέτει αυτή τη λειτουργία
@laikopaidi75 ай бұрын
@@ntinos208 είσαι επαγγελματίας?και αν ναι να μας πεις που θα σε βρουμε
@ntinos2085 ай бұрын
@@laikopaidi7 φίλε δεν είμαι επαγγελματίας. Το χω σπουδάσει το αντικείμενο, αλλά αυτό ήταν προτζεκτ που εκανα στον ελεύθερο μου χρόνο για το δικό μου αμάξι. Όμως μπορώ να σε βοηθήσω. Αν θες στειλε μου μειλ στο [email protected] για να σου δώσω εκεί το τηλέφωνο μου. Δεν θέλω να το γραψω δημόσια για ευνόητους λόγους :)
@honges1235 ай бұрын
nice man! can you do a instruction video?
@ntinos2085 ай бұрын
Thank you very much! I will try to make a video!
@honges1235 ай бұрын
@@ntinos208 is it difficult? or easy?
@ntinos2085 ай бұрын
@@honges123it was difficult to find out what it needs. If you know what you have to do is a doable job! I will try to make a video
@honges1235 ай бұрын
@@ntinos208 pls do it faster man😂😂 i will donate you after the video, just give me your paypal
@honges1234 ай бұрын
@@ntinos208 i wait for your video man 🤣
@mrBoryBiker5 ай бұрын
hi, can you give us more specific instructions? I think there are more guys that would like to do it as well! :-)
@ntinos208Ай бұрын
There is a instruction video on my channel😃
@KSavov6 ай бұрын
Dude, this is awesome! Do you have some written instruction or something? I'm not very technical, but would love to have this in my car.
@ntinos2085 ай бұрын
I will try to do a video. If not I will upload instructions!
@davery58726 ай бұрын
How did you make the adapter?
@ntinos2086 ай бұрын
I looked up the schematics. In the E connector you have to get pins 1 and 2. 1 is video input and 2 is video ground. For the audio you connect it to the aux on the quadlock connector. Then you need vediamo to enable the video aux function and code the ntsc or pal. Finally you have to connect a video in motion adapter because the comand blacks out the video for safety reasons when you are driving.
@Daudgen6 ай бұрын
@@ntinos208hi can I write you somewhere on IG or FB? I got same setup and I am in need of carplay ;-)
Пікірлер
Great video. Which connector does the knob have? Maybe if you put an caraudio-systems module and the can box tv 500 in between you can use the ntg button instead the knob.
Thank you very much😁 The knob connects to the carplay interface directly. My first attempt was with the module from caraudio-systems, but I had no video. Maybe the adapter was faulty because it was new old stock. I contacted caraudio-systems and sadly they don’t sell this adapter anymore. That’s why I made my own. Also I believe that the knob is faster when you control carplay, instead of having the factory buttons to navigate inside carplay.
@@ntinos208 oh I didn’t noticed, that they don’t sell it anymore. I was interested to try it in my w211. However I will give a try with this knob. Thanks a lot.
@@jan6553112257665 if you don’t want the knob you can try converting to touchscreen. Some carplay interfaces support a touchscreen film. The navinc appplay that I used, supports it 100%. So you could get the screen of the COMAND out, stick on top of it the film and connect it to the carplay interface.
omg tysm, it’s a little bit complicated but I would try to get it :>
The difficult part is getting someone to do the coding with vediamo, if you don’t have a sdconnect. If you do this first, everything else is very doable. For me it was easier because I had sdconnect
Retrofit guide available on: kzread.info/dash/bejne/h5qtxM-ncpDSgbA.html
The links in the description will be available in 24 hours, because YT does a verification thing 😃
You are a genius, but this is expert level. Where are you located?
@@emret5730 It was difficult to find the way to do this retrofit but the steps are pretty simple i think 😁I am located at Greece.
you seems to use the AV Input. But is hard to identify whcih chinese hardware you adopted.
I don't use any chinese adapter. I made the adapter on my own. The interface is bought. I have uploaded a retrofit guide on my channel😃
Hello, will you still have a video about how to implement this function?
I uploaded it today😁
@@ntinos208 Roger that. Thank you for your reply.
Hello. I've been trying to find something like this for my Mercedes W251 with NTG 2.5 for years. Please, would you be so kind as to tell me how you did it??? Could you post a video of how you did it and what you did? I would be interested in buying one from you, if you sell it!!!! contact me please!! Thank you
I uploaded a video on my channel with instructions. If you don't want to do it yourself and you want a ready kit, contact me at [email protected]
where can we buy?
If you want a kit sent me an email at [email protected]. But you can do it yourself if you want, I uploaded a video.
@@ntinos208 can you share link for instructions? thx in advance
@@ntinos208 never mind found video thx
@@Freddienux kzread.info/dash/bejne/h5qtxM-ncpDSgbA.htmlsi=8_pJDZasHbpLiJYf
@@ntinos208 thx
Hello, will there be a video on how you did it? Thanks
Here it is: kzread.info/dash/bejne/h5qtxM-ncpDSgbA.html
this is really cool, does it available on w169?
Yes if you have a comand ntg2.5 on your w169, it is possible
can u make a video of the tutorial for this one pls 😅
@@anhkhoi158 in my channel, I uploaded today a video about this retrofit 😀
Well done. How did you do that?
Hi what Adapter we need thank you for help
There is a instruction video on my channel 😃
Hello :) we are still waiting forninstructionnon how to get this. This is great...!
Hello! The instructions are available here: kzread.info/dash/bejne/h5qtxM-ncpDSgbA.html
Hi, this is great to see! Would you be happy to advise when you might have documentation or details on how to achieve these results? I have a W211 with NTG2.5 and would love this integration. Thank you!
Ntinos208 - Do you have a guide you can share yet?
@@jacquesdopson2080I uploaded a video on my channel 😃
Χωρις να δουλευει το cd-dvd γινεται να φτασουμε στο σημειο να δουλέψει ετσι?
Γιατί να μην δουλεύει το cd/dvd; Εμένα δουλεύει κανονικά
@@ntinos208 εμένα έχει βλάβη το cd.γινεται αυτή η δουλειά με φισωμα μόνο η με κάποιον άλλον τρόπο να περάσεις δεδομένα στο comand παρακάμπτοντας το cd-dvd player.... ευχαριστώ εκ των προτέρων για τον χρόνο σου
@@laikopaidi7 δεν έχει σχέση το αν δουλεύει το cd με αυτή τη δουλειά. Ουσιαστικά έχω φτιάξει έναν ανταπτορα που κουμπώνει σε μια φισα, πίσω από το ραδιόφωνο και του προσθέτει αυτή τη λειτουργία
@@ntinos208 είσαι επαγγελματίας?και αν ναι να μας πεις που θα σε βρουμε
@@laikopaidi7 φίλε δεν είμαι επαγγελματίας. Το χω σπουδάσει το αντικείμενο, αλλά αυτό ήταν προτζεκτ που εκανα στον ελεύθερο μου χρόνο για το δικό μου αμάξι. Όμως μπορώ να σε βοηθήσω. Αν θες στειλε μου μειλ στο [email protected] για να σου δώσω εκεί το τηλέφωνο μου. Δεν θέλω να το γραψω δημόσια για ευνόητους λόγους :)
nice man! can you do a instruction video?
Thank you very much! I will try to make a video!
@@ntinos208 is it difficult? or easy?
@@honges123it was difficult to find out what it needs. If you know what you have to do is a doable job! I will try to make a video
@@ntinos208 pls do it faster man😂😂 i will donate you after the video, just give me your paypal
@@ntinos208 i wait for your video man 🤣
hi, can you give us more specific instructions? I think there are more guys that would like to do it as well! :-)
There is a instruction video on my channel😃
Dude, this is awesome! Do you have some written instruction or something? I'm not very technical, but would love to have this in my car.
I will try to do a video. If not I will upload instructions!
How did you make the adapter?
I looked up the schematics. In the E connector you have to get pins 1 and 2. 1 is video input and 2 is video ground. For the audio you connect it to the aux on the quadlock connector. Then you need vediamo to enable the video aux function and code the ntsc or pal. Finally you have to connect a video in motion adapter because the comand blacks out the video for safety reasons when you are driving.
@@ntinos208hi can I write you somewhere on IG or FB? I got same setup and I am in need of carplay ;-)
@@Daudgenyeah. IG: ntinosath_