Пікірлер

• 
  @shrinivasgutte694Ай бұрын

  Anyone did PRK with eye sight -8

• 
  @lilirishgrlАй бұрын

  Great footage! Thanks for sharing! Subbed! is it an hour you are allowed to visit with the gorillas?? It seems like the gorillas think it’s pretty cool you think they’re pretty cool 🦍🦍 I feel like this trip would be the best to see gorillas and chimpanzees. I’m just wondering the cost. Still looking into it 😊

• 
  @MrBiggs-wu2kfАй бұрын

  dont waste time on this

• 
  @kevindonaldson16282 ай бұрын

  Bro I've typed in drive connect a million different ways in Google and it doesn't exist....

• 
  @TerrySchlosser2 ай бұрын

  I love my miter 2000 but my miter cuts are not lining up, they are off, now i have set set they miter to a perfect 45 degree angle but my boards are still not lining up ZZZ can you help or advise

• 
  @ShanonBopbeepbd2 ай бұрын

  Been using INCRA ultra for 29 years then decided to upgrade to LS positioner, a few surprises, the hairline curser is not right, it’s like somebody dribbled the paint on, it’s not a perfectly straight line, making all but one of the slots useless. Another surprise was pulling out the template strips get stuck, if you don’t have a nice fingernail to lift the strip over the steel plate, you can easily damage the strip! That can be easily filed down but the hairline curser may should exchange, still gets 5 stars from me!

• 
  @rosemarysmith20152 ай бұрын

  Thank you I’ll try it.

• 
  @zaynabelahmar57143 ай бұрын

  when put my VIN the screen gets loading and nothing appears ! any idea why ?

• 
  @BruceWSims3 ай бұрын

  Ok...hold the phone.....if I were to use this product, it would go on a construction site saw (see: DeWalt). I don't have the sort of high tolerance table saw as seen in the video. What are the chances my saw could produce the close tolerences referenced here? Thoughts?

• 
  @905JimRaynor3 ай бұрын

  I went with the Bates Method. Cost me $30. 20/10 vision. No dry eyes .

• 
  @marlinlarson86283 ай бұрын

  Thanks: I recently purchased LS system and your instructions are a great value to me.

• 
  @marielalinares68983 ай бұрын

  It takes way longer than 10 days to reach a great vision and not everyone gets to 20/20. Everyone heals different and the results are different for everyone.

• 
  @teegoonz743 ай бұрын

  What if you bought a new 8.4 as a upgrade do you use the vin from the old car it came out of or the vin from the car your installing it in

• 
  @njh82774 ай бұрын

  You can never recrate the natural the God has given you. Your eyes will ALWAYS deteriorate after laser eye surgery

• 
  @danyettaharpe4335 ай бұрын

  Would if your screen don't pop up

• 
  @sarahyy.yy_36 ай бұрын

  Would you like to update us again as it has been 6 years since your this video, we will appreciate it if you give us a update in 2024 about your vision it will be helpful for us, thanks😊❤

• 
  @AG-cg7lk6 ай бұрын

  After an hour of viewing this, I think I understand how to use the jig, but I might have to do my test cuts on that bloody mandolin.

• 
  @woody951247 ай бұрын

  Very informative video...Do you have to leave car running or just on acc for the hour of download?

• 
  @TheFalconJetDriver7 ай бұрын

  I was about to pull the trigger on purchasing this jig, and I own the TS LS wonder Fence System and like it very much. But the I box jig too many variables to make it work properly! At $258.00 us this is unacceptable.

• 
  @dale49568 ай бұрын

  Damn jig worked great until I got a new saw now I can’t figure the @#$&*”# out. Whatever, that’s how it goes for me

• 
  @verybigheart8 ай бұрын

  I’m interested in Incra but can’t concentrate on this video due to the intrusive music.

• 
  @ZRHTrainspotter9 ай бұрын

  Be careful, this jellyfish species named Alatina Alata is very venomous, do not touch

• 
  @jaalmemamaza9 ай бұрын

  Thanks for posting this. Very, very interesting to me. I write all about concrete ships on thecretefleet and these are featured in a recent Blog series that I just completed about the McCloskey concrete ships built at Hooker's Point, Tampa, Floria. I didn't realise before that they listed to the degree that they are seen to be on your drone video. I will be sharing your video on my website via a KZread link. Richard

• 
  @harleywood958810 ай бұрын

  These are very good set of instructions. Why was 2 3/4 width used instead of 2 5/8 which is a multiple of 7/8 for DOVJ.

• 
  @Aceofspades73710 ай бұрын

  what was your prescription before surgery? im about -6 myopia with a "thinner" cornea. im unsure about my dry eye test but i will ask them today before i commit to surgery

• 
  @user-uc4tr9jr2l10 ай бұрын

  J'ai les yeux secs même 7 ans après l'opération je regrette cette opération catastrophique

• 
  @ruben_silva11 ай бұрын

  Best follow up video on the subjet i found on the internet. Thanks a lot! It would be nice to ear more about your wife experience as well.

• 
  @timhillcountrytxwoodworker4402 Жыл бұрын

  I love my older Ultra but I must admit, as sophisticated as teh Incr DT Jig is, the right angle fence leaves a lot to be desired, especially for those that only use it periodically. The fence is ok, but the method for securing the stock to the right angle fence is pretty archaic and can easily lead to mistakes with the cut. Does anyone know of a better way to secure the stock vs screw clamps?

• 
  @roxee57 Жыл бұрын

  Can you provide a link to the original video in the description box please.

• 
  @edwardseitler3437 Жыл бұрын

  Why set it up for right tilt and for left tilt , why not just set it up one way. You’re not going to be tilting the blade while using it anyhow

• 
  @edwardseitler3437 Жыл бұрын

  How are you supposed to turn the red knob to adjust for a test cut when you haven’t even made a test cut yet dumbass ? That’s the problem I have with this (alleged) instructional video, it’s not fluid , it bounces from on thing to another confusing people. This video needs to be re-done. Cut out all the BS and make it easier for all amateurs and professionals alike to set it up the correct way.

• 
  @patrickarchuleta9594 Жыл бұрын

  Is the incr ready to cut from it's package.

• 
  @MarkAllan Жыл бұрын

  Some assembly required.

• 
  @robbren8679 Жыл бұрын

  This is a thank you from the future of 2023. I have my PRK in two days. When blood is drawn, I am the type of person who needs to know what to expect, and to watch it happen. This video has made me feel less anxiety and more excitement.

• 
  @edwardseitler3437 Жыл бұрын

  Why couldn’t Incra just mark the blade guards “Front” and “Rear” clearly on top so there would be no misunderstanding where they go. .???

• 
  @edwardseitler3437 Жыл бұрын

  😴😴😴🥱🥱🥱😴😴🥱😴🥱😴🥱😴🥱😴🥱😴🥱😴

• 
  @edwardseitler3437 Жыл бұрын

  Be sure you play with the blade guards back and forth, back and forth, back and forth so you look like an idiot just like they do in the video. 😈

• 
  @edwardseitler3437 Жыл бұрын

  The hex key that’s supplied to attach the fence to the miter is too short it’s banging against the fence when tightening the screws unlike the one they use in the video which Is much longer. Apparently they love to use tools not associated with their jigs. It’s like someone at Incra said, “hey let’s really screw with these peoples heads, then we can all have a laugh 😈 at their expense.” So I suggest taking that wrench to your nearest Hardware or Big Box store and getting a much longer one. Then on your way home, toss the smaller one out the window and have your own little laugh 😈

• 
  @MansurHzl-iw2gp Жыл бұрын

  her zaman en iyisine

• 
  @samwise_K Жыл бұрын

  Thanks for the video! Great to hear your thoughts. Did your wife have LASIK again for the touch up or was it PRK as a touch up?

• 
  @fakhrulamin9888 Жыл бұрын

  What was your prescription before you had the laser eye surgery?

• 
  @daveotter5547 Жыл бұрын

  Hey Mark not sure if you still monitor your KZread. I enjoyed your travel log. I am planning a trip in early 2024. Were you all on tours that were pre-booked or did you figure it out upon arrival? Tips, suggestions, cautions? Any info would be appreciated. Also are you in Powell River? Thx

• 
  @sahilmehra2618 Жыл бұрын

  After prk surgery 1 week after sloly face wash with clos my eye again my vison blurry what I do plz tell me

• 
  @darencunningham2568 Жыл бұрын

  I just bought the combo to use with my table saw and router set up. LOVE IT!!! So accurate and a joy to work with. THANKS INCRA!!

• 
  @guismth Жыл бұрын

  Thank you Mark. Just got mine, setting up today.

• 
  @fazalihtisham4421 Жыл бұрын

  How's your vision now? Did your surgeon use mytomycin c during your surgery? Would be grateful if you could answer, thank you

• 
  @MrDiegogue Жыл бұрын

  What is a design toolkit?

• 
  @joe7528 Жыл бұрын

  Just found this video ( 1/22/2023 ) I'm having PRK surgery Friday

• 
  @bootsauce47 Жыл бұрын

  PRK recipient here. And Mark is someone to help me decide to get it done all those years ago! I just had my eyes tested for my job again (I drive for a living). I have 20/25 still after 11 years!!! I have a similar experience of when not being hydrated eyes get dry and stick to eyelids and vision is optimal when I am hydrated. My night vision is good. But when I pick up passengers sometimes (I don't still see halos) the contrast between light and dark is really obscured facing a traffic light and on a dark corner though. The reason I use punctuation when I'm typing is I don't like reading big blocks of comments (working on my grammar). I feel like I strain my eyes too much when someone try's to convey an idea in a big BLOCK-Y form. I usually skip reading it (no need to diminish my vision further for someone nearly pushing 50). My near sighted vision is good and again is dependent of how hydrated I am. So far so good!

• 
  @kimobruns Жыл бұрын

  Did you have TransPRK or alcohol assisted PRK?

• 
  @MarkAllan Жыл бұрын

  I don’t know. When I did it they just called it PRK.

• 
  @cr7neymar908 Жыл бұрын

  I got PRK 8 months ago and the only side effect I have is dry eyes