Hello,
I am Kumar, B.Tech - Mechanical & M.B.A in Project Management. I have 19+ years of experience in the field of Mechanical - Product Design & Development, working as Mechanical - Product Design Consultant
I am Certified SolidWorks Professional issued by Dassault's Systems, USA.
Specific Experiences:
• Experience in the field of Product Design and Development, right from Concept generation, Concept selection, creating prototypes & testing, detail design and preparing final drawings for manufacturing.
• Domain experience like Water Purifier, Medical Equipment's and Electrical & Electronic Enclosure.
• Good experience in VA/VE solutions, Reverse Engineering, Sheet Metal Design, Casting and Plastic Components Design.
• Acquired experience in hand on calculations to evaluate the strength of components and FEA analysis.
• Proficiency in Mechanical CAD Software's like SolidWorks, PTC - Creo and Ansys
Please Contact Me : [email protected]
Пікірлер
where can i get pcb file
You can make PCB board with approx. dimensions for practice
Needed to figure out how to add the file to show in my logo folder
This was very helpful, Many Thanks!
Sir teach HVAC classes based on its sheetmetal
Thanks a lot Sir
Jiski jaroorat hai wo bataya hi nahi apne kya baat hai......
This is Introduction, later video I will add with calculations.
Nicely done, thanks!
You should not place sketches on existing solid faces (7:14) when you have an easy opportunity to put it on the base plane. It makes the model unstable and relying on previous features and Solidworks is terrible with stability of features. You don't build the model as a one-timer thing unless it actually is a build-print-forget thing. Think about modifying it and about your workmates that might take it over in the future.
Thanks for taking time...taking existing face is preferred because when we modify patent feature, it will loose it's dependency, and child feature can move any where. What you said concept is mostly useful in top down approach, when we create two different components in an assembly, with edit mode. In future, I am going to add more videos on topdown approach.
Величезне дякую вам!!!!!! Вже дуже довго мучився і не міг зрозуміти як це працює, а завдяки вам у мене все вийшло)))))))
I tried, but it is not working. Not flattening.
Thankful
Hi is it possible to split multiple parts in an assembly STP file and then delete the other parts in the assembly that was split?
Convert assembly file into single part file, then Convert this part file to step file, import step file into part solidworks, now you can split any part and also delete. If possible I will try to make video. You must be asking this question for 3D printing.
Hi @@mechcadicaltutorial I am asking more for process plant assemblies, in SolidWorks. Thank you for replaying to my comment. I am currently working with a standard plant 3D model that was sent by the supplier but I managed to split the standard plant into sub-sections so that I can customize the placement of certain piping, conveyors and feed lines. To show where it connects into the existing plant and adjust the positioning and spacing of the new process plant pipes, conveyors and feedlines and new machinery. Thank you for the video with it I was able to split the model using planes and sub-divide the areas, into more manageable sub-sections.
good job, Never stop producing videos like this.
thanx
Where is location of image capture
Good question, simply open ms paint or power point, use ctrl+V to paste image.
Good video, and thank you for sharing your voice instead of music
where is the no corner relief?
This is about, closed corner, see other video in playlist for corner relief.
@@mechcadicaltutorial thank you brother
How to make multilayer roll or spiral when only the different length of different objects are known... Just like a multilayer paper roll where every layer paper has different length
I have done all this but everytime i place the bolt or nut in an assembly drawing it is not visible😢
thank u, it's work
thanks for the KT, please provide FEA in detail
Sure
Thanx
Hi! Thanks for the trick but it is possible to make it with a sheet of metal, the curve we have to have tool with the curve not easy, but it is a real modelisation CAD.
Yes, you are right... Sheet Metal Manufacturing is technology based, so this curvature can be made, this is decided in DFM stage.
@@mechcadicaltutorial It's nice, i have a look in another of your's video of Solidworks. Thanks.
Sir, it is required to select all the surfaces where the pressure will act .?
Yes
INFORMATIVE VIDEO, THANKS
Crap transcript
way you dont use the tool in the center of the plate?
Thanx
hi Sir, I can't edit the gap distance, can you help me?
I will see, why you are facing problem
Thanks man helped alot .
hey do you have the full part dimensions
Yes
@@mechcadicaltutorial if you can give it to me It would be a great help. great video by the way
I will share the link you can download
@@mechcadicaltutorial thanks :)
Excellent..!! I cannot thank enough!
Thank you...
@@mechcadicaltutorial Sir. I sent you an email regarding private tution for Solidworks and Project Management. If you could get back that would be soo great.
roller and the disk copy together, not separately
thank you so much, this was so helpful!
This "repeat last command" is like "Spacebar Command" in Auto CAD, so In solidworks you can use "Enter Button" for same application, which saves time, this command is for all the modules like part modeling, sheet-metal etc
👍👍
Thank you. Very helpful!
Thank you so much
Thank you very much 🙏🙏
Great tutorial, thanks for sharing!
Waiting for a double knock out forming too video. Thanks.
Thanks a lot sir for uploading a single knock out forming tool.
Turn off the music and get the sock out of your mouth and speak up.
Thanx for your feedback, I will consider this.
'promo sm'
Hello sir kindly upload video sheet metal single and double knock out forming tools.
Already uploaded
Thank you so much.
If I have to select 3-4 times to repeat a command what's the use, instead I'll directly choose that command.
You are right, but this option for quick access
@@mechcadicaltutorial ghanta quick access it takes to much time than that
time waste kr diya mera
Hello Brother, This "repeat last command" is like "Spacebar Command" in Auto CAD, so In solidworks you can use "Enter Button" for same application, which saves time, it command is for all the modules like part modeling, sheet-metal etc.. I will try to make elaborated video of this command in future. Thank you for your time and feedback...All the best
Nice, can you show the flattened version.
I forgot to show flat pattern. But I have seen, it works.
Thankuuu thankuu so much sir....