What’s the time , for a car like this it looks kinda fast. 9.3 1/4 mile time I’m guessing?
@deweyford78693 сағат бұрын
Cant wait to see the Turbo kit for the Z06. Do you think there will be any tips for unlocking the Z06 ECU in the ZR1. My Z needs turbos
@Dookamonnnn4 сағат бұрын
I was just googling if people were doing this 10 speed swap for c6 Corvettes but so far everyone is saying it isn't possible
@Rdizil-ox1ye4 сағат бұрын
Idk y I thought the car was electric
@genghischaospersonafied7 сағат бұрын
Highly entertaining vid. Thanxs👍👏👏👏
@dhan2199 сағат бұрын
So technically you can get an Idea how fast the zora will be. This is basically a Zora with a L2.
@sebastiandelgado411420 сағат бұрын
Can’t wait to see this platform be pushed and see these perform on the street
@roieljr23 сағат бұрын
Roll race monster !!
@7071t6Күн бұрын
Also what trans cooler have you used, did you install temp gauge for the trans cooler and is it connected though to the radiator, after all you have a intercooler for the supercharger right, so then you must have a trans cooler with a built in fan and temp sensor, after all your in mexico so hi temps always, which is not good, plus did you notice all the blue smoke from the exhaust, which is saying or telling you something either the oil your using is old or the wrong spec oil, there should be no blue smoke coming out of the exhaust mate, its burning oil through the oil rings of the pison, so maybe the compression ring gap is set wrong based on the Compression ration, anyway keep it rockin buddy love it, i have a 2015 HOLDEN Series 1 REDLINE with added extras like rear brembo brakes and rear straight through mufflers and a KN air filter, nothing else, its stock as a rock.🦘🚓🚓😎👌👍✌🦘
@7071t6Күн бұрын
after all that the left hand or drivers tail light does not work, maybe you should check everything to make sure its working correctly? Still what about the tailshaft, is it stock or is it made to suit the 1,200hp figers plus if your going to get even more HP, then you going to need a tailshaft that can handle over 2,000 hp better to be safe than sorry mate, Love the car, but better if that bonnet or hood boulge is lower it looks stupid IMO? Plus what about the diff what is it, cant be a stock HSV unit must be a 9.9 inch with massive HP rating like over 2,000hp would make it safe? 😎😎👌👍✌🦘🚓
@sstevocamaroКүн бұрын
New Orleans! Love the channel.
@cameron111567Күн бұрын
Houston 24 z06
@davidyoung2733Күн бұрын
When you do another eray I would like to see a head and cam combo run at the track to see if it would run high 9's
@skillz1855Күн бұрын
You guys did an excellent job with the C8
@timothyvaher2421Күн бұрын
Impressive build & presentation! Watching from Seattle, WA
@black_hearted6925Күн бұрын
Louisiana, that’s a badddddd mf
@denalidriven1574Күн бұрын
Chin strap neck beard has to go bro just be a billionaires son and leave it at that.
@jaredharrington24Күн бұрын
Damn, that thing wants to wheelie!
@mikeh56202 күн бұрын
😂😂. Congrats . 1000+rwp and only 9.5 . It’s videos like this that make me happy I bought a 6th gen Camaro. I run 9.48 @ 144 SBE on the motor with 650rwp. I don’t understand why he is so happy . 😂😂
@EdMiF10 сағат бұрын
It is pretty hot there, so...
@nahum19862 күн бұрын
Greats from SPAIN/BELGIUM
@mr.chandler81442 күн бұрын
Way to go Bratha, REALLY awesome Engineering 👌
@danresciniti2 күн бұрын
WOW!! Great job BoostDistrict! Very impressed.
@Mrbrown57142 күн бұрын
one thing about E-RAY is its a stop light killer car where most action take places for the price point unbeatable
@kevinlarrea11252 күн бұрын
W vid, 0-60 time?
@zacherytenpleton30492 күн бұрын
Michigan 🖐🏽
@johnvaladez2222 күн бұрын
San Antonio Texas, great job 👍
@FordPickUPRed2 күн бұрын
Give that good doggie a treat :)
@felixgato7182 күн бұрын
Roll cage next?
@uberdriver57113 күн бұрын
I still would rather go with the old man that's putting a big block in a c8 and it's not a bored out or stroked ls.
@LordLoMR23 күн бұрын
For some reason I read the title as twin turbo eBay corvette. 😂
@boduke942821 сағат бұрын
I think that's on a Cleetus video, lol
@jaybrown42463 күн бұрын
I'm loving that nothing is breaking !! Yet...
@mattfrench8843 күн бұрын
That’s SF90 speeds. Congrats man.
@Ybshy3 күн бұрын
How fast is that E-ray with no turbos?
@CrucialTech13 күн бұрын
Please make this twin charged that would be crazy twin charged hybrid v8
@tyreevans59283 күн бұрын
Wow that’s almost a wheelie at 12:09 -12:13
@carlos640303 күн бұрын
The E-Ray sounds so good! I'd take this any day over the Z06 simply because of the better sounding, traditional cross-plane crank engine's exhaust note.
@tyreevans59283 күн бұрын
This thing needs to go hi 8’s I’m still watching though I’m at 7 minutes
@kurtthomas47463 күн бұрын
Very impressive, keep up the great work. From Bangor Maine. Our lobster is better than yours. Lol
@JoeStill-un9gp3 күн бұрын
153 with no rollcage? Did they run you off the track?
@JoeStill-un9gp3 күн бұрын
Is that a fishing 🎣 rod hanging out the back?
@boostdistrict3 күн бұрын
Yes
@JoeStill-un9gp3 күн бұрын
Don't you need a rollcage, if you do mods?
@Z06_Bandido3 күн бұрын
That’s the world’s fastest Carbon “Flash” Metallic!! “The C8 Wizard” does it again… wow 😮 🙌🏽🙌🏽🙌🏽🙌🏽
@johnjulien67813 күн бұрын
Hey bud johnny form montreal quebec canada
@shadowbotz42933 күн бұрын
Following the development of this Eray closely. Once you get it dialed in this should go 9.4x with the current setup. 1200 awhp should be 8.9xx
@boostdistrict3 күн бұрын
As it sits with 1030whp and our current suspension setup- the car will go 9.1x- it's already gone 153mph on the same power level but on cooler weather last month.
@shadowbotz42933 күн бұрын
@@boostdistrict just up the boost and you’ll hit those 1/4 miles times in the heat lol 🍻
@samv69343 күн бұрын
what fuel are you running? I think I have asked that 10 times with no answer
@natrontucker83443 күн бұрын
ATL great video
@user-pn9th9nq5m3 күн бұрын
Starkville ms
@justincharles65853 күн бұрын
How much power was used on the first past ?
@boostdistrict3 күн бұрын
this is all on the same 12psi boost level about 1000-1030awhp
@nfltitus19233 күн бұрын
indy that eray is crazy
@a-ram74713 күн бұрын
Downey CA We need BD in CA
@boostdistrict3 күн бұрын
we miss you all too! on to bigger and better things here though!
@a-ram74713 күн бұрын
@@boostdistrict I don't blame you with all of CA commie laws
Пікірлер
Here from 510 - Oakland
What’s the time , for a car like this it looks kinda fast. 9.3 1/4 mile time I’m guessing?
Cant wait to see the Turbo kit for the Z06. Do you think there will be any tips for unlocking the Z06 ECU in the ZR1. My Z needs turbos
I was just googling if people were doing this 10 speed swap for c6 Corvettes but so far everyone is saying it isn't possible
Idk y I thought the car was electric
Highly entertaining vid. Thanxs👍👏👏👏
So technically you can get an Idea how fast the zora will be. This is basically a Zora with a L2.
Can’t wait to see this platform be pushed and see these perform on the street
Roll race monster !!
Also what trans cooler have you used, did you install temp gauge for the trans cooler and is it connected though to the radiator, after all you have a intercooler for the supercharger right, so then you must have a trans cooler with a built in fan and temp sensor, after all your in mexico so hi temps always, which is not good, plus did you notice all the blue smoke from the exhaust, which is saying or telling you something either the oil your using is old or the wrong spec oil, there should be no blue smoke coming out of the exhaust mate, its burning oil through the oil rings of the pison, so maybe the compression ring gap is set wrong based on the Compression ration, anyway keep it rockin buddy love it, i have a 2015 HOLDEN Series 1 REDLINE with added extras like rear brembo brakes and rear straight through mufflers and a KN air filter, nothing else, its stock as a rock.🦘🚓🚓😎👌👍✌🦘
after all that the left hand or drivers tail light does not work, maybe you should check everything to make sure its working correctly? Still what about the tailshaft, is it stock or is it made to suit the 1,200hp figers plus if your going to get even more HP, then you going to need a tailshaft that can handle over 2,000 hp better to be safe than sorry mate, Love the car, but better if that bonnet or hood boulge is lower it looks stupid IMO? Plus what about the diff what is it, cant be a stock HSV unit must be a 9.9 inch with massive HP rating like over 2,000hp would make it safe? 😎😎👌👍✌🦘🚓
New Orleans! Love the channel.
Houston 24 z06
When you do another eray I would like to see a head and cam combo run at the track to see if it would run high 9's
You guys did an excellent job with the C8
Impressive build & presentation! Watching from Seattle, WA
Louisiana, that’s a badddddd mf
Chin strap neck beard has to go bro just be a billionaires son and leave it at that.
Damn, that thing wants to wheelie!
😂😂. Congrats . 1000+rwp and only 9.5 . It’s videos like this that make me happy I bought a 6th gen Camaro. I run 9.48 @ 144 SBE on the motor with 650rwp. I don’t understand why he is so happy . 😂😂
It is pretty hot there, so...
Greats from SPAIN/BELGIUM
Way to go Bratha, REALLY awesome Engineering 👌
WOW!! Great job BoostDistrict! Very impressed.
one thing about E-RAY is its a stop light killer car where most action take places for the price point unbeatable
W vid, 0-60 time?
Michigan 🖐🏽
San Antonio Texas, great job 👍
Give that good doggie a treat :)
Roll cage next?
I still would rather go with the old man that's putting a big block in a c8 and it's not a bored out or stroked ls.
For some reason I read the title as twin turbo eBay corvette. 😂
I think that's on a Cleetus video, lol
I'm loving that nothing is breaking !! Yet...
That’s SF90 speeds. Congrats man.
How fast is that E-ray with no turbos?
Please make this twin charged that would be crazy twin charged hybrid v8
Wow that’s almost a wheelie at 12:09 -12:13
The E-Ray sounds so good! I'd take this any day over the Z06 simply because of the better sounding, traditional cross-plane crank engine's exhaust note.
This thing needs to go hi 8’s I’m still watching though I’m at 7 minutes
Very impressive, keep up the great work. From Bangor Maine. Our lobster is better than yours. Lol
153 with no rollcage? Did they run you off the track?
Is that a fishing 🎣 rod hanging out the back?
Yes
Don't you need a rollcage, if you do mods?
That’s the world’s fastest Carbon “Flash” Metallic!! “The C8 Wizard” does it again… wow 😮 🙌🏽🙌🏽🙌🏽🙌🏽
Hey bud johnny form montreal quebec canada
Following the development of this Eray closely. Once you get it dialed in this should go 9.4x with the current setup. 1200 awhp should be 8.9xx
As it sits with 1030whp and our current suspension setup- the car will go 9.1x- it's already gone 153mph on the same power level but on cooler weather last month.
@@boostdistrict just up the boost and you’ll hit those 1/4 miles times in the heat lol 🍻
what fuel are you running? I think I have asked that 10 times with no answer
ATL great video
Starkville ms
How much power was used on the first past ?
this is all on the same 12psi boost level about 1000-1030awhp
indy that eray is crazy
Downey CA We need BD in CA
we miss you all too! on to bigger and better things here though!
@@boostdistrict I don't blame you with all of CA commie laws