Пікірлер

• 
  @yngdexter2 ай бұрын

  I changed the fuses and the lights but it’s still not working would it be the ballast?

• 
  @Hunch0trades3 ай бұрын

  Watching this video in 2024 , spare fuse still works jus saved me 🙏🏽🙏🏽💪🏽💪🏽

• 
  @happypoor4hr5244 ай бұрын

  Hopefully that works 🥲 I’ll update

• 
  @RB-pr1xs4 ай бұрын

  Hey any updates on if you did rear fenders

• 
  @peter4794 ай бұрын

  M 50 spruitstuk

• 
  @revaztkemaladze72505 ай бұрын

  The catalyst is e46 m54. I want to install bmw e60 M54. Is it the same ?will go without modification?

• 
  @neighborhoodgearhead29585 ай бұрын

  Honestly I don’t know but I think it will bolt on to the motor just won’t line up with the bottom flanges but like I said I don’t know fs sorry bud

• 
  @noodlezhp3 ай бұрын

  They are the same depending on the liter of the engine I have 2 e46 the 330ci catalyst fits but the 325i I have doesn't you would have to swap muffler system all together

• 
  @bryanismename41855 ай бұрын

  hey bro where did u get the new fuse from to replace the old ones, i changed the bulb a couple days ago but neither of them turn on still so i wanna rule out the fuse theory before i go in to mess with the actual wiring

• 
  @neighborhoodgearhead29585 ай бұрын

  I bought them off Amazon 🤙there’s a whole kit for all fuses for different cars so that’s the one I recommend I haven’t had any problems with them

• 
  @Banana_hawj6 ай бұрын

  Very epic video, what wrap did u buy on ebay? Was there a brand name?

• 
  @trippie_fabio31816 ай бұрын

  You think it’d work with a 330ci facelift cabrio?

• 
  @glennlong66277 ай бұрын

  Thanks man same problem 💯

• 
  @lukecameron51910 ай бұрын

  Search up, “BMW No-Crank, No-Start (intermittent)”, pine hollow auto diagnostic.

• 
  @neighborhoodgearhead295810 ай бұрын

  I fixed it two years ago it was a bad clutch switch harness.I spliced a new one in and she fired right up👌

• 
  @lukecameron51910 ай бұрын

  @@neighborhoodgearhead2958 I’ll make a vid on the wires if u could tell me which one, I saw a vid where u could splice the yellow and purple with the black and blue and u don’t need to push the clutch in after that, is that what your talking about?

• 
  @neighborhoodgearhead295810 ай бұрын

  @lukecameron519 yes but I wanted to keep it as stock as possible so I left the neutral safety switch so I still have to press the clutch in like stock.I just put the pig tail that connects to the sensor.

• 
  @lukecameron51910 ай бұрын

  @@neighborhoodgearhead2958 okie I’m gunna post the vid so let me know

• 
  @lukecameron51910 ай бұрын

  @@neighborhoodgearhead2958 posted it

• 
  @estefanyvillalta515011 ай бұрын

  Tutorial on how you installed your new lights 😭cuz right now I’m struggling because my daytime lights are not turning on . The ones that are in the side with a curve😢

• 
  @mandosZ6 ай бұрын

  i’m pretty sure those are only reflectors not lights haha. or wait are those supposed to turn on?🤣

• 
  @EvolutionEnthusiast11 ай бұрын

  Get to "Dezz 🥜 Nuts"😂

• 
  @audisportcarrasco11 ай бұрын

  👍 nice

• 
  @numbflamez3207 Жыл бұрын

  Hey bro my headlight harness was loose and was rubbing up against my tire . My driver side light low/high beam don’t work . Do you know where I can find a replacement for a 2003 Nissan 350z ? Is it hard to mess with the harness

• 
  @neighborhoodgearhead2958 Жыл бұрын

  If you know how to do wiring then it shouldn't be a problem but I do think the light harness disconnects from the rest of the harness so it should make it easy to replace if needed.

• 
  @Alexpzzz Жыл бұрын

  What you do replace the fuse I’m guessing? What fuse number is it??

• 
  @neighborhoodgearhead2958 Жыл бұрын

  Hey yes I did replace the fuse and I don't remember the fuse number off the top of my head but I think I explaine in the video what fuse it is and where it's at.

• 
  @itzapex5475 Жыл бұрын

  Can I fit m3 front wings onto a msport 320 Cabrio if not what would I need

• 
  @neighborhoodgearhead2958 Жыл бұрын

  I don't know off the top of my head but I can ask around

• 
  @absolutecrooks6005 Жыл бұрын

  Yeah good video but my driver headlight still won't come on, it must be something else

• 
  @silas.anderson Жыл бұрын

  did you end up rotating the flanges? also did you have to extend where the flanges were? i heard they could be too short

• 
  @neighborhoodgearhead2958 Жыл бұрын

  I haven't yet but I am just going to rotate the flanges in the second portion of the exhaust so it's a bit easier to do.

• 
  @silas.anderson Жыл бұрын

  @@neighborhoodgearhead2958 so were you running with just open flanges then? and im rotating the flanges on the headers as they aren't fully installed yet but im doing it at my school. im just overthinking everything and hope nothing comes up where i have to go back to stock as i attempted it before but found out they were rotated 90 degrees and gave up for 6 months.

• 
  @rogervalerio435 Жыл бұрын

  Thank you so much bro, I had bought the ballast thinking it was that and when that didn’t work I thought it was something to do with the electric stuff and somehow ended up seeing your video and that was it all this time the fuse 🤦🏻‍♂️

• 
  @neighborhoodgearhead2958 Жыл бұрын

  Glad to help😄👍

• 
  @jasmincuevas3780 Жыл бұрын

  I really enjoyed your video & it was pretty helpful

• 
  @neighborhoodgearhead2958 Жыл бұрын

  Yeah of course😊👍

• 
  @robwine8227 Жыл бұрын

  Simply cut flange off an reweld in direction you need

• 
  @robwine8227 Жыл бұрын

  You don't even need the rear o2s,

• 
  @neighborhoodgearhead2958 Жыл бұрын

  I know thanks man🤙

• 
  @PhillipYu Жыл бұрын

  TLDR : yes they fit

• 
  @heyimadrian.4546 Жыл бұрын

  fucking thank you

• 
  @TRAKTOR1STAS4 ай бұрын

  Does that kit fit 330d universal ?

• 
  @javetsanto Жыл бұрын

  hey man great vid! what glue did you use if at all?

• 
  @shadmanzzd Жыл бұрын

  Make more video Brodie !!

• 
  @topfloorb0ss Жыл бұрын

  how did u get the m3 headlights on the 330?

• 
  @neighborhoodgearhead2958 Жыл бұрын

  There regular 330ci headlights

• 
  @topfloorb0ss Жыл бұрын

  @@neighborhoodgearhead2958 yea i realized, i was looking at the ones with the facelift

• 
  @teresahardy5895 Жыл бұрын

  Intro music is killer.

• 
  @jerrysmith7166 Жыл бұрын

  you can hold a bar of soap on it as well

• 
  @sup1rb8y Жыл бұрын

  Vegas gang

• 
  @korijecars Жыл бұрын

  where can i find the rear fender?

• 
  @neighborhoodgearhead2958 Жыл бұрын

  It depends I mean if you want to stay oem find someone selling the rear quarters or you should be able to find body kits online that are very similar.The ones that are on my car now are cheap fender flares the previous owner put on so there bad I don’t recommend.

• 
  @korijecars Жыл бұрын

  @@neighborhoodgearhead2958 oh thx bro!

• 
  @UsualVenus Жыл бұрын

  Everyone Doing it Not Everyone Posting About it Tho!! 🤓

• 
  @mikelvn5410 Жыл бұрын

  I started a youtube recently I also live in Vegas and I'm starting my e46 build in also have an e90 n54 Goodluck with your build

• 
  @neighborhoodgearhead2958 Жыл бұрын

  Hell yeah man hopefully I get to see you around🤙

• 
  @pickle4034 Жыл бұрын

  Its cool

• 
  @STATICBIMMER Жыл бұрын

  Doin this in bout 10 minutes 😂

• 
  @E36_boat Жыл бұрын

  I did the same thing on my 330ci but I used an oem front bumper and fitment is flush

• 
  @neighborhoodgearhead2958 Жыл бұрын

  Hell yeah well I hope I find one for a decent price I was able to get ahold of some oem m3 rear quarters for $20 so hopefully I get to show you guys that next month🤙

• 
  @Thomas-gf2ql Жыл бұрын

  the side brackets lined up nicely to the m bumper? Thinking about getting a bimerworld m3 clone one, theirs are really quality

• 
  @alimorales37969 ай бұрын

  Did you install the fenders? And did you need the fender liner? Or used the regular 330ci fender liner

• 
  @spinna7563 Жыл бұрын

  looks dope

• 
  @neighborhoodgearhead2958 Жыл бұрын

  Thank you 🙏

• 
  @legendarybimmer3297 Жыл бұрын

  Right on Brutha

• 
  @neighborhoodgearhead2958 Жыл бұрын

  Thank you means alot 🙏

• 
  @kasen3688 Жыл бұрын

  🤗 『p』『r』『o』『m』『o』『s』『m』

• 
  @carlosfoster19922 жыл бұрын

  Hey this ain’t no hate but please stop saying Umm…Every few words lbvs You got a pretty nice Build going 👌🏾

• 
  @Project-gr6zy2 жыл бұрын

  the x pipe needs to be closer to the engage to give a better sound, this is my ford 4.9 litre i6 with my custom X pipe system but its only a ft and 2 inches from the ports on the head and is a split manifold setup aka 3 front and 3 rear that join together in a Y or as duals out, My setup here kzread.info/dash/bejne/oHqCvKyYprHXZ6g.html

• 
  @artofbeatspro2 жыл бұрын

  He did this half wrong. The blue hose goes from the egr into the vacuum solenoid thats also in the back of the manifold. Then that white/black check valve also comnects to the vacuum solenoid to the intake manifold. Look at the diagram he shows.

• 
  @neighborhoodgearhead29582 жыл бұрын

  Hey sorry I dont mean this in a rude way but my vacum solenoid is connected after the white and black filter.If you want me to show you I am happy to.Some e46s run it before and some run it after.

• 
  @danc2014 Жыл бұрын

  You should have replace that line too as it will also be a poor condition. But it is not in the right location The one way valve prevent oil flow from the engine cover without it or wrong position you can get oil into the vacuum switch and clog it. The diagram is correct your last installer was not. . Also tie up the blue line away from the engine or you may get more leaks soon.

• 
  @DeadEnDCrew2 жыл бұрын

  im gona be tackling this job this week, i car idles like shit until it warms up then all is good, so i suspect its this line i need to refresh, i also already replaced my intake boots, upper and lower, DISA. cleaned, ICV and throttle body. and changed cam intake sensor. still i have ruogh idle and lean codes. its most most likely a stubborn vac leak.

• 
  @neighborhoodgearhead29582 жыл бұрын

  Sounds like a vacuum leak I would purchase a evap smoke machine to find out exactly where it's at.I am going to soon because these e46s having 20 year old hoses and Seals go out and it will save you time and money to find exactly where the leak is and replace that part.

• 
  @tiagofilipe24812 жыл бұрын

  Mine is diese wont start, you dismounted all the car to repair this

• 
  @neighborhoodgearhead29582 жыл бұрын

  No I just rebuilt the car from a shell so I already had the front end off

• 
  @neighborhoodgearhead29582 жыл бұрын

  Is yours manual?

• 
  @tiagofilipe24812 жыл бұрын

  @@neighborhoodgearhead2958 yes it is 320d 136 hp

• 
  @neighborhoodgearhead29582 жыл бұрын

  @@tiagofilipe2481 is there no crank or is it cranking

• 
  @tiagofilipe24812 жыл бұрын

  @@neighborhoodgearhead2958 it was cranking, removed auxiliary pump, but I think its working...car dont turn on, maybe injection pump is bad

• 
  @rodrigogomez18202 жыл бұрын

  good video bro appreciate itb

• 
  @neighborhoodgearhead29582 жыл бұрын

  Thank you

• 
  @Poipounda0072 жыл бұрын

  That blue is awesome!

• 
  @neighborhoodgearhead29582 жыл бұрын

  Thanks

• 
  @jesusborrero33822 жыл бұрын

  I have 325i 2005 this valve no have connectiont to the intake

• 
  @draganraducu2 жыл бұрын

  you know you can remove the secondary air pump and the line that you installed without a problem. is an easy way . have a look on the net. good video.

• 
  @neighborhoodgearhead29582 жыл бұрын

  Thanks and yeah I'll definitely look into it

• 
  @marioycocoy20003 жыл бұрын

  Hey broo i have the same problem my car will start 2-3 times then if i go back and try to stared it up again everything will light up just like usual but nothing no crank no start and then the next day it will start like if didn’t have a problem any ideas anyone

• 
  @fatmanshoots76913 жыл бұрын

  Cats or no cats?

• 
  @neighborhoodgearhead29583 жыл бұрын

  Dogs 🤣I am just playing with catalytics