Another video I’ve watched says to use the dot for tdc not the dash ?
@Brochachichoppers18 күн бұрын
I did not use TDC, i used the advance mark. Also there’s difference through the years about what tdc and advance marks are. Best is to check your pushrods to make sure you are on tdc, and then either go to there or advance.
@mikezilick734128 күн бұрын
What latches the door to lock ?
@Brochachichoppers13 күн бұрын
The original door lock
@carbonEYE007Ай бұрын
What’s the advantage of the 2000i over this? Adjustment?
@Brochachichoppers18 күн бұрын
The 2000i has more curve settings. This one is just set and forget. I like things simple.
@BloodWarriorableАй бұрын
Nice! Thank you 👍🏻
@1Badbiker-lu3viАй бұрын
Godver , waarom start mijn 1973 FLH niet zo makkelijk met kickstart ? Heb er net een dynatek dyna-s ignition opgezet ! Loopt prachtig mooi maar ik dacht kicken moet ik nog uitzoeken hoe ? jij trapt hem aan zo makkelijk ! OKe ik heb wel een 9.5 compressie getunde 1200 cc engine maar toch ??? Kleppen gesteld , nieuwe bougies en kabels, carb. gecleaned etc. help me out man ! Fred
@RH-zm3ju2 ай бұрын
What length are your struts??
@OEFarredondo2 ай бұрын
Such a gnar set up, I love it
@talongunter77173 ай бұрын
I want to to a 05 Honda Odyssey touring Gullwing the sliders im having a lot of problems with electrical locks and cables
@dariomendoza1913 ай бұрын
mines a 1997 Astro van Conversion very similar to mine!! thanks for Sharing!!
@rodmanheffelfinger95114 ай бұрын
Quick question ⁉️ what about the Xtra white and pink wires? Mine has electric and kick start.
@Brochachichoppers4 ай бұрын
Other than the white and blue, There are no extra wires on a dual fire Dyna-S ignition.
@rodmanheffelfinger95114 ай бұрын
@@Brochachichoppers from the bike , there's a pink and a white wires . Pretty sure the white is to the battery but what about the other ?
@Brochachichoppers4 ай бұрын
@rodmanheffelfinger9511 I can’t help you with that unfortunately. Maybe the service manual can be of help if it still has original wiring?
@saimonperlini93124 ай бұрын
@@Brochachichoppers ciao ho fatto la stessa procedura nel mio shovelhead solo che la luce rimane sempre accesa anche ruotando la piastra va bene uguale?
@augieh61465 ай бұрын
I think this is the best looking one I’ve seen tonight
@Brochachichoppers4 ай бұрын
Thanks!
@PeteDiG5 ай бұрын
Does the door still latch the same?
@zjmorris16 ай бұрын
Did you do anything to the latch?
@travisharper74736 ай бұрын
Thank you for the videos on how you did these doors. Are you making the hinges for sale? If not, are those just hinges from Home Depot? Also what year is your van?
@shupshekitty7 ай бұрын
You have a suicide clutch and a jockey shift. No such thing as a suicide shift. I have a tank shift shovel. Prefer it to foot shift. Just feels more natural.
@Brochachichoppers6 ай бұрын
Potato Tomato
@OEFarredondo2 ай бұрын
Shift suicide
@Scummy_shovel7 ай бұрын
I Love this bike. That tank is sweet
@Brochachichoppers7 ай бұрын
Thanks!
@leviempringham37727 ай бұрын
Awesome video man, helped me alot. What oil tank are you using? Love that look
@Brochachichoppers7 ай бұрын
I made the stainless oil tank myself, thanks for watching!
@markblundell94617 ай бұрын
Fun times. There’s nothing so fun as riding a hardtail with yer buds.
@ianbarker2197 ай бұрын
Absolutely stunning shovelhead.. 🤘🏼✍🏻
@Brochachichoppers7 ай бұрын
Thanks!
@jaxj36267 ай бұрын
Did you have to change coil or does the points coil work with electric ignition.
@Brochachichoppers7 ай бұрын
You can use the 5ohm coil off your points system, but i already had the Dyna coil mounted.
@jaxj36267 ай бұрын
@Greenleafgarage ok just wondered as I know the ohms are different.
@zachspringer14134 ай бұрын
I'm trying to do this but I get the test light on full time and whe I turn the dial the light turns off what am I doing wrong its all aligned up to I'm lost
@Brochachichoppers4 ай бұрын
@@zachspringer1413 are you on the front cylinder compression stroke? You could be 180* off. Is your test light connected to the blue coil wire? Are you sure there’s no continuous 12v on your blue wire? (Continuous 12v should be connected to the white coil wire.
@victorauletta76997 ай бұрын
Good video. However, I’m not a fan of the Dyna Tech ignition. Points have been working fine for me for the last 50 years.
@Brochachichoppers7 ай бұрын
I used to be right there with you. But the “set and forget” with the Dyna-S is worth the buck for a daily. When you’re on the road, having points is just an unnecessary risk if you ask me.
@victorauletta76997 ай бұрын
Yeah, I just like the simplicity of points. I’ve had to change points out on the road but, they’ve always got me home. Ride safe my friend.
@johanleinders69128 ай бұрын
Dus ik koop me ook even terug een dyna S … elke keer first try …
@jameslaiola49768 ай бұрын
Great video Sir.
@captainhowdy6sic68 ай бұрын
And this works on any vehicle? Im thinkin bout doin this to a square body s10 blazer
@stableyetfun9 ай бұрын
This is not "Swapping out" a transmission. It is R&R removal and replacement. Good video anyway.
@scottfreeman52310 ай бұрын
How many hours?
@lpd1snipe11 ай бұрын
Dude, there ain't nothing special about it. I've been hand shifting, foot clutching it for 53 years. My regular ride is 1949 EL Panhead. Welcome to the old school world.
@Papinbrew11 ай бұрын
Any issues with rear shock length and rear brake line length?
@joewalton362411 ай бұрын
where did u buy the spring spacers from?
@VW5767 Жыл бұрын
Great mod to the side door!
@butchthurman4685 Жыл бұрын
Nice job. That makes me rethink a sliding door van.
@natemiller6389 Жыл бұрын
would duct tape work instead of zip ties?
@Ken-kb6yb Жыл бұрын
Wow good job 👍
@dennisreek9644 Жыл бұрын
Lekker bezig G's. Zonder licht altijd 5 punten!
@listentocky1 Жыл бұрын
Hell yeah el camino tambien
@mqnwest Жыл бұрын
Looks safe!
@markeez2373 Жыл бұрын
I have double cargo doors on the side. I want to weld them together and cut them in the lower third, so the smaller lower section will open like a tailgate and the top bigger section will open up like gullwing so I can side on the tailgate section. I need help?
@seanhiggins704 Жыл бұрын
I want to do gullwings on a car of mine, but I can't figure out the weathering side of things...overhead doors gonna need some rain channels and stuff. How does the van handle the rain?
@eljudge6 Жыл бұрын
Hi guys, nice video...wish I did the same on my '84 G30...wish I knew your rims size and if in front it didn't touch when you turn full direction? Thank you for your reply ... 🤘🤘...Stef
@Brochachichoppers11 ай бұрын
They’re 16x8” rims, no rubbing at all
@speedbob712 Жыл бұрын
Next time take the lower shock bolt out, lower ball joint with jack under control arm, drops out. Install the same way. Too many steps. Van looks great.
@Brochachichoppers11 ай бұрын
We tried, but the springs were too stiff with the liftblock attached to it.
@TheDBGOTH Жыл бұрын
Sounds like a old ambulance siren. Love it
@Brochachichoppers11 ай бұрын
Gotta love that whining sound of the old 4 speed trannies
@paulseddon1550 Жыл бұрын
Really good video. I’ve a Bedford rascal that I keep thinking about doing the same.
@Brochachichoppers11 ай бұрын
What’s keeping you from doing it?
@TXTUnz6 ай бұрын
Classic, I'm here because st90 carry van.
@TheHankerchief26 Жыл бұрын
I like this idea. Gonna do it on my 1992 Dodge Caravan. What did you end up doing for a door latch? I was thinking of getting a rear hatch door off another minivan and using the latch off that, but if you have a better idea, I'm all ears.
@Brochachichoppers11 ай бұрын
I planned on taking a latch out of a suburban tailgate. But never got to it and probably never will
@joewalton3624 Жыл бұрын
thats supercool, do you think i could take my barn doors and scrap em and then find a junkyard gullwing in do this?
@Brochachichoppers11 ай бұрын
Definitely! The gullwing will be 1/4inch too wide but you can cut a little bit of the edge and make it fit
@Braapstar219 Жыл бұрын
How do you even ride on down/uphill if you needed to stop and go
@Brochachichoppers11 ай бұрын
Hence the name suicide shift
@davidsurdam2634 Жыл бұрын
How did you make the old sliding cover clear when opening door
@Brochachichoppers11 ай бұрын
We notched it on the top side
@ColtonLoberg Жыл бұрын
What about the flex plate bolts could you explain what you did there
@brianmcneal4764 Жыл бұрын
Hey man this is great! What’s the length of the gas strut?
@Brochachichoppers Жыл бұрын
I’m not sure about the total length but the stroke is 15-3/4” (or 400mm)
@tightmike4945 Жыл бұрын
Two "very" helpful videos! I'm a do-it-your-selfer, I now know enough to get her done, THANKS!
@Brochachichoppers Жыл бұрын
Thanks for watching, and good luck with your build!!
@rmsyster Жыл бұрын
Goed bezig ik ben ook van plan om een van te kopen!
@Brochachichoppers11 ай бұрын
Zeker doen! Die met de gullwing in onze andere video staat te koop!
@rmsyster11 ай бұрын
@@Brochachichoppers zodra ik er 1 heb neem ik contact met jullie op!
Пікірлер
Another video I’ve watched says to use the dot for tdc not the dash ?
I did not use TDC, i used the advance mark. Also there’s difference through the years about what tdc and advance marks are. Best is to check your pushrods to make sure you are on tdc, and then either go to there or advance.
What latches the door to lock ?
The original door lock
What’s the advantage of the 2000i over this? Adjustment?
The 2000i has more curve settings. This one is just set and forget. I like things simple.
Nice! Thank you 👍🏻
Godver , waarom start mijn 1973 FLH niet zo makkelijk met kickstart ? Heb er net een dynatek dyna-s ignition opgezet ! Loopt prachtig mooi maar ik dacht kicken moet ik nog uitzoeken hoe ? jij trapt hem aan zo makkelijk ! OKe ik heb wel een 9.5 compressie getunde 1200 cc engine maar toch ??? Kleppen gesteld , nieuwe bougies en kabels, carb. gecleaned etc. help me out man ! Fred
What length are your struts??
Such a gnar set up, I love it
I want to to a 05 Honda Odyssey touring Gullwing the sliders im having a lot of problems with electrical locks and cables
mines a 1997 Astro van Conversion very similar to mine!! thanks for Sharing!!
Quick question ⁉️ what about the Xtra white and pink wires? Mine has electric and kick start.
Other than the white and blue, There are no extra wires on a dual fire Dyna-S ignition.
@@Brochachichoppers from the bike , there's a pink and a white wires . Pretty sure the white is to the battery but what about the other ?
@rodmanheffelfinger9511 I can’t help you with that unfortunately. Maybe the service manual can be of help if it still has original wiring?
@@Brochachichoppers ciao ho fatto la stessa procedura nel mio shovelhead solo che la luce rimane sempre accesa anche ruotando la piastra va bene uguale?
I think this is the best looking one I’ve seen tonight
Thanks!
Does the door still latch the same?
Did you do anything to the latch?
Thank you for the videos on how you did these doors. Are you making the hinges for sale? If not, are those just hinges from Home Depot? Also what year is your van?
You have a suicide clutch and a jockey shift. No such thing as a suicide shift. I have a tank shift shovel. Prefer it to foot shift. Just feels more natural.
Potato Tomato
Shift suicide
I Love this bike. That tank is sweet
Thanks!
Awesome video man, helped me alot. What oil tank are you using? Love that look
I made the stainless oil tank myself, thanks for watching!
Fun times. There’s nothing so fun as riding a hardtail with yer buds.
Absolutely stunning shovelhead.. 🤘🏼✍🏻
Thanks!
Did you have to change coil or does the points coil work with electric ignition.
You can use the 5ohm coil off your points system, but i already had the Dyna coil mounted.
@Greenleafgarage ok just wondered as I know the ohms are different.
I'm trying to do this but I get the test light on full time and whe I turn the dial the light turns off what am I doing wrong its all aligned up to I'm lost
@@zachspringer1413 are you on the front cylinder compression stroke? You could be 180* off. Is your test light connected to the blue coil wire? Are you sure there’s no continuous 12v on your blue wire? (Continuous 12v should be connected to the white coil wire.
Good video. However, I’m not a fan of the Dyna Tech ignition. Points have been working fine for me for the last 50 years.
I used to be right there with you. But the “set and forget” with the Dyna-S is worth the buck for a daily. When you’re on the road, having points is just an unnecessary risk if you ask me.
Yeah, I just like the simplicity of points. I’ve had to change points out on the road but, they’ve always got me home. Ride safe my friend.
Dus ik koop me ook even terug een dyna S … elke keer first try …
Great video Sir.
And this works on any vehicle? Im thinkin bout doin this to a square body s10 blazer
This is not "Swapping out" a transmission. It is R&R removal and replacement. Good video anyway.
How many hours?
Dude, there ain't nothing special about it. I've been hand shifting, foot clutching it for 53 years. My regular ride is 1949 EL Panhead. Welcome to the old school world.
Any issues with rear shock length and rear brake line length?
where did u buy the spring spacers from?
Great mod to the side door!
Nice job. That makes me rethink a sliding door van.
would duct tape work instead of zip ties?
Wow good job 👍
Lekker bezig G's. Zonder licht altijd 5 punten!
Hell yeah el camino tambien
Looks safe!
I have double cargo doors on the side. I want to weld them together and cut them in the lower third, so the smaller lower section will open like a tailgate and the top bigger section will open up like gullwing so I can side on the tailgate section. I need help?
I want to do gullwings on a car of mine, but I can't figure out the weathering side of things...overhead doors gonna need some rain channels and stuff. How does the van handle the rain?
Hi guys, nice video...wish I did the same on my '84 G30...wish I knew your rims size and if in front it didn't touch when you turn full direction? Thank you for your reply ... 🤘🤘...Stef
They’re 16x8” rims, no rubbing at all
Next time take the lower shock bolt out, lower ball joint with jack under control arm, drops out. Install the same way. Too many steps. Van looks great.
We tried, but the springs were too stiff with the liftblock attached to it.
Sounds like a old ambulance siren. Love it
Gotta love that whining sound of the old 4 speed trannies
Really good video. I’ve a Bedford rascal that I keep thinking about doing the same.
What’s keeping you from doing it?
Classic, I'm here because st90 carry van.
I like this idea. Gonna do it on my 1992 Dodge Caravan. What did you end up doing for a door latch? I was thinking of getting a rear hatch door off another minivan and using the latch off that, but if you have a better idea, I'm all ears.
I planned on taking a latch out of a suburban tailgate. But never got to it and probably never will
thats supercool, do you think i could take my barn doors and scrap em and then find a junkyard gullwing in do this?
Definitely! The gullwing will be 1/4inch too wide but you can cut a little bit of the edge and make it fit
How do you even ride on down/uphill if you needed to stop and go
Hence the name suicide shift
How did you make the old sliding cover clear when opening door
We notched it on the top side
What about the flex plate bolts could you explain what you did there
Hey man this is great! What’s the length of the gas strut?
I’m not sure about the total length but the stroke is 15-3/4” (or 400mm)
Two "very" helpful videos! I'm a do-it-your-selfer, I now know enough to get her done, THANKS!
Thanks for watching, and good luck with your build!!
Goed bezig ik ben ook van plan om een van te kopen!
Zeker doen! Die met de gullwing in onze andere video staat te koop!
@@Brochachichoppers zodra ik er 1 heb neem ik contact met jullie op!