If you’re going to continue to make repair videos you REALLY need your get a voltage meter. You’ll be able to test connections and components before putting r everything back to gather and attempting to see if it works by pulling the cord. There are plenty of professional, experienced videos that you can copy.
@philliphall5198Күн бұрын
I have socked the oring in brake fluid and installed it, worked fine most of the time 😮
@Gr8teWyteThangКүн бұрын
Bro I have a riding mower you can use for a demonstration!!!! I can't get it going 😮
@alexkrone6622Күн бұрын
Fact
@gore5542401Күн бұрын
Thanks this is the best video regarding valve gaps. Keep up the good work!!!
@HammerWrenchКүн бұрын
🤣🛠️
@williamwelch7Күн бұрын
You would have to go there 4 times a day, every day of the year...not buying it, Fake news. 1400 divided by 12 is 116.666666666... I think I know who wrote this story
@headpainter1Күн бұрын
Wait, I'm left-handed you messed me all up. Do I use my right nipple or my wife's nipple. Lol.. great video. Mine was three and a half feet long and it seemed a little short. You going to do another video on what diameter and type of rope to use?
@RepairGangКүн бұрын
Yeah, I'm probably going to rework this video and include many different machines
@headpainter1Күн бұрын
@@RepairGang I know I have been to the hardware store and found some rope that seemed like it would work but you know there's some that's more UV resistant and a better abrasion wearing type. That would be a great one to put out. Thanks a lot!
@williamkniesly50902 күн бұрын
Why wouldn"t you put fresh in it if you are not sure if the gas is any good?
@RepairGang2 күн бұрын
@@williamkniesly5090 because it didn't fail the smell test
@bizobb2 күн бұрын
The last time my mower acted like this it cost me a repair bill and the cost to rent a mower. She's purring like a kitten now! Note: I was able to do this without disconnecting the throttle and choke lines.
@LHLWASRIGHT2 күн бұрын
Why did you not record this in better light?
@RepairGang2 күн бұрын
@@LHLWASRIGHT I was trying to get it and failed my newer videos have better loght
@williambrown33883 күн бұрын
Commercial loggers and tree trimmers will never use exclusively battery powered saws and trimmers.
@brianfuerst94913 күн бұрын
Really good explanation, very helpful, good insight, makes sense. This might be an exception: I would think that if the timing is off or too advanced, meaning it prefires before the intake valve closes, (if that is even possible with today's smaller engines), a misfire occurs? (Comments are appreciated.)
@brianfuerst94913 күн бұрын
Congratulations on the 1M mark!
@philliphall51983 күн бұрын
My personal use I rebuild them but for other people it’s new one
@danashby95974 күн бұрын
I've had Briggs and Stratton engines all my mowing life! Always add stabilizer, never had to open a carburetor? I don't understand all this stuff, maintenance routine, I've always been good to go!
@IMJUSTHERE9564 күн бұрын
So I tried doing this without the video from memory from 2 weeks ago of watching. I unbolted the wrong thing and liquid came out for the same area. What do I refill it with thanks
@IMJUSTHERE9563 күн бұрын
?
@AlexanderClark2144 күн бұрын
After I replace the carburetor, it only runs at half a choke. Any suggestions?
@giantd5 күн бұрын
saved our day, thx. I was ready to go buy another generator.
@2dollar825 күн бұрын
I've been fixing so many friends small engine machines lately I think I've decided to start a business, I have all the tools and know how. What's the best way to start branching out getting customers? I was thinking of starting with a fbook page and getting business cards out there.. what do you think?
@No.15mining5 күн бұрын
Would love to see the tool list great video.
@karenrunnels90825 күн бұрын
Thanks for this. I’m in Houston after supposedly Cat 1 Hurricane Beryl left millions of Centerpoint & Entergy customers without electricity. My Guardian 24kW has been running continuously for four days. I’m having trouble getting it serviced since demand is so high. Entergy says four more days until my power is back on, so I might need to add oil to my unit, myself. I have zero mechanical experience. Do I need to change the filter, too?
@scotta84946 күн бұрын
Thank you so much!!! I was given a Ford FG2200IS generator that wasn't running. After cleaning the jets, this thing runs super smooth now!!! We missed cleaning the high output originally and your video helped diagnose it and solved the surging issue.
@MrJohnnyb426 күн бұрын
95% of my jobs is replacing carbs
@MrJohnnyb426 күн бұрын
I have been fired from an Ace Hardware where i ran and managed a Stihl "Silver certified" department along with small engine service. The reason i got fired is the owner could not afford to pay me. I am on my own now, but business is very bad. I live in a small town and people that i know that have done this for years have seen their business lose by 47%. And this is in northwestern Pa.
@bowtiebuilding6 күн бұрын
What if the generator is only 3 years old and I had just run it a few months prior with no issues?
@harborfreight7 күн бұрын
The CO shutoff system is a critical safety feature which can help to prevent the risk of sudden illness and death resulting from the accumulation of undetected CO, which is an odorless, colorless gas impossible for the human senses to detect. The health and safety of our customers remains our top priority and we recommend discontinuing any use of this product without a functioning CO shutoff system.
@pedrotamez14227 күн бұрын
Thanks to you I fix my generator!!
@chuckhuff71237 күн бұрын
Bullshit
@RepairGang7 күн бұрын
About what
@kainhall7 күн бұрын
i had a dude beat on the fuel PSI regulator on a GM TBI with a rock.... . he thought it was a carb..... and that was the float. . he got an education when i had to replace the whole TBI because he cracked the housing..... wasnt cheap!
@BigMac22227 күн бұрын
Clogged pilot jet 99% of the time.
@gunsncars4697 күн бұрын
You only got it to run becase you sprayed the top of the gas cap 😂😂😂
@fstcbra7 күн бұрын
i owe you a beer
@RepairGang7 күн бұрын
@@fstcbra I will take it
@Rehanna-iy7rj7 күн бұрын
Hi, repair Gang, how about the review video about ULiXWH jump starter with air compressor. It has been sooo long, sir
@user-ov8pl8sk2s7 күн бұрын
Your a genius
@KrisKlein-r3e7 күн бұрын
Thank you it worked!, I was ready to give up. I even put the carberator in a ultrasonic cleaner twice and that did not work.
@RichsMowersNBlowers8 күн бұрын
Wait what...pshhhh
@ryanw16398 күн бұрын
Worked on a John Deere riding mower and the guy tried to take the blades off and rounded the bolt. So I had to fix it. Lucky I know an old union metal worker and he torched the bolt to get it off. Looks like I need to invest in an acetylene torch.
@GmKofHard7 күн бұрын
Just get a nut cutter. It will safely cut the stripped nut without damaging the threads nor the bearings. When using heat that close to the bearing on the spindle it can damage the bearings which means you'll have to replace the spindle as well.
@ryanw16397 күн бұрын
@@GmKofHard it was a bolt or I would of. Luckily I unbolted it and slid out the shaft. It was an older JD LT133 to be exact.
@rodneymiddleton96248 күн бұрын
Nice job!
@baldeagle2428 күн бұрын
🤦🏻That’s a first. Recoil starter spray.
@robertmailhos81598 күн бұрын
Spraying carburetor cleaner in the recoil starter 😂
@jaytee6218 күн бұрын
What f@%*%+; retard. Waste of time
@Barracuda480828 күн бұрын
Was thet magneto US made? Not. No reinforcement behind 1/4" tang to push sideways...should have been vertical tang and flag style connector..warranty ! That was one of my jobs, Quality Control, inspector, R&D tests. I quit because fighting city hall to correct an obvious design issue was a pain and stepped on toes of the design engineer.. all about bonus incentives. Now that fourty years have past, people injured or worse, I still see major cheap flaws in my current job at a component level..design obsolescence. . Still about the $ Maybe the foreign designed part may have seen that flaw and changed it with an included pigtail lead extension . SMH
@RichsMowersNBlowers8 күн бұрын
Andrew shut that off. You will burn up the pump. I want to see them spray carb cleaner in there that is funny. Get them fixed.
@Lee-tv2jf8 күн бұрын
Much appreciated ✊🏾
@ch4tterbox2638 күн бұрын
Mine is overflowing. I set the needle right. I hope lolol. But it keep leaking out of the top right hole where the choke gasket is. Any idea on what I'm doing wrong
@baldeagle2429 күн бұрын
You’re up late! 😁👍
@jesusvazquez56119 күн бұрын
Thanks for the video. It helped me service my unit. It was a pain but mostly my fault, i lost the spring that connects the step motor. I improvised and got it running again.
@bennetthicks59749 күн бұрын
You hit the nail squarely on the head!! My generator is back running like new. Thanks so much for the info!! Liked & Subscribed!!
@zacherysam9 күн бұрын
Thanks saved me time and money. I was looking online at coils
Пікірлер
If you’re going to continue to make repair videos you REALLY need your get a voltage meter. You’ll be able to test connections and components before putting r everything back to gather and attempting to see if it works by pulling the cord. There are plenty of professional, experienced videos that you can copy.
I have socked the oring in brake fluid and installed it, worked fine most of the time 😮
Bro I have a riding mower you can use for a demonstration!!!! I can't get it going 😮
Fact
Thanks this is the best video regarding valve gaps. Keep up the good work!!!
🤣🛠️
You would have to go there 4 times a day, every day of the year...not buying it, Fake news. 1400 divided by 12 is 116.666666666... I think I know who wrote this story
Wait, I'm left-handed you messed me all up. Do I use my right nipple or my wife's nipple. Lol.. great video. Mine was three and a half feet long and it seemed a little short. You going to do another video on what diameter and type of rope to use?
Yeah, I'm probably going to rework this video and include many different machines
@@RepairGang I know I have been to the hardware store and found some rope that seemed like it would work but you know there's some that's more UV resistant and a better abrasion wearing type. That would be a great one to put out. Thanks a lot!
Why wouldn"t you put fresh in it if you are not sure if the gas is any good?
@@williamkniesly5090 because it didn't fail the smell test
The last time my mower acted like this it cost me a repair bill and the cost to rent a mower. She's purring like a kitten now! Note: I was able to do this without disconnecting the throttle and choke lines.
Why did you not record this in better light?
@@LHLWASRIGHT I was trying to get it and failed my newer videos have better loght
Commercial loggers and tree trimmers will never use exclusively battery powered saws and trimmers.
Really good explanation, very helpful, good insight, makes sense. This might be an exception: I would think that if the timing is off or too advanced, meaning it prefires before the intake valve closes, (if that is even possible with today's smaller engines), a misfire occurs? (Comments are appreciated.)
Congratulations on the 1M mark!
My personal use I rebuild them but for other people it’s new one
I've had Briggs and Stratton engines all my mowing life! Always add stabilizer, never had to open a carburetor? I don't understand all this stuff, maintenance routine, I've always been good to go!
So I tried doing this without the video from memory from 2 weeks ago of watching. I unbolted the wrong thing and liquid came out for the same area. What do I refill it with thanks
?
After I replace the carburetor, it only runs at half a choke. Any suggestions?
saved our day, thx. I was ready to go buy another generator.
I've been fixing so many friends small engine machines lately I think I've decided to start a business, I have all the tools and know how. What's the best way to start branching out getting customers? I was thinking of starting with a fbook page and getting business cards out there.. what do you think?
Would love to see the tool list great video.
Thanks for this. I’m in Houston after supposedly Cat 1 Hurricane Beryl left millions of Centerpoint & Entergy customers without electricity. My Guardian 24kW has been running continuously for four days. I’m having trouble getting it serviced since demand is so high. Entergy says four more days until my power is back on, so I might need to add oil to my unit, myself. I have zero mechanical experience. Do I need to change the filter, too?
Thank you so much!!! I was given a Ford FG2200IS generator that wasn't running. After cleaning the jets, this thing runs super smooth now!!! We missed cleaning the high output originally and your video helped diagnose it and solved the surging issue.
95% of my jobs is replacing carbs
I have been fired from an Ace Hardware where i ran and managed a Stihl "Silver certified" department along with small engine service. The reason i got fired is the owner could not afford to pay me. I am on my own now, but business is very bad. I live in a small town and people that i know that have done this for years have seen their business lose by 47%. And this is in northwestern Pa.
What if the generator is only 3 years old and I had just run it a few months prior with no issues?
The CO shutoff system is a critical safety feature which can help to prevent the risk of sudden illness and death resulting from the accumulation of undetected CO, which is an odorless, colorless gas impossible for the human senses to detect. The health and safety of our customers remains our top priority and we recommend discontinuing any use of this product without a functioning CO shutoff system.
Thanks to you I fix my generator!!
Bullshit
About what
i had a dude beat on the fuel PSI regulator on a GM TBI with a rock.... . he thought it was a carb..... and that was the float. . he got an education when i had to replace the whole TBI because he cracked the housing..... wasnt cheap!
Clogged pilot jet 99% of the time.
You only got it to run becase you sprayed the top of the gas cap 😂😂😂
i owe you a beer
@@fstcbra I will take it
Hi, repair Gang, how about the review video about ULiXWH jump starter with air compressor. It has been sooo long, sir
Your a genius
Thank you it worked!, I was ready to give up. I even put the carberator in a ultrasonic cleaner twice and that did not work.
Wait what...pshhhh
Worked on a John Deere riding mower and the guy tried to take the blades off and rounded the bolt. So I had to fix it. Lucky I know an old union metal worker and he torched the bolt to get it off. Looks like I need to invest in an acetylene torch.
Just get a nut cutter. It will safely cut the stripped nut without damaging the threads nor the bearings. When using heat that close to the bearing on the spindle it can damage the bearings which means you'll have to replace the spindle as well.
@@GmKofHard it was a bolt or I would of. Luckily I unbolted it and slid out the shaft. It was an older JD LT133 to be exact.
Nice job!
🤦🏻That’s a first. Recoil starter spray.
Spraying carburetor cleaner in the recoil starter 😂
What f@%*%+; retard. Waste of time
Was thet magneto US made? Not. No reinforcement behind 1/4" tang to push sideways...should have been vertical tang and flag style connector..warranty ! That was one of my jobs, Quality Control, inspector, R&D tests. I quit because fighting city hall to correct an obvious design issue was a pain and stepped on toes of the design engineer.. all about bonus incentives. Now that fourty years have past, people injured or worse, I still see major cheap flaws in my current job at a component level..design obsolescence. . Still about the $ Maybe the foreign designed part may have seen that flaw and changed it with an included pigtail lead extension . SMH
Andrew shut that off. You will burn up the pump. I want to see them spray carb cleaner in there that is funny. Get them fixed.
Much appreciated ✊🏾
Mine is overflowing. I set the needle right. I hope lolol. But it keep leaking out of the top right hole where the choke gasket is. Any idea on what I'm doing wrong
You’re up late! 😁👍
Thanks for the video. It helped me service my unit. It was a pain but mostly my fault, i lost the spring that connects the step motor. I improvised and got it running again.
You hit the nail squarely on the head!! My generator is back running like new. Thanks so much for the info!! Liked & Subscribed!!
Thanks saved me time and money. I was looking online at coils
I almost bought a coil to
Can you move the camera around a little more?
@@jeffreytuttle8825 I apologize