Hi every1... Welcome to the channel here you will find different videos of projects on cars hot wheels and rc cars and lowriders and some how to. I hope you njoy
Bro, that's brilliant. Do the step by step videos. I have a 64 and a 63 I want to do 👏 👏 👏 👏 keep up the amazing work
@XGODWORXАй бұрын
Thank you bro.. I appreciate for stopping by...
@eriklopez6906Ай бұрын
@@XGODWORX yeah bro I want to learn a little more about it if it's possible
@Angel-xp4lpАй бұрын
how did u do the monte carlo????
@XGODWORXАй бұрын
The monte, I did the ubar method and just did the rear end with on servo.
@youcantstopme5136Ай бұрын
At 2:23 in the video what part is that called
@XGODWORXАй бұрын
That's a rivet I got that at home depot...
@youcantstopme5136Ай бұрын
@@XGODWORX oh ok thank you.....nice work by the way I just wanna raise the back up and make it look good
@XGODWORXАй бұрын
@youcantstopme5136 thank you I appreciate you stopping by and letting me know of any questions you may have...
@youcantstopme5136Ай бұрын
@@XGODWORX I went and got the mechanical pencil it says #2 0.7mm is that the right size?
@youcantstopme5136Ай бұрын
@@XGODWORX did I get the right size?
@jimmyYa0Ай бұрын
Absolutely amazing my friend… you need to be recognized for this awesome project… I hope you are still building.. you are so talented.. I am absolutely loving this project…
@XGODWORXАй бұрын
Thank you I appreciate the kind words... they do mean alot.. thank you
@5150RidezАй бұрын
Bro I need one of those, please do a tutorial video 🔥💯👊🏿👏🏿
@jayypeezy36Ай бұрын
The part u made so paper clip can slide threw in ...what did you use to make it brotha?🙏
@XGODWORXАй бұрын
On that part I used a piece from a servo Horn and glued it on the upper A arm to extend it.
@jayypeezy36Ай бұрын
@@XGODWORX damn bro u a lifesaver! 👍🙏 💯
@XGODWORXАй бұрын
@jayypeezy36 no problem, I apologize for not pointing that out on the video...
@jayypeezy36Ай бұрын
How did u run u bar to the motor infront?...im confused...do u have motor rite under u bar? I cant really tell brotha how ur running the string can u help 🙏..im doing the cutlass also
@XGODWORXАй бұрын
On this build I put the hopping micro motor right under the U bar. I had to build a section under the chassis to hold the motor.
@XGODWORXАй бұрын
On this build I used the micro motor and installed it right under the u bar. I just had to build a section under the chassis to hold the motor.
@jayypeezy36Ай бұрын
@@XGODWORX can I run a small dc motor? Will it work? Like the ones from a rc boss?
@jayypeezy36Ай бұрын
Can i run a small dc motor? Will it work? Like the ones from a rc ?
@jayypeezy36Ай бұрын
Will a little dc motor work to make it hop?like the ones from a rc?
@XGODWORXАй бұрын
Yes bro those would work great...
@jayypeezy36Ай бұрын
@@XGODWORXthanks brotha for reply 👍🙏 wasn't sure if there powerful like the regular size johnson motors brotha!
@jayypeezy362 ай бұрын
Can u do this on molded bottom ones?
@XGODWORX2 ай бұрын
I believe so... but ima have to check on that.
@jayypeezy362 ай бұрын
@@XGODWORX thanks bro I'm trying to do the 65 riviera the amt one brotha 1/25 scale...if u can help me man ill gladly appreciate it bro 🙏👍
@jayypeezy36Ай бұрын
? Anything brotha
@XGODWORXАй бұрын
@jayypeezy36 hey, I apologize for the late reply.. I look into a crown vic model. You would have to build the suspension tower. I had to use the u bar method on my crown vic.
@jayypeezy36Ай бұрын
@@XGODWORX thanks brotha appreciate the reply man 🙏🙏
@gabescustoms8182 ай бұрын
That’s sick
@jayypeezy362 ай бұрын
Yooo bro i need ur help man...on a hoppin hydro front and back setup
@XGODWORX2 ай бұрын
Hey what's going in brother, what can I help you with.
@jerryalvarez17132 ай бұрын
That’s bad ass
@marlonadams972 ай бұрын
Where can I buy this set up
@jayypeezy362 ай бұрын
How to make wheels roll brotha? My son likes to roll them
@southwest67203 ай бұрын
Nice video n setup..ive been tryna get back into building modes wit hydros again after 30 yrs
@southwest67203 ай бұрын
Models*
@jerryalvarez17133 ай бұрын
You sell them ?
@rodrigosaldana80543 ай бұрын
cual es su precio bro?
@XGODWORX3 ай бұрын
Estoy asiendo kits. AL momento Para los carros... y voy a dar este carro un raffle Para mis sigidores. Pero voy a ser un anunsio primero..
@jeremyholley56613 ай бұрын
How do I buy from you
@steveoblessed87053 ай бұрын
Nice work man
@williammauricio23643 ай бұрын
Hello these kits available for sale still
@XGODWORX3 ай бұрын
No, it was a lil joke commercial. But ima start making them and I'll post them up
@George-pp2hr4 ай бұрын
Thats great. Love the Bob Ross commentary. Thats really nice. Interesting Corsair model.👍✌️🇭🇲🦘🐨
@XGODWORX2 ай бұрын
Glad you enjoyed it, ur the best
@George-pp2hr2 ай бұрын
@@XGODWORX Yes I did enjoy that the kit is very nice and I'm a big fan of Bob Ross. So when I heard that I thought what that's great naration of of a wonderful painter. From Melbourne Victoria Australia.Good on ya!👍🇭🇲🦘🐨✌️
@XGODWORX4 ай бұрын
Awesome story... thank you for sharing
@laff0004 ай бұрын
I know. It's like what are the chances.
@laff0004 ай бұрын
I once worked in a toy store. In the front of the store there were several ww2 models on display. One evening a gentleman approached me and asked me about buying a B17 and he pointed to the one that we had on display. I said we have them down in the model aisle. He said "No" I want to buy that one on disply. I told him that those displays were built by customers and that they belonged to them. He said I need to buy this one. Well long story short two days later the builder of the B17 came in and sold the gentleman the plane. I then asked him why did you have to buy this specific plane? He teared up and said. " This is my plane" . You see son I flew this exact plane in WW2. He showed us a photo of him and his crew in front of a B17 with the exact same personalized paint job as the one on display in our store. He then asked the builder of the model what possessed him to use this paint scheme. He said that he wanted to paint an authentic B17, so he went to the library and found some books and found a picture of his plane. He GAVE the guy the plane. He said that it was an honor to be part of this guys history. He settled on a beer at the bar down the street.
@George-pp2hr2 ай бұрын
That's a wonderful story and very touching. That would be an honour to have built this Aircraft and a veteran to stumbled at that moment to ask for it. Great to the builder of the B-17 model. That is really great.👍🇭🇲🦘🐨✌️
@paulsmodels4 ай бұрын
what is a "ur" ?
@XGODWORX4 ай бұрын
Hello. "Ur" means "yours" I hope this helps
@XGODWORX2 ай бұрын
I apologize "UR" means "yours"... I hope that helps.. 🙏
@dradden15564 ай бұрын
I found that the 2 blade prop gives it a more aggressive flight control ability. Not sure if I'm wrong on that cause I just started with planes .
@XGODWORX4 ай бұрын
That's cool... I'm learning myself. I'm going to have to check it out trying the other props.
@user-nh1gh7qn5t4 ай бұрын
Nice
@isaacmorehead81704 ай бұрын
hey tony, isaac here love your vids bro i need help making a hopper model car
@XGODWORX4 ай бұрын
Thank you Isaac, I appreciate you brother. Yes for sure. Ima be making a parts list video for the lowrider more in detail.
@isaacmorehead81704 ай бұрын
bro i got everything from your list you made @@XGODWORX
@isaacmorehead81704 ай бұрын
i love the model lowriders, you should see what im starting, im wanting to make a van for my first one. i have the ecu and two motors from small rc car stripperd down front back left right and it has lights i want to put under it. i also have a small bluetooth speaker for it. after i figure out how to make it hop, i have two kits from hoppin hydros, the two motor kit and the 4 motor kit, id like to talk with you about the string, mine just gets bound up and wont hop @@XGODWORX
@XGODWORX4 ай бұрын
Thats so cool bro. I cant wait to see it in action...@isaacmorehead8170
@jerryalvarez17134 ай бұрын
You sell them ?
@XGODWORX4 ай бұрын
Thank u for stopping by. I don't sell them. I do have friends ask me to build their own models, I was thinking of doing a give a way on a one of my models. So stay tuned for that. Have a great day.
@pmonster-vi3ft4 ай бұрын
song ??
@jaybee11584 ай бұрын
Where u find the car to take the pc board out I fig it’s a real cheap dollar tree type car or is there a preference you like ?? I made one to drive like a regular RC but didn’t think to do the bounce so you just gave me a great idea thank you for that. Only problem as u well know there’s not enough room for all that in a small frame it’s not like those badass 300 $ RC’s . I appreciate your videos la neta you just got a new subscriber..
@XGODWORX4 ай бұрын
Thank you so much brother.. I really appreciate it, I'm glad that I can share these ideas to the rest of the community and all grow and learn, those are from a cheapy rc from the 99c store but any works. I can't wait to see what you come up with. Have a great day
@jaybee11584 ай бұрын
@@XGODWORX thank you bro GOD BLESS , when I saw your videos in comparison to others that I’ve seen they don’t explain very well , the lighting and either video or pics they try sharing it’s like you can’t make it out what exactly there doing.. like I just binged watching some of your videos by the way nice art skills tambien; you know what they say and 90% of people don’t know the whole quote but just like myself your a “Jack of all trades master of none, though often times better than master of one. And I enjoy being multi-passionate.” (That’s the whole quote ) I have my hands into a lot of diff stuff I really enjoy being an artist and fixing things. So I’m really going to try and rewatch again from beginning to end how you linked everything up. Like I said I only did like an RC thing to drive it but when I wanted to try doing the hydros I bought a lot of stuff from the store and as I was getting ready I got stuck bcuz like I said earlier the video and frame work for pics wasn’t good and when I tried to hit them up threw here they didn’t respond so I went on trying to figure it out and then I started with other videos and I got frustrated bcuz the way I was doing it didn’t compare right with the others videos Id have to start from scratch.. But now stumbled here you have actually better video you explain why and what your opinions and recommendations of what to do or if they prefer another way. You showed the lil ball joints and explained about what and why that you need one in the tube glued and the one next loose so basically your cutting on the link to of the lil balls . The other videos don’t say anything so it was confusing. Not to mention your way actually is money savor and using just paper clips the others went more elaborate and I’m like 🤦🏽.. so I have a lot of these model cars I’ve never touched so I’m just gonna pic maybe one of my “G-Bodies” or maybe “ 65 impala” I want to do one with a lot of room . Bcuz if I’m going to put 2 chips and to make it move there’s basically a drive shaft connected I have to mod in order to do so and that’s one reason it was hard to fit everything in one body I had to cut inside where the seats would be so basically I had to have the car that u can’t see the “interior “ but I just bought some small blankets that can be put into the cars so I’m trying to figure out how to do this all with lil room .. so hopefully if I run into something I can just hit u up then when I’m fully done maybe send a personal video so you can see the inspiration you gave … much respect homie
@XGODWORX4 ай бұрын
@jaybee1158 that is super cool brother, I just finished reading ur thoughts, I'm very grateful to be able to inspire. I'm working on a 59 elco I put a rear diff and hydros on the back just working on the front. I'll post a video soon ... Maybe we can come up with more ideas.. ur the best and I can't wait to see ur work...
@jayypeezy36Ай бұрын
How did u make one drive brotha?
@FYIY-_-4 ай бұрын
Have much I want one. I haven't seen one of those Middle school. Let me know
@joshcarrillo89305 ай бұрын
Can someone help me it only hopps once and I put Vaseline on it already
@XGODWORX5 ай бұрын
Check if ur string is getting snagged some where or that ur string has enough space between the motor and the pinion gear on the shaft of the motor so it can unwind. Hope this helps... 🙏
@aaronmiller79545 ай бұрын
Please don't ever spell your name like that😮
@aaronmiller79545 ай бұрын
Love how you made each rear wheel independent but kept it to one motor
@aaronmiller79545 ай бұрын
I'm very impressed with the rear setup. Super clean work
@XGODWORXАй бұрын
Thank you, I appreciate you checking my work... I apologize for the late reply. I hope all is well...
@aaronmiller79545 ай бұрын
You can replace interior with motors and do tinted windows to hide them
@XGODWORX5 ай бұрын
That's what I did first, but I challenged myself and this came out good. I was surprised It worked out...
@aaronmiller79545 ай бұрын
We would find the smallest motors possible and wire one to each wheel and make a switch box . But some models don't have enough room for 4 motors so we would do 1 front and 1 back
@jerryalvarez17135 ай бұрын
Thank you love it
@jerryalvarez17135 ай бұрын
You sell them ?
@smithgroove9455 ай бұрын
Doesn't the string on the motor wind itself up tight?
@XGODWORX5 ай бұрын
It does, you can use Vaseline on the string To help it from winding up. And once the car comes down it unwinds itself. Hope this helps
@smithgroove9455 ай бұрын
@@XGODWORX Thanks, yep I was starting to figure that out. I must try this for sure.
@jerryalvarez17135 ай бұрын
How much , I’ll buy it for my son
@XGODWORX5 ай бұрын
I apologize it's just a lil fun carmercial, nothing is for sale.
@tenariusmccullough24035 ай бұрын
What's up I have question Where did you get the spring from that your using in the front of the model to hop car . ?
@XGODWORX5 ай бұрын
G2 pens
@jerryalvarez17136 ай бұрын
If you sell them like this , let me know , just had to watch this video a few times. Awesome
Пікірлер
sick. i love to fly mine
Hey can you please do one on the Revell 65 impala cause I want to do one on it if you can please🙏
OK I'll try to find a 65 it's my favorite impala too..
@@XGODWORX alright thanks bro
Wicked
How do i get it to hop higher do i need weight in back im doin u bar in front... Or do i need a stronger motor?
Use some weight or stronger battery would work too..
@@XGODWORX thanks brotha 👍🙏
Can u show how u build them too drive boss?🙏🙏🙏
Sounds good... will do...
@@XGODWORX thanks man will be looking forward too see brotha 👍🙏
@@XGODWORX 🙏🙏🙏
What size is the Mechanical pencil I got 0.7mm and it's way to big
How did u make them rc? Can u show step by step🙏
Check out my my 61 build. It's part 7 I think..
@@XGODWORX too drive boss?
kzread.info/dash/bejne/pJaTzceHdqqxhbA.htmlsi=tjfLNXW0C75-rLMj
@@XGODWORX too drive brotha
Bro, that's brilliant. Do the step by step videos. I have a 64 and a 63 I want to do 👏 👏 👏 👏 keep up the amazing work
Thank you bro.. I appreciate for stopping by...
@@XGODWORX yeah bro I want to learn a little more about it if it's possible
how did u do the monte carlo????
The monte, I did the ubar method and just did the rear end with on servo.
At 2:23 in the video what part is that called
That's a rivet I got that at home depot...
@@XGODWORX oh ok thank you.....nice work by the way I just wanna raise the back up and make it look good
@youcantstopme5136 thank you I appreciate you stopping by and letting me know of any questions you may have...
@@XGODWORX I went and got the mechanical pencil it says #2 0.7mm is that the right size?
@@XGODWORX did I get the right size?
Absolutely amazing my friend… you need to be recognized for this awesome project… I hope you are still building.. you are so talented.. I am absolutely loving this project…
Thank you I appreciate the kind words... they do mean alot.. thank you
Bro I need one of those, please do a tutorial video 🔥💯👊🏿👏🏿
The part u made so paper clip can slide threw in ...what did you use to make it brotha?🙏
On that part I used a piece from a servo Horn and glued it on the upper A arm to extend it.
@@XGODWORX damn bro u a lifesaver! 👍🙏 💯
@jayypeezy36 no problem, I apologize for not pointing that out on the video...
How did u run u bar to the motor infront?...im confused...do u have motor rite under u bar? I cant really tell brotha how ur running the string can u help 🙏..im doing the cutlass also
On this build I put the hopping micro motor right under the U bar. I had to build a section under the chassis to hold the motor.
On this build I used the micro motor and installed it right under the u bar. I just had to build a section under the chassis to hold the motor.
@@XGODWORX can I run a small dc motor? Will it work? Like the ones from a rc boss?
Can i run a small dc motor? Will it work? Like the ones from a rc ?
Will a little dc motor work to make it hop?like the ones from a rc?
Yes bro those would work great...
@@XGODWORXthanks brotha for reply 👍🙏 wasn't sure if there powerful like the regular size johnson motors brotha!
Can u do this on molded bottom ones?
I believe so... but ima have to check on that.
@@XGODWORX thanks bro I'm trying to do the 65 riviera the amt one brotha 1/25 scale...if u can help me man ill gladly appreciate it bro 🙏👍
? Anything brotha
@jayypeezy36 hey, I apologize for the late reply.. I look into a crown vic model. You would have to build the suspension tower. I had to use the u bar method on my crown vic.
@@XGODWORX thanks brotha appreciate the reply man 🙏🙏
That’s sick
Yooo bro i need ur help man...on a hoppin hydro front and back setup
Hey what's going in brother, what can I help you with.
That’s bad ass
Where can I buy this set up
How to make wheels roll brotha? My son likes to roll them
Nice video n setup..ive been tryna get back into building modes wit hydros again after 30 yrs
Models*
You sell them ?
cual es su precio bro?
Estoy asiendo kits. AL momento Para los carros... y voy a dar este carro un raffle Para mis sigidores. Pero voy a ser un anunsio primero..
How do I buy from you
Nice work man
Hello these kits available for sale still
No, it was a lil joke commercial. But ima start making them and I'll post them up
Thats great. Love the Bob Ross commentary. Thats really nice. Interesting Corsair model.👍✌️🇭🇲🦘🐨
Glad you enjoyed it, ur the best
@@XGODWORX Yes I did enjoy that the kit is very nice and I'm a big fan of Bob Ross. So when I heard that I thought what that's great naration of of a wonderful painter. From Melbourne Victoria Australia.Good on ya!👍🇭🇲🦘🐨✌️
Awesome story... thank you for sharing
I know. It's like what are the chances.
I once worked in a toy store. In the front of the store there were several ww2 models on display. One evening a gentleman approached me and asked me about buying a B17 and he pointed to the one that we had on display. I said we have them down in the model aisle. He said "No" I want to buy that one on disply. I told him that those displays were built by customers and that they belonged to them. He said I need to buy this one. Well long story short two days later the builder of the B17 came in and sold the gentleman the plane. I then asked him why did you have to buy this specific plane? He teared up and said. " This is my plane" . You see son I flew this exact plane in WW2. He showed us a photo of him and his crew in front of a B17 with the exact same personalized paint job as the one on display in our store. He then asked the builder of the model what possessed him to use this paint scheme. He said that he wanted to paint an authentic B17, so he went to the library and found some books and found a picture of his plane. He GAVE the guy the plane. He said that it was an honor to be part of this guys history. He settled on a beer at the bar down the street.
That's a wonderful story and very touching. That would be an honour to have built this Aircraft and a veteran to stumbled at that moment to ask for it. Great to the builder of the B-17 model. That is really great.👍🇭🇲🦘🐨✌️
what is a "ur" ?
Hello. "Ur" means "yours" I hope this helps
I apologize "UR" means "yours"... I hope that helps.. 🙏
I found that the 2 blade prop gives it a more aggressive flight control ability. Not sure if I'm wrong on that cause I just started with planes .
That's cool... I'm learning myself. I'm going to have to check it out trying the other props.
Nice
hey tony, isaac here love your vids bro i need help making a hopper model car
Thank you Isaac, I appreciate you brother. Yes for sure. Ima be making a parts list video for the lowrider more in detail.
bro i got everything from your list you made @@XGODWORX
i love the model lowriders, you should see what im starting, im wanting to make a van for my first one. i have the ecu and two motors from small rc car stripperd down front back left right and it has lights i want to put under it. i also have a small bluetooth speaker for it. after i figure out how to make it hop, i have two kits from hoppin hydros, the two motor kit and the 4 motor kit, id like to talk with you about the string, mine just gets bound up and wont hop @@XGODWORX
Thats so cool bro. I cant wait to see it in action...@isaacmorehead8170
You sell them ?
Thank u for stopping by. I don't sell them. I do have friends ask me to build their own models, I was thinking of doing a give a way on a one of my models. So stay tuned for that. Have a great day.
song ??
Where u find the car to take the pc board out I fig it’s a real cheap dollar tree type car or is there a preference you like ?? I made one to drive like a regular RC but didn’t think to do the bounce so you just gave me a great idea thank you for that. Only problem as u well know there’s not enough room for all that in a small frame it’s not like those badass 300 $ RC’s . I appreciate your videos la neta you just got a new subscriber..
Thank you so much brother.. I really appreciate it, I'm glad that I can share these ideas to the rest of the community and all grow and learn, those are from a cheapy rc from the 99c store but any works. I can't wait to see what you come up with. Have a great day
@@XGODWORX thank you bro GOD BLESS , when I saw your videos in comparison to others that I’ve seen they don’t explain very well , the lighting and either video or pics they try sharing it’s like you can’t make it out what exactly there doing.. like I just binged watching some of your videos by the way nice art skills tambien; you know what they say and 90% of people don’t know the whole quote but just like myself your a “Jack of all trades master of none, though often times better than master of one. And I enjoy being multi-passionate.” (That’s the whole quote ) I have my hands into a lot of diff stuff I really enjoy being an artist and fixing things. So I’m really going to try and rewatch again from beginning to end how you linked everything up. Like I said I only did like an RC thing to drive it but when I wanted to try doing the hydros I bought a lot of stuff from the store and as I was getting ready I got stuck bcuz like I said earlier the video and frame work for pics wasn’t good and when I tried to hit them up threw here they didn’t respond so I went on trying to figure it out and then I started with other videos and I got frustrated bcuz the way I was doing it didn’t compare right with the others videos Id have to start from scratch.. But now stumbled here you have actually better video you explain why and what your opinions and recommendations of what to do or if they prefer another way. You showed the lil ball joints and explained about what and why that you need one in the tube glued and the one next loose so basically your cutting on the link to of the lil balls . The other videos don’t say anything so it was confusing. Not to mention your way actually is money savor and using just paper clips the others went more elaborate and I’m like 🤦🏽.. so I have a lot of these model cars I’ve never touched so I’m just gonna pic maybe one of my “G-Bodies” or maybe “ 65 impala” I want to do one with a lot of room . Bcuz if I’m going to put 2 chips and to make it move there’s basically a drive shaft connected I have to mod in order to do so and that’s one reason it was hard to fit everything in one body I had to cut inside where the seats would be so basically I had to have the car that u can’t see the “interior “ but I just bought some small blankets that can be put into the cars so I’m trying to figure out how to do this all with lil room .. so hopefully if I run into something I can just hit u up then when I’m fully done maybe send a personal video so you can see the inspiration you gave … much respect homie
@jaybee1158 that is super cool brother, I just finished reading ur thoughts, I'm very grateful to be able to inspire. I'm working on a 59 elco I put a rear diff and hydros on the back just working on the front. I'll post a video soon ... Maybe we can come up with more ideas.. ur the best and I can't wait to see ur work...
How did u make one drive brotha?
Have much I want one. I haven't seen one of those Middle school. Let me know
Can someone help me it only hopps once and I put Vaseline on it already
Check if ur string is getting snagged some where or that ur string has enough space between the motor and the pinion gear on the shaft of the motor so it can unwind. Hope this helps... 🙏
Please don't ever spell your name like that😮
Love how you made each rear wheel independent but kept it to one motor
I'm very impressed with the rear setup. Super clean work
Thank you, I appreciate you checking my work... I apologize for the late reply. I hope all is well...
You can replace interior with motors and do tinted windows to hide them
That's what I did first, but I challenged myself and this came out good. I was surprised It worked out...
We would find the smallest motors possible and wire one to each wheel and make a switch box . But some models don't have enough room for 4 motors so we would do 1 front and 1 back
Thank you love it
You sell them ?
Doesn't the string on the motor wind itself up tight?
It does, you can use Vaseline on the string To help it from winding up. And once the car comes down it unwinds itself. Hope this helps
@@XGODWORX Thanks, yep I was starting to figure that out. I must try this for sure.
How much , I’ll buy it for my son
I apologize it's just a lil fun carmercial, nothing is for sale.
What's up I have question Where did you get the spring from that your using in the front of the model to hop car . ?
G2 pens
If you sell them like this , let me know , just had to watch this video a few times. Awesome