Пікірлер

• 
  @ILikeRagtime19 күн бұрын

  I would have been MUCH BETTER with mor pics of what you were doing and NONE of your face!

• 
  @BasnicanАй бұрын

  How much was this project?

• 
  @mikeziviello87897 ай бұрын

  great share, i had the same problem, tried your solution, worked like a charm. thx

• 
  @hksht7 ай бұрын

  thank you for the video explaining and showing that these brackets can close the top part of the door manually. just what i was looking for. P.S nothing wrong with your face,i appreciate you taking the time to post this

• 
  @fivalxerex64378 ай бұрын

  Sorry but the focus on the video should be on the item in the title. It would be more appropriate to change the title in the current case. Disappointing for me.

• 
  @jimmywilliams602311 ай бұрын

  You should have turned the camera towards the job not your face

• 
  @brycepridemore986411 ай бұрын

  Hard watch with that audio lol

• 
  @evanhosler4855 Жыл бұрын

  That’s some of the worst block work I’ve ever seen

• 
  @Daniel-59 Жыл бұрын

  Just did a set of these quick turn brackets last night. Nice job!

• 
  @brandonhakes7573 Жыл бұрын

  Really appreciate the video Paul! I'm in the process of removing my old wooden door garage doors and ran into the low clearance on one of my doors. This looks like the solution I needed. Thank You!

• 
  @thelastrebelshow1627 Жыл бұрын

  How much?

• 
  @jumpinggulley Жыл бұрын

  I tried the board but didn't use screws. I'll try the screws. I have an 85 Honda

• 
  @warrenbluejay8300 Жыл бұрын

  That isn't removing the tire that's breaking the

• 
  @edpchong9631 Жыл бұрын

  Its an old tire literally says it in the title 🤨

• 
  @markimark8 Жыл бұрын

  How do you get wood forms to be straight if they are slightly warped from lumber yard? @2:10 frame, did you rough in for a bath tub or shower? it looks like only commode and sink?

• 
  @Vin_Sanity Жыл бұрын

  How much would this cost per sf with labor? Thanks!

• 
  @ChrisHall803 Жыл бұрын

  I could watch after I turned the volume off

• 
  @cd1168 Жыл бұрын

  Horrible

• 
  @tomedmondson52362 жыл бұрын

  So, what is the ideal/minimum height from the door opening to the ceiling??

• 
  @brandonk15022 жыл бұрын

  I'm just curious do, you remember what size the fittings you used on those? I have that same type of cement sewer and I'm going to have to make some repairs in the near future. I bought some fittings before, and they were either too small to fit over the pipe or too large.

• 
  @gabrielhernandez70472 жыл бұрын

  This is awsome thanks!!

• 
  @yankeesusa12 жыл бұрын

  Did you think about replacing the middle piece with the same material? It would be more solid and maybe even quieter. Either way, this is a great way to avoid paying so much money for the other solution.

• 
  @MikeSmith-px7ec2 жыл бұрын

  I noticed the prefab long blocks were not used above the windows. Is that just because your state doesn't require it as code?

• 
  @craigslistebaystuff2 жыл бұрын

  Well this partially helps me as I was going to get a pipe cutter to snap off a concrete pipe that sticks out to far in a sump pump crock. Now that I know the pipe cutter will only crush it I'm back to square one on how to cut off about 3 inches. Thanks for posting though.

• 
  @1998Sparkles2 жыл бұрын

  All I can see is your face!!! WTAF Marty? Show the damn instal there Shakee

• 
  @michealroth1208002 жыл бұрын

  PLEASE LEARN TO EDIT! My goodness the 2 voices were SUPER annoying.

• 
  @augustwebb85762 жыл бұрын

  2 people talking at once made this very unwatchable.

• 
  @kylewest47702 жыл бұрын

  Just made my day better, it works great!

• 
  @joseguillen12112 жыл бұрын

  Wts the perimeter?

• 
  @pauldrummer20102 жыл бұрын

  25x28

• 
  @scflooring86582 жыл бұрын

  Great job and great video!! Thanks

• 
  @scflooring86582 жыл бұрын

  Who is talking? You or you?

• 
  @desertfox1794 Жыл бұрын

  😂😂😂

• 
  @AMC14442 ай бұрын

  😂😂

• 
  @dreamlookautodetailingauto33532 жыл бұрын

  Sooo boring 😴 ....

• 
  @brightgardenentrepreneuria9102 жыл бұрын

  That's saying something. I watched a video on the Bead Breaker and I was guessing they were like $50, turns out they are more like $250!!! Another guy in a video was trying to guide his wife to drive just over the tire, not the rim - wasn't using a ramp like you did in this vid. I am wondering if you have to screw the board/ramp into the tire? Put the wheel/tire against something permanently attached to the floor to avoid having it squirt away when you drive up.

• 
  @AlanMuratet2 жыл бұрын

  Dude, we don't care to watch your face. show the tracks

• 
  @pauldrummer20102 жыл бұрын

  This is a great little spitter for fire place cutting. This was very dry very hard mesquite. It was just what I need.

• 
  @pauldrummer20102 жыл бұрын

  (Before this )we tried cutting it off , bolt cutters nothing worked as easy as this.

• 
  @ellobo13262 жыл бұрын

  I weld three chain clevis like that to every bucket I have owned. One in center and one near outer edges. Mostly use the outer ones to hold the excess chain when lifting with center chain. Worth their weight in gold for lifting and dragging.

• 
  @pauldrummer20102 жыл бұрын

  Yes they

• 
  @beausmith39002 жыл бұрын

  Thanks for showing this, after seeing the kit they made I had thought about making my own, because 200$ is pretty steep... anyway, I'm gonna go do this right now... thanks again

• 
  @christhefistful2 жыл бұрын

  Great modification. Thanks for making the video.

• 
  @ericpiper89603 жыл бұрын

  That’s awesome thanks

• 
  @meseahunt3 жыл бұрын

  good job sir!!!

• 
  @OnlyOneFever3 жыл бұрын

  Nice video of your face.

• 
  @mjp51293 жыл бұрын

  Great job. Watched another guy and he made a v-shaped piece of foam to direct the air towards the the vents. Yours is working just as well. Maybe better. Going out to check our motorhome, to see what I can do for it. It’s older, so it’s not the same unfortunately, but I should be able to figure out something. Thanks a lot.

• 
  @kerryvbc13 жыл бұрын

  I personally can't believe what JUNK these RV A/C units are. Then on top of that the very poor way the units are "ducted". I'm hoping that someone comes out with inverter technology Soon. Most RV roof top units are very poorly made compared to your standard home window unit and they get 500 to 650 dollars when window unit are less than 150$ ? Your idea is excellent. Thank you.

• 
  @stevewarner88803 жыл бұрын

  You had that old buzz box cranked up hot!

• 
  @pauldrummer20102 жыл бұрын

  Yes I wanted a deep weld witch you can tell buy the sparks) going thru the bucket. This has been a very good welder great for heavy duty welds.I’ve had it for years.

• 
  @stevewarner88802 жыл бұрын

  Nothing wrong with the old buzz box. Lincoln has sold millions of them. They have proved themselves over many years of dependable service. I have it’s big brother, the Idealarc250 but not everyone needs a 350lb AC/DC machine

• 
  @dondartt6843 жыл бұрын

  I spent the money and 200 wish I had seen this. But it still works great.

• 
  @moses11423 жыл бұрын

  Good tip. Saving me $200!!!

• 
  @rickc98733 жыл бұрын

  COOOOL !!!!

• 
  @Tony_in_AZ3 жыл бұрын

  Interesting process you use... I need air flow out of the main vents for my bedroom since the ac unit is located there. I guess a few small holes for start to feed the bedroom area, go from there thanks.

• 
  @dalestanley66183 жыл бұрын

  Can you post a link to find this double rollers? It would also be nice if you would do a close up so I figure it out.

• 
  @pauldrummer20102 жыл бұрын

  I don’t have that info anymore but I got it on Amazon.

• 
  @lissaleggs4136 Жыл бұрын

  Menards has primetime replacement parts. Quick turn bracket. Home Depot order from clopay. Lowe's maybe check the websites for parts. I ordered mine from Menards.

• 
  @profuse0073 жыл бұрын

  How you finishing the ext wall?