The design of the WotR figures are about 470yrs old
@jjsmallpiece92349 күн бұрын
For the flags I find its better to scan into a computer, then print off and cut out to make the flags
@andersand65762 ай бұрын
Nice unbagging. Seeing a few of them build and paintwd up qould be nice. Maybe even compared to other manufacturers for scale. Looking forward to follow your channel.
@hamishbell25263 ай бұрын
I like Fireforge and have a load of their hard plastic Byzantines. I got these Varangians to add to the army and they were a nightmare. In the box are arms and axes for two-handed axe, shield arms and right arms for single handed weapons, but no single-handed weapons. So if you want them you need to get into the spares box. It was extremely difficult trying to line up the arms with the hands (which are moulded onto the axe) as you need to get the arms at exactly the right angle to line up with the flat bit at the end of the hands. The only glue which would stick was superglue, and even that provides no adhesion initially. The provided axes did not match the arms (in terms of angles you need to fix at, and whether over hand or underhand), so I ended up having to shave off the hands to use the double handed axes either single hand or resting on the shoulder. The resin would not take my usual acryllic I use for undercoat at all, so I had to dig out an old Humbrol enamel to undercoat them. Overall very disappointed. For the price I wish I had bought some of the metal Varangians on the market.
@xedrickOG5 ай бұрын
Dpes this wprk on battletech minis?
@sovietonion39376 ай бұрын
Just got a set of these bad boys. The detail is great, but my goodness I am having so much more trouble assembling them than any other Perry or Victrix set I've gotten. Gaps galore!
@Michaelkayslay7 ай бұрын
Does it work on plastic warhammer 40k models ?
@porgstew365710 ай бұрын
I want to get into this game but I find myself lost with every question I have. This game definitely has a smaller group of players thst what I previously have played. I can't find anything actually explaining the list so I can figure out what I need to buy or showing me what other things I may need to be able to play. Is there some place I should go to get answers?
@olaflange525410 ай бұрын
what rules you wanna use?
@porgstew36579 ай бұрын
@@olaflange5254 ...? Are there multiple sets of rules?
@greenrain6610 ай бұрын
Great review video, actually very helpful to see what is on the sprews in detail.
@vibechecker316811 ай бұрын
This kit is really good. I've got one and I can vouch for the quality. The sergeant/mounted archer bodies could also be used for 1390s men at arms and the various other bodies and helmet evolutions, cover the period up to 1430. I also use them as ASOIAF miniatures, though obviously more realistic and mundane than the tv shows and the wargame. You can get at most of the seven kingdoms, excluding some of Dorne and the Iron Islands, to certain degrees. 3:35 is a style of visor where the eyeslits would be small vertical gaps cut for eyeholes in order to further protect the eyes, stopping someone from slipping a dagger or sword in. It reduced visibility even more, but often knights didn't usually need visibility having the visors up for most of a battle, only putting them down when about to go into combat.
@coranford7463 Жыл бұрын
For me my biggest challenge is patience. Your literally having to glue a part and let it dry before gluing another part. It's well worth it though to get good results.
@coranford7463 Жыл бұрын
Hi and greetings from the UK. I just completed today my ledge top caravan. I had a few problems such as accidently breaking one of the shafts though i manage to repair it. I will order the bow top wagon. Thank you so much for your tutorial, subbed. 😊 I love your accent.
@barriereid9244 Жыл бұрын
I practise my 40 days a year longbow shooting here in England. The club celebrates The Hundred Years War - Battle of Crecy. The targets are of course medieval inspired and a padded gambeson is more difficult to penetrate with medieval pyles (arrow heads) than you imagine. I used those that penetrate chain & plate.
@Geerladenlad Жыл бұрын
Did you have any extra bits left over building these guys like heads or arms?
@pixelcris3598 Жыл бұрын
Can they stand without their base?
@WoofyMcDoodle Жыл бұрын
Have you reviewed any of their models in recent times if quality has changed? Their dwarfs look great in pictures and I just need 1-2 for my DnD Warband however they cost between 6-9 dollars a model which is VERY pricey so if I dont get my moneys worth that would suck. Also how do they fit with other models? they look quite tall compared to other 28mm miniature brands.
@ComfortsSpecter Жыл бұрын
4:40 Everything said here is just wrong
@brunneng38 Жыл бұрын
Just ordered this. I thought this was a new box 😂😂😂😂
@Swindondruid2 Жыл бұрын
I was very disapointed with the crossbows. I expected some with two arms to make the poses easier. Also, I had no idea which left arm went with which right arm - no assembly instructions, no numbers, just pot luck.
@trevorwoolson3860 Жыл бұрын
I really want to get some of their human knights; theyre 32mm it says, is it possible with the STL files to print these at a more 28mm to match with some of my other warahmmer fantasy battle models?
@sirallenrider8796 Жыл бұрын
I love your perry miniature reviews!
@therookiegamingpaintingsho756 Жыл бұрын
Jsyk those big plate things are for basing minis
@therookiegamingpaintingsho756 Жыл бұрын
Personally I don’t like the teutonics and I wanted templars but I’m hey are sold out right now so I just got this and snipped off the weird helmet things and they were great! 9.5/10 just because I want more crusader helmets but it was great!
@napoleon6071 Жыл бұрын
Just ordered these, can't wait.
@brianlazouche20152 жыл бұрын
fyi, the ''stairs'' as you call them ( a.k.a steps ) would have been used at the rear
@brianlazouche20152 жыл бұрын
Great video on ''do not do it like me''..................... really bad sorry buddy
@TheHeater21212 жыл бұрын
Will you be doing this for the samurai kickstarter???
@mattgrandich39772 жыл бұрын
I love the video description.
@k24_4twenty2 жыл бұрын
how close are they to the scale of warhammer fantasy models? looks amzazing
@gordongraham20642 жыл бұрын
Pretty darn close. I just did a kitbash with these to get a mounted general and I think it looks great.
@davidspiers60422 жыл бұрын
Less unnecessary prattle please. I feel that this is more about you talking than showing wehat the bag has to offer. I will not be returning.
@guardbeardiabeardio12732 жыл бұрын
And you will not be missed.
@StormtrooperYD2 жыл бұрын
Anakin's Flaw card prevents him from being issued an order, whether it be by using his own cards,Authoratative,comms relay etc. nada order for you mr.Anakin
@CamelotGaming2 жыл бұрын
Yo Guardbro, you ever tried the Star Wars Roleplaying game Fantasy Flight made?
@guardbeardiabeardio12732 жыл бұрын
I've tried it a few times, didn't like the dice.
@CamelotGaming2 жыл бұрын
@@guardbeardiabeardio1273 Takes time to get used to, but the game is very good. If you want to do a game with more Normal dice try West End Games. It only uses d6s.
@nerdfatha2 жыл бұрын
I know this video is older, but for state side plastics Wargames Atlantic is really gearing up. They have Historical, Fantasy, and Sci Fi minis. Their lines are a bit all over the place but nowthat they moved the entire operation to the US they are really going to ramp up production. I'm actually considering getting this Perry set and a set of Wargames Atlantic's Les Grognards to do some odd alt history/ sci fi kitbashing.
@ironwolf70292 жыл бұрын
Yooo you finally uploaded here again!
@Mauradin982 жыл бұрын
Would love to see more of these.
@pedromazurin15112 жыл бұрын
Nice video, but what is the manufacturer for the right man at arms unpainted? Thx in advance
@Horstinio2 жыл бұрын
How is thescale in comparison to gw models? Maybe i would acquire them for a cawdor conversion.
@mikemodels9282 жыл бұрын
These figures are incredibly nice. Wish they were avaliable in my country :I
@WarGamingNewbHistorical2 жыл бұрын
Just got a couple of these myself. Thanks for the unboxing!
@boku51922 жыл бұрын
Exelent video thanks a lot for those comparisons☺
@hobsonjones86932 жыл бұрын
Like the scale comparison between different manufacturers
@CapitanCorner2 жыл бұрын
Very informative and funny video! :D
@2007bing2 жыл бұрын
I must get this bag of Vikings!
@bluepillaus2 жыл бұрын
The prints look a little overexposed I think. Detail could be sharper with a couple tweaks to exposure time. Overall pretty good, just needs to work on supports as you said. the 3d printing pro channel has great tips for that. Remove the supports prior to curing after soaking in some hot water. You can get almost no support damage that way.
@GHOSTDOG582 жыл бұрын
Anymore videos coming soon? Miss your content!
@ironwolf70292 жыл бұрын
I asked him about it on a "guardtalk" episode (videos he makes where he answers questions sent to him via email) and he sadly said the other channel takes up a lot of his time to keep making content for this one. So he'll likely not upload here in a long time :/
@EidolonSpecus2 жыл бұрын
"studded leather" never existed. "Studs" on armor are rivets to hold different stuff together. Like in brigandine armor, which is usually overlapping metal plaquettes riveted to the underside of a suede or heavy fabric outer layer (it is from seeing this that Gary Gygax got the misconception of studded leather from; he didn't know jack shit about armor).
@EidolonSpecus2 жыл бұрын
They need some daggers to go with those polearms.
@thomastaylor12542 жыл бұрын
What size are the square bases you are putting them on? 20mm or 25mm? Thanks for the video
Пікірлер
The design of the WotR figures are about 470yrs old
For the flags I find its better to scan into a computer, then print off and cut out to make the flags
Nice unbagging. Seeing a few of them build and paintwd up qould be nice. Maybe even compared to other manufacturers for scale. Looking forward to follow your channel.
I like Fireforge and have a load of their hard plastic Byzantines. I got these Varangians to add to the army and they were a nightmare. In the box are arms and axes for two-handed axe, shield arms and right arms for single handed weapons, but no single-handed weapons. So if you want them you need to get into the spares box. It was extremely difficult trying to line up the arms with the hands (which are moulded onto the axe) as you need to get the arms at exactly the right angle to line up with the flat bit at the end of the hands. The only glue which would stick was superglue, and even that provides no adhesion initially. The provided axes did not match the arms (in terms of angles you need to fix at, and whether over hand or underhand), so I ended up having to shave off the hands to use the double handed axes either single hand or resting on the shoulder. The resin would not take my usual acryllic I use for undercoat at all, so I had to dig out an old Humbrol enamel to undercoat them. Overall very disappointed. For the price I wish I had bought some of the metal Varangians on the market.
Dpes this wprk on battletech minis?
Just got a set of these bad boys. The detail is great, but my goodness I am having so much more trouble assembling them than any other Perry or Victrix set I've gotten. Gaps galore!
Does it work on plastic warhammer 40k models ?
I want to get into this game but I find myself lost with every question I have. This game definitely has a smaller group of players thst what I previously have played. I can't find anything actually explaining the list so I can figure out what I need to buy or showing me what other things I may need to be able to play. Is there some place I should go to get answers?
what rules you wanna use?
@@olaflange5254 ...? Are there multiple sets of rules?
Great review video, actually very helpful to see what is on the sprews in detail.
This kit is really good. I've got one and I can vouch for the quality. The sergeant/mounted archer bodies could also be used for 1390s men at arms and the various other bodies and helmet evolutions, cover the period up to 1430. I also use them as ASOIAF miniatures, though obviously more realistic and mundane than the tv shows and the wargame. You can get at most of the seven kingdoms, excluding some of Dorne and the Iron Islands, to certain degrees. 3:35 is a style of visor where the eyeslits would be small vertical gaps cut for eyeholes in order to further protect the eyes, stopping someone from slipping a dagger or sword in. It reduced visibility even more, but often knights didn't usually need visibility having the visors up for most of a battle, only putting them down when about to go into combat.
For me my biggest challenge is patience. Your literally having to glue a part and let it dry before gluing another part. It's well worth it though to get good results.
Hi and greetings from the UK. I just completed today my ledge top caravan. I had a few problems such as accidently breaking one of the shafts though i manage to repair it. I will order the bow top wagon. Thank you so much for your tutorial, subbed. 😊 I love your accent.
I practise my 40 days a year longbow shooting here in England. The club celebrates The Hundred Years War - Battle of Crecy. The targets are of course medieval inspired and a padded gambeson is more difficult to penetrate with medieval pyles (arrow heads) than you imagine. I used those that penetrate chain & plate.
Did you have any extra bits left over building these guys like heads or arms?
Can they stand without their base?
Have you reviewed any of their models in recent times if quality has changed? Their dwarfs look great in pictures and I just need 1-2 for my DnD Warband however they cost between 6-9 dollars a model which is VERY pricey so if I dont get my moneys worth that would suck. Also how do they fit with other models? they look quite tall compared to other 28mm miniature brands.
4:40 Everything said here is just wrong
Just ordered this. I thought this was a new box 😂😂😂😂
I was very disapointed with the crossbows. I expected some with two arms to make the poses easier. Also, I had no idea which left arm went with which right arm - no assembly instructions, no numbers, just pot luck.
I really want to get some of their human knights; theyre 32mm it says, is it possible with the STL files to print these at a more 28mm to match with some of my other warahmmer fantasy battle models?
I love your perry miniature reviews!
Jsyk those big plate things are for basing minis
Personally I don’t like the teutonics and I wanted templars but I’m hey are sold out right now so I just got this and snipped off the weird helmet things and they were great! 9.5/10 just because I want more crusader helmets but it was great!
Just ordered these, can't wait.
fyi, the ''stairs'' as you call them ( a.k.a steps ) would have been used at the rear
Great video on ''do not do it like me''..................... really bad sorry buddy
Will you be doing this for the samurai kickstarter???
I love the video description.
how close are they to the scale of warhammer fantasy models? looks amzazing
Pretty darn close. I just did a kitbash with these to get a mounted general and I think it looks great.
Less unnecessary prattle please. I feel that this is more about you talking than showing wehat the bag has to offer. I will not be returning.
And you will not be missed.
Anakin's Flaw card prevents him from being issued an order, whether it be by using his own cards,Authoratative,comms relay etc. nada order for you mr.Anakin
Yo Guardbro, you ever tried the Star Wars Roleplaying game Fantasy Flight made?
I've tried it a few times, didn't like the dice.
@@guardbeardiabeardio1273 Takes time to get used to, but the game is very good. If you want to do a game with more Normal dice try West End Games. It only uses d6s.
I know this video is older, but for state side plastics Wargames Atlantic is really gearing up. They have Historical, Fantasy, and Sci Fi minis. Their lines are a bit all over the place but nowthat they moved the entire operation to the US they are really going to ramp up production. I'm actually considering getting this Perry set and a set of Wargames Atlantic's Les Grognards to do some odd alt history/ sci fi kitbashing.
Yooo you finally uploaded here again!
Would love to see more of these.
Nice video, but what is the manufacturer for the right man at arms unpainted? Thx in advance
How is thescale in comparison to gw models? Maybe i would acquire them for a cawdor conversion.
These figures are incredibly nice. Wish they were avaliable in my country :I
Just got a couple of these myself. Thanks for the unboxing!
Exelent video thanks a lot for those comparisons☺
Like the scale comparison between different manufacturers
Very informative and funny video! :D
I must get this bag of Vikings!
The prints look a little overexposed I think. Detail could be sharper with a couple tweaks to exposure time. Overall pretty good, just needs to work on supports as you said. the 3d printing pro channel has great tips for that. Remove the supports prior to curing after soaking in some hot water. You can get almost no support damage that way.
Anymore videos coming soon? Miss your content!
I asked him about it on a "guardtalk" episode (videos he makes where he answers questions sent to him via email) and he sadly said the other channel takes up a lot of his time to keep making content for this one. So he'll likely not upload here in a long time :/
"studded leather" never existed. "Studs" on armor are rivets to hold different stuff together. Like in brigandine armor, which is usually overlapping metal plaquettes riveted to the underside of a suede or heavy fabric outer layer (it is from seeing this that Gary Gygax got the misconception of studded leather from; he didn't know jack shit about armor).
They need some daggers to go with those polearms.
What size are the square bases you are putting them on? 20mm or 25mm? Thanks for the video
If it ain't broken, don't fix it.
I got this set for $85 on Gamersroll