Пікірлер

• 
  @godwillobrian51487 сағат бұрын

  Solid 👍

• 
  @diamonddiop33752 күн бұрын

  OMG, i rarely put reviews on KZread but it is an obligation to put one today. I did the exact same steps and my issue got fixed right away. Thanks so much

• 
  @amp52753 күн бұрын

  The process was explained concisely. Thank you!

• 
  @V_T74 күн бұрын

  Part numbers? Links?

• 
  @V_T74 күн бұрын

  Same as e-350?

• 
  @scottcarpenter11084 күн бұрын

  Thanks a million!

• 
  @NDanny4 күн бұрын

  Thank for the clip. It did not work on my Highlander. Please what do I do again?

• 
  @sanBastian1235 күн бұрын

  you need to wrap those lug nut threads with cloth when you put those pry bars.

• 
  @JCantu-hu2cn5 күн бұрын

  This wouldn't cause my floor boards to be wet would it?

• 
  @ATBIGA6 күн бұрын

  Merci beaucoup

• 
  @philliptaylor59817 күн бұрын

  Thermostat housing bolt size 10mm same as other one?

• 
  @DanTheManIOM8 күн бұрын

  was there a retainer at the transmission side ? 03 Forester and I need to see how it goes back together and stays together.... I put mine back together but drove it and heard click, etc, and noticed axle had popped out 3/8 inch at the transmission, WTH. Tired and disappointed at the moment. Maybe there is no retainer ?

• 
  @user-rq1mx6ou8u8 күн бұрын

  Thank you sir. All I really wanted to know is if I'm going to have to pull the dash apart to get the expansion valve. You can make it short with that information

• 
  @BIGWILLSCARCARE6 күн бұрын

  Thanks for watching please Like, Share and Subscribe if you haven't already

• 
  @MattGride9 күн бұрын

  This was just what I needed! Clear explanation, list of needed tools, and some great tips made it clear to me that I can do this job myself. Liked and subscribed, Sir. Keep up the good work!

• 
  @jp25559 күн бұрын

  Thanks for the video 💯

• 
  @chengone29 күн бұрын

  I think if you use rubber type of material like the bike tire inner tube instead of the red rag which slips and spins that would make it not spin when you turn the nut.

• 
  @oskarcopom74411 күн бұрын

  Gracias!!

• 
  @kenankilic143211 күн бұрын

  Right on the money 👏👏

• 
  @VideoNOLA11 күн бұрын

  So aside from needing the car raise for your own access, does the vehicle really need to be lifted off the front wheels when changing out sway bar bushings? Because if not, I'd like to use ramps. Thoughts?

• 
  @WhiteCrowHuntingBuffalo11 күн бұрын

  Easy way to take harmonic balancer off, put a socket with breaker bar on it, brace it solid without any play, bump that starter just barely. Like magic it's loose. Not for everyone, but it gets the job done quickly without extra BS.

• 
  @palmerboizcooking502211 күн бұрын

  Thanks, more video's please 🙏

• 
  @rpiian12 күн бұрын

  I have a 2012 X Premium Forester - what's the part number on this thing? I'd like to order it ahead of time as mine is rusted like yours! EDIT: Looks like 14050AA992 is the latest for my car. Also, what do you recommend for a procedure for draining/refilling coolant? Is there a special bleed procedure? Thank you!! This is an awesome video!

• 
  @johnrouse695712 күн бұрын

  Thanks for taking the time to make this video.

• 
  @kadynerickson633113 күн бұрын

  This is such a helpful video! Do you know if there universal parking brake cables will work with a Nissan Frontier? I know "universal" is in the name but the length seems far too great from the products I'm finding online

• 
  @mundylunes775513 күн бұрын

  Wow, this is exactly what I've been searching for my Hyundai Accent.

• 
  @BIGWILLSCARCARE13 күн бұрын

  Glad I could help! Thanks for watching please Like, Share and Subscribe if you haven't already

• 
  @kylemaynard375815 күн бұрын

  I just chwnged the battery in the fob. All it does is blink red. The button on ignition doesnt do anything

• 
  @jojoo199515 күн бұрын

  Jiffy lube broke my plug. And tried to cover it with glue and I took it to them because I was just feeling lazy to do it that day after a 13 hr shift so I took it to them and this happens. It was time for the next one and it’s when I turned the drain plug it popped right off and seen the glue they used.

• 
  @dennisfalan162315 күн бұрын

  their are a lot easier ways!

• 
  @austinabbott-zd2zf16 күн бұрын

  Hello, how are you? Thank you for your video. Is it normal for there to be water in that hose that connects to the EGR valve? Because as I see when you removed it there is water there. Greetings from Honduras.

• 
  @JohnDeere14SZ20 күн бұрын

  Never have to remove a skid plate keep one bolt in and it will swing out of the way for filter access. Choose wisely. 😮😅

• 
  @hermanoGabriel21 күн бұрын

  Gracias, funcionó, creo que se me activó por que desconecté el air sensor, se me olvido conectarlo cuando encendí el vehiculo

• 
  @BIGWILLSCARCARE16 күн бұрын

  Glad it helped. Thanks for watching please Like, Share and Subscribe if you haven't already

• 
  @djgrandedanxingentertainme517421 күн бұрын

  Whats the name of the part

• 
  @BIGWILLSCARCARE16 күн бұрын

  Door lock Actuator

• 
  @Kiwitheplayer23 күн бұрын

  0:17 vsc reference

• 
  @vivianeamouzou549523 күн бұрын

  Where can I get the replacement

• 
  @vivianeamouzou549523 күн бұрын

  Please, I had the same problem for weeks

• 
  @johndavid359823 күн бұрын

  You have a empty connector by the accelerator connector. I have that too. No other video shows that. I tried to find what is supposed to go in that connector for a long time....but nothing goes in that empty connector!

• 
  @leonarddaye755024 күн бұрын

  BWCC 💪🏾

• 
  @bonholio0o24 күн бұрын

  It's been a while since I did this using HF Holt brand. When you pull at 6:58 , try to create a seal and keeping the reservoir full as much as possible as it depletes then keep refilling. I used about 2Q and didn't have to bleed the air at all in the end. It was turning nicely and smooth. God, I wish I took a photo kicking myself now cuz I don't remember how I hooked it up to create a tight seal. It was so simple too. I used the heck out of this fluid extractor it's a game change for me. I used for just about everything from brake to oil to PS you name it. Brake was a life saver comparing to Mightyvac hand pump. I love using Fluid Extractor wishing more people use it frequently. For oil, it actually pulled to bottom of the pan because the oil nut sits 1" higher than bottom so I was always stuck with old oil contaminate new oil

• 
  @mrb824225 күн бұрын

  This must be a common issue for the Hyundai models for those years because I have a 2012 Elantra that I just bought a couple of weeks ago and it has this exact same issue

• 
  @Jazmo25355 күн бұрын

  Same just bought yesterday same issue

• 
  @14sedriquewilkerson25 күн бұрын

  Omg!! My key fob has been dying over and over again in the worst of situations! Thank you man 😊so simple..yet I would’ve never known!

• 
  @franciscorosarioperez253226 күн бұрын

  What a shame!

• 
  @914runners27 күн бұрын

  Thank you for video gonna tackle mine now!

• 
  @MrBoricuahastalamuer27 күн бұрын

  Thanks!

• 
  @hassaniftikhar821628 күн бұрын

  Hey boss. Very excellent job , camera angle & clear instructions. Quick Question is how do I know that my bump stop and mount are in good condition. My vehicle is very lowered from back. Nothing in the trunk but still lowered no oil on shocks. I want to replace the shocks but I just want to make sure that my bump stop and mount are also good before installing the new shocks. My vehicle mileage is 140k. 2014 Hyundai Sonata GLS. Will be highly appreciated for your answer and guidance. Thank you so much. God Bless.

• 
  @shaza688028 күн бұрын

  As you have talked about back up fuse #7. I replaced it and problem solved for a month or so. Now same problem is back. I thought I can follow the same procedure, but problem remains. It did NOT work this time. Any suggestions?

• 
  @sewkung470829 күн бұрын

  One step you missed, apply some grease on the new oil seal lip and pulley journal, this would prevent pre-mature wear. on any lip seal.

• 
  @Duken4evr2929 күн бұрын

  Thanks for the video. Escapes are are all crusty by the time they are this old - normal operation 😂

• 
  @firstlast254429 күн бұрын

  Another comment from me saying u hit the nail on the head that’s exactly what was wrong with my van

• 
  @jascam129 күн бұрын

  Excellent Video, Clear and to the point, no cheesy music, dogs or kids. TKU Sir.

• 
  @huberlukeableАй бұрын

  This is why I'll never buy another Nissan.