Biswa's DIY

Biswa's DIY

Plz Subscribe ..

Restoration of a Digital Diary

Restoration of a Digital Diary

A POP- POP Boat

A POP- POP Boat

What was that !

What was that !

XHDATA D219 Unboxing

XHDATA D219 Unboxing

Let's Fix a Wooden Toy..

Let's Fix a Wooden Toy..

Restoration of sony Walkman

Restoration of sony Walkman

Poco C51 Quick Look.

Poco C51 Quick Look.

Пікірлер

  • @frenky539
    @frenky53913 күн бұрын

    bro i got same version but cant fit the usb male to female cable in it what did you do?

  • @BiswajyotiDIY
    @BiswajyotiDIY13 күн бұрын

    There is a male female cable with metal tip... it will fitted well ..and you need to add sone epoxy glue in it to fix it permanently ..

  • @SonuKumar-ff1kt
    @SonuKumar-ff1kt14 күн бұрын

    Which pin use for charging?

  • @BiswajyotiDIY
    @BiswajyotiDIY14 күн бұрын

    @@SonuKumar-ff1ktold Nokia Round Pin (for nokia 1600 phone .)

  • @SonuKumar-ff1kt
    @SonuKumar-ff1kt14 күн бұрын

    @@BiswajyotiDIY how mm size?

  • @BiswajyotiDIY
    @BiswajyotiDIY14 күн бұрын

    @@SonuKumar-ff1kt 3.5mm

  • @viscourtroy
    @viscourtroy15 күн бұрын

    Today, smartphones contains these past day electronics diary function... 🤣🤣😆😆[😞😞 please not to look backward!]

  • @soumyajitkar4586
    @soumyajitkar458616 күн бұрын

    Brother , does it decreases the quality of front camera? Pls reply

  • @BiswajyotiDIY
    @BiswajyotiDIY16 күн бұрын

    No...as the uv glue is very trasparent ...

  • @banglagaming3185
    @banglagaming318517 күн бұрын

    Bro are u from bengal?, where u have purchased from in offline can u tell

  • @BiswajyotiDIY
    @BiswajyotiDIY17 күн бұрын

    @@banglagaming3185No.. I am from Assam...and I bought it from Jorhat ...

  • @banglagaming3185
    @banglagaming318517 күн бұрын

    @@BiswajyotiDIY ok thanks

  • @flavours_of_kerala
    @flavours_of_kerala19 күн бұрын

    Is it same for Venue?

  • @BiswajyotiDIY
    @BiswajyotiDIY19 күн бұрын

    @@flavours_of_kerala No... venue's boot lamp is in different shape ..

  • @flavours_of_kerala
    @flavours_of_kerala18 күн бұрын

    @@BiswajyotiDIY thanks bro. Venue S 2023 dont have boot lamp. How to get it. Its does have a slot that is covered with a plastic cover. Does it have a wiring behind to the coupler to coupler fitting?

  • @BiswajyotiDIY
    @BiswajyotiDIY18 күн бұрын

    you can check it yourself by removing the plastic cover .. i think there should be a small coupler to fit the boot lamp..if there is a coupler then you may order it online or offline .

  • @flavours_of_kerala
    @flavours_of_kerala18 күн бұрын

    @@BiswajyotiDIY Ok thanks. I will check

  • @HRDGAMER-px9sq
    @HRDGAMER-px9sq22 күн бұрын

    Phle hi volume button me bhr liya😂😂😂😂

  • @BiswajyotiDIY
    @BiswajyotiDIY22 күн бұрын

    I cleaned it with isopropyl alcohol...Thanks for watching ..😊

  • @GauravSingh_5911
    @GauravSingh_591110 күн бұрын

    😂😂😂😂😂😂

  • @ahmedkh7358
    @ahmedkh735823 күн бұрын

    Loved how u cleared everything. (note: did not find the SSD wire in the laptop box, i have X515EP)

  • @BiswajyotiDIY
    @BiswajyotiDIY23 күн бұрын

    Mine is Asus X515EABQ312TS ...if it is not available with your model then you need to buy it separatley ..Thanks for watching ..plz subscribe for more videos ..

  • @battleboykmpd
    @battleboykmpdАй бұрын

    Link?

  • @BiswajyotiDIY
    @BiswajyotiDIYАй бұрын

    I bought it from offline market ..Thanks for watching ....plz subscribe for more videos

  • @battleboykmpd
    @battleboykmpdАй бұрын

    @@BiswajyotiDIY ohh...bdw how's the phone...I just ordered today

  • @BiswajyotiDIY
    @BiswajyotiDIYАй бұрын

    ​@@battleboykmpdIt's an alrounder phone .. has some unique features such as Sony camera with Horizon lock , moto gesture ,144hz FHD+ pOled display , IP68 rating , Dolby Atmos ,Dual Speaker , Hi res audio wireless etc ..

  • @suryakiranofficial
    @suryakiranofficial2 ай бұрын

    Which type of screen guard is best

  • @BiswajyotiDIY
    @BiswajyotiDIYАй бұрын

    All screen guards are the best ...but UV glued glass is more durable .

  • @adnanahmad_26
    @adnanahmad_26Ай бұрын

    ​@@BiswajyotiDIYPrice kitna hoga bhai

  • @BiswajyotiDIY
    @BiswajyotiDIYАй бұрын

    @adnanahmad_26 It depends upon quality , I got it for Rs 150 in the local market .

  • @alagurajaabirami2927
    @alagurajaabirami2927Ай бұрын

    please pin uv tempered in this comment ​@@BiswajyotiDIY

  • @angshumandhar2750
    @angshumandhar27502 ай бұрын

    Excellent

  • @user-ed3oy4nr8w
    @user-ed3oy4nr8w2 ай бұрын

    Plz send me product link

  • @expertblue
    @expertblue2 ай бұрын

    debería usar grasa blanca y no lubricante en aerosol, tenía que ser la misma característica y el mismo aspecto físico el potenciómetro; si no conseguiste el mismo potenciómetro está bien lo que hiciste, el sintonizador de radio y la perilla de función debería dejarle como está y el módulo bluetooth tenía que ser esos pequeñitos que se le instala por dentro y ponerle perilla aparte para switch y led azul para luz piloto del bluetooth

  • @BiswajyotiDIY
    @BiswajyotiDIY2 ай бұрын

    Thanks a lot for your valuable suggestion ... Thanks for watching

  • @rupjyotihazarika2513
    @rupjyotihazarika25132 ай бұрын

    best restoration.🎉

  • @simplenerdylife786
    @simplenerdylife7862 ай бұрын

    Moi ata xoru lora aru mor ze ki bhaigyo, akhon Tinkle nepalu jibonot. 😭😭😭😭😭🙏🙏

  • @MonalisaNiyogi
    @MonalisaNiyogi2 ай бұрын

    Darun

  • @karthikgrcbe6861
    @karthikgrcbe68613 ай бұрын

    Post video of front and rear charging ports

  • @BiswajyotiDIY
    @BiswajyotiDIY3 ай бұрын

    Front USB port is already uploaded ...

  • @karthikgrcbe6861
    @karthikgrcbe68613 ай бұрын

    part number

  • @bathri6088
    @bathri60883 ай бұрын

    I did everything right but it didnt work

  • @BiswajyotiDIY
    @BiswajyotiDIY3 ай бұрын

    You need to repartition the new ssd from the device manager .

  • @Mitakshara7037
    @Mitakshara70374 ай бұрын

    Very useful video Thank you, please make an Video on how to change ferrite rod for good MW Reception, and make an Video for Backlight in Xhdata D-219. Thank you 🎉

  • @pratikjoshi8822
    @pratikjoshi88224 ай бұрын

    Pls Send me buy link or item name ??????

  • @manasborua4078
    @manasborua40784 ай бұрын

    Borhiyaa, tight k fitting hoi ne

  • @BiswajyotiDIY
    @BiswajyotiDIY4 ай бұрын

    এক দম ।

  • @manasborua4078
    @manasborua40784 ай бұрын

    Borhiyaa

  • @indradeepsengupta2865
    @indradeepsengupta28654 ай бұрын

    from where we can buy it online?

  • @BiswajyotiDIY
    @BiswajyotiDIY4 ай бұрын

    you can buy it from www.boodmo.com

  • @amolkadam-xl4lu
    @amolkadam-xl4lu4 ай бұрын

    Pls send me link of items

  • @GeorgeGhoshBD
    @GeorgeGhoshBD4 ай бұрын

    we have bbc in Bangladesh at FM 100.0 MHz.

  • @ashokash7475
    @ashokash74754 ай бұрын

    Where can i get that white Cable attachment

  • @BiswajyotiDIY
    @BiswajyotiDIY4 ай бұрын

    You can buy it from a local electronics shop or online.. it is called "USB male female Cable " .

  • @mann4767
    @mann47673 ай бұрын

    How much it cost at shop ???

  • @rupjyotihazarika2513
    @rupjyotihazarika25134 ай бұрын

    Mozaa lagisa. Kot pai.

  • @BiswajyotiDIY
    @BiswajyotiDIY4 ай бұрын

    শিৱসাগৰৰ শিৱৰাত্রী মেলাত পায় ।

  • @user-nb9is5gg7u
    @user-nb9is5gg7u5 ай бұрын

    From where can buy this??

  • @BiswajyotiDIY
    @BiswajyotiDIY5 ай бұрын

    You can buy it from www.boodmo.com

  • @pratikjoshi8822
    @pratikjoshi88224 ай бұрын

    Pls item name and link send me...

  • @RitikGoswami
    @RitikGoswami5 ай бұрын

    How is the charging speed in this? In my car it is charging extremely slow

  • @BiswajyotiDIY
    @BiswajyotiDIY5 ай бұрын

    Yes...Charging speed is very slow as it is only made for pendrive and android auto.. better you may go for a quick charger for the cigarette lighter port of your car..

  • @RitikGoswami
    @RitikGoswami5 ай бұрын

    @@BiswajyotiDIY thanks for replying

  • @rupjyotihazarika2513
    @rupjyotihazarika25135 ай бұрын

    Mozaaaa.🎉

  • @remopkr198
    @remopkr1985 ай бұрын

    I prefer AA

  • @BiswajyotiDIY
    @BiswajyotiDIY5 ай бұрын

    Thanks for watching ...

  • @poragjyotidutta5734
    @poragjyotidutta57345 ай бұрын

    সুন্দৰ

  • @animeshsaha6415
    @animeshsaha64156 ай бұрын

    Can you share the preloaded songs drive link with me?

  • @Billiemarie1000
    @Billiemarie10006 ай бұрын

    Of course you could have just used two rechargeable AA batteries... I keep them on hand myself

  • @BiswajyotiDIY
    @BiswajyotiDIY6 ай бұрын

    Yes...but you also needed to carry a charger ..and it's so irritating to remove the batteries to charge each time

  • @ChhandaDas1961
    @ChhandaDas19617 ай бұрын

    Why not use a USB power bank module with 18650 cells and connect it to the 5v port at the top of the radio ? 18650 cells are much safer and cheaper ...

  • @BiswajyotiDIY
    @BiswajyotiDIY7 ай бұрын

    The size of the 18650 battery is thicker than BL5C . it does not fit inside the radio as the Xhdata D219 Radio is very Slim.

  • @BiswajyotiDIY
    @BiswajyotiDIY7 ай бұрын

    because there is no space inside the radio to fit the 18650 cells.

  • @ChhandaDas1961
    @ChhandaDas19617 ай бұрын

    @@BiswajyotiDIY Could you not make a powerbank with the 18650 cells and plug it into the 5 volt port of the radio ?

  • @BiswajyotiDIY
    @BiswajyotiDIY7 ай бұрын

    Yes ..but it would not be handy with the external power bank .. 😊

  • @Himalayan_Stallion
    @Himalayan_Stallion3 ай бұрын

    i have bought reachargeable aa battries using them

  • @niteshmandal7551
    @niteshmandal75518 ай бұрын

    Did you connect it to 5v input or to the battery input

  • @niteshmandal7551
    @niteshmandal75518 ай бұрын

    You should connect the charging module input to the 5v input pin of the radio and the charging module battery output to the battery terminals with a 3.3v boost and Buck converter regulator

  • @BiswajyotiDIY
    @BiswajyotiDIY8 ай бұрын

    I have connected the BMS into the 5v socket of the Radio and connected the battery output to the battery terminals as the BL 5c Battery Provides 3.7V output.and it has an inbuilt bms circuit which converts the 5v into 3.7v ..

  • @niteshmandal7551
    @niteshmandal75518 ай бұрын

    BL5c battery inbuilt protection board doesn't convert 4.2v to 3.7v and it is just to protect the battery from over draining ie: less than 2.4v so that the lipo doesn't get permanently discharged. The connection that you've made by directly connecting the BL5c directly to the battery input is degrading the life of your components as they are getting over voltage and will give up soon and also if you try to put cells in the radio the cells will get leaked because they will reciever reverse current from the lipo battery so modify it by connecting a 3.3v buck and boost converter to battery output of the charging board and connect a diode in between the battery connector positive and input on the pcb and also connect the 3.3v buck and boost converter output to the pcb input directly and not on the external battery terminal

  • @BiswajyotiDIY
    @BiswajyotiDIY8 ай бұрын

    you can directly connect it to the battery terminal of D219 ..it works perfectly as the BL5C and TP4056 BMS provide 3.7v output .. SI4825 IC runs from 2 v to 3.6V ...0.1v does nothing. (It will drop while travelling through resistors of the internal circuit ) 😊 (You can check the voltage with a multimeter ) but you have to charge the battery in the switch off position. If you still have doubts then you can connect a 7803 (3v) voltage. regulator. (Plz do it at your own risk. I am not responsible for any loss or damage )

  • @niteshmandal7551
    @niteshmandal75518 ай бұрын

    If you turn on your radio by mistake someday while it is on charge it will blow up because the tp4056 will throw 4.12 - 4.2 volts @ 1amp straight into your radio curcit and the radio curcit is designed for 3.6v +-1% @ 350ma max hence it will blow up! Phew Anyway I'm not even going to open it up cause I use AA 900mah rechargeable batteries and they last for a month, I do a lot of electronics stuff but I do like to keep things simple and prefer equipment safely before modifying electronics gadgets.

  • @ashusaini8
    @ashusaini88 ай бұрын

    Not recommended, because Li-ion battery reach upto 4.2 volts but D-219 internal IC SI4825 design for 2V to 3.6V , So not recommended at all.

  • @BiswajyotiDIY
    @BiswajyotiDIY8 ай бұрын

    but you can add resistance or a 3v voltage regulator i.e 7803...or the input DC port of d219 supports 5V as it has an inbuilt voltage regulator .The SI4825 chip runs from 2v to 3.6v . BL 5c battery and TP 4056 BMS module provides 3.7v. 0.1 v does nothing .. 😊

  • @randomguy1601
    @randomguy16012 ай бұрын

    It probably does have a voltage regulator, I run mine with a removable 14500 AA size lithium battery, with a AA size Battery shaped paper roll with a copper wire in the middle to short one end to the other, and put the battery and the dummy battery together in the chamber and close the lid. It works absolutely fine...

  • @radioenthusiastD368
    @radioenthusiastD3689 ай бұрын

    Bro tunning scale wrong hai, yeh station mw(am) me 1422khz pe aata hai

  • @BiswajyotiDIY
    @BiswajyotiDIY9 ай бұрын

    Yes...and Raat ko Short wave pe bhi aata hai..

  • @user-hp8xn9kn3p
    @user-hp8xn9kn3p9 ай бұрын

    Very useful video. I think, this is the first video on youtube to convert rechargable d-219. Thanks.

  • @BiswajyotiDIY
    @BiswajyotiDIY9 ай бұрын

    Thanks for watching ...Plz subscribe for more videos ..😊

  • @travelandfilming
    @travelandfilming9 ай бұрын

    Jet planes. It’s called contrail.

  • @BiswajyotiDIY
    @BiswajyotiDIY9 ай бұрын

    Thanks for watching ..plz subscribe for more videos..

  • @rupjyotihazarika2513
    @rupjyotihazarika25139 ай бұрын

    BBC.😮

  • @rupjyotihazarika2513
    @rupjyotihazarika25139 ай бұрын

    Moza.

  • @tariksamsun
    @tariksamsun9 ай бұрын

    👍👍

  • @rupjyotihazarika2513
    @rupjyotihazarika25139 ай бұрын

    Mozaa kam.koriso.🎉 val hoisa.

  • @BiswajyotiDIY
    @BiswajyotiDIY9 ай бұрын

    Thank you..

  • @rupjyotihazarika2513
    @rupjyotihazarika25139 ай бұрын

    Mozaa.❤❤❤

  • @BiswajyotiDIY
    @BiswajyotiDIY9 ай бұрын

    আচৰিত ন? 😊

  • @steezylil6911
    @steezylil69119 ай бұрын

    Bro can we use it with plugging into current without battery?

  • @BiswajyotiDIY
    @BiswajyotiDIY9 ай бұрын

    Yes..you can ...with the help of 5v adapter (round pin )

  • @BiswajyotiDIY
    @BiswajyotiDIY9 ай бұрын

    Or you can make it rechargable ... Just check it out... kzread.info/dash/bejne/lHWEk8Wcm8erftI.htmlsi=f8LWxP0BxgC5x9hJ

  • @BiswajyotiDIY
    @BiswajyotiDIY9 ай бұрын

    It's brand new .. 😊

  • @rupjyotihazarika2513
    @rupjyotihazarika25139 ай бұрын

    Very nice collection.😮

  • @RuneTheFirst
    @RuneTheFirst10 ай бұрын

    Looks more like a mono portable recorder than a deck. Too shaky to examine. You do know the difference in terms, right?

  • @BiswajyotiDIY
    @BiswajyotiDIY10 ай бұрын

    actually it is a car player ,it was used in commercial vehicles in india ..such as Bus, Truck etc .. and It's a stereo .. It has two 6283Ic in a bridge mode with 2 channel outputs .we called it as "Golden Deck" in india . As it uses Golden Mechanism (a special type of mechanism that was used in old cassette copiers with less wow and flatter ) Thanks for watching ...plz Subscribe for more videos ..