can you test the small plenum in conjunction with the original plenum hollow .. I know it will make the length of pull longer. but such more can you get?
@Nico-Max636 ай бұрын
No bad without wind 😉
@fasnuf6 ай бұрын
That one has the same issue as my 640. The center of the image is darker than the surrounding. This is a software issue with the ATN's and I'm not sure why they don't fix it.
@MasonStormSunny7 ай бұрын
There is something wrong with the BCs which you provided. FX Hybrids .30 BC is 0.068. JSB KO .30 BC is 0.09.
@hunterx22108 ай бұрын
Hi, I got the gun, I have question, do you think it's possible for the gun to penetrate a deer at about 100 yards to 200 yards ? Like if so, how much pressure does it need and caliber size to do that
@blackcreekairgunner8 ай бұрын
NO! ABSOLUTELY NOT. Even with a big bore you need to stay under 100 yards
@larry112519568 ай бұрын
I have both a 22 and a 30 Maverick. Right now they are both sniper configuration. What are your tune setting and are all the internals stock?
@cristianmihai4818 Жыл бұрын
Is this the piece that limits the pressure to 220?
@blackcreekairgunner Жыл бұрын
No. This is the stem that holds the bottle valve closed
@cristianmihai4818 Жыл бұрын
@@blackcreekairgunner Looking for a tutorial to turn the M3 220bar to 300bar. I thought is that easy :-)
@blackcreekairgunner Жыл бұрын
You cant as far as i know. Its a completely different valve.
@fredyzzz007ify Жыл бұрын
and if i had wings i would fly 😅 great vid bro, love ur set up
@Xcorp1on Жыл бұрын
Hey bud, great videos. Is that the 400mm handguard from edgun shop? U had no issue with the emperor fitting into place? Ive got an extended donnyfl fatboy 2 vulcan threaded an im considering the 600mm barrel w/423.5mm carbon handguard but im not sure if the mod would fit
@blackcreekairgunner Жыл бұрын
It is the edgun handguard. I had a custom adapter made to match the edgun moderator. There is about 1/2-3/4” between the handguard and moderator
@Jason-Smith1 Жыл бұрын
Homey, did you just get out of the hospital?
@blackcreekairgunner Жыл бұрын
??
@safakaswedishairgunforum-n1490 Жыл бұрын
Well done👍🔫
@daveyJ213 Жыл бұрын
Love your set up, beautiful; seriously considering the Leshiy for purchase soon. What barrel length are you running? What moderator? Notice you have a tank on your gun. When you fill through the air port does the air go only into the bottom tank or into both upper and lower tanks at the same time? Your scope set up looks amazing also; what is that? Thanks for posting and sharing.
@blackcreekairgunner Жыл бұрын
600mm 30cal. Custom donnyfl emperor. It fills the tank and upper reservoir. ATN 4K pro 5-20
@kansasairhunters2057 Жыл бұрын
I didnt know that that digital guage fit on the maverick. Thanks.
@blackcreekairgunner Жыл бұрын
Yup. I LOVE sekhmet gauges!!
@chrisfigueroa3361 Жыл бұрын
Awesome shooting buddy thanks for sharing bsafe buddy 👍
@tmrogin1466 Жыл бұрын
Yds to target ?? Tom
@blackcreekairgunner Жыл бұрын
Its in the vid haha 37yards
@tmrogin1466 Жыл бұрын
What were FPE AT MOSEL FPE POINT OF IMPACT GRAIN WEIGHT AND FTS AT MOSSEL GOOD SHOOTING. GOOD KILL TOM
@blackcreekairgunner Жыл бұрын
990fps @ muzzle 148fpe @ muzzle .1 BC 945fps @ POI 135fpe @ POI
@myadventureman2636 Жыл бұрын
😁
@Bornamortezaei Жыл бұрын
That ist better than Fx Impact M3 ???
@blackcreekairgunner Жыл бұрын
You cant compare the two guns. They are both as accurate as your knowledge to tune them
@chriwisan Жыл бұрын
Nice shooting - which barrel is installed Alfa or Walther?
@blackcreekairgunner Жыл бұрын
Alfa
@Loojmemhav Жыл бұрын
I also wonder if the BC’s are reversed as seen on your video. The manufacturer’s BC for the Knockout is 0.09 and you have it at 0.075 versus the Hybrid slug with shown BC of .095 and the manufacturer’s BC is at 0.07. It would be nice if you can post another video showing us that those BC’s are actually as you have them. Thanks.
@blackcreekairgunner Жыл бұрын
Keep in mind that the BC changes with speed and elevation and a lot of other factors. The manufacture PC is just a close reference point sense that BC was generated in a specific area that they ran that number. If you had a lab radar your BC for your specific area would be different. That’s why when we go hunting in different states we resight our scope.
@Loojmemhav Жыл бұрын
@@blackcreekairgunner I’m always under the understanding that once you’ve sighted in your rifle and have all your sight-in conditioned entered into a ballistic app, the hold over is calculated at a different location once all those conditions are collected and entered into the app or calculator. It would not make sense to resight your gun if you go from say sea level to your hunting area at 5000 feet ASL. That’s why we all pay $$$ for those advance apps like Applied Ballistics or Strelok Pro.🤷♂️ And, who carries their lab radar with them every time they go hunting, right?
@blackcreekairgunner Жыл бұрын
Well i use ATN scopes so its kind of like cheating lol. I take a couple shots. Rezero and i let the ATN ABL recalculate my POA at the yardage of the POI then im ready to hunt. Even though technically the bc changes it dosent matter to me since most big game is a 4” shot zone anyways so if im a hair off it still goes down :)
@blackcreekairgunner Жыл бұрын
It would probably help for you to talk to a lot of the competitors at RMAC they could explain better. They will all tell you that once you get that big of a difference in elevation your POI is significantly changed.
@Loojmemhav Жыл бұрын
Of course it would and I’m saying you wouldn’t need to re-zero your rifle once it is done. Your ballistic calculator will do the rest for you where ever you hunt.
@Loojmemhav Жыл бұрын
How is it that your impacts get higher as you shot them further?
@blackcreekairgunner Жыл бұрын
Good question. I didn’t even notice that. I’m wondering if its maybe the shot curve since my scope is sighted in at 50 yards. as fast as that ammo is moving I should probably sight in at 75 that way 50 yards is a little low and 100 yards is a little low. I’ll have to go back and do some more shot strings and check that out.
@Loojmemhav Жыл бұрын
Curious… how do you get a pressure reading of 29.98 inHg at 890’ elevation? Are you sure it’s not 28.98?
@blackcreekairgunner Жыл бұрын
850’ elevation. Pressure at my house ranges from 29.97 - 30.12 depending on the time of day, temp, and humidity
@Loojmemhav Жыл бұрын
Well I must be getting my physics all messed up but I’m at 30’ asl and my atm is 29.97 inHg. So I’m lost. And everywhere I searched for every 1000’ gain in elevation there’s a 1” drop in pressure so I’m really confused.
@blackcreekairgunner Жыл бұрын
🤷🏼♂️not sure. I have a device at my house that gives me all the local info for my specific location. Pressure. Humidity. Temp. Wind. Etc….
@Loojmemhav Жыл бұрын
I think your device is showing you the “corrected” pressure. However, I’m not sure if it would be correct if you use that pressure in a ballistic app to calculate your holdover. 🤔 This is what’s causing your groups to shoot high down range.
@G79911997 Жыл бұрын
Are you using a heavy slug liner, or is that the STX pellet liner? I'm doing some testing out of my 700mm pellet liner while I wait for my heavy 700mm liner to arrive... Heard 990fps is the sweet spot......🧐
@blackcreekairgunner Жыл бұрын
STX
@G79911997 Жыл бұрын
Do you have a slug kit installed for the Maverick?
@blackcreekairgunner Жыл бұрын
No. Its the liner it came with
@michaelcary38872 жыл бұрын
Hello sir were you testing the repr regulator on the leshiy2? Just curious on what regulator you are using.
@blackcreekairgunner2 жыл бұрын
At the time of the video i was using an experimental regulator from Huma Air. It is a great reg!! Currently i switched to the REPR because i like the external adjustment
@jbhk7977 Жыл бұрын
@@blackcreekairgunner I use the Huma Raptor external reg. That thing works awesome.
@ralphwhittaker37662 жыл бұрын
Liners?
@blackcreekairgunner2 жыл бұрын
The standard 30cal 600mm liner it comes with
@blackcreekairgunner2 жыл бұрын
Sorry i meant 700mm
@Monkeydad19692 жыл бұрын
Yeah, Chad's second hunt that year was AWESOME! I need to go again. Oh yeah...how did you really like them .35 Hades? Nice, huh?
@Monkeydad19692 жыл бұрын
IDK how I didn't see this vid. Glad to see how your particular rig shoots them. I'll have to get you the .35 Hades once they get in. Thanks for the testing. Predator Pellets approves!
@blackcreekairgunner2 жыл бұрын
That would be awesome!! My m3 35 has the new power block and i have the tungsten hammer preordered. Also i put on the new STTRS rail
@blackcreekairgunner2 жыл бұрын
Also the funny thing is is I tagged you in the video link when I first put it out you’re slacking haha
@Monkeydad19692 жыл бұрын
@@blackcreekairgunner had another KZreadr tag me and it didn't come up. If you tag my name or Predator it's definitely not going to alert me. Did you tag me on Instagram or Facebook?
@blackcreekairgunner2 жыл бұрын
I tagged your real name on facebook
@stevep76082 жыл бұрын
Just ordered my .30 500mm maverick barrel today. Can’t wait. Great vid.
@blackcreekairgunner2 жыл бұрын
The maverick is amazing! It is not really picky on ammo
@ianp67422 жыл бұрын
Can you change the caliber on these by changing the barrel/magazine?
@blackcreekairgunner2 жыл бұрын
Correct. All you need is a different barrel and magazine. Quick 5min swap
@blackcreekairgunner2 жыл бұрын
If you’re going up in caliber and we also want to swap your jets otherwise you may end up with low power
@ianp67422 жыл бұрын
@@blackcreekairgunner thanks for the quick reply. These things are amazing, gotta be the ultimate backyard hunter and then some.
@n2shooter2 жыл бұрын
Thanks for this testing! I was wondering since you are using the ATN X-Sight 4K Pro with the ABL rangefinder add-on, do you use the built in Ballistics Calculator? I use the built in Ballistics Calculator exclusively and I can easily move from pest at 20 yards to 100 yards with the click of the range button! 😃 I also recommend using the ATN X-Trac remote, as that allows me to keep my shooting stance. I put the remote right around the bottle.
@blackcreekairgunner2 жыл бұрын
Yes i use the ballistics ALL the time. I have a labradar i use to calculate bc so the ATN is super accurate. I also have the ATN Thor 4
@n2shooter2 жыл бұрын
@@blackcreekairgunner Awesome! I also have an ATN Thor 4 with ABL!
@dougiefresh37672 жыл бұрын
I use the ballistics calculator with a cheap muddy rangefinder and it's still pretty accurate out to about the same. 90-100 yards. The only thing I don't like in the ATN is when you try to add your BC in it doesn't let you put 0.045. it will put a .4 or something.
@blackcreekairgunner2 жыл бұрын
Your right the internal ballistics math is VERY loose. Im not sure why they programmed it that way
@dougiefresh37672 жыл бұрын
@@blackcreekairgunner All in all its still a great piece of equipment. I'll be on the look out for more of your vids. I love to see people use the ATN scopes with air rifles.
@Oregon-airguns2 жыл бұрын
Hey that’s great shooting man! Don’t let anyone tell you otherwise!! People love to take photos of their .5 inch groups at 100,200,300 yards but they never seem to video it. Haha. I’d say if squirrel hunting you wouldn’t have missed
@blackcreekairgunner2 жыл бұрын
Thx man!
@silverload36222 жыл бұрын
Great shooting!!I tell people my pellet gun shoots little water balloons at 100 yards and are dumbfounded when I pull out my Leashy2 lol
@dontamad86002 жыл бұрын
Nice clean shot…
@dontamad86002 жыл бұрын
Is the 30 cak knockout on the market already?
@blackcreekairgunner2 жыл бұрын
Not yet but it will be shortly
@dontamad86002 жыл бұрын
@@blackcreekairgunner ic, what gr are they available? I just subscribed to to your channel..
@blackcreekairgunner2 жыл бұрын
For now they come in 50.15 grain. Not sure if they will offer other weights
@saviofalcao6702 жыл бұрын
Hi . What presure your regs set at?
@blackcreekairgunner2 жыл бұрын
135/170
@jaredkline64562 жыл бұрын
135 on your final reg and 170 on first reg
@tmrogin14662 жыл бұрын
Thanks for the comeback You might want to try the. NSA 49.5 IN 30 CAL I am getting very good results,less than MOA AT 50 YDS Also take a look at Tim Swans channel about his HARMONIC TUNNER THANKS TOM
@tmrogin14662 жыл бұрын
I just subscribed to your channel Seems we have the same equipment IHave a Crown 30CAL 700mm A DREAMLINE 177 for inside the barn An Impact Mark 2 ,25 cal because that won Extreme Bench Rest that year A Maverick 30 cal 700mm I REALLY LIKE THAT SHOOTS REALLY REALLY WELL And A Mark III. THAT I AM JUST LEARNING I APPRECIATE THE DETAIL. WOULD LIKE TO SEE FPE AT POI NEED 60 AT 60YDS FOR COYOTES KEEP THE DETAIL COMING THANKS TOM
@blackcreekairgunner2 жыл бұрын
The hybrids are 81.3fpe at 60y and the knockouts are 82.6fpe at 60y
@ColoradoAirgunner2 жыл бұрын
Great video bro! Hey, you've got mail! 🤣 I sure envy your personal shooting range. Keep those videos coming!
@blackcreekairgunner2 жыл бұрын
Come on over and help me shoot some long range stuff!!
@Oregon-airguns2 жыл бұрын
Damn thinking about turning my Vulcan 3 down to shoot the 54.5G slugs closer to 920fps. Don’t get me wrong, it shoots amazing at 990fps but I’m only getting like 25 shots per fill. I bet if I turned it down to 920-930fps I’d get like 40 shots per fill maybe more! And it seems these alpha barrels are very accurate with nsa slugs even at slower speeds!
@chrisfigueroa33612 жыл бұрын
Awesome shooting buddy 👏
@johnnyventurino89472 жыл бұрын
I like the Maverick better then the Impact. Its better in every way and most of all its more powerful. I own a Edgun Leshyi Classic and Leyla in 25 caliber and if I buy another PCP it will be a Maverick or Crown for long distance. Great video.
@kraftzion2 жыл бұрын
I just bent the pegs that slide into the hole slightly past 90 degrees.
@richardmoore56752 жыл бұрын
Just put a drop of super glue where the spring goes thru the hole
@jumperstartful2 жыл бұрын
@@richardmoore5675 Thanks ,that was my first thought. Just put a small drop of super glue to hold the spring in.
@margaretsevere28922 жыл бұрын
That is one of the best info. I have on You Tube. Thanks so much
@XPLAWD2 жыл бұрын
Great Shooting! Subscribed!
@davidxcell81052 жыл бұрын
Amazing group??! Is that LW or Alpha barrel?
@blackcreekairgunner2 жыл бұрын
Alpha 600mm 30cal
@henrygarcia60782 жыл бұрын
I haven't had that issue but it seems it wouldn't hurt doing your mod anyway, good recommendation. You just earned another subscriber Thanks
@blackcreekairgunner2 жыл бұрын
Thx man!!
@chasesmoak112 жыл бұрын
Can you adjust the holds on that reticle for your particular caliber? If so, what’s the SOP?
@blackcreekairgunner2 жыл бұрын
Yes but not in the way your thinking. You create a profile for your gun. FPS, BC, scope height, ballistic type. Once you enter all that all you meed to do is enter the range of your target and it adjusts your POI. Also when you incline or decline your gun it adjusts the POI
@chasesmoak112 жыл бұрын
@@blackcreekairgunner gotcha, so I can’t really use it as a true stand a lone MIL/MRAD system for measuring and holds. It’s dependent on the smart ballistics calculator? Correct me if I’m wrong
@blackcreekairgunner2 жыл бұрын
I have never used it for that but you should be able to. You can actually choose MIL or MOA and then choose how many MIL or MOA dots you want on the reticle
@chasesmoak112 жыл бұрын
@@blackcreekairgunner rgr that. They should do a better job addressing this in the program but it is what it is haha. Rock on
@blackcreekairgunner2 жыл бұрын
Yeah there is a lot of features that they don’t really address and explain to people. You kinda have to figure it out yourself. It is a really good scope. I also have the ATN Thor 4 640 4-40
@riaandewinnaar50402 жыл бұрын
First shot might be reg creep
@blackcreekairgunner2 жыл бұрын
Thats definitely a possibility
@ebani552 жыл бұрын
Блин
@ebani552 жыл бұрын
На днях пришёл аппарат,а отстрелять некогда ,то дела ,то погода хрень
Пікірлер
can you test the small plenum in conjunction with the original plenum hollow .. I know it will make the length of pull longer. but such more can you get?
No bad without wind 😉
That one has the same issue as my 640. The center of the image is darker than the surrounding. This is a software issue with the ATN's and I'm not sure why they don't fix it.
There is something wrong with the BCs which you provided. FX Hybrids .30 BC is 0.068. JSB KO .30 BC is 0.09.
Hi, I got the gun, I have question, do you think it's possible for the gun to penetrate a deer at about 100 yards to 200 yards ? Like if so, how much pressure does it need and caliber size to do that
NO! ABSOLUTELY NOT. Even with a big bore you need to stay under 100 yards
I have both a 22 and a 30 Maverick. Right now they are both sniper configuration. What are your tune setting and are all the internals stock?
Is this the piece that limits the pressure to 220?
No. This is the stem that holds the bottle valve closed
@@blackcreekairgunner Looking for a tutorial to turn the M3 220bar to 300bar. I thought is that easy :-)
You cant as far as i know. Its a completely different valve.
and if i had wings i would fly 😅 great vid bro, love ur set up
Hey bud, great videos. Is that the 400mm handguard from edgun shop? U had no issue with the emperor fitting into place? Ive got an extended donnyfl fatboy 2 vulcan threaded an im considering the 600mm barrel w/423.5mm carbon handguard but im not sure if the mod would fit
It is the edgun handguard. I had a custom adapter made to match the edgun moderator. There is about 1/2-3/4” between the handguard and moderator
Homey, did you just get out of the hospital?
??
Well done👍🔫
Love your set up, beautiful; seriously considering the Leshiy for purchase soon. What barrel length are you running? What moderator? Notice you have a tank on your gun. When you fill through the air port does the air go only into the bottom tank or into both upper and lower tanks at the same time? Your scope set up looks amazing also; what is that? Thanks for posting and sharing.
600mm 30cal. Custom donnyfl emperor. It fills the tank and upper reservoir. ATN 4K pro 5-20
I didnt know that that digital guage fit on the maverick. Thanks.
Yup. I LOVE sekhmet gauges!!
Awesome shooting buddy thanks for sharing bsafe buddy 👍
Yds to target ?? Tom
Its in the vid haha 37yards
What were FPE AT MOSEL FPE POINT OF IMPACT GRAIN WEIGHT AND FTS AT MOSSEL GOOD SHOOTING. GOOD KILL TOM
990fps @ muzzle 148fpe @ muzzle .1 BC 945fps @ POI 135fpe @ POI
😁
That ist better than Fx Impact M3 ???
You cant compare the two guns. They are both as accurate as your knowledge to tune them
Nice shooting - which barrel is installed Alfa or Walther?
Alfa
I also wonder if the BC’s are reversed as seen on your video. The manufacturer’s BC for the Knockout is 0.09 and you have it at 0.075 versus the Hybrid slug with shown BC of .095 and the manufacturer’s BC is at 0.07. It would be nice if you can post another video showing us that those BC’s are actually as you have them. Thanks.
Keep in mind that the BC changes with speed and elevation and a lot of other factors. The manufacture PC is just a close reference point sense that BC was generated in a specific area that they ran that number. If you had a lab radar your BC for your specific area would be different. That’s why when we go hunting in different states we resight our scope.
@@blackcreekairgunner I’m always under the understanding that once you’ve sighted in your rifle and have all your sight-in conditioned entered into a ballistic app, the hold over is calculated at a different location once all those conditions are collected and entered into the app or calculator. It would not make sense to resight your gun if you go from say sea level to your hunting area at 5000 feet ASL. That’s why we all pay $$$ for those advance apps like Applied Ballistics or Strelok Pro.🤷♂️ And, who carries their lab radar with them every time they go hunting, right?
Well i use ATN scopes so its kind of like cheating lol. I take a couple shots. Rezero and i let the ATN ABL recalculate my POA at the yardage of the POI then im ready to hunt. Even though technically the bc changes it dosent matter to me since most big game is a 4” shot zone anyways so if im a hair off it still goes down :)
It would probably help for you to talk to a lot of the competitors at RMAC they could explain better. They will all tell you that once you get that big of a difference in elevation your POI is significantly changed.
Of course it would and I’m saying you wouldn’t need to re-zero your rifle once it is done. Your ballistic calculator will do the rest for you where ever you hunt.
How is it that your impacts get higher as you shot them further?
Good question. I didn’t even notice that. I’m wondering if its maybe the shot curve since my scope is sighted in at 50 yards. as fast as that ammo is moving I should probably sight in at 75 that way 50 yards is a little low and 100 yards is a little low. I’ll have to go back and do some more shot strings and check that out.
Curious… how do you get a pressure reading of 29.98 inHg at 890’ elevation? Are you sure it’s not 28.98?
850’ elevation. Pressure at my house ranges from 29.97 - 30.12 depending on the time of day, temp, and humidity
Well I must be getting my physics all messed up but I’m at 30’ asl and my atm is 29.97 inHg. So I’m lost. And everywhere I searched for every 1000’ gain in elevation there’s a 1” drop in pressure so I’m really confused.
🤷🏼♂️not sure. I have a device at my house that gives me all the local info for my specific location. Pressure. Humidity. Temp. Wind. Etc….
I think your device is showing you the “corrected” pressure. However, I’m not sure if it would be correct if you use that pressure in a ballistic app to calculate your holdover. 🤔 This is what’s causing your groups to shoot high down range.
Are you using a heavy slug liner, or is that the STX pellet liner? I'm doing some testing out of my 700mm pellet liner while I wait for my heavy 700mm liner to arrive... Heard 990fps is the sweet spot......🧐
STX
Do you have a slug kit installed for the Maverick?
No. Its the liner it came with
Hello sir were you testing the repr regulator on the leshiy2? Just curious on what regulator you are using.
At the time of the video i was using an experimental regulator from Huma Air. It is a great reg!! Currently i switched to the REPR because i like the external adjustment
@@blackcreekairgunner I use the Huma Raptor external reg. That thing works awesome.
Liners?
The standard 30cal 600mm liner it comes with
Sorry i meant 700mm
Yeah, Chad's second hunt that year was AWESOME! I need to go again. Oh yeah...how did you really like them .35 Hades? Nice, huh?
IDK how I didn't see this vid. Glad to see how your particular rig shoots them. I'll have to get you the .35 Hades once they get in. Thanks for the testing. Predator Pellets approves!
That would be awesome!! My m3 35 has the new power block and i have the tungsten hammer preordered. Also i put on the new STTRS rail
Also the funny thing is is I tagged you in the video link when I first put it out you’re slacking haha
@@blackcreekairgunner had another KZreadr tag me and it didn't come up. If you tag my name or Predator it's definitely not going to alert me. Did you tag me on Instagram or Facebook?
I tagged your real name on facebook
Just ordered my .30 500mm maverick barrel today. Can’t wait. Great vid.
The maverick is amazing! It is not really picky on ammo
Can you change the caliber on these by changing the barrel/magazine?
Correct. All you need is a different barrel and magazine. Quick 5min swap
If you’re going up in caliber and we also want to swap your jets otherwise you may end up with low power
@@blackcreekairgunner thanks for the quick reply. These things are amazing, gotta be the ultimate backyard hunter and then some.
Thanks for this testing! I was wondering since you are using the ATN X-Sight 4K Pro with the ABL rangefinder add-on, do you use the built in Ballistics Calculator? I use the built in Ballistics Calculator exclusively and I can easily move from pest at 20 yards to 100 yards with the click of the range button! 😃 I also recommend using the ATN X-Trac remote, as that allows me to keep my shooting stance. I put the remote right around the bottle.
Yes i use the ballistics ALL the time. I have a labradar i use to calculate bc so the ATN is super accurate. I also have the ATN Thor 4
@@blackcreekairgunner Awesome! I also have an ATN Thor 4 with ABL!
I use the ballistics calculator with a cheap muddy rangefinder and it's still pretty accurate out to about the same. 90-100 yards. The only thing I don't like in the ATN is when you try to add your BC in it doesn't let you put 0.045. it will put a .4 or something.
Your right the internal ballistics math is VERY loose. Im not sure why they programmed it that way
@@blackcreekairgunner All in all its still a great piece of equipment. I'll be on the look out for more of your vids. I love to see people use the ATN scopes with air rifles.
Hey that’s great shooting man! Don’t let anyone tell you otherwise!! People love to take photos of their .5 inch groups at 100,200,300 yards but they never seem to video it. Haha. I’d say if squirrel hunting you wouldn’t have missed
Thx man!
Great shooting!!I tell people my pellet gun shoots little water balloons at 100 yards and are dumbfounded when I pull out my Leashy2 lol
Nice clean shot…
Is the 30 cak knockout on the market already?
Not yet but it will be shortly
@@blackcreekairgunner ic, what gr are they available? I just subscribed to to your channel..
For now they come in 50.15 grain. Not sure if they will offer other weights
Hi . What presure your regs set at?
135/170
135 on your final reg and 170 on first reg
Thanks for the comeback You might want to try the. NSA 49.5 IN 30 CAL I am getting very good results,less than MOA AT 50 YDS Also take a look at Tim Swans channel about his HARMONIC TUNNER THANKS TOM
I just subscribed to your channel Seems we have the same equipment IHave a Crown 30CAL 700mm A DREAMLINE 177 for inside the barn An Impact Mark 2 ,25 cal because that won Extreme Bench Rest that year A Maverick 30 cal 700mm I REALLY LIKE THAT SHOOTS REALLY REALLY WELL And A Mark III. THAT I AM JUST LEARNING I APPRECIATE THE DETAIL. WOULD LIKE TO SEE FPE AT POI NEED 60 AT 60YDS FOR COYOTES KEEP THE DETAIL COMING THANKS TOM
The hybrids are 81.3fpe at 60y and the knockouts are 82.6fpe at 60y
Great video bro! Hey, you've got mail! 🤣 I sure envy your personal shooting range. Keep those videos coming!
Come on over and help me shoot some long range stuff!!
Damn thinking about turning my Vulcan 3 down to shoot the 54.5G slugs closer to 920fps. Don’t get me wrong, it shoots amazing at 990fps but I’m only getting like 25 shots per fill. I bet if I turned it down to 920-930fps I’d get like 40 shots per fill maybe more! And it seems these alpha barrels are very accurate with nsa slugs even at slower speeds!
Awesome shooting buddy 👏
I like the Maverick better then the Impact. Its better in every way and most of all its more powerful. I own a Edgun Leshyi Classic and Leyla in 25 caliber and if I buy another PCP it will be a Maverick or Crown for long distance. Great video.
I just bent the pegs that slide into the hole slightly past 90 degrees.
Just put a drop of super glue where the spring goes thru the hole
@@richardmoore5675 Thanks ,that was my first thought. Just put a small drop of super glue to hold the spring in.
That is one of the best info. I have on You Tube. Thanks so much
Great Shooting! Subscribed!
Amazing group??! Is that LW or Alpha barrel?
Alpha 600mm 30cal
I haven't had that issue but it seems it wouldn't hurt doing your mod anyway, good recommendation. You just earned another subscriber Thanks
Thx man!!
Can you adjust the holds on that reticle for your particular caliber? If so, what’s the SOP?
Yes but not in the way your thinking. You create a profile for your gun. FPS, BC, scope height, ballistic type. Once you enter all that all you meed to do is enter the range of your target and it adjusts your POI. Also when you incline or decline your gun it adjusts the POI
@@blackcreekairgunner gotcha, so I can’t really use it as a true stand a lone MIL/MRAD system for measuring and holds. It’s dependent on the smart ballistics calculator? Correct me if I’m wrong
I have never used it for that but you should be able to. You can actually choose MIL or MOA and then choose how many MIL or MOA dots you want on the reticle
@@blackcreekairgunner rgr that. They should do a better job addressing this in the program but it is what it is haha. Rock on
Yeah there is a lot of features that they don’t really address and explain to people. You kinda have to figure it out yourself. It is a really good scope. I also have the ATN Thor 4 640 4-40
First shot might be reg creep
Thats definitely a possibility
Блин
На днях пришёл аппарат,а отстрелять некогда ,то дела ,то погода хрень