Travel on bikes or on planes. Take a look at what we do in the would of motorcycles from sports bikes to cruisers and join us throughout the adventures.
Those floor boards are sick. Whole thing looks good 🤙
@IvanMorales-nm7hn26 күн бұрын
Samson or bassani
@juanmanuelsalassantiago730029 күн бұрын
🔥🔥🔥👏👏👏
@bigceez706729 күн бұрын
Pinche Nando es CHINGON!!!! 💪🏼💪🏼
@Nandos_garage29 күн бұрын
@@bigceez7067 Thank you brother!!!
@jimmyramirez8844Ай бұрын
Did you have to tune it?????
@Nandos_garage28 күн бұрын
Yes tuning is always recommended when dealing with big air and fuel changed. In this case it’ll mess with both and compression.
@michaelhudson303Ай бұрын
Get a different motorcycle,Harley’s 👎🏾
@jaymeunger8248Ай бұрын
Great video I did the same upgrade everything went smoothly but my headlight is dim and bright won’t work at all been struggling with the trouble shooting.
@PompomgrenadeАй бұрын
Good job! Sounds snappy
@frankfurther3828Ай бұрын
Time for a rear tire
@Nandos_garageАй бұрын
Already replaced right after the video lol.
@djlenster8000Ай бұрын
Will I have to extend the clutch cable on a 23 street glide if I go with 12 inch apes ?
@Nandos_garageАй бұрын
Yes. But there’s a clutch extension kit for it. Ez clutch extension. You can find it on our website. www.nandosgarage.com
@Lucky..BАй бұрын
You want louder pipes in 1954 there was a set of pipes called Chattanooga piper alot of Hot Rod 54 And 57 had them . First set I seen in 25 years was on Matts Channel . HIS Dad started that Antique Bike Shop in North Carolina . When I remember the Name I willget it to you . But it was on the Hot Rod PanHead it should pop up . Wheels threw Time annd yes its Comesright up
@Nandos_garageАй бұрын
Oh nice. I’ll look for it. I’ve seen his channel. Super cool place with all the bike history. Recommended to check out Barber Motorsports museum in Alabama.
@nbowling10trioАй бұрын
Timeserts should've been installed all way round fr
@Nandos_garageАй бұрын
Not needed for this case. Judging by what the customer stated. It was safe to assume it was incorrectly torqued since this was already discussed. Apparently the customer was charged a time-sert from previous mechanic that had redone the work many times and no time sert was done. It was shady to hear. But 60 days later still tuning like a champ. Brought me another build of his. Maybe the first 136 build in Cali. Who knows. Hope to be the first. Thanks for watching!
@freebehindbars8654Ай бұрын
Change that air cleaner. It kills performance.
@eicken99Ай бұрын
Great video 👍🏻
@georgetorres8442Ай бұрын
Awesome work brother. Bike came out fantastic!
@julioastorga892 ай бұрын
How much does something like this cost to get done?
@veronicaespinoza35333 ай бұрын
What size length are the slip on’s?
@Nandos_garage3 ай бұрын
36 inch.
@ronquillofrank84034 ай бұрын
Bro where did you get those turn signal bars at. No one wants to share that info. Crazy nice ride
@Nandos_garage4 ай бұрын
Those are OEM. They come with 2018-2020 softail deluxe.
@ekimandersom44784 ай бұрын
Stunning bike
@rodrigogonzalezjr86025 ай бұрын
Carnal this is an awesome looking Vicla. Where are the engine guard and rear saddle guards from? Also where did you get the pancake mirrors?
@Nandos_garage4 ай бұрын
Engine guards from Harley. Mirrors I got for longbeach cycle swap meet
@SkotHenderson5 ай бұрын
Sick build!!! … to each their own, those wheels are badass on that w/ the lights! Definitely not for my bike tho 😁… I’m currently struggling with size and combos on exact wheels! 💯🔥👊🏼
@Nandos_garage5 ай бұрын
Thanks. Wheels was different for sure. Not for everyone but I didn’t want to be like every other gangster build out there. With the paint job and a few things I’ll be adding it’ll all tie up nicely together.
@ThePollo19815 ай бұрын
those wheels are awful.
@salvadorhurtado37045 ай бұрын
Excellent choice on those wheels ! I have very similar ones ! I need an under glow kit tho !
@ianz39155 ай бұрын
Where did you buy the headlamp visor ? Nice ride.
@Nandos_garage5 ай бұрын
You can find them on eBay or Amazon. I got them at a local Harley dealer
@Dean-kg4mx5 ай бұрын
The rear crash bars were you order from ?
@Nandos_garage5 ай бұрын
Harley dealer. But seen them on eBay. Type in the part number in the search bar
@flhcs.5 ай бұрын
Any suspension work? With the extended rear fender you going to keep your pipes at 36 inches?
@Nandos_garage5 ай бұрын
No air ride yet. I’ll eventually due front and rear air ride, I’ve been wanting to get longer tails but most likely after a paint job.
@bargeman1005 ай бұрын
Use stainless steel bolts. They guaranteed will not rust.
@averyblanton3015 ай бұрын
Could you do a short video on how the exhaust crosse's under by the rear tire please. This is the exhaust that I'm wanting to but but mine is a 2012 heritage. Was also wondering about brackets for the exhaust on the left side. Awesome clean build.
@Nandos_garage5 ай бұрын
Yea I can do that. But the suspension for the heritage is in the way. That frame is also further back
@averyblanton3015 ай бұрын
@@Nandos_garage so I would probably have to do the exhaust off the left side then, was trying to keep the heat off of a passenger's foot. Thanks for the reply back though. All the videos I've seen never have explained this about the frames and exhaust pass under.
@Nandos_garage5 ай бұрын
@@averyblanton301yes it’ll go over the primary case and under the passenger peg.
@averyblanton3015 ай бұрын
@@Nandos_garage guess I could put heat wrap on before the regular heat shield to help with the heat. Thanks again. This will be my first cholo build I have 2012 heritage I picked up. Guess I'll have to change out shifter rod also now.
@bigceez70675 ай бұрын
👍🏼 Gracias
@bigceez70675 ай бұрын
Need to know where your shop is at in San Berduu Post the address 👍🏼
@Nandos_garage5 ай бұрын
393 Athol st unit 5 San Bernardino ca 92401
@bigsu97845 ай бұрын
How did u get the foot pods to fit I have the same year and the lowers don’t fit
@user-tv6fh7wg5g6 ай бұрын
Did you do a wind shield delete
@raimee817 ай бұрын
Found this when I googling exhaust options for my new old 2009 GSXR600. In general I love the integrated exhaust design. Really tidies up the look of the bike. It's hard to tell in the video, without the baffle, how much louder is the sound compared to with?
@juanz79089 ай бұрын
I see you got a back rest. Your passenger will appreciate it. Is the seat comfortable?
@joseterrones802010 ай бұрын
The Tbar is 14 inches with a 3-inch pullback. What size did you get the clutch and brake cables as well as all the electronics
@wingwalker787311 ай бұрын
Was cat deleted on this???
@mixxbadd27705 ай бұрын
Yes, you can see the cat on the lift @2:10
@juancano904411 ай бұрын
Did u change or do anything with the brake reservoir?
@user-sb8eh4hg1h11 ай бұрын
how long are the apes?
@rowlinstoned3715 Жыл бұрын
Man this is my bike but slight color difference. I love it
@nathanlamping396 Жыл бұрын
Do you have a extended reach seat or standard reach?
@ronaldgall4978 Жыл бұрын
The blue 2018 in the video is the same bike I have
@therompatriot3839 Жыл бұрын
Can I install these bars on a 2010 using stock cables
@jefferythomas4414 Жыл бұрын
You put music over a video comparing exhaust sounds. At no point that didn't seem stupid to you?
@Nandos_garage Жыл бұрын
If your here to really get a sound check. What’s the difference if the quality isn’t the same as it is in person. Pointless if your here to really judge. Just like my music overlay. It does seem stupid to me.
@DariusMcScotty2 ай бұрын
Couldn’t agree more..ruined
@MoonkingOfficial Жыл бұрын
Is it loud?
@kennethhite8644 Жыл бұрын
How much of a gap do you have between the bar and the fairing?
@dbldbl_anmlstyle895 Жыл бұрын
Super helpful video bro. Thanks.
@huntermorrison4557 Жыл бұрын
Did you use an extension like the fat baggers piece or a new upper clutch line?
@williambogoger8126 Жыл бұрын
Nice looking bike …!! Does it have 21” front 18” rear fat spokes. ?I have the same tank on my softail build..
@davidgou67 Жыл бұрын
Customer should've ordered a matching LED headlight too. Absolutely awesome job, very clear video. Thanks for sharing!
@MrCraigDNelson Жыл бұрын
How do I adjust the light up down/ left right on a 2021 Softail Slim after I put the light in, Thanks
Пікірлер
Those floor boards are sick. Whole thing looks good 🤙
Samson or bassani
🔥🔥🔥👏👏👏
Pinche Nando es CHINGON!!!! 💪🏼💪🏼
@@bigceez7067 Thank you brother!!!
Did you have to tune it?????
Yes tuning is always recommended when dealing with big air and fuel changed. In this case it’ll mess with both and compression.
Get a different motorcycle,Harley’s 👎🏾
Great video I did the same upgrade everything went smoothly but my headlight is dim and bright won’t work at all been struggling with the trouble shooting.
Good job! Sounds snappy
Time for a rear tire
Already replaced right after the video lol.
Will I have to extend the clutch cable on a 23 street glide if I go with 12 inch apes ?
Yes. But there’s a clutch extension kit for it. Ez clutch extension. You can find it on our website. www.nandosgarage.com
You want louder pipes in 1954 there was a set of pipes called Chattanooga piper alot of Hot Rod 54 And 57 had them . First set I seen in 25 years was on Matts Channel . HIS Dad started that Antique Bike Shop in North Carolina . When I remember the Name I willget it to you . But it was on the Hot Rod PanHead it should pop up . Wheels threw Time annd yes its Comesright up
Oh nice. I’ll look for it. I’ve seen his channel. Super cool place with all the bike history. Recommended to check out Barber Motorsports museum in Alabama.
Timeserts should've been installed all way round fr
Not needed for this case. Judging by what the customer stated. It was safe to assume it was incorrectly torqued since this was already discussed. Apparently the customer was charged a time-sert from previous mechanic that had redone the work many times and no time sert was done. It was shady to hear. But 60 days later still tuning like a champ. Brought me another build of his. Maybe the first 136 build in Cali. Who knows. Hope to be the first. Thanks for watching!
Change that air cleaner. It kills performance.
Great video 👍🏻
Awesome work brother. Bike came out fantastic!
How much does something like this cost to get done?
What size length are the slip on’s?
36 inch.
Bro where did you get those turn signal bars at. No one wants to share that info. Crazy nice ride
Those are OEM. They come with 2018-2020 softail deluxe.
Stunning bike
Carnal this is an awesome looking Vicla. Where are the engine guard and rear saddle guards from? Also where did you get the pancake mirrors?
Engine guards from Harley. Mirrors I got for longbeach cycle swap meet
Sick build!!! … to each their own, those wheels are badass on that w/ the lights! Definitely not for my bike tho 😁… I’m currently struggling with size and combos on exact wheels! 💯🔥👊🏼
Thanks. Wheels was different for sure. Not for everyone but I didn’t want to be like every other gangster build out there. With the paint job and a few things I’ll be adding it’ll all tie up nicely together.
those wheels are awful.
Excellent choice on those wheels ! I have very similar ones ! I need an under glow kit tho !
Where did you buy the headlamp visor ? Nice ride.
You can find them on eBay or Amazon. I got them at a local Harley dealer
The rear crash bars were you order from ?
Harley dealer. But seen them on eBay. Type in the part number in the search bar
Any suspension work? With the extended rear fender you going to keep your pipes at 36 inches?
No air ride yet. I’ll eventually due front and rear air ride, I’ve been wanting to get longer tails but most likely after a paint job.
Use stainless steel bolts. They guaranteed will not rust.
Could you do a short video on how the exhaust crosse's under by the rear tire please. This is the exhaust that I'm wanting to but but mine is a 2012 heritage. Was also wondering about brackets for the exhaust on the left side. Awesome clean build.
Yea I can do that. But the suspension for the heritage is in the way. That frame is also further back
@@Nandos_garage so I would probably have to do the exhaust off the left side then, was trying to keep the heat off of a passenger's foot. Thanks for the reply back though. All the videos I've seen never have explained this about the frames and exhaust pass under.
@@averyblanton301yes it’ll go over the primary case and under the passenger peg.
@@Nandos_garage guess I could put heat wrap on before the regular heat shield to help with the heat. Thanks again. This will be my first cholo build I have 2012 heritage I picked up. Guess I'll have to change out shifter rod also now.
👍🏼 Gracias
Need to know where your shop is at in San Berduu Post the address 👍🏼
393 Athol st unit 5 San Bernardino ca 92401
How did u get the foot pods to fit I have the same year and the lowers don’t fit
Did you do a wind shield delete
Found this when I googling exhaust options for my new old 2009 GSXR600. In general I love the integrated exhaust design. Really tidies up the look of the bike. It's hard to tell in the video, without the baffle, how much louder is the sound compared to with?
I see you got a back rest. Your passenger will appreciate it. Is the seat comfortable?
The Tbar is 14 inches with a 3-inch pullback. What size did you get the clutch and brake cables as well as all the electronics
Was cat deleted on this???
Yes, you can see the cat on the lift @2:10
Did u change or do anything with the brake reservoir?
how long are the apes?
Man this is my bike but slight color difference. I love it
Do you have a extended reach seat or standard reach?
The blue 2018 in the video is the same bike I have
Can I install these bars on a 2010 using stock cables
You put music over a video comparing exhaust sounds. At no point that didn't seem stupid to you?
If your here to really get a sound check. What’s the difference if the quality isn’t the same as it is in person. Pointless if your here to really judge. Just like my music overlay. It does seem stupid to me.
Couldn’t agree more..ruined
Is it loud?
How much of a gap do you have between the bar and the fairing?
Super helpful video bro. Thanks.
Did you use an extension like the fat baggers piece or a new upper clutch line?
Nice looking bike …!! Does it have 21” front 18” rear fat spokes. ?I have the same tank on my softail build..
Customer should've ordered a matching LED headlight too. Absolutely awesome job, very clear video. Thanks for sharing!
How do I adjust the light up down/ left right on a 2021 Softail Slim after I put the light in, Thanks