Welcome to Tenza Motorsports KZread channel! We hope you enjoy all the content we create. Don't forget to Subscribe and hit the like button. Also share with all your car enthusiast friends!
We are open to car related promotions/sponsorships.
We are actively looking for these sponsorships:
-BMW parts
-Oil and fuilds
-Tires (performance)
-Video and Audio equipment
-Racing safety equipment
-Welder and accessories
This channel does contain affiliate links. Please help support the content you see by using links provided, shop our merchandise, and consider joining our Patreon!
Пікірлер
Do you have the M knuckles? Or does this all bolt to the stock non M front knuckle?
I a needing to extend my remote since I have to be at the bottom of my ramp to guide PA subs and Amp racks. Is there a wireless hack or has someone extended the wire and have tricks? Thanks.
Those are very handy for soldering.
Test inconclusive the rule is ck oil before starting jus saying
Great video by the way!
I just got a 323ci stick and I really like it it’s very clean and tan leather interior which I don’t see too often. A reason why I kinda want to upgrade the engine and slowly built a M3 it just looks like a journey and I’m not sure I’m ready for it. I do just wish my car had more power any suggestions to start with? I was thinking an intake kit but they can be expensive.
I have a 1999 328i 5speed how hard would it be to swap to a 330 would I need new harnesses? Or can I use the ones it has
Do you remember which dash kit you used to go from the din and a half to the single din?
I change my oil every 3.000 miles, and the cost of royal purple isn't worth it to me,I use Valvoline high milage max life ,using it since vehicle was brand new, 01 Ford Excursion V10, 285.000 miles.
Have u ever tried shafffers supreme?
Take a shot every time he’s says orange peel 🍊 🥃 🤪🤪🤪🤪
It's a great oil with probably the best add package you can buy.
Hey i have a question so I have a 2005 bmw 330i and I want to install a vf supercharger kit but I want to install a m50 intake manifold for better air flow but will i have to do some modifications on the car to fit the kit and what will I need to upgrade after I install the kit so the car can function good
As far as I know, no the m50 intake will put everything roughly back into the position it was before. If anything were to change a couple extra charge piping couplers would be enough to make up for any changes. Until I get it on the car I can’t really say for sure.
Just received mine and installed it today. Looks a bit different on the back from this model, the included brackets don't line up and the screen isn't as clear. Still - It should be fine for my needs in this car -
Must be a slightly different model. The brackets were the only things on our our kit that was a little bit more difficult to install, had to muscle them into position.
I got a 01 bmw 330i i been thinking about supercharging it but i don’t know what kind to get? What would you recommend
If you can find this stage two kit that I have, it’s what I would do again. Seems like a lot of companies who used to produce them have backed off or stopped making kits.
@@TenzaMotorsports okay thank you
doesn't it throw a code for the o2 sensors?
Our car has been running a little bit rough recently due to some other sensor issues so we have not gotten an O2 sensor code. But Yes, normally you would see a check engine light for the O2 sensors. We are going to be getting the post cat sensor deleted when we find a tuner
Are those red bride seats reclinable? And do they come with rails? How is the height of the seats in relation to steering?
The red seats do not recline, and neither seat comes with rails. You have to buy them all separately. As for the distance between the seat and the steering wheel, it’s kinda hard to say, cause everybody’s gonna want them slightly different. My steering wheel has a flat bottom so it’s going to be even more different.
are husky jacks maufactured in US?
For the record, on that Reddit thread that I’m assuming spawned this video, your two cars are the only two I find acceptable to have M stripes 😎
Well sucks that in my country, there is no legal way to go catless on the headers :p
Sorry to hear you don’t live a place that respects freedom. Should be able to get some performance one and not violate the laws that violate your freedoms
@@TenzaMotorsports Yea that is my ongoing plan to buy a custom made 200 cell cat high performance header. The drawback is the price. 6000€ 😂 The only way to get it to work with a licence in germany lol. Due to that price its actually my least prioritized part to plan though.
Love the Porsche content
Where did you get the pink front bash bar piece
Waaaw that's really helpful I do mine this weekend
I use stp most of the time should I start using rp.
If parking and neuutral does not appear on the speedometer but appears on the gear line lever, the csr do not start only starts when parking reflects on speedometer
Big up all e46 man dems
I use spray paint but first sand it down then use an etch primer then paint and clear coat.
Interesting, was just looking at one of these MAFs for tuning an E36 obd2 Turbo setup. Much cheaper than a Porsche MAF and a nice resolution for the maps. It's a shame you aren't able to talk about the tuning.
A friend who built engines for short-track racing and also raced his own car, ran several different oils in his own motor until he found the one that showed the least wear on components, rod & main bearings, lifters & cam, and pistons/cylinder walls. This was before the current synthetics.
Very nice upgrade!
LMAO, she's got you beat in style man!
Love the leopard print on the back. Did you do that free hand or was that a kit?
They are all done by hand. Each individual piece. Custom cut by myself!
Hi, I currently have 25 bmw from the Golden aear of the erly 2000's. I have 10 e46's 6 of then are the zhp modle. 7 e39 540i's. 4 e53's 2 e38's. 2 e92 335i. 1 e32 740i. I love the way bmw makes you feel behind the wheel. I got my first bmw back in 2006 and have loved them ever sense and have alway done all of the work and maintenance on them myself. I appreciate watching your videos keep it up. Thank you.
You’re so lucky! Sounds like you have an amazing collection. Gold age is right. They have aged like high end wine and they are so easy to work on. Let me know first if you’re ever going to sell anything! lol thanks for the comment
haha i saw you and your homies the other day and gawd dam your car is so nice, beautiful sound, perfect look and amazing build #loudblueram
How long did this hold up? Im thinking of doing this to my E46 but was gonna use 3m gloss black
Skip roughly 75% of this crap video to get to the actual video. You’re welcome.
If you skip 75 % the information “crap” you’ll end up asking dumb questions that I already answered. These video are plagued with people who skip around and then don’t understand what they are watching. Then ask me to clarify in the comments even though it’s already been gone over.
Did not work..
What didn’t work?
Will this auto read the vin on the e46 m3 and is it able to do a vanos test? Most scanners will not do the vanos test.
I’m not sure. Haven’t had to do one of those yet.
It can read Vin info on newer cars, For most of old cars, Car makes have not entry Vin info in ECU. vanos test>>> You want to ask bidirectional test?
I have a 320i I thought about turning into a track car. Any pointers or parts I should get to get started I literally know nothing about making one of these a race car! How much should I budget to have something competitive?
I ordered mine the other day. Waiting for it to come in. 98 540i 6 speed.
Thanks for this ..I'm installing this on my z4 m54b30. Question, did you change the bypass valve? Is the VF one ok? I know your other 330i is around 400whp. How's it running? Love the channel
Nice video. Cool car.
Thanks so much for watching! Get 15% off your order using code " TM15 " after using the link below. bit.ly/4bTUtUx
did you have any trouble putting the rubbers on the flares? did you have to glue the rubber?
It was a little rough. Best way is to leave the rubber in the sun to warm up. Straighten them out. Then put them on the flares in the sun and sit a little more.
@@TenzaMotorsports just finished installing mine didn't fit real well but they were only 90bucks
Looks to be a good product.
It doesnt prove anything about the oil, most of the oil is spun off immediately and what residue is left is baked on. It shows me that the cheap engines have a big difference of tolerances. Also another senario is the amsoil retained better, baked in a thicker layer, hince the brown look. This test is not how engine oil was designed to be used. Time and time again in tests amsoil wins against all the other brands.
Did you have to cut the diffuser in order to put the new one on? Or is there another method. And do you have a link for the diffuser
There isn’t an actual diffuser that I put on. I just installed the vortex generators on the bottom of the bumper .
@@TenzaMotorsports oh so it was painted?
Yes. We did some plasti dip on it. Sorry. Should have mentioned that. It’s a cheap reversible way to change things up
Great video!! Were you able to retain the factory touring subwoofer? Mine doesn’t seem to work with the eonon unit
The speakers in this car are a mess. Missing, blown, old, torn, garbage. I honestly don’t know about that question. That’s something that needs attention and will eventually get a video on the channel.
@@TenzaMotorsports I’m sure you’ve considered bavsound, excited to see what you come up with!
how are your temps with this piece?
Not sure yet, pressure and temp sensors are on the list of things to buy.
Thanks for watching! interested in your own auxito products? Get 15% off your AUXITO order! Use code "TENZA" www.auxito.com/?ref=g38jx73z7j