Did you listen to this b4 you posted? Volume is extremely low. Can't hear. Thanks!
@HOSPEHLOSHEPH2 ай бұрын
This is the worst thermostat ever invented
@the1atcpc5 ай бұрын
Thank you!
@ehudgavron90866 ай бұрын
Man, I was going to rip that thing off the wall!! Thank you so much!! Middle of the top... above where I could see... oh thank you :)
@chrissypiec14277 ай бұрын
How to remove temp settings?
@charlesthompson36158 ай бұрын
Along with others, thank you. The manual is totally worthless; instruction said to move the entire plate with a process that didn't work. Your video and instructions saved me a lot of time. Again, thank you.
@Jason-wc3fh10 ай бұрын
Had a YSC120 like this recently. It had the older style fan speed control that was a rheostat. The unit was 600v. Anyways, the blower stopped working. Found out the transformers it uses to drop the voltage from 600 to 460 were blown. So we replaced those, still didn't work. Then we found out the rheostat for the blower speed was fried, so we tried to order that, but it had been superseded by two kits. One being the fancy little digital controller called the ECM, and the other kit being the electrical harness adapter, little backer plate, zip ties, and couple of screws... I'd say the harness kit probably consisted of about $20 of parts. Wel,l that harness kit was actually $1,600 without tax from Trane. Needless to say, this blower fix (without actually ever touching the blower itself or its ecm module behind the motor) totalled over $5000 for the customer. So for anyone interested in a unit with this technology, stay far FAR away.
@RobbieBobbie98 Жыл бұрын
I want my fan to shut off when the desired temperature is achieved. I’m using the blower fan to circulate heat from my wood stove throughout the house but it won’t shut off unless I manually turn it off
@RobbieBobbie98 Жыл бұрын
I wish I could turn my fan to automatic without using gas. I have a wood stove that I’d like to circulate the heat using the blower fan. I can do that with the furnace off and the fan on but it won’t automatically shut off at the desired temperature
@michaelshaw3263 Жыл бұрын
Why do you not explain how to replace the lithium battery cr 2032? There is a panel there that seems impossible to open. The thermostat tells me in needs replacing.
@claireduffrin9135 Жыл бұрын
I needed this! thank you!
@manon5822 Жыл бұрын
Why emer heat does not appear on the screen? Thank you for this video
@kimpoulin-pomerleau5991 Жыл бұрын
Hi, did you found the answer? I have the same problem. Thanks
@manon5822 Жыл бұрын
@@kimpoulin-pomerleau5991 j'ai téléphoné chez Honeywell ils m'ont dit quoi faire ils ont un excellent service
@kimpoulin-pomerleau5991 Жыл бұрын
@@manon5822 super merci! vous souvenez-vous de la séquence à faire?
@Yyrdfhjlplnvxsserujbg7 Жыл бұрын
Do you have videos on how to clean the coil?
@pncwho Жыл бұрын
So, HOW DO YOU REPLACE THE BATTERIES?! I already knew how to remove it from the base!
@gingerlawrence4677 Жыл бұрын
Thank you, you helped me!
@MethuselahMusic2 жыл бұрын
Anyone here looking for useful info on your Trane unit, don't waste your time. Trane is one of those companies that caters to professionals by intentionally keeping end-users in the dark. Even the user manual is a joke, 2 pages of boilerplate non-information - just enough to make you worry and call out a technician. There website states "Generally speaking, it's best practice to get your air conditioner serviced by a professional twice a year, once in the spring and once in the fall, to have them diagnose and handle repairs." LMAO. I've been in my place for 6 years and aside from changing my filter and cleaning my condenser coils, which I do myself, have NEVER required service. With regard to some of the questions here, many units (like my XL14C) will have the filter in the duct, not in the unit. It is good practice to check this area shown in the video, as for example, a part of my filter separated from the duct and got sucked into the condenser, completely blocking it. I just discovered this today, as I was researching and found this video. Aside from the more advanced electrical and gas charging, these units are not complicated. A little investigating goes a long way. Short answer is, SHUT THE POWER OFF and have a look for yourself. Don't go further than your ability/confidence level, and take pics as you take things apart. Chances are, the issue will be obvious. If not, THEN call a tech. Just my $.02. Good luck!
@sherlenelocklear11272 жыл бұрын
Honey we’ll heat pump thermostat
@JonnyTuneIn2 жыл бұрын
*This was perfect for my greenhouse! **Fastly.Cool** and Warming environment perfectly controlled I love how it keeps track of the temperature so you are able to go back and check how it fluctuates through the night/day*
@corygrinder67422 жыл бұрын
OMG. When did Tom Hanks start doing hvac
@damianstasek8946 Жыл бұрын
Lmao
@HsingSun2 жыл бұрын
Thank you for your video. How to do System Test?
@HsingSun2 жыл бұрын
Thank you for the video. How did you set "Auto" mode at the System Setting?
@joannaquanttumphysics2 жыл бұрын
Why aren’t you answering these peoples questions????
@brownieegan91952 жыл бұрын
Thanks, u saved the day!
@davidkisselbaugh92822 жыл бұрын
YOU ONLY SHOWED HOW TO TAKE THERMOSTAT OFF THE WALL. YOU DIDNT SHOW HOW TO REMOVE BATTERIES FROM THE THERMOSTAT
@afvro752 жыл бұрын
How do I delete the schedule? I understand I can override it with the “hold” button but the schedule would still be there if I click the “run” button. So if I don’t want any schedule at all how do I delete it for good? Thanks.
@MJs-852 жыл бұрын
Can I permanently shut the fan off
@Stall-FedCalves2 жыл бұрын
No, it doesn't set it back to autmatic; that's why I'm here. Not helpful.
@Toxnsud2 жыл бұрын
Thank you!
@peejayneidig25653 жыл бұрын
How do you change from Fahrenheit to celsius
@rotaryenginepete2 жыл бұрын
For the TH5220D, the Temperature display can be changed to Celsius. Press and hold the UP and FAN buttons simultaneously until the screen shows Function number 1. Press NEXT until the Function number displayed is 14. Setting 0 is Fahrenheit and setting 1 is Celsius, so press UP until the Setting number is 1 and then press DONE.
@siskse3 жыл бұрын
I have several VisionPro 8000 thermostats and some are showing the CR2032 battery needs replacing. When I replace it, I get a message to replace the cell battery and the red light at the bottom comes on. It seems to me it doesn't like the new battery. If you can help, I would appreciate.
@brownxeyez Жыл бұрын
Did you happen to figure this out? I'm experiencing this right now.
@siskse Жыл бұрын
@@brownxeyez sorry, no
@kimjongun9555 Жыл бұрын
Did you replace 4AA batteries or round small battery?
@marykitchen52093 жыл бұрын
I wish I had the 1960 dial thermostat back ,the dont make brains like the used to
@leova125873 жыл бұрын
*I have been converting my home to a smart home **do7.pl/honeywell1** I purchased this thermostat from Amazon, got it installed pretty easily, but it was reading the current temperature 3 degrees higher than my old thermostat, and would not allow me to set the heat above 75.9 degrees F. I searched for an answer on the web, didn't find it. I noticed others said that theirs were not reading the correct temperature, though.I called tech support, number from honeywell's website, and it took only six minutes to correct the problem. There is a setting which allows you to set the max allowable temperature, as well as to set an offset for the display temp. Either one, or both, will solve the problem.Settings>Preferences>Advanced Preferences> you will find them both there, just keep following the prompts.Good Luck.*
@capricorns1st3 жыл бұрын
I’m so annoyed bc I don’t think you can turn the fan off.
@lenoradoerfler97453 жыл бұрын
I hope you realize how helpful people like you are. As my husband and I age I am left to my own abilities to figure out how to fix, replace, and meet challenges. With you taking the time to record this I was able to simply take a few minutes to take care of replacing batteries without calling my daughter or son. Thank you, kind person!
@loralkinney3 жыл бұрын
My doesn't show "set day/schedule" even though I have auto enabled....how can I get it to show set day/schedule??
@BradBurkhartProFishing4 жыл бұрын
I have this same unit. Mine doesn’t have a filter in front of the coil. Should it??
@greyglassL9225 күн бұрын
Just ran into the same problem, did you find out an answer or are you still rockin no filter?
@vprugby8434 жыл бұрын
This thermostat is the worst. It does not read the correct indoor temp so my AC runs allllll day. Any suggestions?
@rotaryenginepete2 жыл бұрын
Find the installation manual because this thermostat can be configured to run several different types of systems like air conditioners, gas heaters, or heat pumps. It probably needs the proper wiring and installation setup performed.
@HsingSun2 жыл бұрын
Be aware your electric bill!
@fardosasomething41704 жыл бұрын
My up and down buttons on the thermostat won't work, like it won't put the temperature up or down. You used to have to push it really hard to make it work but now it just doesn't. How do I fix that?
@odaydrums4 жыл бұрын
"and it will hold until someone presses the run scheduled button" Well mine has a mind of its own evidently. I had my door open for ventilation and the little sucker went back to some schedule where the temp is set for 65 degrees. It seems to love 65 for some reason. It needs to be killed and I will do that as soon as I get a simple up and down one.
@dottiejoy84233 жыл бұрын
I tried the fan button and up arrow to cancel schedule, that I learned on another video, and now it's stuck on heat. No matter what numbers I've tried, holding fan and up arrow button, it still stays on heat. HELP!
@odaydrums3 жыл бұрын
@@dottiejoy8423 I just put in a manual one screw the programming!
@Bmphotog4 жыл бұрын
Great. Where's the enthalpy sensor? Where is it factoring outdoor air temp/humidity?
@georgea07314 жыл бұрын
I have 2 of these, one has AUTO, the other doesn't, why? Thanks for the video.
@SisterBaby4 жыл бұрын
Thank you for posting this!! You saved me so much time.
@HVACRDUDE5 жыл бұрын
Nice!
@wholeNwon5 жыл бұрын
The MOST important thing to know is that, after battery replacement, it may take up to 8 minutes for the INITIAL cooling startup. The fan relay button should work right away.
@julieusinger18153 жыл бұрын
I did all this and have a blank screen....
@larrygrasso60325 жыл бұрын
I listened to 10 different videos on this subject you explained it the best !!! tyty
@gokeraji87315 жыл бұрын
I couldn't get to turn off my fan.
@salgalvan65885 жыл бұрын
I Can't figure it out either. Any help?
@SombraLocs5 жыл бұрын
Great video! Are you still making videos?
@NoMaD175 жыл бұрын
But, how do you turn the fan off?
@MJs-852 жыл бұрын
Wana know the same thing
@robotech9876543212 жыл бұрын
Me too!
@ItsInova6 жыл бұрын
*Great display, very visible, fairly intuitive>>>**t.co/AQGT74Oith** My friend had recommended this since he had installed one in his own house, and now he likes mine even better and wants to upgrade his. Love the display of outside temperature and humidity, and that you can set it so that it will automatically heat and/or cool as the house requires (a good thing in my climate-variable area*
@oneawayfromnone36696 жыл бұрын
Is there really no way to just NOT have a schedule activated?
@ghacinc19686 жыл бұрын
Raleigh Jones Unfortunately, the Honeywell 6000 series does not have the option to disable the schedule.
@odaydrums4 жыл бұрын
@@ghacinc1968 And the question on everyone's pissed off lips on KZread is WHY?
Пікірлер
Did you listen to this b4 you posted? Volume is extremely low. Can't hear. Thanks!
This is the worst thermostat ever invented
Thank you!
Man, I was going to rip that thing off the wall!! Thank you so much!! Middle of the top... above where I could see... oh thank you :)
How to remove temp settings?
Along with others, thank you. The manual is totally worthless; instruction said to move the entire plate with a process that didn't work. Your video and instructions saved me a lot of time. Again, thank you.
Had a YSC120 like this recently. It had the older style fan speed control that was a rheostat. The unit was 600v. Anyways, the blower stopped working. Found out the transformers it uses to drop the voltage from 600 to 460 were blown. So we replaced those, still didn't work. Then we found out the rheostat for the blower speed was fried, so we tried to order that, but it had been superseded by two kits. One being the fancy little digital controller called the ECM, and the other kit being the electrical harness adapter, little backer plate, zip ties, and couple of screws... I'd say the harness kit probably consisted of about $20 of parts. Wel,l that harness kit was actually $1,600 without tax from Trane. Needless to say, this blower fix (without actually ever touching the blower itself or its ecm module behind the motor) totalled over $5000 for the customer. So for anyone interested in a unit with this technology, stay far FAR away.
I want my fan to shut off when the desired temperature is achieved. I’m using the blower fan to circulate heat from my wood stove throughout the house but it won’t shut off unless I manually turn it off
I wish I could turn my fan to automatic without using gas. I have a wood stove that I’d like to circulate the heat using the blower fan. I can do that with the furnace off and the fan on but it won’t automatically shut off at the desired temperature
Why do you not explain how to replace the lithium battery cr 2032? There is a panel there that seems impossible to open. The thermostat tells me in needs replacing.
I needed this! thank you!
Why emer heat does not appear on the screen? Thank you for this video
Hi, did you found the answer? I have the same problem. Thanks
@@kimpoulin-pomerleau5991 j'ai téléphoné chez Honeywell ils m'ont dit quoi faire ils ont un excellent service
@@manon5822 super merci! vous souvenez-vous de la séquence à faire?
Do you have videos on how to clean the coil?
So, HOW DO YOU REPLACE THE BATTERIES?! I already knew how to remove it from the base!
Thank you, you helped me!
Anyone here looking for useful info on your Trane unit, don't waste your time. Trane is one of those companies that caters to professionals by intentionally keeping end-users in the dark. Even the user manual is a joke, 2 pages of boilerplate non-information - just enough to make you worry and call out a technician. There website states "Generally speaking, it's best practice to get your air conditioner serviced by a professional twice a year, once in the spring and once in the fall, to have them diagnose and handle repairs." LMAO. I've been in my place for 6 years and aside from changing my filter and cleaning my condenser coils, which I do myself, have NEVER required service. With regard to some of the questions here, many units (like my XL14C) will have the filter in the duct, not in the unit. It is good practice to check this area shown in the video, as for example, a part of my filter separated from the duct and got sucked into the condenser, completely blocking it. I just discovered this today, as I was researching and found this video. Aside from the more advanced electrical and gas charging, these units are not complicated. A little investigating goes a long way. Short answer is, SHUT THE POWER OFF and have a look for yourself. Don't go further than your ability/confidence level, and take pics as you take things apart. Chances are, the issue will be obvious. If not, THEN call a tech. Just my $.02. Good luck!
Honey we’ll heat pump thermostat
*This was perfect for my greenhouse! **Fastly.Cool** and Warming environment perfectly controlled I love how it keeps track of the temperature so you are able to go back and check how it fluctuates through the night/day*
OMG. When did Tom Hanks start doing hvac
Lmao
Thank you for your video. How to do System Test?
Thank you for the video. How did you set "Auto" mode at the System Setting?
Why aren’t you answering these peoples questions????
Thanks, u saved the day!
YOU ONLY SHOWED HOW TO TAKE THERMOSTAT OFF THE WALL. YOU DIDNT SHOW HOW TO REMOVE BATTERIES FROM THE THERMOSTAT
How do I delete the schedule? I understand I can override it with the “hold” button but the schedule would still be there if I click the “run” button. So if I don’t want any schedule at all how do I delete it for good? Thanks.
Can I permanently shut the fan off
No, it doesn't set it back to autmatic; that's why I'm here. Not helpful.
Thank you!
How do you change from Fahrenheit to celsius
For the TH5220D, the Temperature display can be changed to Celsius. Press and hold the UP and FAN buttons simultaneously until the screen shows Function number 1. Press NEXT until the Function number displayed is 14. Setting 0 is Fahrenheit and setting 1 is Celsius, so press UP until the Setting number is 1 and then press DONE.
I have several VisionPro 8000 thermostats and some are showing the CR2032 battery needs replacing. When I replace it, I get a message to replace the cell battery and the red light at the bottom comes on. It seems to me it doesn't like the new battery. If you can help, I would appreciate.
Did you happen to figure this out? I'm experiencing this right now.
@@brownxeyez sorry, no
Did you replace 4AA batteries or round small battery?
I wish I had the 1960 dial thermostat back ,the dont make brains like the used to
*I have been converting my home to a smart home **do7.pl/honeywell1** I purchased this thermostat from Amazon, got it installed pretty easily, but it was reading the current temperature 3 degrees higher than my old thermostat, and would not allow me to set the heat above 75.9 degrees F. I searched for an answer on the web, didn't find it. I noticed others said that theirs were not reading the correct temperature, though.I called tech support, number from honeywell's website, and it took only six minutes to correct the problem. There is a setting which allows you to set the max allowable temperature, as well as to set an offset for the display temp. Either one, or both, will solve the problem.Settings>Preferences>Advanced Preferences> you will find them both there, just keep following the prompts.Good Luck.*
I’m so annoyed bc I don’t think you can turn the fan off.
I hope you realize how helpful people like you are. As my husband and I age I am left to my own abilities to figure out how to fix, replace, and meet challenges. With you taking the time to record this I was able to simply take a few minutes to take care of replacing batteries without calling my daughter or son. Thank you, kind person!
My doesn't show "set day/schedule" even though I have auto enabled....how can I get it to show set day/schedule??
I have this same unit. Mine doesn’t have a filter in front of the coil. Should it??
Just ran into the same problem, did you find out an answer or are you still rockin no filter?
This thermostat is the worst. It does not read the correct indoor temp so my AC runs allllll day. Any suggestions?
Find the installation manual because this thermostat can be configured to run several different types of systems like air conditioners, gas heaters, or heat pumps. It probably needs the proper wiring and installation setup performed.
Be aware your electric bill!
My up and down buttons on the thermostat won't work, like it won't put the temperature up or down. You used to have to push it really hard to make it work but now it just doesn't. How do I fix that?
"and it will hold until someone presses the run scheduled button" Well mine has a mind of its own evidently. I had my door open for ventilation and the little sucker went back to some schedule where the temp is set for 65 degrees. It seems to love 65 for some reason. It needs to be killed and I will do that as soon as I get a simple up and down one.
I tried the fan button and up arrow to cancel schedule, that I learned on another video, and now it's stuck on heat. No matter what numbers I've tried, holding fan and up arrow button, it still stays on heat. HELP!
@@dottiejoy8423 I just put in a manual one screw the programming!
Great. Where's the enthalpy sensor? Where is it factoring outdoor air temp/humidity?
I have 2 of these, one has AUTO, the other doesn't, why? Thanks for the video.
Thank you for posting this!! You saved me so much time.
Nice!
The MOST important thing to know is that, after battery replacement, it may take up to 8 minutes for the INITIAL cooling startup. The fan relay button should work right away.
I did all this and have a blank screen....
I listened to 10 different videos on this subject you explained it the best !!! tyty
I couldn't get to turn off my fan.
I Can't figure it out either. Any help?
Great video! Are you still making videos?
But, how do you turn the fan off?
Wana know the same thing
Me too!
*Great display, very visible, fairly intuitive>>>**t.co/AQGT74Oith** My friend had recommended this since he had installed one in his own house, and now he likes mine even better and wants to upgrade his. Love the display of outside temperature and humidity, and that you can set it so that it will automatically heat and/or cool as the house requires (a good thing in my climate-variable area*
Is there really no way to just NOT have a schedule activated?
Raleigh Jones Unfortunately, the Honeywell 6000 series does not have the option to disable the schedule.
@@ghacinc1968 And the question on everyone's pissed off lips on KZread is WHY?