Thanks. I just put the manifold back on after a head gasket replacement, and forgot new donuts (oops!). Big exhaust leak. Good to know I can hopefully get them in there without pulling the manifold again.
@zacharynewcomb85083 жыл бұрын
So I’m wonder how to get the oil pressure gauge connected. As the previous owner put in an aftermarket oil pressure gauge I would like it in my gauge cluster. I did a cluster swap already all my gauges work properly minus the oil pressure gauge.
@jorgearias52124 жыл бұрын
I do the same thing, but when I use the blinkers, my speedometer needle drop, why?
@velocity22s4 жыл бұрын
I had the same issue with my previous Toyota so what I did was I removed the cluster and cleaned all the solder connections on the back and it fixed it. Though I've heard that it's a "bad cluster" but I would try cleaning it up a bit.
@jorgearias52124 жыл бұрын
@@velocity22s thanks, I will try and see what happens!
@vidalaguilera76034 жыл бұрын
What steering wheel do you have on this truck? @Tooslow_srt
@velocity22s4 жыл бұрын
The steering wheel is GT but the quick release is basic unbranded Amazon product.
@tylerdouglas55844 жыл бұрын
I cant get money to line up at all and its irritating
@diegotovar93914 жыл бұрын
Hey tooslow, i have an 89 toyota pickup 4x4 that the speedometer went out about a yr ago and i finally found me a local instrument cluster it is out of an 92 toyota pick up also a 4x4 and im wondering if it is going to work and what modifications i am going to have to make/incounter.?? Please help, im not all that good mechanic wise...thank you very much...
@velocity22s4 жыл бұрын
First of all you gotta see if your original cluster had a spedo cable or if it's electronic. To check this out without having to remove it from the dash, look under at the transmission from the passenger side and you'll be able to see a stiff cable that connects to the transmission.
@diegotovar93914 жыл бұрын
It does. I was just worried that half of the gauges were not going to work.
@raulmartinez47135 жыл бұрын
Nice litle pickup truck bro hey tell me what excactly size of tires and wheels you have on bro please👍
@velocity22s5 жыл бұрын
Thanks bro! 15x8 American racing wheels on 215/60/15
@twiztedhilux14366 жыл бұрын
Looks Good!
@Nobody-ks8ui6 жыл бұрын
What kid of shocks are they
@velocity22s6 жыл бұрын
NC FISHING Stock shocks. I did not mess with the shocks though in the future I might need new ones.
@christopherlerma19177 жыл бұрын
What's that john guys last name?I did not know this was possible, definitely going to look into this!
@velocity22s7 жыл бұрын
christopher lerma...John Wilder, if I'm not mistaken. He has a KZread channel named Garage built Hondas. I've swapped several messages with him about mods on Toyotas. Check him out.
@gerardoihm7 жыл бұрын
What is the width and offset on your rims? Looks really good
@velocity22s7 жыл бұрын
GZero 8" width. zero offset
@mosthated81907 жыл бұрын
Are your struts good ? Or did you swap them when you installed the eibach ? What do you think about the sport line eibach with 22" viper reps ? You think I'll need to roll my fenders ?
@velocity22s7 жыл бұрын
Alex Tovar struts are good. I did not swap anything. only mods I did were roll fenders and notch down the upper ball joint bolt. If you go with sportline you will need to roll fenders with 22's. when you make a full turn left or right...for example u turn..the tires will rub in the inside fenders.
@mosthated81907 жыл бұрын
Tooslow_srt what exactly do you mean notch down the ball joint bolt ? Cause I had mine shaved down a little when I got my 22's
@velocity22s7 жыл бұрын
Alex Tovar shaved down? the bolt? bolt that's over the front tires. Upper control arm
@mosthated81907 жыл бұрын
Yeah that bolt thats right above the front tires
@velocity22s7 жыл бұрын
Alex Tovar well if you have that one shaved down already then you're good to go. All you will need to do is roll your fenders. Believe me you should get it done, you drive more comfortable with peace in mind knowing your tires are not being chewed up by the fenders. I learned the hard way that's why I ended up rolling them.
@josesotelo78677 жыл бұрын
what tire size do you have on it? I like the way way it looks 👌
@velocity22s7 жыл бұрын
jose sotelo 215 60 15. I did a lot of research to get the perfect tire to fill in fenders.
@josesotelo78677 жыл бұрын
Nice i have a set of 15 and i was thinking on using 225-60-15 but i like how your truck wheels and tires looks like. Thanks!
@velocity22s7 жыл бұрын
jose sotelo I wouldn't go with the 225. they will stick out quite a bit and they will rub when making a tight turns. 215 sit perfect along fender line . I'm currently debating in switching the fronts to 205
@blanco00147 жыл бұрын
Its beautiful Dude!
@velocity22s7 жыл бұрын
JOHNNY WHITE Thanks bro!
@DominiqueVandelay7 жыл бұрын
nice! looking to start lowering my 89 dakota this weekend how many inches down did the torsion bar crank take you?
@velocity22s7 жыл бұрын
Art Vandelay from factory I brought the bolt 2" down which pretty much was equivalent to the rear which was a 3" drop. I did trim front bump stops which brought it down a little lower (since it was sitting on bumps). I Had to readjust and play with torsion bar until I got it where I wanted it.
@DominiqueVandelay7 жыл бұрын
Tooslow_srt nice! thanks for the info
@GarageBuiltHondas7 жыл бұрын
I got my new wheels on my truck man, check out my latest video, let me know what you think!
@m.sanchez80487 жыл бұрын
Sexy💋
@m.sanchez80487 жыл бұрын
😘
@GarageBuiltHondas7 жыл бұрын
Dude looks great!! That fitment is perfect for a daily! What did you do for the front drop, torsion crank and ball joint flip? Thanks for the shoutout man, that was super cool of you!!
@velocity22s7 жыл бұрын
Jon Widmer Yes, torsion crank. I did not do ball joint flip bc I got it right where I wanted it. I just trimmed the bump stops almost about an inch. Truck is really low that it's sitting on the the bump stops. Don't know if that will be a problem? for now I will ride like that and maybe in the future raise it half an inch. Yeah had to give you credit for helping out. my bad couldn't really remember your last name.
@GarageBuiltHondas7 жыл бұрын
Tooslow_srt You could do the ball joint flip and re-do the torsion bar setup and that will give you some clearance between the bump stop. The ball joint flip alone gives about an inch drop. I did this on my truck and the drop was an extra inch, the spindles lowered or 2", and the extra 1" with the BJ flip.
@dannyrodriguez6457 жыл бұрын
what modle is that with the sunroof
@kevinx18298 жыл бұрын
Did you bolt or just used the 3m tape on your spoiler?
@miguelbravo181510 жыл бұрын
How low are you on those 24's? I'm practically tucking my 22's and making the move to 24's but I don't want to lift it at all!!!
@bigballajet11 жыл бұрын
one question bro. whats the width and offset of that rim? Im getting my 24s next week. is that 24 x 9? 9.5? or 10? and what offset? I want it to tuck like yours do. Thanks bro.
@mateuszhoder188511 жыл бұрын
These wheels are 5x114, 3, 300c originally a 5x115, you have some problem with the
@JoSeDbZcOoL11 жыл бұрын
Hey bro I just ordered these rims and I have a 300c am I gonna need spacers for the front? Mine is not lowered
@503TD11 жыл бұрын
or you can jus roll ur fenders like i did no rubbing at all
@velocity22s12 жыл бұрын
sportline.
@velocity22s12 жыл бұрын
eibach
@velocity22s12 жыл бұрын
24 inch d1 made by 2crave on fullway 275/25/24
@velocity22s12 жыл бұрын
they'll rub ony on reverse while turning ur wheels. but if u put in 24s without lowering u get no rubbing.
@velocity22s12 жыл бұрын
sportline. it works just fine. u just need to get ur fenders rolled in or u will have nasty rubbing.
@velocity22s12 жыл бұрын
yeah you have to get the top inner bolt thats inside fender of the front arms notch down. where ever you get ur rims installed should know about it!
@moparman201012 жыл бұрын
do they rub in the front at all ?
@bigballajet12 жыл бұрын
hey bro.. which eibach springs did you use? pro kit or sportline? I have sportline at the moment on 22s. thinking about going 24s but not sure if it will work on my sportline drop kit. I also have a 300. Thanks
@nicknvick073112 жыл бұрын
ay did u have to do any adjusting to make ur 24s fit???
@velocity22s12 жыл бұрын
around 9k invested. inside out
@velocity22s12 жыл бұрын
eibach lowering springs. you can also go with spring tech to save some cash. a lot cheaper and same quality.
@velocity22s12 жыл бұрын
thanks dawg...its all about giving it the right touch. not to much just to make it look clean!
@shanemcneilmusic12 жыл бұрын
what springs did you use?
@velocity22s12 жыл бұрын
@soxsucks yeah looks clean. handle and when its done post up some pics or vids to scope it out.
@soxsucks12 жыл бұрын
Ya I was surprised when they told me that it's a shop In Fresno but I think Im going to end up doing it I really like the look
@soxsucks12 жыл бұрын
Ya for everything I was surprised when they told me that lol but I'm going to go ahead and do it I really like the look
@velocity22s12 жыл бұрын
@soxsucks 1900 for all? damn thats pretty cheap! well u do have to roll fenders in if ur gonna lower it or else it will rub. but once they get rolled in theres no rubbing at all only on normal rubbing. such as reversing while turning tires. but other than that its pretty smooth riding and no rubbing.
@soxsucks12 жыл бұрын
Really? Did they replace the springs or cut then I went and ask a shop a couple days ago they told me 1900 for those rims,lowering and rolling fenders but said it would be rubbing so I'm not sure yet.
@velocity22s12 жыл бұрын
@soxsucks 2.7 inches all around
@soxsucks12 жыл бұрын
People just like messing with my car lol but I meant how much was it dropped like inches
@velocity22s12 жыл бұрын
@soxsucks why does it have a bad repu? i know the guy that lowered it for me so he charged me $300 parts and labor
@soxsucks12 жыл бұрын
How much was it lowered???
@soxsucks12 жыл бұрын
Thanks for all the help man I really needed to change my car up it has a bad reputation in my town
Пікірлер
Beautiful!
Thanks. I just put the manifold back on after a head gasket replacement, and forgot new donuts (oops!). Big exhaust leak. Good to know I can hopefully get them in there without pulling the manifold again.
So I’m wonder how to get the oil pressure gauge connected. As the previous owner put in an aftermarket oil pressure gauge I would like it in my gauge cluster. I did a cluster swap already all my gauges work properly minus the oil pressure gauge.
I do the same thing, but when I use the blinkers, my speedometer needle drop, why?
I had the same issue with my previous Toyota so what I did was I removed the cluster and cleaned all the solder connections on the back and it fixed it. Though I've heard that it's a "bad cluster" but I would try cleaning it up a bit.
@@velocity22s thanks, I will try and see what happens!
What steering wheel do you have on this truck? @Tooslow_srt
The steering wheel is GT but the quick release is basic unbranded Amazon product.
I cant get money to line up at all and its irritating
Hey tooslow, i have an 89 toyota pickup 4x4 that the speedometer went out about a yr ago and i finally found me a local instrument cluster it is out of an 92 toyota pick up also a 4x4 and im wondering if it is going to work and what modifications i am going to have to make/incounter.?? Please help, im not all that good mechanic wise...thank you very much...
First of all you gotta see if your original cluster had a spedo cable or if it's electronic. To check this out without having to remove it from the dash, look under at the transmission from the passenger side and you'll be able to see a stiff cable that connects to the transmission.
It does. I was just worried that half of the gauges were not going to work.
Nice litle pickup truck bro hey tell me what excactly size of tires and wheels you have on bro please👍
Thanks bro! 15x8 American racing wheels on 215/60/15
Looks Good!
What kid of shocks are they
NC FISHING Stock shocks. I did not mess with the shocks though in the future I might need new ones.
What's that john guys last name?I did not know this was possible, definitely going to look into this!
christopher lerma...John Wilder, if I'm not mistaken. He has a KZread channel named Garage built Hondas. I've swapped several messages with him about mods on Toyotas. Check him out.
What is the width and offset on your rims? Looks really good
GZero 8" width. zero offset
Are your struts good ? Or did you swap them when you installed the eibach ? What do you think about the sport line eibach with 22" viper reps ? You think I'll need to roll my fenders ?
Alex Tovar struts are good. I did not swap anything. only mods I did were roll fenders and notch down the upper ball joint bolt. If you go with sportline you will need to roll fenders with 22's. when you make a full turn left or right...for example u turn..the tires will rub in the inside fenders.
Tooslow_srt what exactly do you mean notch down the ball joint bolt ? Cause I had mine shaved down a little when I got my 22's
Alex Tovar shaved down? the bolt? bolt that's over the front tires. Upper control arm
Yeah that bolt thats right above the front tires
Alex Tovar well if you have that one shaved down already then you're good to go. All you will need to do is roll your fenders. Believe me you should get it done, you drive more comfortable with peace in mind knowing your tires are not being chewed up by the fenders. I learned the hard way that's why I ended up rolling them.
what tire size do you have on it? I like the way way it looks 👌
jose sotelo 215 60 15. I did a lot of research to get the perfect tire to fill in fenders.
Nice i have a set of 15 and i was thinking on using 225-60-15 but i like how your truck wheels and tires looks like. Thanks!
jose sotelo I wouldn't go with the 225. they will stick out quite a bit and they will rub when making a tight turns. 215 sit perfect along fender line . I'm currently debating in switching the fronts to 205
Its beautiful Dude!
JOHNNY WHITE Thanks bro!
nice! looking to start lowering my 89 dakota this weekend how many inches down did the torsion bar crank take you?
Art Vandelay from factory I brought the bolt 2" down which pretty much was equivalent to the rear which was a 3" drop. I did trim front bump stops which brought it down a little lower (since it was sitting on bumps). I Had to readjust and play with torsion bar until I got it where I wanted it.
Tooslow_srt nice! thanks for the info
I got my new wheels on my truck man, check out my latest video, let me know what you think!
Sexy💋
😘
Dude looks great!! That fitment is perfect for a daily! What did you do for the front drop, torsion crank and ball joint flip? Thanks for the shoutout man, that was super cool of you!!
Jon Widmer Yes, torsion crank. I did not do ball joint flip bc I got it right where I wanted it. I just trimmed the bump stops almost about an inch. Truck is really low that it's sitting on the the bump stops. Don't know if that will be a problem? for now I will ride like that and maybe in the future raise it half an inch. Yeah had to give you credit for helping out. my bad couldn't really remember your last name.
Tooslow_srt You could do the ball joint flip and re-do the torsion bar setup and that will give you some clearance between the bump stop. The ball joint flip alone gives about an inch drop. I did this on my truck and the drop was an extra inch, the spindles lowered or 2", and the extra 1" with the BJ flip.
what modle is that with the sunroof
Did you bolt or just used the 3m tape on your spoiler?
How low are you on those 24's? I'm practically tucking my 22's and making the move to 24's but I don't want to lift it at all!!!
one question bro. whats the width and offset of that rim? Im getting my 24s next week. is that 24 x 9? 9.5? or 10? and what offset? I want it to tuck like yours do. Thanks bro.
These wheels are 5x114, 3, 300c originally a 5x115, you have some problem with the
Hey bro I just ordered these rims and I have a 300c am I gonna need spacers for the front? Mine is not lowered
or you can jus roll ur fenders like i did no rubbing at all
sportline.
eibach
24 inch d1 made by 2crave on fullway 275/25/24
they'll rub ony on reverse while turning ur wheels. but if u put in 24s without lowering u get no rubbing.
sportline. it works just fine. u just need to get ur fenders rolled in or u will have nasty rubbing.
yeah you have to get the top inner bolt thats inside fender of the front arms notch down. where ever you get ur rims installed should know about it!
do they rub in the front at all ?
hey bro.. which eibach springs did you use? pro kit or sportline? I have sportline at the moment on 22s. thinking about going 24s but not sure if it will work on my sportline drop kit. I also have a 300. Thanks
ay did u have to do any adjusting to make ur 24s fit???
around 9k invested. inside out
eibach lowering springs. you can also go with spring tech to save some cash. a lot cheaper and same quality.
thanks dawg...its all about giving it the right touch. not to much just to make it look clean!
what springs did you use?
@soxsucks yeah looks clean. handle and when its done post up some pics or vids to scope it out.
Ya I was surprised when they told me that it's a shop In Fresno but I think Im going to end up doing it I really like the look
Ya for everything I was surprised when they told me that lol but I'm going to go ahead and do it I really like the look
@soxsucks 1900 for all? damn thats pretty cheap! well u do have to roll fenders in if ur gonna lower it or else it will rub. but once they get rolled in theres no rubbing at all only on normal rubbing. such as reversing while turning tires. but other than that its pretty smooth riding and no rubbing.
Really? Did they replace the springs or cut then I went and ask a shop a couple days ago they told me 1900 for those rims,lowering and rolling fenders but said it would be rubbing so I'm not sure yet.
@soxsucks 2.7 inches all around
People just like messing with my car lol but I meant how much was it dropped like inches
@soxsucks why does it have a bad repu? i know the guy that lowered it for me so he charged me $300 parts and labor
How much was it lowered???
Thanks for all the help man I really needed to change my car up it has a bad reputation in my town