Wow thank you! First video I finally found that reset mine 🎉🎉🎉🎉
@wesmartindale6773 ай бұрын
What am i doing wrong???
@COJAZZ33 ай бұрын
It worked
@thejelliedpumpkin89763 ай бұрын
Bless you, felt like I was typing in the nuclear launch codes
@paulettebentler32754 ай бұрын
🙈 'Promo sm'
@lindahoffman36915 ай бұрын
This video finally helped me. I don’t understand why so many washing machines are made by so many companies that have to be calibrated. I didn’t know about this before I bought the machine. I will never ever buy another machine that has to be calibrated. Never!! Thank you again!
@Marianalopez-dm4rq7 ай бұрын
I can’t believe I fix my washer by myself
@christinezimmermann45027 ай бұрын
all the lights turn off after I press Start.
@zacharycrawford65198 ай бұрын
What if this doesn’t work. I’ve tried 30 million times. I’m about to just buy a new washer and fill the old one with tannerite.
@crazydesigner21448 ай бұрын
Anyone, what happens when it’s done re-calibrating? What lights are supposed to be on, etc.?
@wbwills29 ай бұрын
Unplug for a minute 1st .?.don’t think it can hurt.&..results vary,Thx. I have done this before after replacing parts. It finished quickly.Not this time..going through all sorts of functions..Did it this time because I noticed it was filling with cold after I had set to hot. Big down comforter about tore the machine up getting out of balance and full of water..TAKE LARGE ITEMS/fleece blankets ect to the laundromat!!! Don’t abuse/overwork your appliances
@waynetucker63099 ай бұрын
Thank you so much I did it and it working great you save me some money
@SCRATCHONEMORE10 ай бұрын
Ayoo theres a contra code for a washer! 😂
@rosejack645510 ай бұрын
I hate this garbage washer
@jorgecarcamo925810 ай бұрын
Hey there. Every time I follow these steps it resets it to "any bottom" will open. Can you help me here?
@robloxsirensandsootheandgl809311 ай бұрын
what's the model of this washer called
@streetveteran8928 Жыл бұрын
When is this actually needed? Mine is working fine but is this something to be done as pm or when the washer shows signs?
@brianburgess5909 Жыл бұрын
Your video is useless. Camera is too far from control knob to see what you did.
@brianburgess5909 Жыл бұрын
Why don’t you do it slower and closer so we can see what you did.
@dawnpaden4396 Жыл бұрын
What if nothing happens when you hit the button?
@joysca2476 Жыл бұрын
What button?
@propellerjfk Жыл бұрын
Man, thanks for this.
@wh9tewolf Жыл бұрын
Been looking for the right recalibration this worked thanks!
@samantaneverson2072 Жыл бұрын
Mines have 5 in the big round nobody. It's filling with water go ti the wash cycle then about 15 to 20 mins after throws out the water doesn't wash the clothes, then fills abs don't go into the rinse cycle and throws out the water again. Any help please. Technician said his price is $850 to to a diagnostic then system reboot
@garyr7027 Жыл бұрын
Shouldn't any possible codes be cleared first? I hate these new washers, it doesn't seem to take much to trigger something wrong even when there's really nothing wrong... Lol
@AJK_Buttons Жыл бұрын
I’ve got the same opener, how do I program a new universal remote?
@mathswithtmc3849 Жыл бұрын
Where is the dispenser? On this
@nanokabi677 Жыл бұрын
Why was it made in such a complicated way. Although it is a good company
@virtusetglorie Жыл бұрын
Didn't expect Markiplier reveal at the end lol
@MrsOGCeo8625 Жыл бұрын
I just got my brand new washer a few hours ago and trying it for the first time, it’s stuck on wash cycle 😢. I’m praying this works. I tried it and waiting to see what happens….
@Admin-ie9hp Жыл бұрын
So I did the calibration mode but yet my sensing light after everything done still says sensing and does not allow me to wash. Could it be the main board or load sensor?
@3ne2nr4life Жыл бұрын
Bought a brane new lid lock, now it's not even recognized after this calibration
@lisagarrison25315 Жыл бұрын
THANK YOU !!!
@BethSmith-ti5eg Жыл бұрын
I really don't like these new washers! Give me an old one any day that doesn't have any of this digital crap! Nothing but problems with this new model. I'll try to re-calibrate. Wish me luck as this new thing is hammered, not working right. It fills then no lights, acts like its draining.
@sariahlace5944 Жыл бұрын
These new washers are clearly design to need replacing much sooner,than the older models all these new features,are allegedly to make our lives simpler 🤷♀️ I prefer the more “manual old ones”. I think I need to this procedure much 🙏🙏.
@deadskinconsumption Жыл бұрын
thank you so much for the help gentlemen!
@timequest9802 Жыл бұрын
Great Job!!! Fast and to the point. Much appreciated!!!!
@RvmpWuxi Жыл бұрын
Don’t work for me
@michellemellick6235 Жыл бұрын
Thank you! We have 2 garage doors with their own motors with only 1 keypad. After reprogramming with these instructions, the first code is erased and the first door won't open. There used to be 2 codes saved. How do I make both codes stick?
@joshuajesso Жыл бұрын
Brother did all that ..still banging.. same machine. Bro ??
@felixmorales1427 Жыл бұрын
Hello, will this work on any model Whirlpool machine? Mine has the same controls except it's on the right side. My machine doesn't want to go into final spin, would this algorithm fix it too?
@destinyrichens1640 Жыл бұрын
Life savers! Thank you! I'm going to have to figure out how to buy you guys lunch or something. Thank you 😊
@Hyacinth600 Жыл бұрын
Those Washing machines are not good
@rugheadedporchmonkey Жыл бұрын
I will just close my garage door by hand thanks
@karawaters663 Жыл бұрын
I followed these steps and the lights all flash, but once I change cycle to rinse/spin and press START it goes dark and nothing happens. Am I missing something? Washer originally making clicking noise and not changing cycles after a load was heavy and caused off balance.
@ATOMSKI_MRAV Жыл бұрын
Mine doesn't want to to into calibration mode. I did it three times. What happens is the green lights flash moving left and then "click" it stops.
@nicolehibbert8375 Жыл бұрын
What was whirlpool thinking when they made this version of the washing machine this is backwards
@thelogicremains6096 Жыл бұрын
Maybe it would be better with the camera angle from the right, since he did it so quickly behind his hand, I couldn't catch it- even after 3 views.
@Prominent01 Жыл бұрын
I have this washing machine now and it’s horrible. After you do the first step, what happens if you select anything other than the rinse mode with the solid light?
Пікірлер
Wow thank you! First video I finally found that reset mine 🎉🎉🎉🎉
What am i doing wrong???
It worked
Bless you, felt like I was typing in the nuclear launch codes
🙈 'Promo sm'
This video finally helped me. I don’t understand why so many washing machines are made by so many companies that have to be calibrated. I didn’t know about this before I bought the machine. I will never ever buy another machine that has to be calibrated. Never!! Thank you again!
I can’t believe I fix my washer by myself
all the lights turn off after I press Start.
What if this doesn’t work. I’ve tried 30 million times. I’m about to just buy a new washer and fill the old one with tannerite.
Anyone, what happens when it’s done re-calibrating? What lights are supposed to be on, etc.?
Unplug for a minute 1st .?.don’t think it can hurt.&..results vary,Thx. I have done this before after replacing parts. It finished quickly.Not this time..going through all sorts of functions..Did it this time because I noticed it was filling with cold after I had set to hot. Big down comforter about tore the machine up getting out of balance and full of water..TAKE LARGE ITEMS/fleece blankets ect to the laundromat!!! Don’t abuse/overwork your appliances
Thank you so much I did it and it working great you save me some money
Ayoo theres a contra code for a washer! 😂
I hate this garbage washer
Hey there. Every time I follow these steps it resets it to "any bottom" will open. Can you help me here?
what's the model of this washer called
When is this actually needed? Mine is working fine but is this something to be done as pm or when the washer shows signs?
Your video is useless. Camera is too far from control knob to see what you did.
Why don’t you do it slower and closer so we can see what you did.
What if nothing happens when you hit the button?
What button?
Man, thanks for this.
Been looking for the right recalibration this worked thanks!
Mines have 5 in the big round nobody. It's filling with water go ti the wash cycle then about 15 to 20 mins after throws out the water doesn't wash the clothes, then fills abs don't go into the rinse cycle and throws out the water again. Any help please. Technician said his price is $850 to to a diagnostic then system reboot
Shouldn't any possible codes be cleared first? I hate these new washers, it doesn't seem to take much to trigger something wrong even when there's really nothing wrong... Lol
I’ve got the same opener, how do I program a new universal remote?
Where is the dispenser? On this
Why was it made in such a complicated way. Although it is a good company
Didn't expect Markiplier reveal at the end lol
I just got my brand new washer a few hours ago and trying it for the first time, it’s stuck on wash cycle 😢. I’m praying this works. I tried it and waiting to see what happens….
So I did the calibration mode but yet my sensing light after everything done still says sensing and does not allow me to wash. Could it be the main board or load sensor?
Bought a brane new lid lock, now it's not even recognized after this calibration
THANK YOU !!!
I really don't like these new washers! Give me an old one any day that doesn't have any of this digital crap! Nothing but problems with this new model. I'll try to re-calibrate. Wish me luck as this new thing is hammered, not working right. It fills then no lights, acts like its draining.
These new washers are clearly design to need replacing much sooner,than the older models all these new features,are allegedly to make our lives simpler 🤷♀️ I prefer the more “manual old ones”. I think I need to this procedure much 🙏🙏.
thank you so much for the help gentlemen!
Great Job!!! Fast and to the point. Much appreciated!!!!
Don’t work for me
Thank you! We have 2 garage doors with their own motors with only 1 keypad. After reprogramming with these instructions, the first code is erased and the first door won't open. There used to be 2 codes saved. How do I make both codes stick?
Brother did all that ..still banging.. same machine. Bro ??
Hello, will this work on any model Whirlpool machine? Mine has the same controls except it's on the right side. My machine doesn't want to go into final spin, would this algorithm fix it too?
Life savers! Thank you! I'm going to have to figure out how to buy you guys lunch or something. Thank you 😊
Those Washing machines are not good
I will just close my garage door by hand thanks
I followed these steps and the lights all flash, but once I change cycle to rinse/spin and press START it goes dark and nothing happens. Am I missing something? Washer originally making clicking noise and not changing cycles after a load was heavy and caused off balance.
Mine doesn't want to to into calibration mode. I did it three times. What happens is the green lights flash moving left and then "click" it stops.
What was whirlpool thinking when they made this version of the washing machine this is backwards
Maybe it would be better with the camera angle from the right, since he did it so quickly behind his hand, I couldn't catch it- even after 3 views.
I have this washing machine now and it’s horrible. After you do the first step, what happens if you select anything other than the rinse mode with the solid light?
Thank God for KZread