Пікірлер

• 
  @helixDNA6535Ай бұрын

  Thanks for posting this. I wish I knew about the screws holding the board in place; it would have made it much easier. This well be very helpful for future M6 and M10 buyers.

• 
  @greggholt1546Ай бұрын

  Great instructional.

• 
  @TheThestand101Ай бұрын

  Thanks... Gonna come in handy!

• 
  @msimpson20175Ай бұрын

  Does not help at all for my new M10

• 
  @user-bb9kl2xr8bАй бұрын

  thank you for sharing Fantastic video!

• 
  @TheThestand101Ай бұрын

  Using a Magnetic Allen wrench would have helped getting the faceplate screws back in. Also can the drum and front plate be cleaned using Cafiza to remove the burnt on oils?

• 
  @shorougmohammed4003Ай бұрын

  Hello i have an equiry if i order a phedget sensor with probe and i put it in my roaster but it did not represent the reads what should i do

• 
  @jerryhubbard4461Ай бұрын

  Did you acid wash the covers to get the rust look?

• 
  @lucasagazzni1476Ай бұрын

  Your info seems legit, I'm just still can't connect my dual system M10

• 
  @jhamm152 ай бұрын

  This looks like it will be my upgrade from a hot air pop corn popper, lol. The M1 looks like a waaaay better value than the Hottop roaster I've been checking out!

• 
  @LivingTheLifeRetired3 ай бұрын

  There is nothing I dislike about my new M1. It is super powerful with its dual burners and the most I ever need to use is 60% heat.

• 
  @LivingTheLifeRetired3 ай бұрын

  Great thanks. As you know the new M1s have two elements and it’s a beast. I never have to go above 60% power to roast.

• 
  @nbrikha3 ай бұрын

  Nope...doesn't work. Just says Kaleido disconnected. This has yet to work

• 
  @DaddyTokyo3 ай бұрын

  Great video. However, I am interested in downloading shared profiles. Is there a repository of Kaleido roast profiles?

• 
  @NassirTourisme4 ай бұрын

  Thank you for this interessing video. Please somone can you tell me what does : ET and BT and BT -1.4 mean?

• 
  @LivingTheLifeRetired4 ай бұрын

  This video got me up and running with Artisan and my Kaleido. Thank you.

• 
  @nbrikha4 ай бұрын

  Yeah mine not only hit that temp, it exceeded it and didn't shut off. Target temp was 200 and ET was 230 even though the burner was at 60%. Not sure what happened

• 
  @LivingTheLifeRetired4 ай бұрын

  This was really useful. Thank you.

• 
  @kirks.25654 ай бұрын

  Thank you for the step by step instructions. How would you recommend venting?

• 
  @burpst5 ай бұрын

  The newer version has different screws on the faceplate. Any guidance on removing the newer faceplate.

• 
  @lexper72445 ай бұрын

  I didnt know Seth Rogen was into coffee roasting, props to him for taking the time to do these videos, thanks!

• 
  @andersonk73386 ай бұрын

  I bought a Kaleido M1 Dual System recently. But I can’t connect it to my MacBook. There is something with the Mac IOS Sonoma version???

• 
  @LivingTheLifeRetired4 ай бұрын

  Did you get it working? I just bought an M1. Arriving soon.

• 
  @user-mz9zr5li7k6 ай бұрын

  I am so disgusted with my Kaliedo roaster. It was a christmas present and it has been nothing but crap. I have questions and need a little bit of help getting the machine configured. But there is no, zero, none, support. No phone number, no email, nothing. Right now, i turn on the artisan software and the SV slider is set at 250 deg F max. You cannot roast anything when the roaster wont go above 250 degrees. This slider needs to be set to work between 0-450 degrees f. I cannot figure out how to raise the max temp on the SV slider. Where can I get some help? My wife bought me this roaster for Christmas but right now its an $1800 piece of junk.

• 
  @BWtheHD2 ай бұрын

  There's a "control" button on the top right, after press it , you'll see a pop up screen, and there's a "set value" or "SV" allows you to put in min & max numbers in the box.

• 
  @pierrebrunet53366 ай бұрын

  Hi, great video of heat element replacement. Anyone would know where i can purchase roaster parts ( bean drum) for an M10 roaster ? thanks.

• 
  @HY_main6 ай бұрын

  Nice Artisan demo video. I try to connect the roast manual mockup equipment with Artisan software with modbus potocol and read/write data form thermal gauage, fan, heater and so on.

• 
  @73alfayellow6 ай бұрын

  Great tip, thanks!

• 
  @Youtuberkt7 ай бұрын

  Isn’t ET = Environment temp?

• 
  @73alfayellow7 ай бұрын

  Will this set up work with my Mac book pro running Sonoma? I’m having issues getting it to connect so far.

• 
  @-Vee_7 ай бұрын

  How much noise they make? Can you hear the first and second crack?

• 
  @user-qy1de6lg6y9 ай бұрын

  How often we need to clean the drum? Every day? Or after few roasts?

• 
  @kaleidoroasters9 ай бұрын

  Not a straight forward answer for this. Each bean will produce different amounts of chaff and oils. Average person roasting, as long as you dump chaff bin, every few months. If more commercially, definitely more often.

• 
  @yct69569 ай бұрын

  is that usb cable also install CH341SER driver? don't know is that win11 problem or what, the driver can't apply in the hardware device page hence can't use usb in the artisan thx

• 
  @kaleidoroasters9 ай бұрын

  Honestly not sure. Manufacturer supplies drivers to us for download. Can contact manufacturer if not working right.

• 
  @mattfh9 ай бұрын

  Is there a way for us to find which board version we have?

• 
  @kaleidoroasters9 ай бұрын

  As of right now, I do not think there is a way. Possibly they look a tad different but I have not figured out yet. More or less, if its the older model its board B, if its the Gen 2 Sealed, its board C. There might be a few out there with old build design and new board, as some people have purchased and swapped

• 
  @jaidenlee41289 ай бұрын

  How do you find the comport for a Mac?

• 
  @kaleidoroasters9 ай бұрын

  on mac there is only 1 com port, and its pretty intuitive. It will be the only one to show up.

• 
  @LuisFaya9 ай бұрын

  Thanks a lot!! I was about to call since I couldn't find a way to connect watchng the other videos.

• 
  @ducduy10119 ай бұрын

  Can you release a new video showing how to connect M1 or M2 Dual (HOT AIR lastest version) with artisan 2.8.4 for MacOS?

• 
  @kaleidoroasters9 ай бұрын

  Its already up!

• 
  @ducduy10119 ай бұрын

  thanks you so much@@kaleidoroasters

• 
  @neumindcollective10 ай бұрын

  whenever I connect the M-10 via bluetooth, it remains paired for a breif moment then says not connected shrotly after. any Idea? i have the dual system

• 
  @kaleidoroasters9 ай бұрын

  its supposed to do that. Need to configure artisan and have artisan request connection

• 
  @JPMetallic10 ай бұрын

  I'm currently home roasting manually with a Fresh Roast air roaster. Been at it for over a year and am frustrated with how touchy a roast can be. Strongly considering a Kaleido M1 with Artisan. But my question is this: Does Artisan actually control the roaster, taking most of the fine-tuning off of me?

• 
  @kaleidoroasters9 ай бұрын

  You can roast 2 different ways, with some hybrid methods in there as well. You can use a profile which you either develop or save and then repeat. People expect magic, it still requires some user input and tweaking. Alternatively a lot of people will have it follow a profile for most of the roast, and then finish manually. Lastly you can do a full manual roast either with or without a background to follow. It will be a bigger learning curve than the Fresh Roast.

• 
  @timblosser24847 ай бұрын

  @@kaleidoroasters Are you aware of Kaleido S10 profiles already developed we can download to use as a starting-point rather than creating them from scratch? Thanks! 😃

• 
  @squallx84010 ай бұрын

  I have the M2 Artisan with single heater, so this video is very useful as reference when I added another heating element to the roaster. Thanks!

• 
  @rockfitclub10 ай бұрын

  thank you

• 
  @lindalomeli690610 ай бұрын

  Would you be interested in doing this type of tutorial for the multiple heating element Kaleidos? The M2 is a different cable set up than this M1 that requires a ring terminal.

• 
  @kaleidoroasters10 ай бұрын

  Its identical for all 4 models. Ring terminal just simply remove the screw and replace the wire.

• 
  @timblackmore88411 ай бұрын

  it would be cool to see a comparison of the baskets in each one.

• 
  @timblackmore88411 ай бұрын

  Now that Kaleido is supported from with the program do you still need the set-up files?

• 
  @kaleidoroasters10 ай бұрын

  Artisan has not 100% Officially adopted Kaleido. It works for most roasters but a few you need to make a few changes in order for it to work.

• 
  @timblackmore88410 ай бұрын

  @@kaleidoroasters I actually did manage to get mine working without any additional set-up files. Went very smooth.

• 
  @craigw464411 ай бұрын

  M6 arrives in a few days, used a modified Behmore + for the last 6-years: Ran hundreds of pounds through the Behmore. Really looking forward to playing with Artisan and trying some high end seeds. Getting quite an upgrade, hardware & software. Thanks for posting.

• 
  @carlover58711 ай бұрын

  What are your thoughts on the M2S?

• 
  @kaleidoroasters11 ай бұрын

  Don't have it yet, so don't know yet

• 
  @felixmumia3926 Жыл бұрын

  Nice thanks for the heads up just one more insight what are the settings for repeating or copying a roast profile

• 
  @user-hw2iw3lm9f Жыл бұрын

  Hi , Thank you for the video. Can you please let us know how to pre heat the roaster.

• 
  @camronpreciado954011 ай бұрын

  need help did you figure it out??

• 
  @coreybarnes6325 Жыл бұрын

  i think it would be really cool to get a step by step video for beginners showing how to heat,charging ,dropping beans..just seeing the full process so beginners can learn and understand how to start roasting.

• 
  @kaleidoroasters10 ай бұрын

  There are several out there. You might check these out. kzread.info/dash/bejne/kYSEpNyAgqW1mqg.html

• 
  @AZDI8 Жыл бұрын

  Thank you so much for your amazing effort. I am using m6 pro connected by bluetooth and I tried to use usb but it did not work >> using surface pro 5 windows.11.. thanks in advance🙏

• 
  @kaleidoroasters Жыл бұрын

  Hey! There is a USB driver you need to install, should be quick and easy. You can find here kaleidoroasters.com/pages/setting-up-your-artisan-enabled-roaster-pro-dual-systems

• 
  @camronpreciado9540 Жыл бұрын

  i think you are colorblind cause that is blue not brown 7:45

• 
  @Tron0903 Жыл бұрын

  Just ordered my 1st roaster the m6..what should I run to it for ventilation and where should I go for info

• 
  @kaleidoroasters Жыл бұрын

  For now its probably best to roast in the garage. People have rigged up ventilation adapters. We are working to get some adapters made.