It never occurred to me I might see a video from someone with same last name and here in TN. Nice repair work 🛠
@timotgynewman33244 күн бұрын
Great video
@BernieKathie6 күн бұрын
Good job John!!
@Lapeerphoto6 күн бұрын
Nice job, John!!
@ebohm23026 күн бұрын
Looks like you are staying busy, John! It was a pleasure to meet you in Greenville. Hopefully we can reconnect sometime in the future. Keep up the great work!
@chargermikec11 күн бұрын
Much obliged for the very thorough tutorial that you took the time put together for us all. I’m still contemplating whether I want to take on this ordeal but if I do decide to do the repairs, at least I won’t go into it not knowing what to do.
@millenniumtekks994317 күн бұрын
Great video!
@pooleo8Ай бұрын
Could really use a pic of how the wiring is ran. Having a hard time getting the triangle cover back on. I had to unwrap it, had 5 cut/broken wires deep inside the harness
@Haye5120Ай бұрын
how did you get the end of the telescope off that holds the actual mirror piece, so you could slide the triangle trim piece off? I cannot figure that part out.
@caseycourtney4811Ай бұрын
This looks like a great place to take my 8 year old. Is this off Copeland Cove Rd?
@timjk32Ай бұрын
Would tapping into the tail light wire work for hooking up a set of auxiliary lights? Is that the same as tapping into an ACC wire?.
@petepete3389Ай бұрын
You didn't need a relay for such a low draw. A simple power-side switch would do fine directly from the battery to the usb. Add an inline fuse to be safe.
@Whitewater112 ай бұрын
Does anyone know if the process on a 2021 is pretty similar?
@pooleo8Ай бұрын
Very similar. I've got my 18 tow mirrors torn down. A few things were slightly different, but same ideas apply. Take extra caution/pics of the harness as you pull the triangle cover off.
@reensmusic2 ай бұрын
excellant viedo thank you
@skitchonwheels2 ай бұрын
Hey John, I watched this whole series already. What a huge task and accomplishment. Nice toy hauler you have made!
@johntalbert82272 ай бұрын
Glad you enjoyed it. Loved your video, look forward to riding with you again.
@TheAdobeCreekBand3 ай бұрын
Hey John. Thanks for the video. Trying to decide if this will fix my mirrors. I have a lot play in them
@johntalbert82272 ай бұрын
Glad to help
@outdoorsandstuff17443 ай бұрын
I wish I was brave enough to attempt…you made it look easy. Thanks.
@descottdc3 ай бұрын
Great info. Tks. But the poster in the background was a great bonus.
@johntalbert82272 ай бұрын
Glad you liked it! Couple of my favorite girls.
@daveschatzley17463 ай бұрын
my RH mirror was caught and forced all the way forward. The fold motor works but the mirror doesn't stay at the driving position. It folds out all the way forward. Any ideas? Ive tried resetting / re-synch with no joy. Really miss that function but I cant justify $1400. Somewhere I saw someone say the incident broke some sort of pin.
@johntalbert82272 ай бұрын
I would just follow the video and tear your mirror apart. Can't say what the issue is, but when you get it apart you will find out what has broken and may be able to fix it. Good luck. Sorry I didn't see your comment earlier.
@tonyfletcher25413 ай бұрын
It is nice to see a Talbert driving a Ford! All the Talbert's here in Arkansas are Chevy fans! LOL Thanks for the great video!
@johntalbert82272 ай бұрын
You bet! Got me laughing. I can't be responsible for my kinfolk in Arkansas!
@samwittstruck.66853 ай бұрын
Well done!!
@solman11454 ай бұрын
Thanks for posting this Does the mirror head just slide off the arms after all the plastic is removed. You didn't show how it comes off
@johntalbert82272 ай бұрын
Around the 16:15 mark I explain how to do it. When you are at that stage you will see how it comes apart.
@chrisfeetham189828 күн бұрын
@@johntalbert8227 no you didn't - watched that, no help, when you said "unfortunately" at 16:55, everything was apart and no help at 16:15 for that either. I see below someone had to "electrically engage the slide motor to get the head off, did you have to do that? I have all plastic pieces off, top and bottom, and triangular trim piece loose but captive on the two arms, can't get the end off the slides.
@rickalexander35734 ай бұрын
Good video! We just got back from there. I think a lot of people must have edited their videos,but yours was not. It showed all the hard spots and there were a few. I have a hoda africa twin,and it seems too big. Me or my brother never took a spill,but we had one guy that dumped it once.
@johntalbert82272 ай бұрын
Glad you enjoyed it. I left in the hard spots, because they were the most fun!
@krisjordan80374 ай бұрын
Thank you for the video John. I have ordered the parts and will be doing both of mine when they come in. My passenger side has been broken for about 7 years!! Great job brother!
@johntalbert82272 ай бұрын
Glad it helped, good luck with the repair. Mine is still working great.
@bradralph33174 ай бұрын
Thank you for your advise. I have the kits but have not installed. I did not know how to start this project.
@AndreychukAndrey4 ай бұрын
Do the 2 tow arm align themselves when you activate the auto fold?
@johntalbert82272 ай бұрын
I believe yes. I didn't don anything but cycle the mirror in and out a couple of time.
@AndreychukAndrey2 ай бұрын
@@johntalbert8227 Ok thanks. I got it done. My motors where fine. My issue is I had a ripped wire. Also to stide the mirror of the tracks I used a battery and some wire and touch the motor and I was able to slide it of the tracks and did the same thing on reverse and slide it back on. Thank you your video helped a lot.
@corytolman16345 ай бұрын
Thank you sir ! I have been waiting years for a in depth video to do this!
@Metallicgray_6.75 ай бұрын
Thanks for sharing. I’m about to do this to my 13’ F-250 tomorrow. Wish me luck.
@johnvitz3105 ай бұрын
You sir have incredible patience,,,,,I’m going out to duct tape mine back on. Thank you
@arborviewtreeservice5 ай бұрын
Thank you!!!!!🙏🏻
@nicholasbonvouloir1435 ай бұрын
Thank you for taking the time to make this video. It has been so helpful.
@timgiles94136 ай бұрын
Is this episode 10?
@timgiles94136 ай бұрын
Those holes in the floor and wall are totally unacceptable. I would have had the manufacturer to do the repairs. Also the grommets. Talk about getting a shock, wow. Just started watching your video series. I'm thinking about a 7x14 myself. FYI, Your mic needs more volume.
@BusyAsABeaver726 ай бұрын
❤ thanks John.
@billevans30677 ай бұрын
I need to do this project for a 2013. I started collecting videos on how to do it a couple years ago. All prior videos left key bits of info out of the explanation. This is the best explanation on the topic. Thank you. I'm saving this one to the top of my collection on the topic.
@johntalbert82277 ай бұрын
Glad I could be of some help. The products are excellent, and working great in my installation. Good luck.
@NDpendentconnection7 ай бұрын
Mr. John, thank you for sharing your journeys and cargo trailer conversion build. Its really nice to watch an entire video without interuption of commercial. Thanks again
@stoneymtnboyz7 ай бұрын
Awesome build brotha , definitely going to be using some of these ideas on our enclosed trailer build ! We are hauling ATVS and dirtbikes in the same size trailer but want to convert it over like this one
@johntalbert82277 ай бұрын
Thanks for the kind words. Good luck on your build.
@JustMe-dv5ix7 ай бұрын
I was happy to see you put the wires in a Loom. I would put on a bit of silicone adhesive on the splice to make sure it would not corrode. Good job, something will do over the winter.
@DrJohn4938 ай бұрын
Enjoyed this two-parter of the Jack Best CG and the CNF in the Tellico/Citico Creek area. Visit the area often fly fishing and enjoyed about a week at Jake Best this past Spring.
@mrr86828 ай бұрын
Thank You!!!
@gordeng40018 ай бұрын
Right Ooown! Looks good. Bet it will be just fine! Saves a bunch of money too!
@ogocomposttoilet9 ай бұрын
Nice handle, love the detail and ingenuity.
@tommy400ex9 ай бұрын
Thanks for the video. I was ready to buy new and now i can fix mine.
@johnattinello291110 ай бұрын
I have a Trail Ridge mirror that is not working correctly, so I watched this video all the way through to see if the procedures were similar. I can see why it took so long to repair. Kodos to this gentleman for taking the time to video this project. Looks like there are plenty of opportunities to break tabs during the process. If you start breaking tabs then rebuilding the mirrors may have been in vain. I know this gentleman was not a professional and there were times were he repeated himself and it made the video longer than it should have been, but again thank you for your time and the video.
@regdor818710 ай бұрын
I can see Why they only sell the Whole assembly, with age, the plastic will become brittle and all those snap and clips will break, and there are no replacement parts....Better if you want to keep the Truck, replace the whole thing, if that is too much, by a truck that doesn't have all that plastic rickey tickey made parts (if you can).....
@calypsonotch395311 ай бұрын
How many bikes can you fit in there? and is the weight of the bikes over the axles?
@johntalbert822711 ай бұрын
Depends on what kind of bikes? Full dress harley I don't know if two will sit side by side. I have put a couple of full size bikes side by side, then a smaller bike in front of those two. As far as the wt, I don't have any issues with my build, I have plenty of nose wt to compensate for the bikes. If you were to build one you would have to figure all that out for your situation and what kind of bikes you have.
@mountainmangarage757211 ай бұрын
Great trip!
@user-rc2po8zb7s11 ай бұрын
Great video, John. I like the handle!!!
@Lapeerphoto Жыл бұрын
Hey John, How is the road to that Jack Best campground? Any problem getting my 20' toy hauler in there? Great adventure!! Thanks for taking us along. Beautiful nature down that way!
@johntalbert822711 ай бұрын
You wouldn't have any problems. Mine whole rig with truck is 42 feet and it was no problem at all.
Пікірлер
It never occurred to me I might see a video from someone with same last name and here in TN. Nice repair work 🛠
Great video
Good job John!!
Nice job, John!!
Looks like you are staying busy, John! It was a pleasure to meet you in Greenville. Hopefully we can reconnect sometime in the future. Keep up the great work!
Much obliged for the very thorough tutorial that you took the time put together for us all. I’m still contemplating whether I want to take on this ordeal but if I do decide to do the repairs, at least I won’t go into it not knowing what to do.
Great video!
Could really use a pic of how the wiring is ran. Having a hard time getting the triangle cover back on. I had to unwrap it, had 5 cut/broken wires deep inside the harness
how did you get the end of the telescope off that holds the actual mirror piece, so you could slide the triangle trim piece off? I cannot figure that part out.
This looks like a great place to take my 8 year old. Is this off Copeland Cove Rd?
Would tapping into the tail light wire work for hooking up a set of auxiliary lights? Is that the same as tapping into an ACC wire?.
You didn't need a relay for such a low draw. A simple power-side switch would do fine directly from the battery to the usb. Add an inline fuse to be safe.
Does anyone know if the process on a 2021 is pretty similar?
Very similar. I've got my 18 tow mirrors torn down. A few things were slightly different, but same ideas apply. Take extra caution/pics of the harness as you pull the triangle cover off.
excellant viedo thank you
Hey John, I watched this whole series already. What a huge task and accomplishment. Nice toy hauler you have made!
Glad you enjoyed it. Loved your video, look forward to riding with you again.
Hey John. Thanks for the video. Trying to decide if this will fix my mirrors. I have a lot play in them
Glad to help
I wish I was brave enough to attempt…you made it look easy. Thanks.
Great info. Tks. But the poster in the background was a great bonus.
Glad you liked it! Couple of my favorite girls.
my RH mirror was caught and forced all the way forward. The fold motor works but the mirror doesn't stay at the driving position. It folds out all the way forward. Any ideas? Ive tried resetting / re-synch with no joy. Really miss that function but I cant justify $1400. Somewhere I saw someone say the incident broke some sort of pin.
I would just follow the video and tear your mirror apart. Can't say what the issue is, but when you get it apart you will find out what has broken and may be able to fix it. Good luck. Sorry I didn't see your comment earlier.
It is nice to see a Talbert driving a Ford! All the Talbert's here in Arkansas are Chevy fans! LOL Thanks for the great video!
You bet! Got me laughing. I can't be responsible for my kinfolk in Arkansas!
Well done!!
Thanks for posting this Does the mirror head just slide off the arms after all the plastic is removed. You didn't show how it comes off
Around the 16:15 mark I explain how to do it. When you are at that stage you will see how it comes apart.
@@johntalbert8227 no you didn't - watched that, no help, when you said "unfortunately" at 16:55, everything was apart and no help at 16:15 for that either. I see below someone had to "electrically engage the slide motor to get the head off, did you have to do that? I have all plastic pieces off, top and bottom, and triangular trim piece loose but captive on the two arms, can't get the end off the slides.
Good video! We just got back from there. I think a lot of people must have edited their videos,but yours was not. It showed all the hard spots and there were a few. I have a hoda africa twin,and it seems too big. Me or my brother never took a spill,but we had one guy that dumped it once.
Glad you enjoyed it. I left in the hard spots, because they were the most fun!
Thank you for the video John. I have ordered the parts and will be doing both of mine when they come in. My passenger side has been broken for about 7 years!! Great job brother!
Glad it helped, good luck with the repair. Mine is still working great.
Thank you for your advise. I have the kits but have not installed. I did not know how to start this project.
Do the 2 tow arm align themselves when you activate the auto fold?
I believe yes. I didn't don anything but cycle the mirror in and out a couple of time.
@@johntalbert8227 Ok thanks. I got it done. My motors where fine. My issue is I had a ripped wire. Also to stide the mirror of the tracks I used a battery and some wire and touch the motor and I was able to slide it of the tracks and did the same thing on reverse and slide it back on. Thank you your video helped a lot.
Thank you sir ! I have been waiting years for a in depth video to do this!
Thanks for sharing. I’m about to do this to my 13’ F-250 tomorrow. Wish me luck.
You sir have incredible patience,,,,,I’m going out to duct tape mine back on. Thank you
Thank you!!!!!🙏🏻
Thank you for taking the time to make this video. It has been so helpful.
Is this episode 10?
Those holes in the floor and wall are totally unacceptable. I would have had the manufacturer to do the repairs. Also the grommets. Talk about getting a shock, wow. Just started watching your video series. I'm thinking about a 7x14 myself. FYI, Your mic needs more volume.
❤ thanks John.
I need to do this project for a 2013. I started collecting videos on how to do it a couple years ago. All prior videos left key bits of info out of the explanation. This is the best explanation on the topic. Thank you. I'm saving this one to the top of my collection on the topic.
Glad I could be of some help. The products are excellent, and working great in my installation. Good luck.
Mr. John, thank you for sharing your journeys and cargo trailer conversion build. Its really nice to watch an entire video without interuption of commercial. Thanks again
Awesome build brotha , definitely going to be using some of these ideas on our enclosed trailer build ! We are hauling ATVS and dirtbikes in the same size trailer but want to convert it over like this one
Thanks for the kind words. Good luck on your build.
I was happy to see you put the wires in a Loom. I would put on a bit of silicone adhesive on the splice to make sure it would not corrode. Good job, something will do over the winter.
Enjoyed this two-parter of the Jack Best CG and the CNF in the Tellico/Citico Creek area. Visit the area often fly fishing and enjoyed about a week at Jake Best this past Spring.
Thank You!!!
Right Ooown! Looks good. Bet it will be just fine! Saves a bunch of money too!
Nice handle, love the detail and ingenuity.
Thanks for the video. I was ready to buy new and now i can fix mine.
I have a Trail Ridge mirror that is not working correctly, so I watched this video all the way through to see if the procedures were similar. I can see why it took so long to repair. Kodos to this gentleman for taking the time to video this project. Looks like there are plenty of opportunities to break tabs during the process. If you start breaking tabs then rebuilding the mirrors may have been in vain. I know this gentleman was not a professional and there were times were he repeated himself and it made the video longer than it should have been, but again thank you for your time and the video.
I can see Why they only sell the Whole assembly, with age, the plastic will become brittle and all those snap and clips will break, and there are no replacement parts....Better if you want to keep the Truck, replace the whole thing, if that is too much, by a truck that doesn't have all that plastic rickey tickey made parts (if you can).....
How many bikes can you fit in there? and is the weight of the bikes over the axles?
Depends on what kind of bikes? Full dress harley I don't know if two will sit side by side. I have put a couple of full size bikes side by side, then a smaller bike in front of those two. As far as the wt, I don't have any issues with my build, I have plenty of nose wt to compensate for the bikes. If you were to build one you would have to figure all that out for your situation and what kind of bikes you have.
Great trip!
Great video, John. I like the handle!!!
Hey John, How is the road to that Jack Best campground? Any problem getting my 20' toy hauler in there? Great adventure!! Thanks for taking us along. Beautiful nature down that way!
You wouldn't have any problems. Mine whole rig with truck is 42 feet and it was no problem at all.