6 seater must be easier than the 3. I only have the one rear bearing to replace and I can't get that driveshaft out. Guessing I'll have to unbolt the front diff
@samora3 Жыл бұрын
great video
@user-qy3ve1dl4i Жыл бұрын
Can you tell me the website to get an empire exhaust
@dnksdad Жыл бұрын
Bought mine from atv tire nation
@xGR1MxREAPERx Жыл бұрын
I’ve got 2000 miles of hard mud riding in MN with my 2022 Renegade xmr with no rad relocate and it is perfectly clean still lol.. it has a removable plastic piece and it’s simple to wash with a hose. Not sure why everyone lives the red relocates. They are ugly af lol. Just clean your machine and take care of it and rad will never plug up.
@seatsniffer100 Жыл бұрын
I can't find this anywhere. Honestly. ridden like you stole it half the time and good maintenance how many kms can these last before it can't drive Planning a big trip and want somthing fun. Hondas imo don't make fun atv
@garygordon8974 Жыл бұрын
I watched this video and bought a like new 21 850XMR the next day. I'd rather drive alone and hardly ever have a guest that really wants to ride on the same machine. In regards to tracking I have always found longer vehicles like long bed Tacoma handled and tracked better at high speed off roading. The same goes for ATV's in my opinion. I agree 100% renegade does Not fit my needs. It doesn't have the rad relocated and also the outlander has a rack for mounting lights etc. The 850 shorter wheel base is more fun and nimble on trails. The can ams are already very heavy so after owning a 16 outlander 1000 I said to self never getting a two up. My experience and thoughts!
@canamdennis6829 Жыл бұрын
that's one nice quad bro wow it looks good
@wannabejeeper Жыл бұрын
This is exactly what I was looking for! Thanks for the great comparison. I last had a 2019 Maverick Sport XMR and the stiff ride drove me nuts. I'm concerned the Outlander will be the same.
@dnksdad Жыл бұрын
The xmr outlanders are definitely stiff, but the newer models are much better than say a 2018 model. I backed my springs off an inch and it made it ride nice and plush. I actually ended up stiffening it back up once shocks broke in as I found myself bottoming once in a while. If you want super soft and plush a recommend an xt. My wife's xt is like riding on a cloud.
@wannabejeeper Жыл бұрын
@@dnksdad I was thinking Max XTP, as they're pretty much the same price, but I think it's easier to put a 2 up seat, and upgraded coilovers on an XMR then it is to put the rad relocate, on the XTP. Good to know that backing off the preload made such a big difference!
@riosalexis166 Жыл бұрын
I love my XTP 850 I race the renegades 1000 and I almost stay with them the whole time
@Elite69Halo Жыл бұрын
weight difference is 24 pounds.. not 120
@jetbikes1 Жыл бұрын
Well after watching I came up with the conclusion ! A Small cup of Starbucks Coffee is the same size as Their Large cup of Coffee ! You just pay more for their Trick Cup !
@crackedfingerz Жыл бұрын
You can buy a set of spring compressors for about the same price of those 2 ratchet straps you ruined. Just saying...
@dnksdad Жыл бұрын
Probably but that wouldn't get 28000 views
@Al-xc1zj Жыл бұрын
Lmao “cost about 55-60 bucks Canada or 7-8 dollars American” funny yet true! Great content, thanks for the video
@shilosheena2 жыл бұрын
I subbed only cause u guys ugly like me lol good riding trails good I up around englehart
@fazerjaime80352 жыл бұрын
you can still fit 2 average sized people on an 850 pretty well
@jasoncarter4112 жыл бұрын
That’s gotta make ya smile, she purrin brother!
@jasoncarter4112 жыл бұрын
That’s gotta make ya smile. She purrin brother!
@jasoncarter4112 жыл бұрын
Those emblems are freaking sweet!
@jasoncarter4112 жыл бұрын
Great vid guys, damn nice bikes!
@dnksdad2 жыл бұрын
Thank you for watching !!
@destry18582 жыл бұрын
The 1000 XMR uses a SxS gearbox. That is why the shifting is different and the shift rod is in a different location.
@mudpunisher93152 жыл бұрын
hey where did you get the touch up paint from? thanks
@bigjoe56592 жыл бұрын
Did you get any gains with the exaust and the tuner?
@markbernard10322 жыл бұрын
You got screwed on the price. All day in Louisiana 11,000.
@dnksdad2 жыл бұрын
Ya were in canada so we pay a ton more for the same products. We're always getting screwed trust me
@markbernard10322 жыл бұрын
That’s crazy, really didn’t know y’all were from Canada doing the video. That’s a lot a money to spend on a recreational toy. That’s what we call them anyway. I’m getting to purchase a 850. List price $10999.
@georgioantoine41942 жыл бұрын
@@dnksdad that trudoe guy is a pee wee herman thats why. needs to be booted out. 19K FOK
@1duramaxhd2 жыл бұрын
Please send me a link where you can get a brand new xmr 850 for $11,000. 😂
@markbernard10322 жыл бұрын
The name of the company is Friendly Honda in Baton Rouge La. But I have to tell you, all the extra cost that’s added to the original price is crazy. They are starting to charge unboxing fee, delivery fee, and then you have to pay your tax, title, license. So now your out door price is around $14,500 - $15,000 depending on tax rate. Since Covid everything is high and hard to get.
@bozscaggzz74752 жыл бұрын
How can you drive with those massive balls you have?
@mpfoote2 жыл бұрын
The reason it didn't fit right and was kinking is because you skipped a crucial step. You're supposed to cut the console support first and there's a template for it.
@Williamxmr5 ай бұрын
Yup
@nickm7182 жыл бұрын
Can you post the links for both pieces please
@reeldealent.76452 жыл бұрын
I have a can AM 570 XMR with the 4.4 digital display. Will that work on mine?
@coltonspeer30052 жыл бұрын
Where did you order the exhaust from? Thanks
@dnksdad2 жыл бұрын
Atv tire nation in Kingston.
@coltonspeer30052 жыл бұрын
@@dnksdad thanks!
@Luke_Cullen2 жыл бұрын
Good informative video, only thing I suggest is a wireless mic so we can hear you guys better 🤙 Also to keep people watching the video longer, cut any second where there isn’t talking or something that is going on, I do that with my brothers videos
@avidhuntr2 жыл бұрын
Ordered a set of these from Dirty Life and they did not fit near as well as yours seem do. Large gaps, I've got to pull the front fenders in I'd say approximately a full inch to meet the foot well. Had to trim some of the steel away just so the fender would line up in the bend where the outer torx screws are. Not really happy with these foot well at all, but being a metal fabricator by trade I've made them work. I reached out to far mudding with my issues and never got a response. Won't be purchasing anything else from these people, wished I'd have bought the lucky 7's instead. Great video though hell of a machine love mine. Happy trails
@leof95022 жыл бұрын
LMAOO
@ZachMontizor2 жыл бұрын
First time using this method on such a small shock. Thanks for the tip on just hacking the hooks off the ratchet strap so it works better and safer. Thanks for the vid!
@dnksdad2 жыл бұрын
Glad it worked for you ! Thanks for watching
@ericferguson41142 жыл бұрын
I’m looking to replace my Yoshimura with one of these. Is it annoying on the trails?
@dnksdad2 жыл бұрын
Well after an all day ride yes it's a bit much. It's loud, but at the same time sounds so good . I'd say go for it unless you always ride all day. Then just keep the yosh.
@RobMillerATV2 жыл бұрын
Looks good fellas. Nice that those tires are light.
@dnksdad2 жыл бұрын
Thank you ! Yes winter can't go away fast enough now . I can't wait to try them out ! Thanks for watching!
@RobMillerATV2 жыл бұрын
@Northern Ontario Trail Stompers I have different offset wheels. And my front tires still hit the fender. But you should be fine with stock wheels. Oil change is way easier with those floorboards too. I love mine.
@dnksdad2 жыл бұрын
I heard that. I'm looking forward to the next oil change. Before it was a real chore. I haven't even tried on my wife's two up. I sent it to the dealer. Such a pain in the ass lol
@RobMillerATV2 жыл бұрын
@Northern Ontario Trail Stompers I have trouble with the rear drive shaft coming loose. If you remove the side plate by the brake pedal you can really crank on the drive shaft bolt. Way better than trying to tighten it from underneath. Wish I knew I could have got them to Lazer my name in them. My wife stole the shirt that came with them. Lol.
@bigsexysadventures39422 жыл бұрын
All I hear is the guy holding the phone heavy breathing
@dnksdad2 жыл бұрын
We hear that too ! Mouth breathers lmao ! Problem has been noted and hopefully will be corrected in the next vid ! Thanks for watching !
@19ramcharger922 жыл бұрын
Hey y’all. Just stumbled upon you guys, digging the videos and your casual attitudes. I subbed to the channel. Looking forward to the content! Howdy from South Texas🤘🏼
@dnksdad2 жыл бұрын
Thanks eh ! 😉
@mauriziopellegrino36342 жыл бұрын
What skid plates are you guys using?
@dnksdad2 жыл бұрын
850 is all stock plastic, and the 1k has the brp aluminum skid plate set.
@mauriziopellegrino36342 жыл бұрын
@@dnksdad are the brp skid plates any good because I'm waiting for my 2022 outlander and debating on which skid plates to get
@dnksdad2 жыл бұрын
They're definitely solid.
@jacksonpond13372 жыл бұрын
Where did you get the tires from?
@dnksdad2 жыл бұрын
L1fe outdoors. Bought them online and they shipped to me.
@rooseveltrainesjr76182 жыл бұрын
I don't believe it reny more than outlander. I just got 1000 xmr. Love my bike
@mouseclicksforu97242 жыл бұрын
Nice! Happy for you! My dream quad is a canam 570 xmr hopefully in 2-3 years or next year!
@OverlandBritishColumbia2 жыл бұрын
Nice color
@frankensteinsportsmanatv2 жыл бұрын
Awesome video, bike is looking mint 👌
@dnksdad2 жыл бұрын
Thanks ! I'm definitely loving it !
@ADVENTURESThisWay2 жыл бұрын
Looks like a weapon now Jeremy! Trust me you can rip trails with these tires. I'm curious to see how they perform in the deep snow.
@dnksdad2 жыл бұрын
Me too, can't wait for next season to get some full on riding on them. I'm thinking once I get it clutched, we'll try some snow. We don't have much yet unfortunately. Thanks for watching! 👊
Пікірлер
Damn u done making vids ??!
For now yes. Life has just gotten too busy. Barely been riding and just working. But we still may be back in the near future. Thanks for watching!
@@dnksdadokay , looking forward to it !
Does the tune hurt the fuel economy?
The outlander 1000xr way better mine was 20k. But got lights blade an big box on light on back
Is not a bike. Is a Atv😅.
Where can I find a new nut?
How did you find the custom Sasquatch buttons for the front and rear emblems? Tried looking on their page on Facebook and couldn’t see anything
Basically paying $2000 extra to bring the wife along safely and comfortably and legally....works for me 👍 Thanks for the vid....
Well you don’t have to worry about dust by the looks of it but here’s mud in your eye. hahaha
850: bigger bore, shorter stroke. 1000: Smaller bore, Longer stroke.
6 seater must be easier than the 3. I only have the one rear bearing to replace and I can't get that driveshaft out. Guessing I'll have to unbolt the front diff
great video
Can you tell me the website to get an empire exhaust
Bought mine from atv tire nation
I’ve got 2000 miles of hard mud riding in MN with my 2022 Renegade xmr with no rad relocate and it is perfectly clean still lol.. it has a removable plastic piece and it’s simple to wash with a hose. Not sure why everyone lives the red relocates. They are ugly af lol. Just clean your machine and take care of it and rad will never plug up.
I can't find this anywhere. Honestly. ridden like you stole it half the time and good maintenance how many kms can these last before it can't drive Planning a big trip and want somthing fun. Hondas imo don't make fun atv
I watched this video and bought a like new 21 850XMR the next day. I'd rather drive alone and hardly ever have a guest that really wants to ride on the same machine. In regards to tracking I have always found longer vehicles like long bed Tacoma handled and tracked better at high speed off roading. The same goes for ATV's in my opinion. I agree 100% renegade does Not fit my needs. It doesn't have the rad relocated and also the outlander has a rack for mounting lights etc. The 850 shorter wheel base is more fun and nimble on trails. The can ams are already very heavy so after owning a 16 outlander 1000 I said to self never getting a two up. My experience and thoughts!
that's one nice quad bro wow it looks good
This is exactly what I was looking for! Thanks for the great comparison. I last had a 2019 Maverick Sport XMR and the stiff ride drove me nuts. I'm concerned the Outlander will be the same.
The xmr outlanders are definitely stiff, but the newer models are much better than say a 2018 model. I backed my springs off an inch and it made it ride nice and plush. I actually ended up stiffening it back up once shocks broke in as I found myself bottoming once in a while. If you want super soft and plush a recommend an xt. My wife's xt is like riding on a cloud.
@@dnksdad I was thinking Max XTP, as they're pretty much the same price, but I think it's easier to put a 2 up seat, and upgraded coilovers on an XMR then it is to put the rad relocate, on the XTP. Good to know that backing off the preload made such a big difference!
I love my XTP 850 I race the renegades 1000 and I almost stay with them the whole time
weight difference is 24 pounds.. not 120
Well after watching I came up with the conclusion ! A Small cup of Starbucks Coffee is the same size as Their Large cup of Coffee ! You just pay more for their Trick Cup !
You can buy a set of spring compressors for about the same price of those 2 ratchet straps you ruined. Just saying...
Probably but that wouldn't get 28000 views
Lmao “cost about 55-60 bucks Canada or 7-8 dollars American” funny yet true! Great content, thanks for the video
I subbed only cause u guys ugly like me lol good riding trails good I up around englehart
you can still fit 2 average sized people on an 850 pretty well
That’s gotta make ya smile, she purrin brother!
That’s gotta make ya smile. She purrin brother!
Those emblems are freaking sweet!
Great vid guys, damn nice bikes!
Thank you for watching !!
The 1000 XMR uses a SxS gearbox. That is why the shifting is different and the shift rod is in a different location.
hey where did you get the touch up paint from? thanks
Did you get any gains with the exaust and the tuner?
You got screwed on the price. All day in Louisiana 11,000.
Ya were in canada so we pay a ton more for the same products. We're always getting screwed trust me
That’s crazy, really didn’t know y’all were from Canada doing the video. That’s a lot a money to spend on a recreational toy. That’s what we call them anyway. I’m getting to purchase a 850. List price $10999.
@@dnksdad that trudoe guy is a pee wee herman thats why. needs to be booted out. 19K FOK
Please send me a link where you can get a brand new xmr 850 for $11,000. 😂
The name of the company is Friendly Honda in Baton Rouge La. But I have to tell you, all the extra cost that’s added to the original price is crazy. They are starting to charge unboxing fee, delivery fee, and then you have to pay your tax, title, license. So now your out door price is around $14,500 - $15,000 depending on tax rate. Since Covid everything is high and hard to get.
How can you drive with those massive balls you have?
The reason it didn't fit right and was kinking is because you skipped a crucial step. You're supposed to cut the console support first and there's a template for it.
Yup
Can you post the links for both pieces please
I have a can AM 570 XMR with the 4.4 digital display. Will that work on mine?
Where did you order the exhaust from? Thanks
Atv tire nation in Kingston.
@@dnksdad thanks!
Good informative video, only thing I suggest is a wireless mic so we can hear you guys better 🤙 Also to keep people watching the video longer, cut any second where there isn’t talking or something that is going on, I do that with my brothers videos
Ordered a set of these from Dirty Life and they did not fit near as well as yours seem do. Large gaps, I've got to pull the front fenders in I'd say approximately a full inch to meet the foot well. Had to trim some of the steel away just so the fender would line up in the bend where the outer torx screws are. Not really happy with these foot well at all, but being a metal fabricator by trade I've made them work. I reached out to far mudding with my issues and never got a response. Won't be purchasing anything else from these people, wished I'd have bought the lucky 7's instead. Great video though hell of a machine love mine. Happy trails
LMAOO
First time using this method on such a small shock. Thanks for the tip on just hacking the hooks off the ratchet strap so it works better and safer. Thanks for the vid!
Glad it worked for you ! Thanks for watching
I’m looking to replace my Yoshimura with one of these. Is it annoying on the trails?
Well after an all day ride yes it's a bit much. It's loud, but at the same time sounds so good . I'd say go for it unless you always ride all day. Then just keep the yosh.
Looks good fellas. Nice that those tires are light.
Thank you ! Yes winter can't go away fast enough now . I can't wait to try them out ! Thanks for watching!
@Northern Ontario Trail Stompers I have different offset wheels. And my front tires still hit the fender. But you should be fine with stock wheels. Oil change is way easier with those floorboards too. I love mine.
I heard that. I'm looking forward to the next oil change. Before it was a real chore. I haven't even tried on my wife's two up. I sent it to the dealer. Such a pain in the ass lol
@Northern Ontario Trail Stompers I have trouble with the rear drive shaft coming loose. If you remove the side plate by the brake pedal you can really crank on the drive shaft bolt. Way better than trying to tighten it from underneath. Wish I knew I could have got them to Lazer my name in them. My wife stole the shirt that came with them. Lol.
All I hear is the guy holding the phone heavy breathing
We hear that too ! Mouth breathers lmao ! Problem has been noted and hopefully will be corrected in the next vid ! Thanks for watching !
Hey y’all. Just stumbled upon you guys, digging the videos and your casual attitudes. I subbed to the channel. Looking forward to the content! Howdy from South Texas🤘🏼
Thanks eh ! 😉
What skid plates are you guys using?
850 is all stock plastic, and the 1k has the brp aluminum skid plate set.
@@dnksdad are the brp skid plates any good because I'm waiting for my 2022 outlander and debating on which skid plates to get
They're definitely solid.
Where did you get the tires from?
L1fe outdoors. Bought them online and they shipped to me.
I don't believe it reny more than outlander. I just got 1000 xmr. Love my bike
Nice! Happy for you! My dream quad is a canam 570 xmr hopefully in 2-3 years or next year!
Nice color
Awesome video, bike is looking mint 👌
Thanks ! I'm definitely loving it !
Looks like a weapon now Jeremy! Trust me you can rip trails with these tires. I'm curious to see how they perform in the deep snow.
Me too, can't wait for next season to get some full on riding on them. I'm thinking once I get it clutched, we'll try some snow. We don't have much yet unfortunately. Thanks for watching! 👊