On Sean's DIY & Reviews we focus on technical reviews as well as household DIY projects. Sean is a father of 4 and pretty handy. He enjoys electronics and is an early adopter. Sean was an owner of the Palm smartphones and even Windows Phone. He has owned iPhones and loves the Galaxy Note series. I love anything techy and like sharing how things are done with others.
Do you have a product you want me to review? Let me know in the comments and I might do that. Questions on how to fix something? Happy to do that too.
Пікірлер
Great video, thanks! Does the black spacer part of the spindle that comes off(with the guard) go on top or on the bottom of the spindle? I guessed the top, and it is working so far but I can’t find a diagram. 3:46
Great video, thanks! Does the black spacer part of the spindle that comes off(with the guard) go on top or on the bottom of the spindle? I guessed the top, and it is working so far but I can’t find a diagram.
Bro,HElp me.Today I bought a anker p25i.But It doesn't have a padin in the lid of the case,and I didn't feel any difference between bass on and bass off.So,Did you feel any difference between bass on vs bass off ? and Do you think my one is original or fake ?
Mine doesn't have padding in the top of the case. Does it connect with the app?
Female here! & This is exactly what is going on w my car, wish me lucks!! Thank you for the upload ❤
These filter units are work horses. Built well, plenty of storage for bio media, pads are easily available. You can get creative with your filter media choices. I run carbon, additional bio media, Purigen, and even squeezed in another finer media pad cause Iam picky with my water conditions and I am fully stocked. I run two of these on my 150 gallon pond. Additional backup doesn’t hurt. The pumps that came with this kit are silent and easy to do maintenance on. Dent turn over rate . Very cost effective, little use of electricity and won’t empty your wallet.
Great job
14.5 hours in… love spending 4k to have to replace parts a few weeks later
Hes going to prepare an private military company called atlas in 2054.
🔌 💧 ⬇️
you did not show how you reset the watch. my watch is stuck on the same screen so the watch will not let me into the settings menu so where to go from here ?
All you can do is hold the two buttons for 15-30 seconds until it reboots. If it doesn't, out it on the charger for a while and try again. If that doesn't work, it's probably dead.
Man people spending lile 10 dollars on a tiny bit of varley straw when you can just pick some up from any farmer fke free is crazy
Will it charge without cleaning.
Will it charge series 7 without cleaning cartridge installed?
Bought a home with completely unmapped breaker box. Only could figure out washer/dryer. Didn't want one that trips your fuses. Thank you for this informational video!
I'm glad this was able to help you. I assume you now know what each breaker is for?
@@SeanDIY I am going to buy it tomorrow morning!
Most likely an exhaust leak around your cat. Exhaust flange gasket might be leaking throwing off your air fuel ratio sensor triggering that code.
Find it very weird they release a pen..with no replacement pen tips for sale in a 3 pack like they do with all the other pens they have. I don't know if any other tips will work since it's built very different than all the other pens, and nobody seems to mention this in reviews and I can't find any information online. I bought this pen online from someone and I love it so much but I'd like a new pack of tips. This is a huge shame and if I would've known you only get two tips I wouldn't have gotten this at all
Does this work with gfi outlets
I take those o rings off before I clean it off
That's a great idea
Ok, but what's the print quality like with fine detail in images on regular paper and cardstock?
Mine broke at 2 hours, thanks for the video!
Do you know which model challenger this is?? I got a 310 a few days ago, hence why im watching... but mine doesnt have slides ot a drivers door... lucky😅 but seriously, great content, thank you for educating!!
Damn man. I just hit exactly 7 hours on my Z330. I have the same 54” deck. Ive read a few post about regarding belt snapping.
Did your deck belt snap too? Fortunately I replaced it for $50 and I've made over $100 on this video, so I also got to help people. I'm at 34 hours now with no problems.
@@SeanDIY so far it’s holding. I took a look at it right after I saw your video and it looks ok but you never know. Glad you got it taken care of and it basically got paid for by you helping people out with this video. If mine craps out I’ll post it on this video with the specific hour of use.
Do you have a USB C charger for your car?
agree
Which printer do you have? Same issue?
@@SeanDIY Canon I Throwed It Out And Bought An HP Laserjet
If accept someones glympse can they then see my location?
I believe both can see each other's location.
I have same sound somewhere in front when start amd turning off the car
It could be a rattling exhaust.
I have the same scanner I got it for like 4 dollars in temu and it works good
That's crazy. I believe this is the one I got from Walmart for about $25.
@@SeanDIY yes but there’s an app you can get them cheaper than that
Hey are you able to show where the breather hoses connect? I disconnected mine and dont know where they connect. Theres 2 on back end of the engine and 1 bottom near passanger
I wish I could but I sold the vehicle. You cN probably find a schematic. I'd also check to see if the hoses fit in one orientation more than the other.
@@SeanDIY Thanks for responding so fast, sadly no luck with schematics for my exact model.
0:41
Thanks for watching. It's a shame this is still applicable years later.
1:22
Real good explanation for this job thanks 😊
Glad it was helpful! The new belt has lasted 30 hours so far.
Hello so that one can I recharge for LX 470?
It should do any car if done right.
I already replaced several belts and pulleys on my z330r. It a strong mower but it’s nickel and diming me
I replaced my belt at 7 hours, but so far, at 30 hours, it's running great.
Please suggest for me between p25i and r50i I terms of call clarity.
As I understand it, they are almost the same.
It is really easy to rinse out all the dirt in the bottom tank, and all the pieces that suction. The brush head is easily removable, I spray everything down with the showerhead jet, leave out to dry and wipe away any debris under the base before reassembling. Its nicely designed, does a great job cleaning and idiot-proof assembly
I like it, but I'm finding that the seals aren't the best after 3 years.
Does this work to find out the break on a dead outlet?
I think it can, but I can't recall.
Does it have multi point connection
Do you mean in the charger?
@@SeanDIY I mean, connect it to two device at a time
@godfreydaniel9833 here is what I found: "According to an Anker Soundcore P25i/P20i True Wireless review on rtings.com, the P25i headphones do not support multi-device pairing." When I need to use them on my computer, I turn off Bluetooth on my phone and then it only finds the computer.
mine doesn't have the lines in top left
This was from a few years ago, or thr iOS may have changed.
When are gonna show the next video of the watches??
My kids grew up, so they never needed the next ones. Here is a review of the Gizmo Watch 3, though. www.pcmag.com/reviews/verizon-gizmo-watch-3#:~:text=The%20Gizmo%20Watch%203%20relies,command%2C%20tap%2C%20or%20swipe.
It does work better than my UV but I put it into a secondary waterfall filter because it seems to need a flow of water.
That's good to know.
There's settings that can make it much faster, but it sacrifices quality. I've had that printer for over five years and it's been great aside from ink costs
Thanks for your feedback. It was so slow I couldn't bear it.
Hi Sean I saw your content which I liked very much. We can make this content more and I can help you in editing your short videos by uploading more short videos. are you interested?
Thank you. I appreciate it. At the moment, I'm not interested.
@@SeanDIY ooh thanks for your reply I am very happy to have talked to a KZreadr to whom I have subscribed
I will take a screenshot so I remember it
I'm glad.
Realme t100 or soundcore h50i. Quality sound? Thanks
These Soundcore earbuds work great. I haven't reviewed the ones you mentioned.
can you do the re learn process without having to clean the throttle body?
Yes, you can. Be sure not to touch the throttle body, or you can mess it up. I got a CEL after opening it manually to clean it.
@@SeanDIY thank you. i already took off the air tube but wasn’t able to get the butterfly to stay open so i just sprayed it and cleaned off the gunk on the outside. made a huge difference but im gonna take the whole thing off soon just gotta get a torque wrench to make sure i put it back right
Someone told me you get a helper who can step on the gas while the car is on but not started. Each time they step on the gas the butterfly will open and you fan clean inside carefully if you match the open/close rhythm.
@@SeanDIY yea i tried that but the only time it would open up would be for a second when ur pulling the key out of the ignition
I have 3 belts snap on John deers it's very common
Wow, that's crazy. That sounds like maybe it isn't on properly?
Thanks man, you made it very easy
I'm glad it helped. Did you replace your mower belt?
Mine never quite made it out of blue what's that mean?
Did it get cold? This will only work if you are low on refrigerant. If there is something else wrong with your system, it's like filling your tire with a nail in it.
@SeanDIY idk wasn't my car. I know something is wrong with ac though.
Never got cold. But yea I thought it might work. I get what you're saying
Hi can you help me to choose one between R50i and p25i? Thank you 🙏🏻
I don't have experience with the R50i, but you'll be happy with the p25i
Great video. Thanks Sean!
I'm glad it helped. I appreciate the support.
And uh yeah, want us to let you know if we would do it? Or maybe if we have done it before. I’m thinking I would do it sometime in the future, yeah.
Cool.
Great video! I bought some Evapo Rust from Harbor Freight to get rid of the rust inside my wheel barrow. They say you can reuse the liquid. Worked great but now I’ve got gallons of it inside my wheel barrow and now I’ve gotta find a way to transfer it back into the containers. This looks like it can do the trick. Now I just need to find a cheap hose that I can cut and insert a filter at the end that sucks the fluid out of the wheel barrow.