Hello, please tell me the dimensions of the CVX voice coil, the diameter of the wire and the height of the wire winding
@jamesfernandez98342 жыл бұрын
Sir what the no. Of magnit wire of cvx15?
@seandonnelly31502 жыл бұрын
Do they still make clutch parts for this
@rockypalacios24942 жыл бұрын
You should push the coil down and put some epoxy on the loose part of the coil and that way it won't rattle
@michaelerato23642 жыл бұрын
Ive killed 2 of these now on an 2009 250 watt kicker amp in a ported box
@nobadhabits2 жыл бұрын
Do you or anybody know how to perform the reacall procedure for in the transmission?
@twopersonswalksalone19682 жыл бұрын
I'm tr
@chrish47423 жыл бұрын
Do u know the specs of the voice coil by chance?
@whoismarkjones92832 жыл бұрын
2.58 just like L7s. Lord of Bass has them under L7/type R
@edwinroman40063 жыл бұрын
Q video tan malo el peor de yuotube🤮🤮🤮🤦♂️🤦♂️🤦♂️ termine con mareo
@DakuMeisterSA3 жыл бұрын
I have exactly same issue with a JBL GTO sub 👿
@felixmikkialmosttoasted39114 жыл бұрын
Good deal.
@ronarter51624 жыл бұрын
Please consider starting your video when you begin working on your project rather than pointing at what was done then not showing the reassembly. This is mostly a video of your hands and shop.
@michaelparsons31882 жыл бұрын
Well... i made other videos showing the issue and disassembly. And it was my first time trying to do KZread videos.
@joshholden8561 Жыл бұрын
@@michaelparsons3188 u did a great job I watched all the videos.
@truenorthmuskoka90774 жыл бұрын
I have the same bike as you. I was told this ATV does not use transmission fluid and the engine oil also serves as lubrication for the trani. Is this true?
@shawnmcclure72824 жыл бұрын
Thats how almost all atvs are
@seandonnelly31502 жыл бұрын
Its true for semi auto trans
@macho.30884 жыл бұрын
Is the coil for the L7 12 inch the same for cvr 12 inch?
@jaezynnotnl34734 жыл бұрын
"My pick tool" 😅🤣 "I picked n-word... Oops" omfg 💀
@donaldhicks52014 жыл бұрын
Nice work great trade...
@julesgrill24904 жыл бұрын
That wind interference just killed your quality of work performed in this video thanks but sorry dude
@speakerLab4 жыл бұрын
Good afternoon, can you tell me the parameters of the coil? wire dimiter, winding height and internal coil diameter.
@videossatisfactorios2395 жыл бұрын
Hi,👍✌ how about a friend, how did you focus the kicker subwoofer coil?
@jeyarajkichu157225 жыл бұрын
Did that fixed the issue brro??
@michaelparsons31883 жыл бұрын
Yes it did. Sub is still bumping to this day in my buddy's ride.
@MidnightPolaris8005 жыл бұрын
Wow only 5 hundred some miles...almost new
@Mikep10245 жыл бұрын
Yeah. Got it for a steal too. Ended up selling it for 2000
@shawnmcclure72824 жыл бұрын
@@Mikep1024 Thats cool! My dad traded his box truck he used for hom repair for a 2004 kodiak 450 4x4 and a dual axle trailer and also bought a 2001 expedition 425 4x4 for like 5 or 600 bucks off his friend
@twistedmistersartz6 жыл бұрын
So did it work??
@michaelparsons31882 жыл бұрын
Yes check my other videos
@Colinarch923006 жыл бұрын
I have the same issue with my 6.5s I’ve only had then for a month or so... really sucks kicker is one of my favorite brands.
@Mikep10246 жыл бұрын
Colin Archey well kicker was a great company once. American made and mostly hand made. I think back in the 2006 to 2010 time period they sold out and lost quality control and customer service. And manufactured in china and Japan. I mean kicker is now sold in Wal-Mart.... What does that tell you? Dont get me wrong....not bashing Wal-Mart because I do shop there. But its about money now. Not the "living loud" reputation alma gates gave them with here Kicker Branded Bronco that had 20000 watts of power on over 20 L7 subwoofers. Back when they were built strong to last. Now L5s and L7s constantly have issues with the tinsel leads. People throw them out thinking they are blown... But the tinsel leads just wear out were they connect to the cone or the terminal from over excursion. A simple $2 fix
@johnb91876 жыл бұрын
good job mike. too many youtube videos of morons purposely destroying speakers due to a simple rattle or rub where an hour or two of labor can have it up and running like new again.
@beng56806 жыл бұрын
Did your Kicker repair last? If so can I have the name of the epoxy that you used on the coil windings please because I have a pair of older model L7 solobarics with the same symptoms. Thanks by the way for posting these vids because I was really on the fence about attempting to salvage my subs, I appreciate your insight!
@Mikep10246 жыл бұрын
Ben G yes to this day my buddy is still banging these subs. No rattle at all. The adhesives I used where BIG QwixTer on the coil which is clear and applied with an acid brush. The other to reglue the spider and surround was Panel Bonder. Both were from CrestAuto.com which sells body shop supplies
@yodawg42426 жыл бұрын
This guy deserves more subs
@williamnixon40566 жыл бұрын
HOW ON EARTH DID YOU REMOVE THE SPIDER WITHOUT DAMAGING???
@Mikep10246 жыл бұрын
William Nixon if you check out the other videos you will see I carefully pried the spider off the basket using a 90° pick tool. I poked into the glue and slid the angled part under the spider. Than I proceeded to pry it slightly a bot at a time as I went in a circle and also desoldiered the tinsel leads
@williamnixon40566 жыл бұрын
Mikep1024 much appreciated.
@farisziyad75387 жыл бұрын
I don't know if you still look at these comments, but I tested my sub with a multimeter and it gave me good ratings, but when i press on the cone, the coil feels frozen and won't give in at all. Is there a reason for this?
@Mikep10246 жыл бұрын
Faris Ziyad well there could be several possibilities. Sorry I just saw I had Your comment. One possibility is the coil got hot and expanded, another is the coil some other part of the motor assembly shifted and is no longer in alignment. Ive taken subs apart and found the coil former bent from too much excursion and causing the speaker to bind up. You wont really know till you tear it apart
@whoismarkjones92832 жыл бұрын
Your magnet is shifted. You need to tear down the same way and play hell straightening the magnet(look up motor shift fix). The magnets glue has worn out and smacked to one side, pinching the coil. You can hit the magnet side to side with a mallet and you will get some cone movent. If you force it out without doing that, you will skin the coil.
@calholli7 жыл бұрын
I still have my solo baric L7 square 12 that I bought in '99... they used to be badass back in the day.. the company I mean.
@Mikep10247 жыл бұрын
calholli yes they were. everybody wanted kicker L5 or L7 but they were like 300 per subwoofer.
@elreks17 жыл бұрын
Feed it 1700 rms at 2ohms instead of 4 (;
@myparakeets62367 жыл бұрын
where did you get recone kit
@Mikep10247 жыл бұрын
berenice Fuentes I did not get a recone kit. I took the original cone and coil assembly out of the basket and reinstalled
@elreks17 жыл бұрын
Lol the New Comp Q And L7s slap
@Mikep10247 жыл бұрын
Baby Gotenks ok?
@elreks17 жыл бұрын
Okay what? Kicker is still a decent brand why do people hate it so much
@Mikep10247 жыл бұрын
Baby Gotenks I'm not hating on kicker, I was simply stating that the quality has gone down since leaving still water designs. I hear plenty of kicker systems that sound good. compare these to the older solobarics and the old ones would last longer. not debating and not hating. simply voicing my opinion and stating facts
@elreks17 жыл бұрын
I didn't say you were hating I just asked
@myparakeets62367 жыл бұрын
where can i get recone kit for cvx 12 dual 4 ohm
@jamest.50017 жыл бұрын
I wish they would remake the old gold letter or the comps from the 90's but upgraded. bugger motor, magnet and coil. with a lil more excursion. that would be awesome. with a RMS of 1200-2400 watts. I may start looking for dome old kicker cones and good motor and basket. and build a hybrid kicker.
@SubwooferKing1008 жыл бұрын
Their are a lot better subs in that price range like the Fi audio BL or the Soundqubed HDC3 with a 3inch voice coil and a big triple stacked magnet that's hand build in America
@Mikep10247 жыл бұрын
Subwoofer King your point? these woofers I got for free.. fixed one... and sold them for $150.
@mauserk98bnz448 жыл бұрын
I just bought a 79 same original color what is it called because I want to keep it?? Thanks and awesome looking firebird
@Mikep10248 жыл бұрын
it is called dark carmine red. I will see if I can get the actual paint code for you. I have it at work but I'm currently out from an injury
@mauserk98bnz448 жыл бұрын
+Mikep1024 that would be great. I'm new to firebirds what would be the proper color for the bird on the hood? Again thank you and wish you a speedy recovery.
@Mikep10248 жыл бұрын
+mauserk98bnz44 also looked up code. the paint code is 71, however the color chip for the DuPont paint I sprayed was wa7072. this car was primed with evercoat hi build epoxy primer, then primed with DuPont 2k filler primer, DuPont vs7 sealer with flex additive, 4 coats DuPont wa7072 basecoat, and 3 coats DuPont 74500s clear coat activated and reduced with normal temp at 2:1:1 ratio.
@mauserk98bnz448 жыл бұрын
+Mikep1024 thanks for the tips here I will show this to the body shop who will be doing the work.
@Mikep10248 жыл бұрын
No problem. Check out my other videos on the progress getting it to this point. Don't forget to like.
@donpepejvb758 жыл бұрын
how high of temperature can the glue you use handle? and where can I buy some .
@Mikep10248 жыл бұрын
this stuff dries hard as a rock. you would literally need a torch to melt it off. both the epoxy on the coil and the panel bonder to put it back together are both from crest industries.
@donpepejvb758 жыл бұрын
did you wind the coil or did you just add glue to it .
@Mikep10248 жыл бұрын
just added epoxy. the cool was still reading acurate just some windings loosened. still bumps hard to this day in my buddies car on a kicker kx2500
@SubwooferKing1008 жыл бұрын
What size is the voice coil? 2.5inch or 3inch?
@Mikep10248 жыл бұрын
it's was like 2.85
@jahosaphet058 жыл бұрын
this is considered a 2.58 actully. it goes by id
@Mikep10248 жыл бұрын
Typed backwards my bad
@jahosaphet058 жыл бұрын
yep. rebuild alot of these
@jesus214sanchez97 жыл бұрын
jahosaphet05 where do you get the rebuild kits??
@jonathanjms298 жыл бұрын
hola yo tengo esas bocinas y quisiera saber donde puedo conseguir remplazo de piezas
@DJTrapillac9 жыл бұрын
what kind of power amp do you think would go good with those? i have some like that i wanna to use for djing
@Mikep10249 жыл бұрын
I was using a kenwood 2000 watt amp in this video but it's been a while so I am not sure of the model. I also previously used a pyramid 2600 watt power amp that suprisingly for the brand was plenty of power. I used that pyramid for DJing with other pro studio speakers and was a nice combo
@DJTrapillac9 жыл бұрын
Mikep1024 thanks man just bought a power amp. hey how much you think worth ? mine were given to me
@Mikep10249 жыл бұрын
JOE I ended up selling these for right around $200. But I had also upgraded with woofers and I installed good quality cross overs
@Mikep10249 жыл бұрын
these speakers did not come with a model number. I found out that these where actually very cheap speakers. not a whole lot of value just more of a bang for your buck.
@ter19711 жыл бұрын
hey sir i have a speaker just like yours and my model number and serial number is missing can you please tell me what your serial number is and model number is on yours please i need your help
Пікірлер
Hello, please tell me the dimensions of the CVX voice coil, the diameter of the wire and the height of the wire winding
Sir what the no. Of magnit wire of cvx15?
Do they still make clutch parts for this
You should push the coil down and put some epoxy on the loose part of the coil and that way it won't rattle
Ive killed 2 of these now on an 2009 250 watt kicker amp in a ported box
Do you or anybody know how to perform the reacall procedure for in the transmission?
I'm tr
Do u know the specs of the voice coil by chance?
2.58 just like L7s. Lord of Bass has them under L7/type R
Q video tan malo el peor de yuotube🤮🤮🤮🤦♂️🤦♂️🤦♂️ termine con mareo
I have exactly same issue with a JBL GTO sub 👿
Good deal.
Please consider starting your video when you begin working on your project rather than pointing at what was done then not showing the reassembly. This is mostly a video of your hands and shop.
Well... i made other videos showing the issue and disassembly. And it was my first time trying to do KZread videos.
@@michaelparsons3188 u did a great job I watched all the videos.
I have the same bike as you. I was told this ATV does not use transmission fluid and the engine oil also serves as lubrication for the trani. Is this true?
Thats how almost all atvs are
Its true for semi auto trans
Is the coil for the L7 12 inch the same for cvr 12 inch?
"My pick tool" 😅🤣 "I picked n-word... Oops" omfg 💀
Nice work great trade...
That wind interference just killed your quality of work performed in this video thanks but sorry dude
Good afternoon, can you tell me the parameters of the coil? wire dimiter, winding height and internal coil diameter.
Hi,👍✌ how about a friend, how did you focus the kicker subwoofer coil?
Did that fixed the issue brro??
Yes it did. Sub is still bumping to this day in my buddy's ride.
Wow only 5 hundred some miles...almost new
Yeah. Got it for a steal too. Ended up selling it for 2000
@@Mikep1024 Thats cool! My dad traded his box truck he used for hom repair for a 2004 kodiak 450 4x4 and a dual axle trailer and also bought a 2001 expedition 425 4x4 for like 5 or 600 bucks off his friend
So did it work??
Yes check my other videos
I have the same issue with my 6.5s I’ve only had then for a month or so... really sucks kicker is one of my favorite brands.
Colin Archey well kicker was a great company once. American made and mostly hand made. I think back in the 2006 to 2010 time period they sold out and lost quality control and customer service. And manufactured in china and Japan. I mean kicker is now sold in Wal-Mart.... What does that tell you? Dont get me wrong....not bashing Wal-Mart because I do shop there. But its about money now. Not the "living loud" reputation alma gates gave them with here Kicker Branded Bronco that had 20000 watts of power on over 20 L7 subwoofers. Back when they were built strong to last. Now L5s and L7s constantly have issues with the tinsel leads. People throw them out thinking they are blown... But the tinsel leads just wear out were they connect to the cone or the terminal from over excursion. A simple $2 fix
good job mike. too many youtube videos of morons purposely destroying speakers due to a simple rattle or rub where an hour or two of labor can have it up and running like new again.
Did your Kicker repair last? If so can I have the name of the epoxy that you used on the coil windings please because I have a pair of older model L7 solobarics with the same symptoms. Thanks by the way for posting these vids because I was really on the fence about attempting to salvage my subs, I appreciate your insight!
Ben G yes to this day my buddy is still banging these subs. No rattle at all. The adhesives I used where BIG QwixTer on the coil which is clear and applied with an acid brush. The other to reglue the spider and surround was Panel Bonder. Both were from CrestAuto.com which sells body shop supplies
This guy deserves more subs
HOW ON EARTH DID YOU REMOVE THE SPIDER WITHOUT DAMAGING???
William Nixon if you check out the other videos you will see I carefully pried the spider off the basket using a 90° pick tool. I poked into the glue and slid the angled part under the spider. Than I proceeded to pry it slightly a bot at a time as I went in a circle and also desoldiered the tinsel leads
Mikep1024 much appreciated.
I don't know if you still look at these comments, but I tested my sub with a multimeter and it gave me good ratings, but when i press on the cone, the coil feels frozen and won't give in at all. Is there a reason for this?
Faris Ziyad well there could be several possibilities. Sorry I just saw I had Your comment. One possibility is the coil got hot and expanded, another is the coil some other part of the motor assembly shifted and is no longer in alignment. Ive taken subs apart and found the coil former bent from too much excursion and causing the speaker to bind up. You wont really know till you tear it apart
Your magnet is shifted. You need to tear down the same way and play hell straightening the magnet(look up motor shift fix). The magnets glue has worn out and smacked to one side, pinching the coil. You can hit the magnet side to side with a mallet and you will get some cone movent. If you force it out without doing that, you will skin the coil.
I still have my solo baric L7 square 12 that I bought in '99... they used to be badass back in the day.. the company I mean.
calholli yes they were. everybody wanted kicker L5 or L7 but they were like 300 per subwoofer.
Feed it 1700 rms at 2ohms instead of 4 (;
where did you get recone kit
berenice Fuentes I did not get a recone kit. I took the original cone and coil assembly out of the basket and reinstalled
Lol the New Comp Q And L7s slap
Baby Gotenks ok?
Okay what? Kicker is still a decent brand why do people hate it so much
Baby Gotenks I'm not hating on kicker, I was simply stating that the quality has gone down since leaving still water designs. I hear plenty of kicker systems that sound good. compare these to the older solobarics and the old ones would last longer. not debating and not hating. simply voicing my opinion and stating facts
I didn't say you were hating I just asked
where can i get recone kit for cvx 12 dual 4 ohm
I wish they would remake the old gold letter or the comps from the 90's but upgraded. bugger motor, magnet and coil. with a lil more excursion. that would be awesome. with a RMS of 1200-2400 watts. I may start looking for dome old kicker cones and good motor and basket. and build a hybrid kicker.
Their are a lot better subs in that price range like the Fi audio BL or the Soundqubed HDC3 with a 3inch voice coil and a big triple stacked magnet that's hand build in America
Subwoofer King your point? these woofers I got for free.. fixed one... and sold them for $150.
I just bought a 79 same original color what is it called because I want to keep it?? Thanks and awesome looking firebird
it is called dark carmine red. I will see if I can get the actual paint code for you. I have it at work but I'm currently out from an injury
+Mikep1024 that would be great. I'm new to firebirds what would be the proper color for the bird on the hood? Again thank you and wish you a speedy recovery.
+mauserk98bnz44 also looked up code. the paint code is 71, however the color chip for the DuPont paint I sprayed was wa7072. this car was primed with evercoat hi build epoxy primer, then primed with DuPont 2k filler primer, DuPont vs7 sealer with flex additive, 4 coats DuPont wa7072 basecoat, and 3 coats DuPont 74500s clear coat activated and reduced with normal temp at 2:1:1 ratio.
+Mikep1024 thanks for the tips here I will show this to the body shop who will be doing the work.
No problem. Check out my other videos on the progress getting it to this point. Don't forget to like.
how high of temperature can the glue you use handle? and where can I buy some .
this stuff dries hard as a rock. you would literally need a torch to melt it off. both the epoxy on the coil and the panel bonder to put it back together are both from crest industries.
did you wind the coil or did you just add glue to it .
just added epoxy. the cool was still reading acurate just some windings loosened. still bumps hard to this day in my buddies car on a kicker kx2500
What size is the voice coil? 2.5inch or 3inch?
it's was like 2.85
this is considered a 2.58 actully. it goes by id
Typed backwards my bad
yep. rebuild alot of these
jahosaphet05 where do you get the rebuild kits??
hola yo tengo esas bocinas y quisiera saber donde puedo conseguir remplazo de piezas
what kind of power amp do you think would go good with those? i have some like that i wanna to use for djing
I was using a kenwood 2000 watt amp in this video but it's been a while so I am not sure of the model. I also previously used a pyramid 2600 watt power amp that suprisingly for the brand was plenty of power. I used that pyramid for DJing with other pro studio speakers and was a nice combo
Mikep1024 thanks man just bought a power amp. hey how much you think worth ? mine were given to me
JOE I ended up selling these for right around $200. But I had also upgraded with woofers and I installed good quality cross overs
these speakers did not come with a model number. I found out that these where actually very cheap speakers. not a whole lot of value just more of a bang for your buck.
hey sir i have a speaker just like yours and my model number and serial number is missing can you please tell me what your serial number is and model number is on yours please i need your help