Пікірлер

  • @albertwoodeasy9021
    @albertwoodeasy90218 сағат бұрын

    Awesome did u deflate the rear?

  • @Forever1wheel
    @Forever1wheel7 сағат бұрын

    @@albertwoodeasy9021 i did not maybe i should though if it helps

  • @albertwoodeasy9021
    @albertwoodeasy90218 сағат бұрын

    Awesome.. did u deflate the rear tire for this?

  • @albertwoodeasy9021
    @albertwoodeasy902112 сағат бұрын

    Super cool setup you have. Would it be the same, crutch up + throttle on a softail streetbob to get ut up?

  • @Forever1wheel
    @Forever1wheel12 сағат бұрын

    @@albertwoodeasy9021 thanks man and yea its pretty much the same more or less to wheelie all harleys some might be harder than other ect

  • @nen9
    @nen9Күн бұрын

    i think when it shut off maybe you tripped the tip sensor? idk if that year has one

  • @Forever1wheel
    @Forever1wheelКүн бұрын

    @@nen9 could be right it definitely has it in thought maybe the stator might be going haha

  • @farkutz
    @farkutzКүн бұрын

    I want to try to wheelie a bagger lmao

  • @Forever1wheel
    @Forever1wheelКүн бұрын

    @@farkutz get it goin lets goooooo 🙌🏽

  • @ispintires
    @ispintires3 күн бұрын

    max deadlift, roadglide lmfao

  • @Forever1wheel
    @Forever1wheel3 күн бұрын

    @@ispintires 🤣🤣🤣

  • @theboochiestore
    @theboochiestore3 күн бұрын

    big bad bagger boy

  • @chin0c0chin06
    @chin0c0chin063 күн бұрын

    #LongLivetheDYNA

  • @Forever1wheel
    @Forever1wheel3 күн бұрын

    Shes still my main girl

  • @willlachlan3333
    @willlachlan33334 күн бұрын

    Block

  • @Forever1wheel
    @Forever1wheel4 күн бұрын

    😂😂😂

  • @alexpalmer9941
    @alexpalmer99415 күн бұрын

    Nice bike! What step plate are you using on the rear fender?

  • @Forever1wheel
    @Forever1wheel5 күн бұрын

    @@alexpalmer9941 thanks man its actually a homemade one i made a while back in the machine shop

  • @Parma.sean.16
    @Parma.sean.167 күн бұрын

    So sick dude

  • @Forever1wheel
    @Forever1wheel7 күн бұрын

    Thanks man appreciate the support 🙏🏽

  • @tyenan
    @tyenan8 күн бұрын

    GANG

  • @ajskustom
    @ajskustom9 күн бұрын

    Damn nice bike

  • @johnNYrocket3149
    @johnNYrocket314910 күн бұрын

    Do you have a video of mounting that coil? I got one with my twin tec and it’s just sitting

  • @Forever1wheel
    @Forever1wheel10 күн бұрын

    @@johnNYrocket3149 if u follow me on instagram i can send ya it i made an aluminum bracket to mount it

  • @johnNYrocket3149
    @johnNYrocket31499 күн бұрын

    @@Forever1wheel oh man if I had Instagram I would lol

  • @Roadmenace818
    @Roadmenace81810 күн бұрын

    This the same mod for m8 also I would imagine its close

  • @Forever1wheel
    @Forever1wheel10 күн бұрын

    @@Roadmenace818 im not sure too be honest brother but i would imagine its similar as well

  • @ispintires
    @ispintires11 күн бұрын

    lets goo

  • @Forever1wheel
    @Forever1wheel11 күн бұрын

    @@ispintires good to see a homie in the comments 🤘🏽👊🏽

  • @theboochiestore
    @theboochiestore11 күн бұрын

    fuck yeah that’s huge

  • @Forever1wheel
    @Forever1wheel11 күн бұрын

    @@theboochiestore im stoked!

  • @ajskustom
    @ajskustom11 күн бұрын

    I think I'm going to finish my old FXE super glide bike and give it to my Daughter for her first street bike and I'm done I need to build myself a 3 wheeler if I lay one down I would have to get help from people who around me to help me get up off the ground and help me get the bike off the ground and I don't want to be that guy. And I was not going to say anything for fear I might seem like I don't know what I'm even talking about but here it goes you let me know later if what I was thinking maybe this bike might be a lil harder to pull a wheel stand with then the dyna but it's a nice geezer glide just seems to me like its going to be a lil harder to get the front end up I wonder how close the weight difference is between the 2 but it looks a lot heavier then the dyna to me any way.

  • @Forever1wheel
    @Forever1wheel11 күн бұрын

    @@ajskustom i will definitely let ya know how difficult it is compared to the dyna!

  • @ajskustom
    @ajskustom11 күн бұрын

    @@Forever1wheel im suposto be getting anothr bike here soon i hope its a evo too

  • @Clutch_Kick187
    @Clutch_Kick18710 күн бұрын

    Its not hard with a good clutch and a seat bounce.. I have a 2010 st glide and its simple.. Mine only makes 98whp.. from a cam & exhaust.. It will easily wheelie in 1st or 2nd.. and will in 3rd if you put a foot on the back.. You must have a good shinko or sticky tire though.. And good front forks, cuz stockers will not handle more than a few that aren't slow chasing drop..

  • @rubenvillalobos333
    @rubenvillalobos33312 күн бұрын

    Clean 🧼

  • @Forever1wheel
    @Forever1wheel12 күн бұрын

    @@rubenvillalobos333 appreciate it hopefully stays that way haha

  • @shannmee9892
    @shannmee989212 күн бұрын

    You are doing AWSOME! keep on keeping on and or up...

  • @Forever1wheel
    @Forever1wheel12 күн бұрын

    @@shannmee9892 thanks for the positivity! Trying to my best haha definitely a mental battle

  • @jessek3231
    @jessek323112 күн бұрын

    I got the same exhaust. And 6.5 pull backs on a 07

  • @Forever1wheel
    @Forever1wheel12 күн бұрын

    @@jessek3231 right on man probably looks super clean 🤘🏽

  • @themetaphysicalaxe5506
    @themetaphysicalaxe550612 күн бұрын

    Looks great man, love that color.

  • @Forever1wheel
    @Forever1wheel12 күн бұрын

    @@themetaphysicalaxe5506 thanks man that was one of the selling points for me !

  • @purelyfixedyyc4039
    @purelyfixedyyc403912 күн бұрын

    Man that color blue is something special. Is that a one-off color?

  • @Forever1wheel
    @Forever1wheel12 күн бұрын

    @@purelyfixedyyc4039 thanks man its the screaming eagle edition i think they only had 3 color ways this blue a red and a grey the red and the blue look the coolest in my opinion

  • @purelyfixedyyc4039
    @purelyfixedyyc403912 күн бұрын

    @@Forever1wheel it's really nice. 👍👍

  • @MrRunWO
    @MrRunWO13 күн бұрын

    What the height of the bar and riser combo

  • @Forever1wheel
    @Forever1wheel12 күн бұрын

    @@MrRunWO 3.5” ODI podium vtwin bar and original garage moto 6.5” tall risers with pullback

  • @cloutdoors5674
    @cloutdoors567413 күн бұрын

    Did you do the oil pan mod?

  • @Forever1wheel
    @Forever1wheel13 күн бұрын

    @@cloutdoors5674 yup make sure u do that

  • @FabianFR757
    @FabianFR75718 күн бұрын

    What bike ist it?

  • @Forever1wheel
    @Forever1wheel18 күн бұрын

    @@FabianFR757 harley davidson dyna 2007

  • @Elevenstuntz
    @Elevenstuntz18 күн бұрын

    One thing I did notice tho is that your trying to drop back when your at balance point and going slow you gotta chase the wheelie a little bit to drop back because dropping back is gonna slow you down a lot and you need speed to lose when dropping back

  • @Forever1wheel
    @Forever1wheel18 күн бұрын

    @@Elevenstuntz word that makes sense ill try n go fast next sesh just feels like il loop out

  • @Elevenstuntz
    @Elevenstuntz18 күн бұрын

    We have 2 differnt bikes and gearing but Harley’s are so much engine break compared to a sports bike it takes a lot less rear break to drop back them a sports bike but I would start with just slightly riding the break once you start getting back there

  • @Forever1wheel
    @Forever1wheel18 күн бұрын

    @@Elevenstuntz appreciate the tips man !

  • @ajskustom
    @ajskustom18 күн бұрын

    I noticed a lot of guys use a second break leaver on the clutch side too I would want that if I was to try this.

  • @Forever1wheel
    @Forever1wheel18 күн бұрын

    @@ajskustom definitely but in my opinion learning rear brake on the foot is the most superior way and most skill based that allows your hands to be free for other tricks when u learn to drop back

  • @ajskustom
    @ajskustom18 күн бұрын

    @@Forever1wheel tru dat

  • @Elevenstuntz
    @Elevenstuntz18 күн бұрын

    @@Forever1wheelrear break first 100 percent sit down for me is so easy to drop back in

  • @ghosty500r
    @ghosty500r22 күн бұрын

    this is the first vid of yours and from the maximum tool i know your from canada. lol what part you in?

  • @Forever1wheel
    @Forever1wheel22 күн бұрын

    @@ghosty500r GTA

  • @freddyg6940
    @freddyg694023 күн бұрын

    Would this work on a 103 Twin cam?

  • @Forever1wheel
    @Forever1wheel23 күн бұрын

    @@freddyg6940 im certain u can convert all twin cams

  • @Chicago_GTA
    @Chicago_GTAАй бұрын

    Rsc for life they are the original and everyone else just copied . Nice build , bro

  • @Forever1wheel
    @Forever1wheelАй бұрын

    @@Chicago_GTA copped one for my glide 💪🏽 thx G

  • @DRAEB1045
    @DRAEB1045Ай бұрын

    I just bought an 01 as well. Been looking for this video for months. Let the games begin. Thank you

  • @Forever1wheel
    @Forever1wheelАй бұрын

    Glad to help 🙏🏽🤘🏽💪🏽💪🏽 good luck on the build

  • @hgungunguun5065
    @hgungunguun5065Ай бұрын

    CVcarb doesn't need any processing, right?

  • @Forever1wheel
    @Forever1wheelАй бұрын

    I believe its the same i could be wrong though

  • @rubenvillalobos333
    @rubenvillalobos333Ай бұрын

    🥷

  • @SoyismaAlgunPedo
    @SoyismaAlgunPedoАй бұрын

    man your video is all about the exaust and you dont even show how it sounds haha

  • @Forever1wheel
    @Forever1wheelАй бұрын

    Haha yea its still under construction couldn’t start it yet when im all finished il throw up a video

  • @toddchoops2488
    @toddchoops2488Ай бұрын

    Your mic sucks

  • @ajskustom
    @ajskustomАй бұрын

    did you ever consider inverted front forks ? IDK but I heard that that is the way to go you got a nice dyna I have a old 1976 super glide and I just don't think I want to beat on it that hard I want a bike like yours someday.

  • @Forever1wheel
    @Forever1wheelАй бұрын

    Hey man thanks for the compliments on my ride its appreciated! Inverted forks are definitely top tier in my opinion in comparison to harley front ends but just not in the budget for me maybe one day though! And forsure you should definitely stick to whatever your goals are with your bike if you dont feel like thrashin it with stunts thats all good ! Build a nice cruisin bike and maybe down the road u could build something on the side u can mess around with!

  • @ajskustom
    @ajskustomАй бұрын

    @@Forever1wheel Right on man keep on doing what you do and I'll keep watching.

  • @Forever1wheel
    @Forever1wheelАй бұрын

    @@ajskustom thanks for the support 🙏🏽

  • @Chicago_GTA
    @Chicago_GTAАй бұрын

    🦑

  • @gaborsaska8401
    @gaborsaska8401Ай бұрын

    What is your bike Year?This is Low rider s?

  • @gaborsaska8401
    @gaborsaska8401Ай бұрын

    Ok got it.

  • @Forever1wheel
    @Forever1wheelАй бұрын

    2007 dyna lowrider

  • @theboochiestore
    @theboochiestoreАй бұрын

    bike looks good af

  • @AckAcks
    @AckAcksАй бұрын

    I'm interested in learning how to wheelie, I have a cruiser to, what gear are you in when you pull it up? Should I be in 2nd?

  • @Forever1wheel
    @Forever1wheelАй бұрын

    Generally on most Harleys its 1st gear clutch up, but it also depends what cruiser you have and if it is set up to do wheelies if youre interested in learning tho id recommend buying a honda grom or a 110 pit bike to get the feel for it so you dont damage your main bike in case of a mishap

  • @Juanmorsay7894
    @Juanmorsay7894Ай бұрын

    Can we all just quit doin this kinda stoooopid sht?

  • @alistairdick5040
    @alistairdick5040Ай бұрын

    Haha not even close

  • @ncsbg21
    @ncsbg21Ай бұрын

    hell yeah 🤘🏼

  • @tyenan
    @tyenanАй бұрын

    gangster

  • @astralis2194
    @astralis2194Ай бұрын

    nice lot. i like those turn signal switches, did you just by the drag specialties switch and cut off the rest of the mounting bracket?

  • @Forever1wheel
    @Forever1wheelАй бұрын

    Thanks! And Yea just basically took the housing off its ghetto rigged right now but il be deleting all the controls soon for a cleaner look 👊🏽

  • @astralis2194
    @astralis2194Ай бұрын

    @@Forever1wheel are you gonna keep your turn signals or delete those too? where is your starter switch and etc? I'm trying to think thru how to clean up my bars but I still want to keep my turn signals

  • @Forever1wheel
    @Forever1wheelАй бұрын

    @@astralis2194you can buy smaller buttons n run those to get rid of the housing ect but its alot of wiring i have a push start on my bike that’s on the starter and im probably going to delete turn signals

  • @crust616
    @crust616Ай бұрын

    I'm rebuilding my FXR with a TC touring motor and touring swingarm. Going to let it be EFI and get the full fairing with the lowers and good bags. Set up for eating miles not stunt.

  • @crust616
    @crust616Ай бұрын

    I'm happy with Bitubo's rear shocks.

  • @Forever1wheel
    @Forever1wheelАй бұрын

    Heard good things about them!

  • @crust616
    @crust616Ай бұрын

    So much space for activities !

  • @Forever1wheel
    @Forever1wheelАй бұрын

    I know i was pumped well see how long this location lasts though haha