Пікірлер

• 
  @michaelmike88554 ай бұрын

  That;s pretty fast for an e36 328i .

• 
  @Merc-Rover7 ай бұрын

  I have a Dominator exhaust on my Dakar and I had to modify the DB killer as it was way too loud!!!

• 
  @oscaravendano93329 ай бұрын

  I found one need a bit of work for 350$ what yall think

• 
  @gwoztom10 ай бұрын

  Without db killer?

• 
  @jacobcreach11 ай бұрын

  Did you rejet or tune the carbs?

• 
  @bimmere36classic9411 ай бұрын

  Yes rejet.

• 
  @Kriszx6 Жыл бұрын

  Hello friend! I have the exact same bike as yours, and plan to replace the original exhaust with the same dominator that's on yours. Did you have to readjust the carburettors after installing the exhaust?

• 
  @bimmere36classic94 Жыл бұрын

  Hi Is not 100% necesary you can run without rejet but will run a bit rich. But if you change the jets on carburator you will gane 10% more power and smoother engine. I bought my carbs kit from Ard from Bmw f650 funduro group on facebook. He will explain what you need And is not too expensive.

• 
  @Kriszx6 Жыл бұрын

  I'm in the group too, so I'll try to find him when the time comes for the mods. Thank you for your help!

• 
  @LosSerpent Жыл бұрын

  nice VR mod. what's that cilinder thing? tool box? was looking to do a similar thing on my bike, mind sharing the pics?

• 
  @bimmere36classic94 Жыл бұрын

  It's a eBay tool box Verry hamdy to carry few emergency tools

• 
  @jorgemedina9226 Жыл бұрын

  cuentame que escape o silenciador le colocastes me encanto

• 
  @SGDB905 Жыл бұрын

  It's a dominator exaust l have it on my dr 800 big but just so you know they are not street legal if you need to pass inspection on your bike it might fail and if you get stopt by police they might fine you

• 
  @vucci83782 жыл бұрын

  anything else done

• 
  @bimmere36classic942 жыл бұрын

  I have done some weight reduction Pulls harder on rolling road. But feel almost the same like in video from stand still. I haven't rove it last 2 years as the number plate expires. But i will keep the car as a donor in future.

• 
  @vucci83782 жыл бұрын

  @@bimmere36classic94 still my dream car this is my goal e36 328 I sedan 5 sec car

• 
  @gashandel2 жыл бұрын

  Hello I see that the rear fender is gone on your newer vids, that looks way better, Did you just cut the fender of? And how did you ad the frond fender (dirtbike look) on?

• 
  @bimmere36classic947 ай бұрын

  Hi Yes i cut it so it's smaller. Plus other mods It's way lighter now Rear f650gs wilbers shock absorber . Better off road

• 
  @bimmere36classic947 ай бұрын

  And front fender is eady to add . Just 4 bolts on the plastic under the horn .

• 
  @fido3382 жыл бұрын

  Zapraszam posłuchać mojego BMW f650 st. Jak zrobi się trochę cieplej, to to przetestuję go na drodze.

• 
  @Paja01132 жыл бұрын

  ok thank you for the sample. I will definitely keep the original exhaust!

• 
  @xupitera65802 жыл бұрын

  What dominator ? Link ? Thare 2 type's

• 
  @DutchAce2 жыл бұрын

  Attantion seeker

• 
  @macieknowy57123 жыл бұрын

  nice sound :) could you send me a photos how you install this exhaust?

• 
  @bimmere36classic943 жыл бұрын

  Hi It's just a dominator exhaust and link pipe. Made in Poland

• 
  @macieknowy57123 жыл бұрын

  Nice sound😁 could you send me pictures how you install this exhaust?

• 
  @bimmere36classic943 жыл бұрын

  It's quite strait forward to instal it. Verry easy.. Make sure you have the link pipe also, and aply some exhaust paste at joints.

• 
  @tinuse36703 жыл бұрын

  Dude...how is that done? You have to have upgrades no way a stock 193 hp will launch that rapid

• 
  @bimmere36classic943 жыл бұрын

  Engine bone stock I think ecu was remapped on this video(generic remap noting fancy). Polished throttle body and k&n filter. Cdv delete. Cats still on car(next to be removed). And will follow weight reduction ..thanks.

• 
  @tinuse36703 жыл бұрын

  @@bimmere36classic94 i just finished my m50 conversion. But it doesn’t go any quicker than 7.4 seconds to 100kmh

• 
  @tinuse36703 жыл бұрын

  Maybe mine has issues with the fuel pressure or something like that

• 
  @bimmere36classic943 жыл бұрын

  @@tinuse3670 My intake is stock. I heard that you loose low torque with M50 one ..so i keept mine on. Is it yours 2.8i Make sure your camshaft and crankshaft sensors are good. And give her a good service . Also injectors need cleaning sometimes..done it on mine and helped a lot.

• 
  @tinuse36703 жыл бұрын

  @@bimmere36classic94 most of it is kept up very well. I put the 2.8 in last summer. It has low miles and runs smoothly. Maybe I will figure it out maybe not...Oh well what can you do. Mine is slow but I still love my e36.

• 
  @dannyr29764 жыл бұрын

  Stunning colour, and certainly looks better outside of a studio. Every time I see it, I'm always thrown by those rear end proportions.

• 
  @arkk12314 жыл бұрын

  no more job cut, MCL :-$

• 
  @ddaagahdaniel96824 жыл бұрын

  De

• 
  @luckvoltia73164 жыл бұрын

  That spec is absolutely insane

• 
  @doctornick9994 жыл бұрын

  One of those cars that will look so much better in person

• 
  @amandamunoz77684 жыл бұрын

  Hermoso automóvil

• 
  @bimmere36classic944 жыл бұрын

  Updated pull kzread.info/dash/bejne/gINrrJaCdNbfdZM.html

• 
  @TheVulcan5 жыл бұрын

  Thats quick. Just bought a 1999 328i 5speed manual. Just got m3 wheels and im going to put some rubber on it soon. All stock but break booster is leaking so big air leak and i have no low end power 😂 changing it this weekend

• 
  @user-cd1tb8oq1x5 жыл бұрын

  you have nice lunch

• 
  @MihailaStefanVlog5 жыл бұрын

  0 / 100 kmh 14 secunde :D

• 
  @skreech015 жыл бұрын

  ala e MPH

• 
  @M3NACE7 жыл бұрын

  that thing sounds mean, nice, love the tips!