Пікірлер

• 
  @joseantoniomartinezdiaz212927 күн бұрын

  Tengo este robot Ambrogio 4.0 Elite y no funciona. JuliA Roca de Barcelona al que se lo he comprado ni me responde después de un año de quedar para venir a ver el prblema. Gavira de Cantabría distribuidor sólo asdmite los vendidos por él. O sea que tengo que tragarme casi 4000 euros de robot sin funcionar y segar con la segadora tradicional. Que cada uno tome nota y piense antes de comprar algo de esta marca

• 
  @RaWstYle074 ай бұрын

  Hi, is there an Ambrogio who can mow just straight? Like swimlines?

• 
  @RoyvanVliet Жыл бұрын

  Waar kan ik meer info vinden over de installatie van de draad in deze situatie? Zou het zelf ook zo willen maken.

• 
  @Electronieks2 жыл бұрын

  Hoe is de robot?

• 
  @hendrikdiekmann36752 жыл бұрын

  Is the robot actually that loud? It sounds like a high frequency noise, when ist cuts the grass

• 
  @nielsvandenakker18032 жыл бұрын

  Its just the sound of the blade cutting the air. I gives a bit of an high frequency sound but it is not that loud. My phone just picks it up a bit loud i think

• 
  @ibsn872 жыл бұрын

  are you still happy with this mower? I'm looking to buy one here in Australia, but its about $1,000 more then similar models. This one is 2.6k Its quite a small battery, I don't expect it to last as its being deep cycled so regularly. A guy on YT does a full breakdown of this vs a husqvarna and these are clearly built better. I'm struggling to find if I can make this cross a drive way to do separate zones. How do you find the app, and the UI? Have you since seen other mowers and had any regrets paying what would be top dollar for me here.

• 
  @nielsvandenakker18032 жыл бұрын

  Hi jack, i will get back to you later. You can also send me an email to [email protected] for further information

• 
  @yvesvanderhaeghen1962 жыл бұрын

  I currently own an Robomow RS622, for about 1000 m^2 of gently sloping grass. It's 6-7 years old, and has been nothing but trouble from the start: 3 motors replaced, wheels replaced (not enough grip), front wheel replaced (bearing broken), perimiter drive unit replaced, perimeter wire sensor replaced, ... Lately it has trouble finding the perimeter signal (eventhough the circuit is sound at 17 Ohm, and I can hear it in an AM radio). Basically, it is not a reliable tool (that's an understatement) and the company doesn't give a shit, and I am looking to replace it. Looking at Ambrogio (L20 or 4.0), Stihl or Husqvarna. Leaning towards the Ambrogio's, any comment on the L20 Elite S+ vs 4.0 with a medium battery pack is appreciated.

• 
  @myopenmind5273 жыл бұрын

  Your grass was quite long. Can you show a video of the maintained lawn.

• 
  @RANDOM24h3 жыл бұрын

  Wtf

• 
  @thorwaldcreus6393 жыл бұрын

  I have a Twente elite and is vers worse the robot doesn’t work good, i would-be only say never never but it . I live in belgum

• 
  @Power53 жыл бұрын

  Why is it making crop circles? I was expecting the end to zoom out and it had created a nice drawing.

• 
  @Birdfeeder7953 жыл бұрын

  It does that when it encounters and sense thicker grass.

• 
  @damienhenry5103 жыл бұрын

  Hello . Would you recommend buying one?

• 
  @GiorgosADemetriou3 жыл бұрын

  Hi Niels, great job there. I have one question if you can help me. I installed my base station right outside the lawn area. The lawn area is rectangular and the base station is at one of the corners (i can send you a drawing if you want). The problem i am having is with the wire coming from the back on the base station. The front wire is more than 2 meters straight going into the base. Can the back wire come around from the back of the base and to the the right side of the base and then turn to follow the perimeter? My robot follows the wire stright into the base, but when it gets close to the base if either drifts to the right or left (randomly) and in some cases does not go into the base. I am think there maybe some interfearance with the wire coming from the back. I hope i did not confuse you :) Thank you in advance.

• 
  @ninobruh4083 жыл бұрын

  I will wait another five years to purchase. I GPS sensors sucks It just keeps going in circles. I need one that cut in a pattern path not just random cut and changes direction when it bumps into something. That's why it takes hours for the robot to do its job. 5 to 10 years should improve that problem. I will wait till tesla makes one. It might cost 30,000 but it will be efficient.

• 
  @Skinnypuff2 жыл бұрын

  Cutting in random directions is what makes the lawn healthy and look good.

• 
  @RaWstYle074 ай бұрын

  Thats the American way I guess... As the prevoius post say, it's much healthier for your grass to mow it in random directions. But I know 2 robots who can mow "swinlines" and even chess boards. The Mammotion LUBA 2 AWD or the ECOVACS GOAT G1. I know the Luba does is, because my neighbor has is. His garden looks like a football filed with those straight lines.

• 
  @brendan19693 жыл бұрын

  Hi Niels, I am going to have the same set up, hoping u can help I will send email if thats ok and u might draw out. BRENDAN

• 
  @nielsvandenakker18033 жыл бұрын

  Hi Brendan, you can send me an e-mail to [email protected] i will write you down how you can set this up. Watch out. You really have to be carefull with laying the cable so the robot will drive perfectly straight into the recharge base. Otherwise it won't work.

• 
  @zeshky3 жыл бұрын

  @@nielsvandenakker1803 can you please share how to lay the wire to make it park like that? It's super awesome!

• 
  @LdB123 жыл бұрын

  Hi Niels, any idea how good this actually is on slopes? Have a 45% slope on part of my lawn, just wondering if you would know how it performs. Any advice appreciated. Thanks

• 
  @jimbobarella3 жыл бұрын

  Did you get a response? I am about to go ahead and have a 45% slope.

• 
  @LdB123 жыл бұрын

  @@jimbobarella Got a reply from a different source, a supplier. Said they perform very well and would be confident, it would manage the slope. I haven't gone ahead with it yet, would be interested to hear how you get on with it. Good luck

• 
  @zoba46453 жыл бұрын

  Are you happy with Ambrogio. Is it better than Husqvarna price/performans?

• 
  @nielsvandenakker18033 жыл бұрын

  I think both brands have their pros and cons, i am a mechanic myself and i prefer the build and construction style and quality from the ambrogio over the machines from husqvarna. Husqvarna on the other side has some very strong possibility's too such as finding home, never had much issue's with the ambrogio vut i think husqvarna tackles this nicer. Its just personal prefference in that case. Overall the ambrogio is covering a lot more area and is more rugged than husqvarna. Price doesn't vary a lot if you compare apples to apples in terms of coverage. Like the stainles steel parts and screws, roller bearing wheels and of course the big solid blade from the ambrogio

• 
  @rosiebones1003 жыл бұрын

  Really cool 😎 Setting one up now and can’t seem to work out from the instructions how to get it to drive straight in and back out of the docking station like that. Only in the back and out the front with the station sitting on the perimeter wires route. Could you tell me how you pulled that off??? Greatly appreciated 🙏🏼

• 
  @nielsvandenakker18033 жыл бұрын

  Hello, can you please make a video of the situation you have right there? That way it is easier for me to explain and see what exactly is going on there.

• 
  @dennisgray63243 жыл бұрын

  If you adjust the perimeter wires correctly you don't have to trim any more than you would if you were mowing with your standard gas mower. If you trim first; it will look great when Ambrogio is done for the day. Ambrogio is Miller Lite spelled backward.

• 
  @wilfredrottier3 жыл бұрын

  I'm thinking about buying an Ambrogio Next Line robot mower. Is it any good? Any hints and tips?

• 
  @nielsvandenakker18033 жыл бұрын

  Hello, i sell ambrogio robotic mowers for about 10 years now and see what all improvements they made in the past years. I think every brand had their own problems and issues but overall such as build quality my opinion ambrogio is very good in building robots. What does your garden look like? Maybe consider L250 from ambrogio, why? Because they are very flexible in coverage capacity. And like the pivotting front wheels!

• 
  @wilfredrottier3 жыл бұрын

  @@nielsvandenakker1803 My grass yard is about 3.500 m2 and rather flat. However, an occasional small branch, some leaves of walnuts may fall on the grass and therefore the robot mower needs to be sturdy and robust. Not afraid of occasional debree. Therefore I am looking into the Ambrogio Elite Next Line 4.36.

• 
  @nielsvandenakker18033 жыл бұрын

  @@wilfredrottier okay i get it. Just for the capcity the L250I Elite S+ would be enough. However the build quality on the 4.36 is just a little bit heavier so the would match your belongings more i guess on sturdyness. Have to say that the next line series are a bit more sensitive for small holes in the grass to fall in with a front wheel. But thats the only thing. And also a tip for your installation is to make a kind of hard driveway towards the charging station for about 2 or 3 meter in front of the base. Thats bacause it will turn itself every day on the same place to dock itself. After a while the grass will be not very nice in front bacause the quality brings a heavy weight with it also. If you have more questions pleas ask.

• 
  @wilfredrottier3 жыл бұрын

  Niels Van den akker Thanks for the hints and tips, much appriciated! 👍😉

• 
  @robertsander75654 жыл бұрын

  can you tell me how you laid the cable in front of and behind the charging station

• 
  @nickspender32283 жыл бұрын

  Old post, bit if you need help let me know

• 
  @michaelscharf97053 жыл бұрын

  @@nickspender3228 Please Can you Share a drawing of cable Position?

• 
  @michabudzynski50713 жыл бұрын

  @@nickspender3228 I would be grateful for your help. Can you share some details about special docking? Maybe drawings?

• 
  @vasiabikeru4 жыл бұрын

  Hi! What made you decide for the L250 instead of the 4.0 NextLine?

• 
  @1valencius4 жыл бұрын

  how are you going to use a robot? wondering how to blade? don't you need to change often?

• 
  @user-nn9mo3qf1r3 жыл бұрын

  No, this robot has a full steel hard blade. It is changed once a season.

• 
  @karkarulezz4 жыл бұрын

  How is your expierence with the Ambrogio robot reliability? Would appreciate your answer

• 
  @nielsvandenakker18034 жыл бұрын

  The reliability of the ambrogio robotic mowers is very good. But mostly if you spend enough attention to your garden to remove all the possible obstacles for the robot such as steep edges. But that is for al brands of roboticmowers the same story. What i like about the ambrogio over other brands is the way they build the machines, every bolt in stainless steel en very well built and rugged parts. Very premium feel machine

• 
  @karkarulezz4 жыл бұрын

  @@nielsvandenakker1803 That is great to hear. The cutting system and algorithm looks quite intelligent. What about the mobile app? Did you have any expierence with it? Personally I am deciding on elite 350i, as the lawn area is large. Maybe you had expierence with larger ambrogio robots?

• 
  @nielsvandenakker18034 жыл бұрын

  @@karkarulezz i work with a company which installs robotic mowers. So i have a lot experience with the mobile app. The app is a nice feature especially for the working time setup and every detailed setup for the robot and the garden. You can also see the status of the work he does en sent it to work from the other side of the world. 350 is a very nice machine. Maybe consider the 4.36 if it fits the capacity. The build quality of the next line is just fenomenal. I will cost a bit more money but it is worth it. If you place this mowers next to an ride on mower for such areas it will cost you less money for a long time stay on the robotmower.

• 
  @Rusl_U4 жыл бұрын

  Выглядит, как детская игрушка... только цена не детская: у нас тысячу долларов. И чего он так странно ездит? Кругами... Почему не от края до края? 600 квадратных метров - это рекомендуемый объем его работы за 1 день? Или в целом для большего количества, чем 600 квадратных метров его покупать не стоит?

• 
  @user-nn9mo3qf1r3 жыл бұрын

  Когда на нож возрастает нагрузка от высокой или густой травы, робот активирует спиральный режим кошения, т.к. он самый производительный при большой нагрузке. Робот доезжает до кабеля периметра и переезжает его до середины своего корпуса. Производительность этого робота около 1-1,5 соток в час и 2 часа автономной работы, т.е. за один выезд он окашивает 2-3 сотки. Производителем заложено, чтобы в течение дня он выезжал на кошение 2-3 раза. За 2-3 выезда робот сможет выкосить 4-6 соток. Это сделано, чтобы газон был занят роботом минимальное время, чтобы газоном могли пользоваться владельцы. Более бюджетные и простые роботы 1 час косят и 1 час заряжаются, а для окашивания 6 соток они должны работать с 0:00 по 23:59 - это прямо в инструкции прописано. Для большей площади нужно покупать более мощные роботы и, соответственно, более дорогие. У этого производителя ассортимент от 2 соток и 2 гектар. В ценовом сегменте 1000$ это лучшая модель!

• 
  @Rusl_U3 жыл бұрын

  @@user-nn9mo3qf1r Понятно. Спасибо. :)

• 
  @nielschristensen35724 жыл бұрын

  Hi Niels - May I ask? it looks like you are doing a 90degr just in front of the Dock and then 70-100cm before doing a u turn and then go straight into the base ? What is the distance between the two wires in the u-turn? 20cm. The exit wire or is this the in wire? is this then going 20cm into the field (parallel to the u - wire) and then going 90degr away?

• 
  @nielsvandenakker18034 жыл бұрын

  The distance between the wires are about 10 cm.

• 
  @nielschristensen35724 жыл бұрын

  @@nielsvandenakker1803 super and Thank you. It seems to work fine even if not as per manual but I think I can use this trick in order to place my dock in a more convenient location

• 
  @majikdealer88994 жыл бұрын

  @@nielsvandenakker1803 Thanks for this, it really looks good, though not sure what you have done. Is this wire just the perimeter wire, or is there a guide wire there also. If you could add a schematic that would be great. I can only see one wire entering the station, but can't see the configuration due to green wire on green grass.

• 
  @nielsvandenakker18034 жыл бұрын

  @@majikdealer8899 i can draw it out for you. If you like you can send me an email to [email protected]

• 
  @nickspender32283 жыл бұрын

  @@nielsvandenakker1803 hello I'm try to achieve the same thing could you help?

• 
  @andrewallen99184 жыл бұрын

  How much grass doesn't get cut next to the border? As in, how much strimming do you need to do?

• 
  @nielsvandenakker18034 жыл бұрын

  He leaves a strip of grass for about 7 cm. You can replace that by a rock

• 
  @bruce25914 жыл бұрын

  Thx for sharing - looks very promising.

• 
  @nejcpobolsar29194 жыл бұрын

  how did you lay the wire to allow robot go off the grass?

• 
  @nielsvandenakker18034 жыл бұрын

  Lay the cable for about 5cm from each other underneath the charging station from front to back.

• 
  @nickspender32283 жыл бұрын

  @@nielsvandenakker1803 so no wire running up the center line in the base station