Carpoint: your one-stop-shop for all your automotive needs! With an extensive range of high-quality car accessories, tools, trailer parts, replacement parts, and much more, Carpoint has everything you need to upgrade your ride.
they make this look so easy. it took me like 40 minutes, those stupid metal parts would NOT COME OUT
@e.r.92764 ай бұрын
Im trying to do it but the adapter doesn’t fit under the bumper
@shookmusic5 ай бұрын
Ur phone holders wont stick on my window. It ls bad
@thirza37255 ай бұрын
Wow dit was echt moeilijk!
@touriahassani74246 ай бұрын
il ne s'agit pas de martres qui vivent dans les for^ts mais de fouines au col blanc qui sont citadines
@Michael1990Gino8 ай бұрын
Vielen Dank. Haben bestimmt 20 Minuten rumgetan bis ich das Video gesehen habe mit dem Drehmechanismus
@Sycon-X10 ай бұрын
Zo is het, maar zo makkelijk je dat verschuift werkt in het echt niet zo. Dat is niet verschuifbaar Het achterlijke sowieso van dit systeem is; waarom is het überhaupt te “verdraaien” als het maar op 1 manier pas. Beter gelijk gewoon zo maken en niets verdraaibaar dan ben je er al op niet?💡
@dtbyo338510 ай бұрын
Merci beaucoup
@Lalla.photographie.production10 ай бұрын
Bonjour😊, petite question peut on se servir du câble de 13 ou 7 broche pour isoler les fils qui ne serviront pas et prendre juste ceux dont on a besoin pour faire une installation par exemple d'une prise alume cigare en 12v ou prise en 12v ? Je vous dit ça car le câble est déjà tiré et donc ça me ferai ça de moin à faire sur mon camion pour installer une prise 12v....et si oui quels fil sont a utiliser cpour les branchement de ma prise merci 😊
@Burterrr Жыл бұрын
Hoe sluiten jullie dat kleine plus-draadje nou aan op de enorme schroef?
@Airwolf205 Жыл бұрын
Quel produit conseillé ?
@thrymartin Жыл бұрын
Ca concerne aussi l'accouplement de la 13 dans sa prise. bah aie aie aie pourquoi je n'ai pas vu cette video avant😀 En fait je n'avais utilisé que des 7 broches, on pousse et le couvercle vient s'encocher dans la prise, bon. Et la, je me fais monter un 13, et en essayant de faire comme le 7, sans comprendre cette vis quart de tour, j'ai forcé comme un âne parceque le teton qui rentre dans la gorge reste sur la surface et je suis même étonné après cette bagarre à forcer, d'y être arrivé ! Je réessaye en positionnant le quart de tour correctement et ... comme papa dans maman et bien mieux sécurisé que le 7 broches. Bon, ça se voit que je suis tout rouge la ? 🥴 (accouplement, teton, entre, gorge, papa dans maman ... je vais me faire virer de youtube la 🥳)
@dylandossantos9002 Жыл бұрын
Voilà pourquoi l'enjoliveur bougeait !! Merci beaucoup !
@vblaas246 Жыл бұрын
Er wordt niks meer gezegd over aangedreven wielen?
@basmeer4807 Жыл бұрын
Ligt het aan mij of is de instructie in stap 1 en stap 2 (gele uiteinde doorvoeren) in de video al direct anders uitgevoerd? Waarom is het zo belangrijk dat Geel achter de band langs gaat, als de demonstratie hier klaarblijkelijk precies het omgekeerde doet...
@niekk2000 Жыл бұрын
Ik heb de carpoint instructies uit de verpakking ook gevolgd (dus stap 1 en 2 ook andersom ten opzichte van de video) en toen ik klaar was leek de gehele ketting eigenlijk niet echt goed aangespannen te zijn. Kan dit hierdoor komen?
@basmeer4807 Жыл бұрын
@@niekk2000 Ik heb geen idee, ik moet mijn kettingen nog omleggen. Het lijkt mij overigens dat het weinig verschil kan uitmaken welke kant je achter de band doorvoert, het resultaat is namelijk hetzelfde.
@CarpointEurope Жыл бұрын
Scherp, goed gezien! Bij het model wat in de video gebruikt wordt zijn de kleuren geel en blauw omgedraaid. Maar het maakt opzicht niet uit welke kleur je als eerste achter door voert.
@CarpointEurope Жыл бұрын
Also watch the new instruction video of the latest Carpoint snow chains! kzread.info/dash/bejne/pZaqma6Tc7iydqw.html
@anouck7674 Жыл бұрын
pourquoi toutes ces fautes d'orthographe et d'accord qui empêchent de comprendre ???
@bernardtrinez3157 Жыл бұрын
Normal , son prof de français s'est présenté : Je suis le nouveau prof de français qu'on vous a causé
@luuk6718 Жыл бұрын
Hoi Carpoint, wanneer je de kluis op slot hebt, kan je deze er dan ook niet meer uit schuiven?
@CarpointEurope Жыл бұрын
Hoi Luuk, Als de autokluis op slot is kan hij ook niet meer worden uitgeschoven. ^ Tim van Carpoint
@Andy-cu6bw Жыл бұрын
If you are using a 7pin to 13 pin adapter you can use this to turn the inner to 3 o'clock, so long as you don't push it in too far.
@sylvainpierre29732 жыл бұрын
C'est une fausse piste ça ne marche pas, car quand on tourne l'excroissance qui se trouve à 6h, juste avant de branche, elle ne passe pas à 9h mais à 8h, tu peux toujours essayer de la rentrer, rien à faire, ça ne marche pas ...
@jolumamdospuntocero2 жыл бұрын
Gracias 👍🏻🤪🤪
@gesichtnasebein2 жыл бұрын
Bei mir steht der Adapter wie bei 0:13 gezeigt in der senkrechten Position anstatt in der waagrechten, ich kann das Innenleben allerdings nur minimal verschieben. Was ist die Lösung und wozu ist es wichtig?
@lydiamaertens2 жыл бұрын
ik kan niets zien van de video
@videofunk_12 жыл бұрын
Was ist mit Metallstreifen?
@TCSC472 жыл бұрын
In the UK you are not allowed to use a flexible rope to tow a car. You have to use a purpose designed solid tube as used by the professional recovery people.
@TCSC472 жыл бұрын
When I first tried my adapter I did not realise it is only the outer sleeve that you turn, not the whole plug which is held in place by the pins. Stopped short of using excessive force when I realised my mistake.
@maxflight7778 ай бұрын
You aren’t alone 😂
@pierremartinez21692 жыл бұрын
bien le réglage 2 et cran savais pas
@altorre5739 Жыл бұрын
Un nid de poule : bang. Au deuxième : un roue noire.
@pykogane2 жыл бұрын
Parfait, merci beaucoup !
@wolfofodin84683 жыл бұрын
la plus au plus le moins au moins ça on le sait dèja !!!! étape par étape serait mieux
@boenheijgen42093 жыл бұрын
zeer slecht instruktie
@JeugdVoetbalMereU8 Жыл бұрын
Hier ook. Op mirakuleuze wijze staat plots na A01 het ding plots al in elkaar 1 van alle andere hulpstukken. Je krijgt dat niet te zien. Gevolg? Bij mij brak alles af. Wat een prullen! 20 euro de vuilbak in. Afzetters.
@XHeadhunter663 жыл бұрын
Und die Metallstreifen werden nicht wieder eingesetzt?
@Perplexer12 жыл бұрын
Doch. Die haben das vergessen, haha.
@martinpamperl31123 жыл бұрын
6FP3+JG Wien
@nicu86283 жыл бұрын
Thank you ! very helpful video!
@eisi23403 жыл бұрын
Habe eine Plane von Carpoint gekauft, nach ca 1,5 Monaten war die 1 Schicht der Plane vom Winde verweht, nach 3 Monaten zerissen, wasserabweisend darunter versteh ich zwar was anderes aber......... also für mich nicht empfehlenswert "Daumen nach unten"
@TheRollingBear4 жыл бұрын
kk ruitenwisser. altijd gezeik. met die fking kut instructies
@trudilatour46864 жыл бұрын
what would also be useful to add, is that the metal blades have to be put back so that the curve fits the windscreen
@amycooke98715 ай бұрын
SEriously.. was wondering what happened to the metal blades!
@andremeulemans27694 жыл бұрын
IK heb een peugeot 208 uit 2014 maar ik krijg die eindstoppen niet los. Hoe moet ik dat doen ?
@mousetreat4 жыл бұрын
So much waste, having to throw away 8 adapters. Per blade. So a new set means 16 adapter go straight to the landfill. Car manufacturers should make one universal standard for this.
4 жыл бұрын
Thank you
@davidblackhurst85863 жыл бұрын
Thanks I’m off to retrieve mine from the dustbin !!
@JuiceBanger15 жыл бұрын
i cant get it back out. it turns back to the left but wont pull out?
@CarpointEurope5 жыл бұрын
That's no good :-( It's difficult for us to see exactly what the problem is without having the car here with us. But have you tried jiggling the adapter a bit once turned to the left? Perhaps that will help in disconnecting the adapter. Could you let me know if it worked? ^Lars-Erik
@JuiceBanger15 жыл бұрын
@@CarpointEurope I got it out by using force and jiggling. I now have one of the green alignment tools and have it working now.
@khraw58255 жыл бұрын
from where I can buy ruber blade
@ServiceBestInternational5 жыл бұрын
Hi, If you let me know in which country you live, I can check where you can buy them. ^Lars-Erik
@timothylegg4 жыл бұрын
@@ServiceBestInternational I can't find them in the US either. Ten years ago, I bought the stuff on a reel, as much as I wanted. Now I'm told that never did exist... I ran out of my supply. If you can set me up with 10 meters of the stuff at a reasonable price, absolutely do send me a message.
@vanominator5 жыл бұрын
thank you !!
@davidchung80055 жыл бұрын
Crappy video as the most important step is omitted.
@WeltinFradsmussen11 ай бұрын
Which is...?
@blipdriver5 жыл бұрын
Ideally you should start by connecting the red cable to the positive terminal of the dead battery, then the live. Next connect the black cable between the negative battery of the live and a well-earthed piece of the car engine or chassis, NOT the negative terminal. This decreases the chance of sparks.
@1963Sly5 жыл бұрын
The new rubber he put in has the blades in them already; otherwise, you'd have to put the blades in with the rubber or it wouldn't stay on
@CarpointEurope5 жыл бұрын
Hi 1963Sly, this video was first uploaded in 2011. In the meanwhile we have updated this video. If interested, you can watch it on kzread.info/dash/bejne/fYiZl7WCZNeon7Q.html ^Lars-Erik
@garyfreefly16 жыл бұрын
So simple and yet if you don't know so difficult ! Thanks
Пікірлер
Je peu cette enjo mais c introuvable
How do you secure it to your car?
they make this look so easy. it took me like 40 minutes, those stupid metal parts would NOT COME OUT
Im trying to do it but the adapter doesn’t fit under the bumper
Ur phone holders wont stick on my window. It ls bad
Wow dit was echt moeilijk!
il ne s'agit pas de martres qui vivent dans les for^ts mais de fouines au col blanc qui sont citadines
Vielen Dank. Haben bestimmt 20 Minuten rumgetan bis ich das Video gesehen habe mit dem Drehmechanismus
Zo is het, maar zo makkelijk je dat verschuift werkt in het echt niet zo. Dat is niet verschuifbaar Het achterlijke sowieso van dit systeem is; waarom is het überhaupt te “verdraaien” als het maar op 1 manier pas. Beter gelijk gewoon zo maken en niets verdraaibaar dan ben je er al op niet?💡
Merci beaucoup
Bonjour😊, petite question peut on se servir du câble de 13 ou 7 broche pour isoler les fils qui ne serviront pas et prendre juste ceux dont on a besoin pour faire une installation par exemple d'une prise alume cigare en 12v ou prise en 12v ? Je vous dit ça car le câble est déjà tiré et donc ça me ferai ça de moin à faire sur mon camion pour installer une prise 12v....et si oui quels fil sont a utiliser cpour les branchement de ma prise merci 😊
Hoe sluiten jullie dat kleine plus-draadje nou aan op de enorme schroef?
Quel produit conseillé ?
Ca concerne aussi l'accouplement de la 13 dans sa prise. bah aie aie aie pourquoi je n'ai pas vu cette video avant😀 En fait je n'avais utilisé que des 7 broches, on pousse et le couvercle vient s'encocher dans la prise, bon. Et la, je me fais monter un 13, et en essayant de faire comme le 7, sans comprendre cette vis quart de tour, j'ai forcé comme un âne parceque le teton qui rentre dans la gorge reste sur la surface et je suis même étonné après cette bagarre à forcer, d'y être arrivé ! Je réessaye en positionnant le quart de tour correctement et ... comme papa dans maman et bien mieux sécurisé que le 7 broches. Bon, ça se voit que je suis tout rouge la ? 🥴 (accouplement, teton, entre, gorge, papa dans maman ... je vais me faire virer de youtube la 🥳)
Voilà pourquoi l'enjoliveur bougeait !! Merci beaucoup !
Er wordt niks meer gezegd over aangedreven wielen?
Ligt het aan mij of is de instructie in stap 1 en stap 2 (gele uiteinde doorvoeren) in de video al direct anders uitgevoerd? Waarom is het zo belangrijk dat Geel achter de band langs gaat, als de demonstratie hier klaarblijkelijk precies het omgekeerde doet...
Ik heb de carpoint instructies uit de verpakking ook gevolgd (dus stap 1 en 2 ook andersom ten opzichte van de video) en toen ik klaar was leek de gehele ketting eigenlijk niet echt goed aangespannen te zijn. Kan dit hierdoor komen?
@@niekk2000 Ik heb geen idee, ik moet mijn kettingen nog omleggen. Het lijkt mij overigens dat het weinig verschil kan uitmaken welke kant je achter de band doorvoert, het resultaat is namelijk hetzelfde.
Scherp, goed gezien! Bij het model wat in de video gebruikt wordt zijn de kleuren geel en blauw omgedraaid. Maar het maakt opzicht niet uit welke kleur je als eerste achter door voert.
Also watch the new instruction video of the latest Carpoint snow chains! kzread.info/dash/bejne/pZaqma6Tc7iydqw.html
pourquoi toutes ces fautes d'orthographe et d'accord qui empêchent de comprendre ???
Normal , son prof de français s'est présenté : Je suis le nouveau prof de français qu'on vous a causé
Hoi Carpoint, wanneer je de kluis op slot hebt, kan je deze er dan ook niet meer uit schuiven?
Hoi Luuk, Als de autokluis op slot is kan hij ook niet meer worden uitgeschoven. ^ Tim van Carpoint
If you are using a 7pin to 13 pin adapter you can use this to turn the inner to 3 o'clock, so long as you don't push it in too far.
C'est une fausse piste ça ne marche pas, car quand on tourne l'excroissance qui se trouve à 6h, juste avant de branche, elle ne passe pas à 9h mais à 8h, tu peux toujours essayer de la rentrer, rien à faire, ça ne marche pas ...
Gracias 👍🏻🤪🤪
Bei mir steht der Adapter wie bei 0:13 gezeigt in der senkrechten Position anstatt in der waagrechten, ich kann das Innenleben allerdings nur minimal verschieben. Was ist die Lösung und wozu ist es wichtig?
ik kan niets zien van de video
Was ist mit Metallstreifen?
In the UK you are not allowed to use a flexible rope to tow a car. You have to use a purpose designed solid tube as used by the professional recovery people.
When I first tried my adapter I did not realise it is only the outer sleeve that you turn, not the whole plug which is held in place by the pins. Stopped short of using excessive force when I realised my mistake.
You aren’t alone 😂
bien le réglage 2 et cran savais pas
Un nid de poule : bang. Au deuxième : un roue noire.
Parfait, merci beaucoup !
la plus au plus le moins au moins ça on le sait dèja !!!! étape par étape serait mieux
zeer slecht instruktie
Hier ook. Op mirakuleuze wijze staat plots na A01 het ding plots al in elkaar 1 van alle andere hulpstukken. Je krijgt dat niet te zien. Gevolg? Bij mij brak alles af. Wat een prullen! 20 euro de vuilbak in. Afzetters.
Und die Metallstreifen werden nicht wieder eingesetzt?
Doch. Die haben das vergessen, haha.
6FP3+JG Wien
Thank you ! very helpful video!
Habe eine Plane von Carpoint gekauft, nach ca 1,5 Monaten war die 1 Schicht der Plane vom Winde verweht, nach 3 Monaten zerissen, wasserabweisend darunter versteh ich zwar was anderes aber......... also für mich nicht empfehlenswert "Daumen nach unten"
kk ruitenwisser. altijd gezeik. met die fking kut instructies
what would also be useful to add, is that the metal blades have to be put back so that the curve fits the windscreen
SEriously.. was wondering what happened to the metal blades!
IK heb een peugeot 208 uit 2014 maar ik krijg die eindstoppen niet los. Hoe moet ik dat doen ?
So much waste, having to throw away 8 adapters. Per blade. So a new set means 16 adapter go straight to the landfill. Car manufacturers should make one universal standard for this.
Thank you
Thanks I’m off to retrieve mine from the dustbin !!
i cant get it back out. it turns back to the left but wont pull out?
That's no good :-( It's difficult for us to see exactly what the problem is without having the car here with us. But have you tried jiggling the adapter a bit once turned to the left? Perhaps that will help in disconnecting the adapter. Could you let me know if it worked? ^Lars-Erik
@@CarpointEurope I got it out by using force and jiggling. I now have one of the green alignment tools and have it working now.
from where I can buy ruber blade
Hi, If you let me know in which country you live, I can check where you can buy them. ^Lars-Erik
@@ServiceBestInternational I can't find them in the US either. Ten years ago, I bought the stuff on a reel, as much as I wanted. Now I'm told that never did exist... I ran out of my supply. If you can set me up with 10 meters of the stuff at a reasonable price, absolutely do send me a message.
thank you !!
Crappy video as the most important step is omitted.
Which is...?
Ideally you should start by connecting the red cable to the positive terminal of the dead battery, then the live. Next connect the black cable between the negative battery of the live and a well-earthed piece of the car engine or chassis, NOT the negative terminal. This decreases the chance of sparks.
The new rubber he put in has the blades in them already; otherwise, you'd have to put the blades in with the rubber or it wouldn't stay on
Hi 1963Sly, this video was first uploaded in 2011. In the meanwhile we have updated this video. If interested, you can watch it on kzread.info/dash/bejne/fYiZl7WCZNeon7Q.html ^Lars-Erik
So simple and yet if you don't know so difficult ! Thanks
leider ist das Video taubstumm