Пікірлер

• 
  @bollardboy19814 күн бұрын

  Should have been a surgeon!

• 
  @bumbleshufflesdiy59084 күн бұрын

  I wouldn't fancy being subject to one of my own operations though !!

• 
  @makkam489 күн бұрын

  Where is the rear wiper fuse located

• 
  @bumbleshufflesdiy59089 күн бұрын

  Sorry I'm not sure where that fuse is located. Try here maybe: fuseandrelay.com/audi/q7.html

• 
  @darranconnor537913 күн бұрын

  Ps have you ever had a smell of burning oil in your cab ? It’s only now and again but I am a little concerned.

• 
  @bumbleshufflesdiy590813 күн бұрын

  I had a lot of issues with that car but I don't ever remember burning oil smells in the cabin. Maybe a leak somewhere and the engine heat burning it off, then the heating system bringing the smell into the cabin?

• 
  @darranconnor537914 күн бұрын

  Massive help 👍🏻

• 
  @bumbleshufflesdiy590814 күн бұрын

  Great stuff glad it helped. Thanks very much for the kind feedback.

• 
  @richardpeel-k1c15 күн бұрын

  Just watched the oil and filter change, on BMW 320i. Well done, good to see excellent engineering practice of cleaning and oil O ring seals and screw threads before re assembly. And not overtightening too! And running engine after to check for any oil leaks.

• 
  @bumbleshufflesdiy590814 күн бұрын

  Thanks very much for watching my video and for taking the time to leave this kind feedback, it's very much appreciated indeed.

• 
  @PacifierHDx19 күн бұрын

  I have the exact same issue. Gonna order the part now.

• 
  @bumbleshufflesdiy590819 күн бұрын

  Wow it must be common then after all. It's definitely a weird one !!

• 
  @lukecutting780122 күн бұрын

  How come your handle bars slipped straight in mine won't

• 
  @bumbleshufflesdiy590822 күн бұрын

  Try loosening up the handlebar screw to make a little more room. Maybe on urs it's already tightened up a little too much.

• 
  @ItFleebАй бұрын

  Do you have to use grease for this or is it not needed

• 
  @bumbleshufflesdiy5908Ай бұрын

  Hi, I'm not sure if I was supposed to or not but I did not use any grease during this build and I am still using the bicycle regularly for 25k + cycles with no issues.

• 
  @ItFleebАй бұрын

  @bumbleshufflesdiy5908 ight thanks lad sounds fine just saw a halfords building guide and it used it just didnt know if i needed it or not

• 
  @bumbleshufflesdiy5908Ай бұрын

  Jeepers maybe it is supposed to have grease applied. No grease came with it so I didn't even know it was supposed to have any grease. Though it's been working grand for two summers lots of use no issue, so maybe it's not super critical !!

• 
  @robertwood8557Ай бұрын

  Thank you!!

• 
  @bumbleshufflesdiy5908Ай бұрын

  You're welcome!

• 
  @pitokara39332 ай бұрын

  Thanks for the upload mate, really useful and straightforward

• 
  @bumbleshufflesdiy59082 ай бұрын

  Thanks very much for the kind feedback. Glad it helped.

• 
  @Quick20042 ай бұрын

  Use impact wench on rosebush tool takes 30 seconds 👍 done mine last night

• 
  @bumbleshufflesdiy59082 ай бұрын

  Thanks for the feedback. Il remember that if there's a next time !!

• 
  @danielbryanlhr2 ай бұрын

  My car is a 2009 Audi A3 1.8 TFSI 8P1 incase anyone has a similar vehicle.

• 
  @bumbleshufflesdiy590822 күн бұрын

  Thanks for your comment. Between all our experiences I'm sure it all comes together to help others (well hopefully anyway).

• 
  @danielbryanlhr2 ай бұрын

  Great video. I've just cleaned my faulty unit... I soaked it for 24hrs in a combination of WD-40, bleach, washing up liquid and water, and then used a small wire brush (size of a toothbrush). When I replaced it at first it didn't work, but I realised that I had done the screws that hold the motor to the unit way too tight. Those two metal inserts that the screws go into were a nightmare for me but after loosening them slightly it worked fine. I didn't bother using grease to lubricant the internals tho.... Also (because I skipped some of your video) I'm not sure if you noticed that there's a rubber O ring that goes on the spindle that protrudes through the window which the windscreen wiper attaches to. That little rubber o ring is what 'should' stop the water seeping into the unit but it doesn't. One problem I have now is that my cleaned unit is far too powerful... when the water squirts out it travels about 6-8 feet! I have to make sure there's no motorcyclists or other cars around when I want to clear my rear window because it could put out 🔥 it's so powerful! Thanks for the video it helped me to put it all back together really easily! Oh, in order to get the trim off my boot, I used one of those 'scrapers' that people use to clear ice from their cars. Because it's slightly curved at the end it worked a treat!!

• 
  @bumbleshufflesdiy59082 ай бұрын

  Great job glad you got sorted and that you've now got a powerhose!! Thanks very much for the positive feedback. Update after time to let us all know if your fix is long lasting.

• 
  @33gall2 ай бұрын

  I need to do this job myself, it’ll come in very handy when I get round to fitting a new one. Good local info too lol, I’m in Belfast….followed

• 
  @bumbleshufflesdiy59082 ай бұрын

  Thanks very much I appreciate that. Good luck with the job, I'm sure will work out grand!!

• 
  @33gall2 ай бұрын

  @@bumbleshufflesdiy5908 easier than getting a complete door from the scrap yard, that's what the Mrs told me to do 😆

• 
  @bumbleshufflesdiy59082 ай бұрын

  Hell yeah much easier. Actually the cheap regulators are ok in my opinion. I have had them not quite fit 100% in the past but they work fine and when the car is getting on a bit, that's good enough for me.

• 
  @33gall2 ай бұрын

  @bumbleshufflesdiy5908 I specialise more in MK1 TT's but your video definitely comes in handy to give me an idea what to expect. Only got the Q7 last month and only replaced a speed sensor and dpf sensor so far lol

• 
  @bumbleshufflesdiy59082 ай бұрын

  @33gall haha may be a few more replacements ahead in that case (great car tho all the same). Some other repairs I've done on Q7 are also on the chanel, including air suspension / compressor etc which was a huge saving doing as DIY.

• 
  @kevinclark28563 ай бұрын

  I DONE OIL CHANGE ON MY N43 HALF HOUR LATTER HAD A FUCKING ROD KNOCK NO ITS FUCKED SHOULD LEFT IT ALONE WAS MINT BEFORE HAND N43 ENGINE AS NIGHTMEARS AND BMW NEW THAT FROM THE START

• 
  @bumbleshufflesdiy59083 ай бұрын

  Oh no that's terrible news. I was always afraid of the engine on mine giving up (timing chain guides / oil pressure etc) and that's partly why I got rid of it as I viewed it as a ticking time bomb. What's your next move with yours?

• 
  @barbarakerr94203 ай бұрын

  I wish you could sort my car out. My idiot husband and his mate are always at it

• 
  @bumbleshufflesdiy59083 ай бұрын

  Sounds like two pretty awesome guys !!

• 
  @paulgrowcott47823 ай бұрын

  This looks easier than messing with the sump plug. How do I know how much oil goes in?

• 
  @bumbleshufflesdiy59083 ай бұрын

  Hi Paul. Thank you very much for your comment. Yes we agree there is no risk of stripping the sump plug this means. We used castrol oil selector (or the cars manual) to identify the fill capacity and also pay attention to how much oil we extracted.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone (and my apologies for the audio - I will try to improve in future videos). If you liked the video please consider subscribing to help me build the chanel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone (and my apologies for the audio - I will try to improve in future videos). If you liked the video please consider subscribing to help me build the chanel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone (and my apologies for the audio - I will try to improve in future videos). If you liked the video please consider subscribing to help me build the chanel. Thank you very much.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Thanks very much for watching my video everyone (and my apologies for the audio - I will try to improve in future videos). If you liked the video please consider subscribing to help me build the chanel. Thank you very much.

• 
  @2004Banshee3 ай бұрын

  Hi can you change the high beams to xenon I'm trying to find this out and there is not much on KZread to answer me question

• 
  @bumbleshufflesdiy59083 ай бұрын

  I'm really sorry but I sold that car quite a while ago and I don't know the answer. I hope you find the info your looking for.

• 
  @ailo4x43 ай бұрын

  Very helpful! I'm a bit dizzy now from the camera movement but it was worth it ;-) It's good that you changed the vac hoses while you were in there. We have a saying in the military; "the easiest problem to fix is the one your prevent." Cheers!

• 
  @bumbleshufflesdiy59083 ай бұрын

  Ha I like that saying. Thanks very much for the kind feedback and I note the camera work / angles, which will continue to try and improve in future videos.

• 
  @stuartscharcarnie15753 ай бұрын

  Your video easily helped me fix my JVC TV after being quoted £90. It cost me £12.50 for part and fitted myself thank you. Try and fix before throwing in the skip so easy to repair anyone can do with a screwdriver 👍

• 
  @bumbleshufflesdiy59083 ай бұрын

  Brilliant well done. Another DIY success story, they always make me happy !!

• 
  @fiazmariavlogs23803 ай бұрын

  Thank you Sir.

• 
  @bumbleshufflesdiy59083 ай бұрын

  Your are more than welcome. I hope you found it useful and thanks for the kind feedback.

• 
  @loxyroxback71854 ай бұрын

  Mine stopped at halfway, does not want to move, is it 100% the motor died?

• 
  @bumbleshufflesdiy59084 ай бұрын

  It's maybe suffered from some water ingress and essentially shorted out (hard to tell without looking at it). The aftermarket motors are so cheap I just bought one. My aftermarket motor is now playing up slightly but it lasted quite a while.

• 
  @RMiah1214 ай бұрын

  Also is there meant to be two O-rings ? As I got one in the package and also seen an o ring on the part that goes on to the EGR

• 
  @bumbleshufflesdiy59084 ай бұрын

  I only got one with mine but (and this is testing my memory) the old O ring remained stuck in the hole and I had to remove it before fitting the new part, along with the new O ring. So on mine there was only ONE O ring fitted. Does that make sense or have I misunderstood?

• 
  @RMiah1214 ай бұрын

  @@bumbleshufflesdiy5908 that makes sense bud, really appreciate the swift response. My E60 seemed to be a poorly maintained car by previous owner, it had silicone and 2 O rings to stop the leak. Very glad I came across your video

• 
  @bumbleshufflesdiy59084 ай бұрын

  Thanks very much for watching my video everyone. If you liked the video please consider subscribing to help me build the channel. Thank you very much.

• 
  @davegavin79144 ай бұрын

  Least you persevered and did the job well done that man ! 👍🏻😉

• 
  @bumbleshufflesdiy59084 ай бұрын

  Thanks for the feedback and yes, I remember this job was a pain in the arse alright !!

• 
  @benjninja78104 ай бұрын

  What was the reason for changing this part?Our Q7 keeps overheating so I was guessing it could be the thermostat. The glow plug sign keeps coming so I’m not sure

• 
  @bumbleshufflesdiy59084 ай бұрын

  I changed this thermostat because my Q7 was actually running cold. As soon as I started driving at speed the engine temperature started dropping and with it the cabin heat. To me this meant that the thermostat was stuck open and the engine was being over cooled. The problem is corrected now. I suppose if a thermostat sticks in the closed position it could result in the opposite condition (I.e. overheating).

• 
  @benjninja78104 ай бұрын

  @@bumbleshufflesdiy5908 Okay I’ll try that and see what happens.Thank you 👍🏼

• 
  @bumbleshufflesdiy59084 ай бұрын

  I hope you get sorted. Ps the best thing to do is read the fault codes and see where that leads you (rather than just replacing parts if you know what I mean).

• 
  @Chris-ss1dn4 ай бұрын

  Hello my friend, where are you based in Northern Ireland? Would you be able to fit the passenger front airbag on a q7 as i can't get a mechanic at all to fit it

• 
  @bumbleshufflesdiy59084 ай бұрын

  I am very sorry but I am not a mechanic and would not be able to fit this for you. I Hope that you get sorted and my apologies that I cannot be of more help.