This is very nice - did you have to cut into the box room in order to build the stair case to the loft? Thanks
@barnetloftcoАй бұрын
Hi, there was no need to cut into box room. Please, Let us know if you will need loft plans or quote for your loft project. Best, the Barnet Loft Company.
@ukjingАй бұрын
@@barnetloftco thanks for getting back to me. Thinking of doing the loft but don't want to cut into the box room. Any way that I check if I have enough space?
Ай бұрын
Big diarrhea
@user-eg8ym7dg5jАй бұрын
lovely bit of slate hanging on the rear of the dormer but the 4 inch soil pipe looks awful, pity it could not have been run internally,
@fredmercury1314Ай бұрын
My attic is f-f-freezing cold in winter, can I put a hot water tank up there?
@marloncatamora2761Ай бұрын
Wow ❤
@Jumbjetsky2 ай бұрын
Hi. What about making a hole in the gable wall a bit bigger than the steel beam, and sliding the steel beem through the gable wall by placing the on end on a rolling table? In the case you have shown the width of the loft is larger than the length and you had no wood members in the way.
@mohammadkhan47232 ай бұрын
Hello, i need a quotation for my area footage please
@YJBANJO2 ай бұрын
This is phenomenal; amazing video!
@jcllp86433 ай бұрын
Looks really great, don’t know if anyone can do this job in Ireland😂
@noodleviewer3 ай бұрын
Where did you put the stairs from first floor to loft?
@naijamanuk3 ай бұрын
Looks great but Would have been nice to see the interior before the staircase was installed.
@plummetplum4 ай бұрын
Nice.
@elliejake114 ай бұрын
Smart job that👍
@plummetplum5 ай бұрын
Great job 👏
@barnetloftco4 ай бұрын
thanks !
@plummetplum5 ай бұрын
How wide did the opening have to be to swing that into place?
@barnetloftco4 ай бұрын
just a bit wider than the length of the beam
@livechangingmoney5 ай бұрын
Nice job
@barnetloftco4 ай бұрын
Thank you! Cheers!
@Kryptic.3525 ай бұрын
What were the dimensions of the rooms that you built?
@barnetloftco5 ай бұрын
hi, bigger bedroom is approx 3x4meters
@strawberryicecream7967 ай бұрын
Can I ask, did you need planning permission or advice from a structural engineer to install the attic stairs?
@barnetloftco4 ай бұрын
Hi, loft was build under permitted development. Structural engineer design was submitted to council and inspected by council.
@strawberryicecream7967 ай бұрын
Can I ask, did you need planning permission or advice from a structural engineer to install the attic stairs?. Thanks
@barnetloftco4 ай бұрын
hello, loft was done under permitted development, no planning permission required. yes structural design is required.
@strawberryicecream7964 ай бұрын
@@barnetloftco Many thanks for taking the time to reply 😊
@barnetloftco4 ай бұрын
better LATTE than never ☕@@strawberryicecream796
@Drmoiz7868 ай бұрын
how much it cost
@lucwrennall92488 ай бұрын
Is that small space at the top of the stairs Legal?should it not be at least 700mm x 700mm
@daledmc8 ай бұрын
How much ball park would that cost ?
@markmaclean68558 ай бұрын
Very skilled, a miracle you can train people every week to replace the ones falling off, fall from heights are the #1 killer of workers, cigarettes never killed so many, shame full to broadcast such sh*t
@umarch31389 ай бұрын
How much it’s cost?
@lazygardens10 ай бұрын
TINY bedrooms, but the natural light is wonderful.
@nayanpatel530411 ай бұрын
Hi. Great job. What is the ceiling height?
@nayanpatel530411 ай бұрын
Hi what it the ceiling height in the loft bedroom?
@ayubbapu33 Жыл бұрын
So many inspectors & HSE inspectors watching this video - done many dormers I think lads have done well !
@farhanhussain3636 Жыл бұрын
How much this size loft cost?
@HSwanny5 ай бұрын
£59,995
@quophiayerebi Жыл бұрын
Do u need planning permission for this?
@Pytho_n5 ай бұрын
Of course
@darda5654 Жыл бұрын
*PromoSM*
@noorhussain5941 Жыл бұрын
mate how much for all this
@nayanpatel5304 Жыл бұрын
Amazing. Where did you purchase the tiles?
@moons4768 Жыл бұрын
I thought there always some kind of steel beam need to be used for building regulations. Quite surprised by how two initial wooden posts took all that weight.
@barnetloftco Жыл бұрын
Hi, there is a steel ridge beam as designed by structural engineer. Head beam above dormer windows is supported by 3x double posts during construction.
@lockdownlife3.028 Жыл бұрын
What does the ‘orange stuff’ do?
@barnetloftco Жыл бұрын
DITRA mat uncouples the covering from the substrate and neutralises stresses between the substrate and the tile covering that result from various deformations. It also bridges tension cracks from the substrate and prevents them from affecting the tile covering. Ditra also provides waterproofing & vapour pressure equalisation for underside moisture
@mattteekel8237 Жыл бұрын
So many extra stepss
@WarrensRandomAndWeirdVideos Жыл бұрын
First of why does the us plug have uk coloured cable
@wiliwilo Жыл бұрын
No they dont5
@BrianLough Жыл бұрын
That's a eu plug
@puffacookie5249 Жыл бұрын
Never ever seen anyone use a crimp tool backwards
@ghostface7300 Жыл бұрын
Why does the loft need a seperate fuse board?
@bigloftlondon1291 Жыл бұрын
Hi, there was no space in existing consumer unit for additional loft sockets / lights circuits.
@benalexlily Жыл бұрын
I all ready had cables up in mine so jumped off them loft cost me 20k finished did it my self
@gachalover6270 Жыл бұрын
By the way your bathroom looks so beautiful I love it
@jonodunn2592 Жыл бұрын
Nice job but why isn’t the skirting board laid on top of the laminate the bead trims look terrible
@Mids1970 Жыл бұрын
good work but for the love of God where's your fall protection guys?
@bigjak7358 Жыл бұрын
U think i cud squeeze a boxing bag in their ,? never to old for a boxing bag
@bigjak7358 Жыл бұрын
I should of checked the .... seee if a new ford inter light goes off when u lock it . Has he been blazing with charlie to forget that ? No
@bigjak7358 Жыл бұрын
The 2 balls the ladders the drop on the flags when really there was no need it was a flat back truck.
@bigjak7358 Жыл бұрын
Quite clever to send a link to cause tension i must admit . Hats off.
@kimbo1966 Жыл бұрын
Rough cost ?
@emmac9318 Жыл бұрын
What was the total cost please? (supplies & labour)
@higgins340s Жыл бұрын
Loving the guy with the chainsaw trimming the ends off, with his mate underneath holding onto the offcut while he's cutting and with no edge protection. I can see how you get these things built so quickly now. Hope your employees appreciate your commitment to health and safety in the workplace.
@tepidbudgie Жыл бұрын
I wouldn't consider what he's doing to be anymore dangerous than just simply working in the trade itself. A good worker knows how to support the offcut material without binding the cutters blade.
Пікірлер
nice
This is very nice - did you have to cut into the box room in order to build the stair case to the loft? Thanks
Hi, there was no need to cut into box room. Please, Let us know if you will need loft plans or quote for your loft project. Best, the Barnet Loft Company.
@@barnetloftco thanks for getting back to me. Thinking of doing the loft but don't want to cut into the box room. Any way that I check if I have enough space?
Big diarrhea
lovely bit of slate hanging on the rear of the dormer but the 4 inch soil pipe looks awful, pity it could not have been run internally,
My attic is f-f-freezing cold in winter, can I put a hot water tank up there?
Wow ❤
Hi. What about making a hole in the gable wall a bit bigger than the steel beam, and sliding the steel beem through the gable wall by placing the on end on a rolling table? In the case you have shown the width of the loft is larger than the length and you had no wood members in the way.
Hello, i need a quotation for my area footage please
This is phenomenal; amazing video!
Looks really great, don’t know if anyone can do this job in Ireland😂
Where did you put the stairs from first floor to loft?
Looks great but Would have been nice to see the interior before the staircase was installed.
Nice.
Smart job that👍
Great job 👏
thanks !
How wide did the opening have to be to swing that into place?
just a bit wider than the length of the beam
Nice job
Thank you! Cheers!
What were the dimensions of the rooms that you built?
hi, bigger bedroom is approx 3x4meters
Can I ask, did you need planning permission or advice from a structural engineer to install the attic stairs?
Hi, loft was build under permitted development. Structural engineer design was submitted to council and inspected by council.
Can I ask, did you need planning permission or advice from a structural engineer to install the attic stairs?. Thanks
hello, loft was done under permitted development, no planning permission required. yes structural design is required.
@@barnetloftco Many thanks for taking the time to reply 😊
better LATTE than never ☕@@strawberryicecream796
how much it cost
Is that small space at the top of the stairs Legal?should it not be at least 700mm x 700mm
How much ball park would that cost ?
Very skilled, a miracle you can train people every week to replace the ones falling off, fall from heights are the #1 killer of workers, cigarettes never killed so many, shame full to broadcast such sh*t
How much it’s cost?
TINY bedrooms, but the natural light is wonderful.
Hi. Great job. What is the ceiling height?
Hi what it the ceiling height in the loft bedroom?
So many inspectors & HSE inspectors watching this video - done many dormers I think lads have done well !
How much this size loft cost?
£59,995
Do u need planning permission for this?
Of course
*PromoSM*
mate how much for all this
Amazing. Where did you purchase the tiles?
I thought there always some kind of steel beam need to be used for building regulations. Quite surprised by how two initial wooden posts took all that weight.
Hi, there is a steel ridge beam as designed by structural engineer. Head beam above dormer windows is supported by 3x double posts during construction.
What does the ‘orange stuff’ do?
DITRA mat uncouples the covering from the substrate and neutralises stresses between the substrate and the tile covering that result from various deformations. It also bridges tension cracks from the substrate and prevents them from affecting the tile covering. Ditra also provides waterproofing & vapour pressure equalisation for underside moisture
So many extra stepss
First of why does the us plug have uk coloured cable
No they dont5
That's a eu plug
Never ever seen anyone use a crimp tool backwards
Why does the loft need a seperate fuse board?
Hi, there was no space in existing consumer unit for additional loft sockets / lights circuits.
I all ready had cables up in mine so jumped off them loft cost me 20k finished did it my self
By the way your bathroom looks so beautiful I love it
Nice job but why isn’t the skirting board laid on top of the laminate the bead trims look terrible
good work but for the love of God where's your fall protection guys?
U think i cud squeeze a boxing bag in their ,? never to old for a boxing bag
I should of checked the .... seee if a new ford inter light goes off when u lock it . Has he been blazing with charlie to forget that ? No
The 2 balls the ladders the drop on the flags when really there was no need it was a flat back truck.
Quite clever to send a link to cause tension i must admit . Hats off.
Rough cost ?
What was the total cost please? (supplies & labour)
Loving the guy with the chainsaw trimming the ends off, with his mate underneath holding onto the offcut while he's cutting and with no edge protection. I can see how you get these things built so quickly now. Hope your employees appreciate your commitment to health and safety in the workplace.
I wouldn't consider what he's doing to be anymore dangerous than just simply working in the trade itself. A good worker knows how to support the offcut material without binding the cutters blade.
Big baby