Пікірлер

• 
  @TonyGrant.2 күн бұрын

  I always print the guns vertically in spiral mode - very slowly.

• 
  @FreddyTheFrog.3 күн бұрын

  Bruh I wish it had ball joints

• 
  @_w_w_4 күн бұрын

  DO NOT BUY. This line also has a toothbrush attachment. The entire Multishape line is junk. They are jack of all trades and master of none. You would be MUCH better served by buying an entry level model of Oral B or Sonicare for toothbrush...and entry level of Norelco or Braun, for travel which is what this product is targeting for. The newer models of those products are very cheap. Combined, it's only 1/5 cost of this Panasonic JUNK.

• 
  @CYBERJAM01-_-6 күн бұрын

  Nice review Ross. My A8 was delivered today and follows on from the A7 I'm using now. Also have a GEEKOM 16" portable monitor on the way. The vRAM capacity should be actively self managed as you discuss however more detailed live monitoring is required to confirm. We can all place a little pressure on GEEKOM & AMD to update the BIOS to allow product owners direct vRAM control. Current BIOS is far too basic for enthusiasts such as gamers & graphics professionals. Also, let's not forget the option for using eGPUs to crush mediocre graphics performance expectations. I'm already designing a prototype "peripheral" unlike anything currently available. It's mini-PC specific and will add so much more capability & performance that traditional gaming/graphics PCs could soon only be offering more "size, price & RGB lighting".

• 
  @gtampako6 күн бұрын

  Have you noticed any thermal throttling?

• 
  @corerosstech6 күн бұрын

  No issues with thermal throttling but I am not using it with those kind of extended loads, check more reviews with different workloads for more info

• 
  @Jamie-6667 күн бұрын

  Thanks for the review!

• 
  @MK-xc9to7 күн бұрын

  " low VRAM " with an APU can be a Setting in the Driver or UEFI which limits the ammount of System Ram the APU is allowed to use . If there are only 16 GB of Main Memory then Windows may limit as well .

• 
  @corerosstech7 күн бұрын

  There was no low vram. Game was running great with settings and apu was able to get all the vram it needed. Only the vulkan version had the warning so I believe it to be a software issue

• 
  @itsmuterfree75918 күн бұрын

  how much for it

• 
  @leechurchill51828 күн бұрын

  This or the minisforum UM790 ? For retro gaming

• 
  @KissofDeath638 күн бұрын

  why hdmi 2.0

• 
  @homerjones34908 күн бұрын

  The standard should be at least 2 x 2.5gb ports and 2 x PCIe-Gen 4 slots, so this model fails on two grounds the, second one is a deal breaker as one can add a USB ethernet dongle.

• 
  @raymondx1379 күн бұрын

  It's a shame they don't offer a barebone!

• 
  @kutayfunk9 күн бұрын

  Thank you

• 
  @OLIVE_MANN14 күн бұрын

  Uiop

• 
  @daxton746214 күн бұрын

  *Promosm* 💘

• 
  @bilaltahir153717 күн бұрын

  This looks awesome.

• 
  @ErnestBegley-nl6sb24 күн бұрын

  I want one!😢

• 
  @ilaigibbons560826 күн бұрын

  qwerty

• 
  @ljroberts8327 күн бұрын

  I printed this exact model last year. one of my favourite prints.

• 
  @cookiecook428 күн бұрын

  Part 2 please!! Such a good vid!

• 
  @AFHome-qf5pn29 күн бұрын

  Nice👍🏻

• 
  @Alex-ds4vyАй бұрын

  Seen this show one of my favorites, the looks so awesome

• 
  @ssmoke95Ай бұрын

  I haven't seen Star wars and don't wanna watch it but The Ship looks cool that you made.

• 
  @goku_dunker_420Ай бұрын

  Honestly for anything other than gaming or 3D art, this looks like a really cute thing to have. Sadly gaming is all I do on a computer lol

• 
  @epifaniajimenez266Ай бұрын

  Sencillo,te atacan ? Pues respondes no tienes opciones!

• 
  @tremollution8904Ай бұрын

  Nice review

• 
  @corerosstechАй бұрын

  Thank you

• 
  @georgeashley7451Ай бұрын

  hi there that is awesome i was wondering if you could do the same ship but with the uss kittyhawk a friend of mine served on that ship and i want to make one for him...

• 
  @corerosstechАй бұрын

  Link in the description goes to the 3D files and original designer. They maybe able to help you out with that

• 
  @tomasacunatАй бұрын

  TKL stands for tenkeyless, it’s the size of the keyboard

• 
  @vipervidsgamingplus5723Ай бұрын

  I printed out The Harlot, a derringer pistol, in purple PETg-CF. Really complicated but I plan to assemble it as a display model only. It looks great in the matte purple I chose.

• 
  @user-hi5sm5jb1e2 ай бұрын

  Very cool 😂🎉

• 
  @CREEpeRexpLODDE2 ай бұрын

  Best of luck man, it looks incredible ❤

• 
  @DKFel1x2 ай бұрын

  Nice video, like always :)

• 
  @fab365_official2 ай бұрын

  Wow! Awesome print and video of my design! Thank you~

• 
  @corerosstech2 ай бұрын

  Love your work

• 
  @user-lv1if4cl7j2 ай бұрын

  👍

• 
  @jasonstaley70512 ай бұрын

  What do you think you'd have to scale this up/down to fit a Lego guy😂

• 
  @corerosstech2 ай бұрын

  Much bigger I would assume 😂

• 
  @jasonstaley70512 ай бұрын

  I measured the steering wheel in mm, compared it to the model, saw it had to be over 300% bigger, and said "nah, I'm good."@@corerosstech

• 
  @jasonstaley70512 ай бұрын

  Hey, can you see if you can make this Water Buoyant? That'd be awesome.

• 
  @corerosstech2 ай бұрын

  It will definitely float as its most hollow but maybe would need some weight in the keel to keep it upright

• 
  @jasonstaley70512 ай бұрын

  I'd assume so.@@corerosstech

• 
  @RedGentlemanPrivate2 ай бұрын

  That's a really useful prints. I have a random tool box with all my mini painting tools and colors but it's all just jumbled up in there so will probably try printing some of these. Also the voice over you did sounds really good 👍

• 
  @itsmemrc99492 ай бұрын

  sadly I have been having issues with the print specifically the springs and parts files where for the spring the edges just pop up on like layer 5 and mess it all up and on the caps in the parts file it just starts spewing PLA. Have you got any fixes or advice to help, and thank you love the content

• 
  @corerosstech2 ай бұрын

  I didn't have any issues with the stl's I downloaded, all came out without any issue

• 
  @crazzzyization2 ай бұрын

  Another stupid K1 user

• 
  @FlameGuy233 ай бұрын

  I love this revolver imma 3d print it but i have a questiion before, ¿does it shoots?

• 
  @corerosstech3 ай бұрын

  Nope

• 
  @FlameGuy232 ай бұрын

  oh ok thx btw

• 
  @bfxrusher61023 ай бұрын

  0.6 Nozzel are really great and a neat upgrade to the printing time. Additionally the qualityloss is not that high.

• 
  @TheDeeStain3 ай бұрын

  Interesting on your experience on the white. I dislike black because imperfections can be seen easier. I printed a fully worked AR-15 with Hyper PLA white. Not sure if you just got a bad one. I compared against polymaker and esun and for me hyper pla was the winner for speed.

• 
  @kstringer243 ай бұрын

  Thanks for the review. Where did you get the tie fighter?

• 
  @corerosstech3 ай бұрын

  Got a dedicated video on the tie fighter here: kzread.info/dash/bejne/eKJqlLNvqNHSYMo.html and link to the free model is in its description

• 
  @MrZombietoes3 ай бұрын

  Is that a pod swab?!

• 
  @alexme65213 ай бұрын

  first

• 
  @beanman-dq8quАй бұрын

  nuh uh

• 
  @bfxrusher61023 ай бұрын

  If Kevin from the movie Home Alone had a printer and time, that could have been an option for him. ⛑

• 
  @yicongfang84353 ай бұрын

  The audio though💀💀💀

• 
  @bryeif3 ай бұрын

  Couldn’t agree more! I have the E3 S1 Pro too and I’m finding the only drawback is time…. The new modern printers are just way faster! I tested the time difference on the same exact settings between my E3 S1 pro and a friends bambulab P1S and the difference was 3 days on my printer 1 day on his.

• 
  @JoaoLeandroPachecoRibeiro3 ай бұрын

  Download free????

• 
  @corerosstech3 ай бұрын

  It's a paid model by the original designer and link is in the description of this video, its cheap though

• 
  @suscriptor-xo6es3 ай бұрын

  Donde puedo conseguir ese modelo? Un like merecido

• 
  @corerosstech3 ай бұрын

  Description includes link