Mr. Rexu Have A Knife Day is a knife/gear review channel. It is going over my collection, going to knife shows and talking to collectors about what they like, are looking for and what is carried in their pockets.
Odkw!! Glad to see their booth at bs24. Thank you!
@haveaknifeday10 сағат бұрын
It was also great to be able to meet them for the first time.
@haveaknifeday10 сағат бұрын
You are very welcome 🙏🏼
@Tusk200112 сағат бұрын
You didn’t axe him how to get a hold of him? I think…..
@haveaknifeday12 сағат бұрын
I knew I forgot to axe him something. It hacks me up when I do that.
@Tusk20015 сағат бұрын
@@haveaknifeday come on! Get a handle on it! Don’ give yourself a hatchet job over it!
@haveaknifeday3 сағат бұрын
@Tusk2001 you know what they say, “there are only two certainties in life death and axes.
@Tusk20018 минут бұрын
@@haveaknifeday to quote Bill Murray in “Stripes,” “That’s the axe jack!”
@jessicae.s.340Күн бұрын
Looks identical to my Cold Steel Trailmaster
@haveaknifeday10 сағат бұрын
I really wish that they’d make more of their “heritage” series again.
@LairdDavidsonКүн бұрын
Okay, the sheath isn't as good but is the knock off knife good or not? Also what's the price difference? You can buy a knock off for pocket change from the Far East
@haveaknifedayКүн бұрын
I sent mine back, I will purchased mine directly from Gerber. They sell it for $90 on the Amazon they sell it from 82-89.99. Now, if the knockoffs want to sell a knife they shouldn’t steal the name and misrepresent themselves. If you haven’t noticed I am looking to support American made as much as possible, especially when it comes to knives. I want Americans to keep their jobs.
@Tusk2001Күн бұрын
Omoshiroides? I know i did! (Hope i got that right) love his stuff! One of my bucket list things is to return to Japan and visit a friebd from HS (exchange student) who is now kensai, if i do, I also want to go to Seki and now will stop by his shop!
@TheSogGruntКүн бұрын
I love KIKU Matsuda. Not just as one of the world’s best knife makers but as a humble human being.Thank you for sharing this.Incredible craftsmanship ❤️😉🔪👍
@Tusk20012 күн бұрын
I LIKE IT!!! I went to their website and looked at their other products. They have the uses 45 which is bigger and I like it. Them looking at their site, I saw the FC series. I know I don’t do it as much as I used to, but that would be a great knife to have hiking and camping. That FC series has a actual bow divot in it. Divot in it, I am a port and I don’t even know it! I’m seriously considering trying to save up and get one of those. I really liked it. It’s also S35VN which is a great steel because it means that has better corrosion resistance and it is one of my favorite steals! Don’t get me wrong. I would love to get one in magnacut, but they don’t offer that.
@charlietaroni16072 күн бұрын
where can i get that sheath?
@haveaknifeday2 күн бұрын
At that time I got that one from Redhill sheaths but now I get them from black bear custom kydex.
@haveaknifeday2 күн бұрын
blackbearck.com
@TrashPandaandCookieCat3 күн бұрын
Nice job, Caleb.
@Tusk20013 күн бұрын
Love the dagger & swords! Knice size daggers, wonder if they could be boar hunting pattern
@preparacaofranco91574 күн бұрын
Muito bom
@sprinkleddonuts60944 күн бұрын
I want the new Ultratech, but double serrated.
@Tusk20014 күн бұрын
HOOOAH,
@adods98245 күн бұрын
I want that blade in the screen shot!! The chopper with the ring guard, what's it called please? 😁👍🇦🇺
@haveaknifeday5 күн бұрын
The Lilith
@haveaknifeday5 күн бұрын
Doesn’t seem to be released as of yet.
@adods98245 күн бұрын
I want that blade in the screen shot!!
@haveaknifeday5 күн бұрын
It’s something else
@Tusk20015 күн бұрын
Very oriental….. Even his logo look like a Tsuba on a Daisho I have from James Williams called the wave. Also, his blades are very Hissatsu like. This is actually a good thing as the CRKT collab is not made from as good a steel. I like this very much. Y’know, you gotta stop making me want more knives!
@SpaceThumper5 күн бұрын
Uh. Where are the "tried-and-true" Ka-Bar knives that we all know and love? I think i saw them on the right hand side at the end.
@haveaknifeday5 күн бұрын
@@SpaceThumper they are really pressing their new lines hoping that they will earn the title.
@hardusehobby6 күн бұрын
Not bad but if they bring back the Rukus 610 I will buy my first Benchmade
@haveaknifeday6 күн бұрын
There are several blades that should make another round 👍🏼
@Night52256 күн бұрын
Once you get used to it being a bit big (could not phrase any less dirty), it’s a great everyday carry. I have a straight edge no-corkscrew that I’ve grown pretty fond of.
@haveaknifeday6 күн бұрын
@@Night5225 I’m a paratrooper, my military “influenced” sense of humor has a lot of innuendo 🤣
@MegaFrank19606 күн бұрын
That hurt so much I couldn't even watch...... lol
@haveaknifeday6 күн бұрын
We appreciate the effort though.
@dilidofen63617 күн бұрын
I acctually live in holmedal in Norway where the helle factory is and i am so happy these people get internastional recognition. Everyone i know who works there are very pasionate and nice. And of course the knifes are of the outmost quality.
@haveaknifeday7 күн бұрын
I would love to have the opportunity to travel there and do a video at their facility. Who knows maybe go out and do some bushcraft?
@orrinfrance-eq8uf7 күн бұрын
Hi...they got me...got a fake one..but any how..what's the story with the bloody small hand axe 🪓 in corner on floor 😮...where is the cat.. 🤔
@haveaknifeday7 күн бұрын
The cat 🐈⬛ is surveying his domain, returning for daily tribute.
@Tusk20017 күн бұрын
Really liked his sgian dubh knives! Thanks for sharing
@haveaknifeday7 күн бұрын
You are welcome 🙏🏼
@CthonicSoulChicken7 күн бұрын
Walter Brend is a legend. I'm so glad to see him still alive and making knives. I'm curious about how many years his waiting list is. Well--2 1/2 years now! What a beast. Good man.
@mehmetkupeli20738 күн бұрын
How much is that knife?
@haveaknifeday8 күн бұрын
I got it off of eBay from only SOG for 479 in 2022
@yourlastfoe8 күн бұрын
Any idea when the knife catalog will be available again?
@kimngo81728 күн бұрын
❤❤❤
@haveaknifeday8 күн бұрын
@@kimngo8172 what a treat to be able to see you again after such a long time. Made my day 🫡👍🏼
@user-fq5kg6gk1g8 күн бұрын
The SOG Tiger shark is John Locke Knife in the Tv Series LOST
@haveaknifeday8 күн бұрын
That’s a fantastic placement
@johnovanic95608 күн бұрын
Bastinelli has always had some interesting Marshall blades. What really caught my eye was that double shoulder hanger. I like the idea that it's Universal and you could hang anything on there
@haveaknifeday8 күн бұрын
It could be very useful for several applications.
@pistolpete49919 күн бұрын
just out of curiosity, what did you pay for it if you don’t mind that telling. I just bought one and I wanna see if I overpaid or around the ballpark
@haveaknifeday9 күн бұрын
@@pistolpete4991 $500 in 2022
@pistolpete49919 күн бұрын
@@haveaknifeday ok thank you.
@haveaknifeday8 күн бұрын
@pistolpete4991 🫡👍🏼
@Tusk200111 күн бұрын
Now I know what I want for Hanukkah!
@haveaknifeday11 күн бұрын
A microtech otf dreidel
@Tusk200111 күн бұрын
@@haveaknifeday now that’s a Hanukkah present!!!!
@isaacs_knives_and_knowledge12 күн бұрын
Cool news about the V-42!
@haveaknifeday12 күн бұрын
Indeed
@Tusk200112 күн бұрын
So…. Did you get the belt sheath with your Case?
@haveaknifeday12 күн бұрын
I had one at home already.
@elijahdimke535313 күн бұрын
I have a non serrated tiger shark, it’s surprisingly a great bushcrafter.
@haveaknifeday13 күн бұрын
@@elijahdimke5353 they don’t make them like that anymore. Fine blades.
@elijahdimke535312 күн бұрын
@@haveaknifeday I believe I have a prototype from my research, it’s the exact knife and sheath you have but unserrated, I’m not too sure.
@wilcoxtactical371614 күн бұрын
Looks like your complete biased. None of the differences have any effect on the quality. Same shitn you're a fool. Ill take the $10 knockoff over the overpriced genuine
@Tusk200114 күн бұрын
Aknother knice knife upload!
@haveaknifeday14 күн бұрын
@@Tusk2001 thank you very much sir
@aaronnaylor5915 күн бұрын
Very nice knife. Functional art.
@nathalielanoir424615 күн бұрын
That knife's awesome! 👍
@Tusk200115 күн бұрын
Cool! Knice!
@StuartSmithHandForgedKNives16 күн бұрын
very cool
@haveaknifeday16 күн бұрын
Damn, that damn microphone cover was visible.
@johnovanic956016 күн бұрын
That was a beautiful piece of work. If you did have to use that knife for self-defense your antagonist would just apologize and call it a day😮
@haveaknifeday16 күн бұрын
@@johnovanic9560 sir! You’ve stabbed me! Wait!? That’s absolutely beautiful and what a privilege to have been pierced by such a work of art.
@Tusk200116 күн бұрын
Very interesting! Things I never knew about the Bowie knife! I’ve seen him before, just didn’t know from where.
@slicknick33217 күн бұрын
Love my all-titanium Mission Knives MPU! Picked it up a few years ago; super lightweight and no rust worries. Blue paracord-wrapped handle too. 😎👍
@haveaknifeday17 күн бұрын
@@slicknick332 very cool. She’s doing a great job.
@octhedarkside17 күн бұрын
Awesome
@TheLionsDenBoxing17 күн бұрын
That’s one ugly tool. The knife is not bad looking though.😂
@haveaknifeday17 күн бұрын
@@TheLionsDenBoxing both get the job done 😉
@TheLionsDenBoxing17 күн бұрын
@@haveaknifeday 😆 yes sir. Take care, buddy.
@Tuffer1217 күн бұрын
A girl that gets it! Awesome !
@beck421817 күн бұрын
Mission is still around?!
@haveaknifeday17 күн бұрын
@@beck4218 she’s carrying the torch
@Tusk200117 күн бұрын
What a great story! What a great legacy! And to see someone of her age doing this is tremendous! I understand the A2 tool steel, but in all titanium knife interests me. Understand the use of a non-magnetic knife for EOD. I also understand it for diving purposes (especially in saltwater). But it is a softer metal and according to her own website, the hardness is only HRC 47. I’m wondering about Ed attention. Sharpening should be easier, but I would think that the edge retention would be less.😮
Пікірлер
Odkw!! Glad to see their booth at bs24. Thank you!
It was also great to be able to meet them for the first time.
You are very welcome 🙏🏼
You didn’t axe him how to get a hold of him? I think…..
I knew I forgot to axe him something. It hacks me up when I do that.
@@haveaknifeday come on! Get a handle on it! Don’ give yourself a hatchet job over it!
@Tusk2001 you know what they say, “there are only two certainties in life death and axes.
@@haveaknifeday to quote Bill Murray in “Stripes,” “That’s the axe jack!”
Looks identical to my Cold Steel Trailmaster
I really wish that they’d make more of their “heritage” series again.
Okay, the sheath isn't as good but is the knock off knife good or not? Also what's the price difference? You can buy a knock off for pocket change from the Far East
I sent mine back, I will purchased mine directly from Gerber. They sell it for $90 on the Amazon they sell it from 82-89.99. Now, if the knockoffs want to sell a knife they shouldn’t steal the name and misrepresent themselves. If you haven’t noticed I am looking to support American made as much as possible, especially when it comes to knives. I want Americans to keep their jobs.
Omoshiroides? I know i did! (Hope i got that right) love his stuff! One of my bucket list things is to return to Japan and visit a friebd from HS (exchange student) who is now kensai, if i do, I also want to go to Seki and now will stop by his shop!
I love KIKU Matsuda. Not just as one of the world’s best knife makers but as a humble human being.Thank you for sharing this.Incredible craftsmanship ❤️😉🔪👍
I LIKE IT!!! I went to their website and looked at their other products. They have the uses 45 which is bigger and I like it. Them looking at their site, I saw the FC series. I know I don’t do it as much as I used to, but that would be a great knife to have hiking and camping. That FC series has a actual bow divot in it. Divot in it, I am a port and I don’t even know it! I’m seriously considering trying to save up and get one of those. I really liked it. It’s also S35VN which is a great steel because it means that has better corrosion resistance and it is one of my favorite steals! Don’t get me wrong. I would love to get one in magnacut, but they don’t offer that.
where can i get that sheath?
At that time I got that one from Redhill sheaths but now I get them from black bear custom kydex.
blackbearck.com
Nice job, Caleb.
Love the dagger & swords! Knice size daggers, wonder if they could be boar hunting pattern
Muito bom
I want the new Ultratech, but double serrated.
HOOOAH,
I want that blade in the screen shot!! The chopper with the ring guard, what's it called please? 😁👍🇦🇺
The Lilith
Doesn’t seem to be released as of yet.
I want that blade in the screen shot!!
It’s something else
Very oriental….. Even his logo look like a Tsuba on a Daisho I have from James Williams called the wave. Also, his blades are very Hissatsu like. This is actually a good thing as the CRKT collab is not made from as good a steel. I like this very much. Y’know, you gotta stop making me want more knives!
Uh. Where are the "tried-and-true" Ka-Bar knives that we all know and love? I think i saw them on the right hand side at the end.
@@SpaceThumper they are really pressing their new lines hoping that they will earn the title.
Not bad but if they bring back the Rukus 610 I will buy my first Benchmade
There are several blades that should make another round 👍🏼
Once you get used to it being a bit big (could not phrase any less dirty), it’s a great everyday carry. I have a straight edge no-corkscrew that I’ve grown pretty fond of.
@@Night5225 I’m a paratrooper, my military “influenced” sense of humor has a lot of innuendo 🤣
That hurt so much I couldn't even watch...... lol
We appreciate the effort though.
I acctually live in holmedal in Norway where the helle factory is and i am so happy these people get internastional recognition. Everyone i know who works there are very pasionate and nice. And of course the knifes are of the outmost quality.
I would love to have the opportunity to travel there and do a video at their facility. Who knows maybe go out and do some bushcraft?
Hi...they got me...got a fake one..but any how..what's the story with the bloody small hand axe 🪓 in corner on floor 😮...where is the cat.. 🤔
The cat 🐈⬛ is surveying his domain, returning for daily tribute.
Really liked his sgian dubh knives! Thanks for sharing
You are welcome 🙏🏼
Walter Brend is a legend. I'm so glad to see him still alive and making knives. I'm curious about how many years his waiting list is. Well--2 1/2 years now! What a beast. Good man.
How much is that knife?
I got it off of eBay from only SOG for 479 in 2022
Any idea when the knife catalog will be available again?
❤❤❤
@@kimngo8172 what a treat to be able to see you again after such a long time. Made my day 🫡👍🏼
The SOG Tiger shark is John Locke Knife in the Tv Series LOST
That’s a fantastic placement
Bastinelli has always had some interesting Marshall blades. What really caught my eye was that double shoulder hanger. I like the idea that it's Universal and you could hang anything on there
It could be very useful for several applications.
just out of curiosity, what did you pay for it if you don’t mind that telling. I just bought one and I wanna see if I overpaid or around the ballpark
@@pistolpete4991 $500 in 2022
@@haveaknifeday ok thank you.
@pistolpete4991 🫡👍🏼
Now I know what I want for Hanukkah!
A microtech otf dreidel
@@haveaknifeday now that’s a Hanukkah present!!!!
Cool news about the V-42!
Indeed
So…. Did you get the belt sheath with your Case?
I had one at home already.
I have a non serrated tiger shark, it’s surprisingly a great bushcrafter.
@@elijahdimke5353 they don’t make them like that anymore. Fine blades.
@@haveaknifeday I believe I have a prototype from my research, it’s the exact knife and sheath you have but unserrated, I’m not too sure.
Looks like your complete biased. None of the differences have any effect on the quality. Same shitn you're a fool. Ill take the $10 knockoff over the overpriced genuine
Aknother knice knife upload!
@@Tusk2001 thank you very much sir
Very nice knife. Functional art.
That knife's awesome! 👍
Cool! Knice!
very cool
Damn, that damn microphone cover was visible.
That was a beautiful piece of work. If you did have to use that knife for self-defense your antagonist would just apologize and call it a day😮
@@johnovanic9560 sir! You’ve stabbed me! Wait!? That’s absolutely beautiful and what a privilege to have been pierced by such a work of art.
Very interesting! Things I never knew about the Bowie knife! I’ve seen him before, just didn’t know from where.
Love my all-titanium Mission Knives MPU! Picked it up a few years ago; super lightweight and no rust worries. Blue paracord-wrapped handle too. 😎👍
@@slicknick332 very cool. She’s doing a great job.
Awesome
That’s one ugly tool. The knife is not bad looking though.😂
@@TheLionsDenBoxing both get the job done 😉
@@haveaknifeday 😆 yes sir. Take care, buddy.
A girl that gets it! Awesome !
Mission is still around?!
@@beck4218 she’s carrying the torch
What a great story! What a great legacy! And to see someone of her age doing this is tremendous! I understand the A2 tool steel, but in all titanium knife interests me. Understand the use of a non-magnetic knife for EOD. I also understand it for diving purposes (especially in saltwater). But it is a softer metal and according to her own website, the hardness is only HRC 47. I’m wondering about Ed attention. Sharpening should be easier, but I would think that the edge retention would be less.😮
I wonder how a San mai set up would work?
Great interview
🫡🙏🏼