I bought mine last week, I definitely add more soap then that. Works great.
@RodrigoSilva-yx8rnАй бұрын
For a better result and more professional, I recommend you sand it before polishing.. 600 grid Dry 400 dry 400 wet 600 wet 800 wet 1000 wet 1500 wet 2000 wet 2500 wet 3000 wet
@1dash133Ай бұрын
FYI. 1. There are at least two submodels of this Model 1814E-B dual action orbital washer. They are not the same. Do a KZread search for "Teardown: which Bauer DA polisher from Harbor Freight is better?" to see the difference. 2. Many owners note that the bearing grease used to assemble this model is of poor quality. It is suggested that the first thing new owners do with their new Harbor Freight polisher is to change out the grease. Do a KZread search for "Harbor Freight polisher upgrade" for how-to instructions. 3. Many owners choose to replace the 6" backing plate with a 5" backing plate in order to reduce vibration, improve torque, cooler operation, and for better handling in small or curved surface areas. When purchasing a new backing plate, make sure that you order one with the correct thread size (5/16 in- 24 UNF).
@pacejeremiah44172 ай бұрын
Thank you, been fighting this thing.
@modestoappl.83992 ай бұрын
Thank you sir!!!
@paulm2832 ай бұрын
Good job! I would coat that with protectant 😂
@shiddy.3 ай бұрын
these are $40 right now, I'm going to get one tomorrow ... looks really good and I've been happy with the long throw version
@monasultan57554 ай бұрын
Hello my friend There is a car in Nc Concord that I want to bid on, but I am afraid of the rust on the chassis. I want someone to photograph the car from below. Thank you very much.
@MarkCoreyCopartAdventures4 ай бұрын
Thanks for your comment. Actually easier than most think. Just time and knowledge needed!
@LordTheodore044 ай бұрын
looks like a lot of work ahead
@MarkCoreyCopartAdventures4 ай бұрын
Thanks! I enjoy the work.
@TheE46Guy4 ай бұрын
This is a lot of work...But well done! Looks great. Dropped you a like :)
@MarkCoreyCopartAdventures4 ай бұрын
Thanks for the comment! I really enjoy doing the work.
@mirandahernan4 ай бұрын
Great video. Where did you get the leads from? Do you have a link?
@MarkCoreyCopartAdventures4 ай бұрын
Easy to find the leads on eBay. Just search for make, model and year. Make sure you compare yours with the pictures from the eBay site.
@calebh30105 ай бұрын
This worked! Really appreciate it! Do you by chance know where the airbag/SRS module is on these?
@MarkCoreyCopartAdventures4 ай бұрын
Yes! It is located under the center console. It is bolted to the floor panel but easily accessible from the driver’s side through the lower console side cover.
@user-he9zt2ey3q5 ай бұрын
Great video, i hope it will work for me as well. God bless.
@MarkCoreyCopartAdventures5 ай бұрын
Thanks for watching.
@Evolve206 ай бұрын
Good video
@MarkCoreyCopartAdventures4 ай бұрын
Thanks for the comment!
@George-mk7lp6 ай бұрын
Is the handle removable ?
@MarkCoreyCopartAdventures6 ай бұрын
Yes. Like most floor jacks, it has a retainer bolt that, once loosened, the handle can be removed.
@monk54707 ай бұрын
Get rid of the music and I might know what your are saying
@user-si1wl8hq2x8 ай бұрын
where is the step bar for passenger side could it possible have been damaged under the truck
@MarkCoreyCopartAdventures8 ай бұрын
It works fine. The battery was dead and it needs power to extend and retract. No damage on this Caddy other than small dents on passenger front fender. I'm driving it now!
@user-qs9ij2wi9w8 ай бұрын
Love seeing this Bro
@johnnysins41588 ай бұрын
It’s going to be $94 for the Black Friday sale.
@stever.99259 ай бұрын
I struggled a little to hear you, plus you have an accent, but I got it. Thank you for all the great info. I just got mine for $99.99.
@anirbano9 ай бұрын
Do you know what the screw on the handle does and where should it be set?
@MarkCoreyCopartAdventures9 ай бұрын
The screw is for volume and flow. Personally, I use it with the screw tightened for more water flow. Thanks for watching!
@renemoore88399 ай бұрын
bad audio......cant hear the words.
@Samuelfish2k10 ай бұрын
Can’t hear you with that dang music playing.
@merphyslaw118110 ай бұрын
Do you leave the engine running while to do this, and, are there any steps that would be different on a diesel motor? Looking to do this on my 2013 F350. Thanks!
@MarkCoreyCopartAdventures10 ай бұрын
No. I start the engine after I finish the rinse. Gas or diesel just be careful around the alternator.
@madwestboy10 ай бұрын
I love gm trucks and suv's
@MarkCoreyCopartAdventures10 ай бұрын
Me too. Thanks for watching.
@CD-wg6hl10 ай бұрын
Hardly saw any foam
@epianguiano788011 ай бұрын
I wonder if it works with liquid fertilizer for plants
@MarkCoreyCopartAdventures9 ай бұрын
I have never tried that but I would assume any mixed liquid would exit the foamer just as soapy water does. Thanks for watching!
@bobadingo11 ай бұрын
Use acetone, it takes about 45- 60 seconds of time.. .
@rexisretro Жыл бұрын
Looks good ill pick it up tomorrow
@MarkCoreyCopartAdventures9 ай бұрын
How did it turn out for you?
@rexisretro9 ай бұрын
@@MarkCoreyCopartAdventures Pretty great foam with all types of car wash. easy to use honestly worth the price 100% obviously not a pressure washer but everyone should have this
@MarkCoreyCopartAdventures9 ай бұрын
@@rexisretro We agree with you! Happy Foaming!
@sjr7822 Жыл бұрын
Why didn't you show the wet setup?
@kevin_ramirez2529 Жыл бұрын
Looks good man
@MarkCoreyCopartAdventures Жыл бұрын
Thanks Kevin! Subscribe to the channel as I add product reviews on the things I personally use to repair my vehicles.
@MarkCoreyCopartAdventures Жыл бұрын
Put more pressure on the top springs to help release the lower one. Doesn't matter which one you start with.
@jimthompson7035 Жыл бұрын
Thank you so much for this, so does the bottom pin release when you release the left side? So do you release the right one first then the left one? I can get the top to release but the bottom one is a PITA
@jimthompson7035 Жыл бұрын
So yes this worked, you are the man. I could not figure this out without your video. Thank you so much
@MarkCoreyCopartAdventures Жыл бұрын
You're welcome! Subscribe as I'm always showing a few shortcuts!
@wiskyd Жыл бұрын
Sylvania makes a great kit with uv protection, 1 kit does 2x vehicles and last 4-5 years
@terrycalvert7812 Жыл бұрын
Nothing scratches paint as bad as a paper towel does!!
@UpInSmoke5411 ай бұрын
Seriously nothing?? 🤣
@saraloz1 Жыл бұрын
How much are you asking for it?
@MarkCoreyCopartAdventures Жыл бұрын
Great to hear from you. Hope all is well. Asking $26,900. If you're interested, test drive it and we'll talk. Thanks!
@MarkCoreyCopartAdventures Жыл бұрын
Yes. It's a 3 ton jack. Plenty of lifting power.
@debochannel4827 Жыл бұрын
Will this be ok for my chevy avalanche to change a tire?
@MarkCoreyCopartAdventures Жыл бұрын
It's been awhile but I think it went for 17,400.
@stuartcraig6381 Жыл бұрын
how much did it go for?
@TheCoreyHodges Жыл бұрын
$18,900. Winning bid is in the description box.
@ultrakool Жыл бұрын
hardly any suds. don't be stingy with that soap big guy
@tanker242 Жыл бұрын
That headlight does not look brand new, but it does look better… It’s also unprotected now.
@unknownuser8555 Жыл бұрын
Finally smart guy made video about no soap first water first and then soap this covid man i tell you 😅
@andrewwhite1665 Жыл бұрын
Just bought mine yesterday Harbor freight
@danriver3108 Жыл бұрын
Broom and dust pan bro
@RobertMacCready Жыл бұрын
I'd try warm water before the cold water. All the videos (except this one) suggest you use warm water.
@NewHopeCutzandLawnCare Жыл бұрын
I love my Pittsburgh jack. Have that same model to use for my business
Пікірлер
I bought mine last week, I definitely add more soap then that. Works great.
For a better result and more professional, I recommend you sand it before polishing.. 600 grid Dry 400 dry 400 wet 600 wet 800 wet 1000 wet 1500 wet 2000 wet 2500 wet 3000 wet
FYI. 1. There are at least two submodels of this Model 1814E-B dual action orbital washer. They are not the same. Do a KZread search for "Teardown: which Bauer DA polisher from Harbor Freight is better?" to see the difference. 2. Many owners note that the bearing grease used to assemble this model is of poor quality. It is suggested that the first thing new owners do with their new Harbor Freight polisher is to change out the grease. Do a KZread search for "Harbor Freight polisher upgrade" for how-to instructions. 3. Many owners choose to replace the 6" backing plate with a 5" backing plate in order to reduce vibration, improve torque, cooler operation, and for better handling in small or curved surface areas. When purchasing a new backing plate, make sure that you order one with the correct thread size (5/16 in- 24 UNF).
Thank you, been fighting this thing.
Thank you sir!!!
Good job! I would coat that with protectant 😂
these are $40 right now, I'm going to get one tomorrow ... looks really good and I've been happy with the long throw version
Hello my friend There is a car in Nc Concord that I want to bid on, but I am afraid of the rust on the chassis. I want someone to photograph the car from below. Thank you very much.
Thanks for your comment. Actually easier than most think. Just time and knowledge needed!
looks like a lot of work ahead
Thanks! I enjoy the work.
This is a lot of work...But well done! Looks great. Dropped you a like :)
Thanks for the comment! I really enjoy doing the work.
Great video. Where did you get the leads from? Do you have a link?
Easy to find the leads on eBay. Just search for make, model and year. Make sure you compare yours with the pictures from the eBay site.
This worked! Really appreciate it! Do you by chance know where the airbag/SRS module is on these?
Yes! It is located under the center console. It is bolted to the floor panel but easily accessible from the driver’s side through the lower console side cover.
Great video, i hope it will work for me as well. God bless.
Thanks for watching.
Good video
Thanks for the comment!
Is the handle removable ?
Yes. Like most floor jacks, it has a retainer bolt that, once loosened, the handle can be removed.
Get rid of the music and I might know what your are saying
where is the step bar for passenger side could it possible have been damaged under the truck
It works fine. The battery was dead and it needs power to extend and retract. No damage on this Caddy other than small dents on passenger front fender. I'm driving it now!
Love seeing this Bro
It’s going to be $94 for the Black Friday sale.
I struggled a little to hear you, plus you have an accent, but I got it. Thank you for all the great info. I just got mine for $99.99.
Do you know what the screw on the handle does and where should it be set?
The screw is for volume and flow. Personally, I use it with the screw tightened for more water flow. Thanks for watching!
bad audio......cant hear the words.
Can’t hear you with that dang music playing.
Do you leave the engine running while to do this, and, are there any steps that would be different on a diesel motor? Looking to do this on my 2013 F350. Thanks!
No. I start the engine after I finish the rinse. Gas or diesel just be careful around the alternator.
I love gm trucks and suv's
Me too. Thanks for watching.
Hardly saw any foam
I wonder if it works with liquid fertilizer for plants
I have never tried that but I would assume any mixed liquid would exit the foamer just as soapy water does. Thanks for watching!
Use acetone, it takes about 45- 60 seconds of time.. .
Looks good ill pick it up tomorrow
How did it turn out for you?
@@MarkCoreyCopartAdventures Pretty great foam with all types of car wash. easy to use honestly worth the price 100% obviously not a pressure washer but everyone should have this
@@rexisretro We agree with you! Happy Foaming!
Why didn't you show the wet setup?
Looks good man
Thanks Kevin! Subscribe to the channel as I add product reviews on the things I personally use to repair my vehicles.
Put more pressure on the top springs to help release the lower one. Doesn't matter which one you start with.
Thank you so much for this, so does the bottom pin release when you release the left side? So do you release the right one first then the left one? I can get the top to release but the bottom one is a PITA
So yes this worked, you are the man. I could not figure this out without your video. Thank you so much
You're welcome! Subscribe as I'm always showing a few shortcuts!
Sylvania makes a great kit with uv protection, 1 kit does 2x vehicles and last 4-5 years
Nothing scratches paint as bad as a paper towel does!!
Seriously nothing?? 🤣
How much are you asking for it?
Great to hear from you. Hope all is well. Asking $26,900. If you're interested, test drive it and we'll talk. Thanks!
Yes. It's a 3 ton jack. Plenty of lifting power.
Will this be ok for my chevy avalanche to change a tire?
It's been awhile but I think it went for 17,400.
how much did it go for?
$18,900. Winning bid is in the description box.
hardly any suds. don't be stingy with that soap big guy
That headlight does not look brand new, but it does look better… It’s also unprotected now.
Finally smart guy made video about no soap first water first and then soap this covid man i tell you 😅
Just bought mine yesterday Harbor freight
Broom and dust pan bro
I'd try warm water before the cold water. All the videos (except this one) suggest you use warm water.
I love my Pittsburgh jack. Have that same model to use for my business
Does this ship to India?